iCloud Keychain could not be set up with a valid entry

Similar Questions

• Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  XP SP3 system

  I get warnings like this when Mcafee updates.

  Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Process * \SVCHOST. EXE the nest (1632) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Is this a problem Microsoft or Mcafee?

  Do I need to fix?

  In the McAfee forums, there are several similar positions such as:

  https://community.McAfee.com/message/241542

  I'll sue your question on in their community, as they already seem to know about it.

  I would also say that, unless you are very fond of McAfee or you are forced to use it, you plan to replace it with something that has a smaller footprint, uses less resources and doesn't have these problems - something like Microsoft Security Essentials, you can get here:

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  MSE completed with the free version of MBAM and SAS should permanently keep your clean enough unless you're a daredevil like me:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Even if you keep McAfee, I always supplement it with MBAM and SAS since no single AV program does seem to know everything.  If your McAfee of your system is clean, I would interpret that means - McAfee found nothing, says he knows.  It is prudent to use more than a reputable scanner to get more coverage.

  If you choose to spend (and you can't have both at the same time), you must be sure to use the uninstaller that you can get from here:

  http://service.McAfee.com/FAQDocument.aspx?LC=1033&ID=TS101331

  Your system will give you better performance.

• When you try to activate Windows I get an error: Code 45123 could not establish a connection with the activation server.

  the error number is 45123 and said "we could not establish a connection with the activation server." Please give me an answer to this error and try to solve it! If you want I can send you my product key to activate it, but I think it's better on email not here because there are a lot of... the pirates who have access to this site! provide me with an email address and I'll send you my product key and try to activate it and then give me the id I need to enter the activation window! Thank you!

  I solved this problem! Thanks for the help!

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• iCloud sync for notes - two sets of notes on the same account

  Hi, I have something very unusual. In short, some time last year, it looks like notes on an account, which are synchronized in iCloud, split: now, the notes synced to iPhone/iOS or iCloud.com are the same, but they are different from the notes synced on two different Macs (MBA and MBP). Both Mac show the same set of notes - which, again, is different from the whole shown in iCloud and iOS.

  I tried disabling sync on Macs, disabling Notes containers and disabling sync on the iPhone. In cases that made a difference, tried separately and simultaneously. In each case, when the notes are synchronized to iCloud, they continue on this divergent synchronization.

  New changes made on a mac show on another mac, but not iCloud.com or iPhone.

  Changes made on the issuance of iCloud.com/iPhone on the other, but not the MacBooks.

  100% here is the same iCloud account and notes in the Notes application are notes belonging to this iCloud account (indeed, no other account cannot synchronize the notes, besides I have cleared the cache / deleted to force containers). And yet once, it is reproduced on the 2 devices.

  If this account could have really two streams of Notes being synced? What can I do to get it to one on all devices (no need to merge)? Thank you.

  WHAT IOS and OS are you using? If your IOS is the version 9 and Notes iCloud you upgraded, then the computers must be using 10.11 and Notes iCloud upgraded.

• Wireless headset could not be set by default

  Dear friends,

  I have PLT_BB903 + headphones I have for paired with my e6430 latitude, however, on set as my default playback option to have as a default is disable:

  

  I tried to plug it, but seems to have a problem that I could not connect.

  All drivers (audio & Bluetooth) are updated

  Dell Latitude E6430 core i7

  Windows 7 x 64

  with my previous laptop Lenovo T400 who was with Win 7 x 64, I have does not meet this problem, but a simple match, add and do as a default and my helmet ready to use wireless.

  Comments and suggestions to solve my problem is highly appreciated.

  Dear friends,

  I solved my problem by updating my driver Bluetooth (Network_Application_9CP1N_WN_6.5.1.4000_A02), my Bluetooth headset works as expected. I was able to change the default sound and use my devices.

  Thank you very much to you all for the efforts made to solve my problem.

  Special thanks to:

  Jim

  Rick Rockstar

  Shenthil

  MaxD

  more power to all of you guys...

• Could not access vCloud Director with IE

  Hi, I installed vCloud Director 1.5 on my CentOS 6.3 in my lab. I used a Microsoft SQL database. During installation, I tried to set all the parts correctly. Everything was fine and I can launch my Internet Explorer browser and connect to the vCloud Director. I set it up without any problems. I run my lab on vmware wrokstation 8. I closed the CentOS down and all my virtual machines. The next day when I started my VMs and tried to connect to vCloud Director whit IE browser I could not. According to KB: 2005819 my IE is 32 bit, I have JRE and Adobe Flash Player.

  mbayat wrote:

  Hello

  I have attached the file vmware-vcd-support to this post and log files

  Please provide the logs.

  There is an error in the file which indicates what could be the problem. I will quote the message at the end of this post in case anyone is looking for a solution to a similar problem in the future.

  This error indicates that the encryption information in the configuration file of this cell does not match the information that was used to configure (and encrypt the information contained in) your database. For example, when the cell tries to decrypt the information contained in the database, the encryption algorithm fails (which is where the strange sounding "javax.crypto.BadPaddingException: receipt final block not well padded ' error message comes of).

  It is most frequently observed in an environment of several cell when you do not use the response.properties file when you run/opt/vmware/vcloud-director/bin/configure on additional cells. The correct procedure to follow for vCD 1.5 is documented in the 'Installation software vCloud Director on other servers' section on page 31 of the installation and Configuration Guide.

  However, in your case, I suspect the problem that we see here is actually the result of your attempts to debug what was your original problem. When you have installed vCD for the first time, you have run/opt/vmware/vcloud-director/bin/configure (or said 'yes' to a prompt end installation that is in order) which produces an encryption key used to encrypt the different pieces of information in your database. After meeting the initial error, looks like you uninstalled vCD system and re-installed. If you don't have keep the encryption key or empty the database when you do, the second run/opt/vmware/vcloud-director/bin/configure would have generated a different encryption key, which does not allow to read the information stored in the database by the first system.

  At this point, you have two options. If you have the contents of the directory/opt/vmware/vcloud-director/etc of the first installation, you can use those to recover the encryption key and configure the current installation to use this value. If you do not, you can completely clear the database (for example by delete and recreate) and re - run/opt/vmware/vcloud-director/bin/configure which will create a fresh database schema, encryption of sensitive data (new) with the current encryption key. When you do that, you would be able to start the cell (but you can still run in what was your original question).

  Once you are able to start your cell, a person must be able to help debug your problem with IE (assuming that it has not been resolved by the relocation process).

  --

  The message of the complete log which can be used to identify the problem:

  2012-08-30 20:06:58,158 | ERROR    | SpringOsgiExtenderThread-8 | ContextLoaderListener          | Application context refresh failed (OsgiBundleXmlApplicationContext(bundle=com.vmware.vcloud.common-util, config=osgibundle:/META-INF/spring/*.xml)) | org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'hibernateCacheRegions': Cannot create inner bean 'abstractReplicatedCache$child#7f32e233' of type [com.vmware.vcloud.common.ehcache.ReplicatedEhCacheFactoryBean] while setting bean property 'sourceList' with key [0]; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'abstractReplicatedCache$child#7f32e233' defined in URL [bundleentry://169.fwk722090788/META-INF/spring/common-persist-context-cache.xml]: Cannot resolve reference to bean 'cacheManager' while setting bean property 'cacheManager'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'cacheManager' defined in URL [bundleentry://169.fwk722090788/META-INF/spring/common-persist-context.xml]: Invocation of init method failed; nested exception is net.sf.ehcache.CacheException: Problem creating connections: Error decrypting data.    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveInnerBean(BeanDefinitionValueResolver.java:281)    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:120)    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveManagedList(BeanDefinitionValueResolver.java:353)    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:153)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1325)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1086)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:517)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)    at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291)    at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)    at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288)    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190)    at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:563)    at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895)    at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.access$1600(AbstractDelegatedExecutionApplicationContext.java:69)    at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext$4.run(AbstractDelegatedExecutionApplicationContext.java:355)    at org.springframework.osgi.util.internal.PrivilegedUtils.executeWithCustomTCCL(PrivilegedUtils.java:85)    at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.completeRefresh(AbstractDelegatedExecutionApplicationContext.java:320)    at org.springframework.osgi.extender.internal.dependencies.startup.DependencyWaiterApplicationContextExecutor$CompleteRefreshTask.run(DependencyWaiterApplicationContextExecutor.java:132)    at java.lang.Thread.run(Thread.java:662)Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'abstractReplicatedCache$child#7f32e233' defined in URL [bundleentry://169.fwk722090788/META-INF/spring/common-persist-context-cache.xml]: Cannot resolve reference to bean 'cacheManager' while setting bean property 'cacheManager'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'cacheManager' defined in URL [bundleentry://169.fwk722090788/META-INF/spring/common-persist-context.xml]: Invocation of init method failed; nested exception is net.sf.ehcache.CacheException: Problem creating connections: Error decrypting data.    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:328)    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:106)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1325)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1086)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:517)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveInnerBean(BeanDefinitionValueResolver.java:270)    ... 19 moreCaused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'cacheManager' defined in URL [bundleentry://169.fwk722090788/META-INF/spring/common-persist-context.xml]: Invocation of init method failed; nested exception is net.sf.ehcache.CacheException: Problem creating connections: Error decrypting data.    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1420)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)    at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291)    at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)    at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288)    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190)    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:322)    ... 25 moreCaused by: net.sf.ehcache.CacheException: Problem creating connections: Error decrypting data.    at com.vmware.vcloud.common.ehcache.ActiveMqCacheManagerPeerProviderFactory.createCachePeerProvider(ActiveMqCacheManagerPeerProviderFactory.java:77)    at net.sf.ehcache.config.ConfigurationHelper.createCachePeerProviders(ConfigurationHelper.java:282)    at net.sf.ehcache.CacheManager.configure(CacheManager.java:319)    at net.sf.ehcache.CacheManager.init(CacheManager.java:237)    at net.sf.ehcache.CacheManager.(CacheManager.java:210)    at net.sf.ehcache.CacheManager.create(CacheManager.java:517)    at org.springframework.cache.ehcache.EhCacheManagerFactoryBean.afterPropertiesSet(EhCacheManagerFactoryBean.java:103)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1477)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417)    ... 32 moreCaused by: javax.jms.JMSException: Error decrypting data.    at org.apache.activemq.util.JMSExceptionSupport.create(JMSExceptionSupport.java:49)    at org.apache.activemq.ActiveMQConnection.syncSendPacket(ActiveMQConnection.java:1255)    at org.apache.activemq.ActiveMQConnection.ensureConnectionInfoSent(ActiveMQConnection.java:1350)    at org.apache.activemq.ActiveMQConnection.createSession(ActiveMQConnection.java:300)    at org.apache.activemq.pool.SessionPool.createSession(SessionPool.java:108)    at org.apache.activemq.pool.SessionPool.makeObject(SessionPool.java:76)    at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:974)    at org.apache.activemq.pool.SessionPool.borrowSession(SessionPool.java:54)    at org.apache.activemq.pool.ConnectionPool.createSession(ConnectionPool.java:108)    at org.apache.activemq.pool.XaConnectionPool.createSession(XaConnectionPool.java:52)    at org.apache.activemq.pool.PooledConnection.createSession(PooledConnection.java:141)    at org.apache.activemq.pool.PooledConnection.createTopicSession(PooledConnection.java:137)    at com.vmware.vcloud.common.ehcache.ActiveMqCacheManagerPeerProviderFactory.createCachePeerProvider(ActiveMqCacheManagerPeerProviderFactory.java:69)    ... 40 moreCaused by: com.vmware.ssdc.util.crypto.CryptoException: Error decrypting data.    at com.vmware.ssdc.util.AesEncryption.Decrypt(AesEncryption.java:137)    at com.vmware.ssdc.util.AesEncryption.Decrypt(AesEncryption.java:150)    at com.vmware.vcloud.jms.activemq.impl.SystemUserCellBrokerAuthenticator.getBrokerSystemUserPassword(SystemUserCellBrokerAuthenticator.java:57)    at com.vmware.vcloud.jms.activemq.impl.SystemUserCellBrokerAuthenticator.doAuthentication(SystemUserCellBrokerAuthenticator.java:75)    at com.vmware.vcloud.jms.activemq.impl.CellAuthenticatedBrokerFactory.doAddConnection(CellAuthenticatedBrokerFactory.java:183)    at com.vmware.vcloud.jms.activemq.impl.CellAuthenticatedBrokerFactory.access$100(CellAuthenticatedBrokerFactory.java:44)    at com.vmware.vcloud.jms.activemq.impl.CellAuthenticatedBrokerFactory$1.addConnection(CellAuthenticatedBrokerFactory.java:102)    at org.apache.activemq.broker.MutableBrokerFilter.addConnection(MutableBrokerFilter.java:89)    at org.apache.activemq.broker.TransportConnection.processAddConnection(TransportConnection.java:686)    at org.apache.activemq.command.ConnectionInfo.visit(ConnectionInfo.java:134)    at org.apache.activemq.broker.TransportConnection.service(TransportConnection.java:308)    at org.apache.activemq.broker.TransportConnection$1.onCommand(TransportConnection.java:182)    at org.apache.activemq.transport.ResponseCorrelator.onCommand(ResponseCorrelator.java:109)    at org.apache.activemq.transport.TransportFilter.onCommand(TransportFilter.java:68)    at org.apache.activemq.transport.vm.VMTransport.iterate(VMTransport.java:204)    at org.apache.activemq.thread.PooledTaskRunner.runTask(PooledTaskRunner.java:122)    at org.apache.activemq.thread.PooledTaskRunner$1.run(PooledTaskRunner.java:43)    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)    ... 1 moreCaused by: javax.crypto.BadPaddingException: Given final block not properly padded    at com.sun.crypto.provider.SunJCE_f.b(DashoA13*..)    at com.sun.crypto.provider.SunJCE_f.b(DashoA13*..)    at com.sun.crypto.provider.AESCipher.engineDoFinal(DashoA13*..)    at javax.crypto.Cipher.doFinal(DashoA13*..)    at com.vmware.ssdc.util.AesEncryption.v2Decrypt(AesEncryption.java:172)    at com.vmware.ssdc.util.AesEncryption.Decrypt(AesEncryption.java:131)    ... 19 more
  

• Essbase Studio Error (1021001): could not establish a connection with SQL data

  Hello.
  
  I try to deploy a cube Essbase Studio but I get the error: "* Error (1021001): could not establish connection to the SQL database server."
  
  My environment is Linux 5, Oracle 11 g and EMP 11.1.1.2. Database Oracle and Essbase has been installed with different users. The .bash_profile to hypadmin user (i.e. install Essbase) I put the following variables
  
  ORACLE_BASE=/U01/app/OracleDB/product/11.1.0
  ORACLE_HOME = $ORACLE_BASE/db_1
  LD_LIBRARY_PATH = / usr/X11R6/lib: $ORACLE_HOME/lib: $LD_LIBRARY_PATH
  ORACLE_HOSTNAME = DevBi.sigfe2
  PATH = $ORACLE_HOME/bin: $ORACLE_HOME/jdk/bin: $ORACLE_HOME/bin: / sbin: $ORACLE_HOME/opmn/bin: $PATH
  ORACLE_SID = orcl
  JAVA_HOME=/U01/app/InstallFiles/JDK1.5.0_19
  
  
  In my pc (windows xp), I can open the Essbase Studio console, the connection to the Oracle server, get the tables and create a minischema of measures and hierarchies (I can see the preview of hierarchies). I also can create cubes with EAS and can connect with MAXSHELL to essbase.
  
  When I try to deploy the cube of Essbaes Studio there get the error ' Error (1021001): failed to establish connection to SQL Database Server.
  
  The Essbase Studio log file says:
  
  + 12: 40:16 24/07/09 (admin-1) NEWS beginning hierarchical creation in the database "5.4.0.41:1423.POC_ESS. POC_ESS1 '... +»
  + 12: 40:16 24/07/09 (admin-1) FINA signed on Essbase by CSS token "5.4.0.41:1423" successfully... +.
  + 12: 40:16 24/07/09 (admin-1) building INFO Start dimension 'DM_CIUDADES'... +.
  + 12: 40:16 24/07/09 (admin-1) MAS FINA start creating rule file... +.
  + 12: 40:16 24/07/09 (admin-1) INFO SQL statement was created and implemented rule /home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ file «»
  + 12: 40:16 24/07/09 INFO (admin-1) the query is "SELECT (CONCAT ("reg_", CAST (cp_105." ((ID_REGIONPADRE' AS VARCHAR2 (1000))) as 'REGION_PADRE', (CONCAT ("reg_", CAST (cp_105. (("' Be ' AS VARCHAR2 (1000))) as 'REGION_HIJO', cp_105. "' DE_REGION ' as 'REGION_HIJO. Defaults to"GO"POC ". "" Cp_105 ORDER BY DM_REGIONES_ESS3 cp_105. "" CSA DE_NIVEL ', cp_105. "" CSA ID_REGIONPADRE ', cp_105. "' BE ' ASC ' + '.
  + 12: INFO file 40:16 24/07/09 (admin-1) rule has been created and saved as "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ ".
  + 12: 40:16 24/07/09 (admin-1) FINA Essbase starts to add members to DM_CIUDADES dimensioin based on the rules file. +
  + 12: 40:16 24/07/09 (admin-1) ADVERTENCIA (1021001): error al set conexion con el servidor SQL databases. Check out el registro for more information. +
  + 12: 40:16 24/07/09 (admin-1) ADVERTENCIA essbaseDriver.FailedToBuildDimensionException +.
  + 12: unexpected exception SERIOUS cubes from 24/07/09 (admin-1) 40:16 + EssbaseExport to be deployed
  -Exception-
  com.hyperion.cp.datasources.export.essbase.EssbaseDriverException: could not deploy Essbase cube
  ....
  
  
  Thank you for everyone who has an idea to help me solve this problem.
  
  A.S.

  Hello

  If you type database SID lowercase, try entering ITO uppercase. Strange, but my colleagues and I encounter this behavior several times.

• Why iCloud Keychain does not contact ID to autofill info connection?

  This seems to be a painfully obvious question but there is no information about it anywhere. If I'm using my iPhone and I put my camera down unlocked or give to a friend to use, what is to stop someone from loading, say, my banks website and (I'm stupid enough to save my banking log in info to iCloud Keychain) and auto-fill just my journal saved information and access my bank accounts? This seems to be such blatant forgetfulness. Why is there not a "Touch ID Required" warning when selecting "fill automatic password" using safari?

  Send feedback to Apple. They will not respond, but at least know that there is a problem. If enough people send feedback, it can become the problem solved as soon as possible.

  Your comments

• Windows 8 app Store could not update the app with error code 0 x 80070057

  Hello

  I have an application that I downloaded from the App Store of Windows 8 (RTM version), who has recently had an update, but Windows Store could not be updated and returned the error code 80070057 0 x.  But after the update failed, Windows Store still lists old as installed APP and calls the updated application.  I tried reapplying the update but it keeps fails with the error 0 x 80070057.  I tried to look for ways to uninstall it, but the Live tile has been removed from the home screen (not listed under all the Apps either), so there is no way to uninstall it.  Now I'm stuck with Windows Store perpetually asking the updated application.
  Does anyone know how to uninstall a Windows 8 application without the Live tile?  Thank you.

  Open Explorer and in the navigation bar, type \AppDatausernamec:\users\

  Replace username with your actual user name, for example c:\users\debbie\appdata

  It is a hidden folder, you cannot display it by default unless you authorize the display of hidden folders.

• Entry keyDir MOMENTUM could not be set

  Hi all, I just deal with a mistake "entered keyDir MOMENTUM could not be defined" when trying to install the John Galt Add-in for MS excel. I use Windows Vista 64 bit, please help me. Thank you

  Excel:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861099.aspx

  Forums help Excel at the link above

  They will help you with your questions Excel when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Keep getting a memory could not be written error with Acrobat Pro XI

  Hello

  Below is the error I keep seeing on my windows 7 Adobe Acrobat Pro XI enforcement machine. It happens with any PDF that I opened and when it pops up it force closes xi pro adobe acrobat and does not allow me to save all data before it happens. In general, it gives me 20 seconds before it closes so if I am fast enough I could save it, but it does every 5 minutes or more.

  

  Things I've tried...

  1 tried to use the cleaning of adobe tool to uninstall acrobat adobe pro xi completely from the computer, rebooted, reinstalled (same error at the same place)

  2. tried using forefront endpoint protection for not full system scan (what we use in our company) - no viruses (same error at the same place)

  3 tried to delete the user profile that has the question on our machine of the company, the addition of a new blank profile with acrobat (same error at the same place)

  4. I tried to reinstall windows (wipe everything) and reinstall acrobat (same error at the same place)

  5 tried to run memtest for my RAM and RAM integrated test tool, no error on RAM (same error even location)

  6. replace the RAM and motherboard in case there was a problem of memory onboard (same error even location)

  7. now, I gave the user a ready computer, same configuration and it works fine. No other program gives this error, but Adobe Acrobat Pro XI, and now I have a second user with a new laptop Dell get this error at the same place.

  We have a lot of users on the site using Acrobat if it was only 2 of a possible 3 k users having this same exact error, so don't know why it does on 2 completely different computer types. Any suggestions would be most useful at that time I tried registry fixes, changes to "memory could not be read error" but that does not help that I found on this forum.

  Thank you!

  -Troy

  Hi Troy,

  I see that you have completed the major part of the basis of troubleshooting.

  Please contact support for more advanced troubleshooting.

  Contact the customer service

  Kind regards
  Rave

• "Cannot complete order because the extension could not be loaded." with the sample CEP5

  Hello

  I have trouble with my extension porting to CEP5. I get the error message "Cannot finish order because the extension could not be loaded." when I open the Panel.

  Is it possible to get more information about what happened and why? My post was properly signed zxp and managed Extension installed without problem.

  Also, to debug the problem, I tried to open the Test HTML CEP Extension - https://github.com/Adobe-CEP/Samples/tree/master/CEP_HTML_Test_Extension_5.0

  I copied on '~/Library/Application Support/Adobe/CEP/extensions/com.adobe.CEPHTMLTEST ", created .debug inside (https://gist.github.com/m6k/39a49786b7a85a9e312b), empty the file inside Photoshop CC 2014.app .debug (to remove the verification of the signature). When I open Photoshop CC 2014, I see test listed in menu extension panels, but when I try to open them, I also get the error "cannot complete order because the extension could not be loaded.".

  
  

  No reference to what I'm doing wrong and what I can do to debug this problem?

  
  

  Jan
  

  Please read this: Adobe Extension Builder and Creative Cloud 2014

• Could not import the RAW with LR4

  I have done the trial LR4... before LR3 and 1.  Could not import raw with 4 files.  MSG comes up saying, "After files were imported not because they cannot be read."  The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device.  Fine imports by iphoto.  I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted.  I had with iphoto, but they import them in a file on my desktop and then import from the desktop.  Tried this time, but the import column does not appear same office option.  And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help!  (PLEEEZZZ!)  Thank you!

  Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.

  King Tut mummy

  Post edited by: mother of King Tut\

  Quote 'Suite of files were not imported because they cannot be read.

  Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.

  Make sure you have full read/write access to all drives/folders, you work with.

• Could not find the problem with the sound and speakers

  Hi, I have a Pavilion dv7 with windows 7 and there is the sound of the computer, commissioning, but if I try to watch a video or listen to music online there is no sound. Also if I open Itunes, and I press play on a song of the song does not play. I tried using media player but it says it can not play either.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58226.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K