iCloud on two devices

Similar Questions

• can I save two devices on a single iCloud?

  can I save two devices on a single iCloud?

  Yes, if they use the same account Apple ID (iCloud).

  http://www.Apple.com/icloud/Setup/

• Help! My icloud is connected on my two devices (iphone and ipad). I want my iphone photos to syncronyze with my ipad. But I don't want the photos from my ipad to sync with my iphone. What can I do?

  Help! My icloud is connected on my two devices (iphone and ipad). I want my iphone photos to syncronyze with my ipad. But I don't want the photos from my ipad to sync with my iphone. What can I do?

  iCloud is not configured in this way. If you are connected with the same Apple ID, photos from the two devices will be synchronized to iCloud and vice versa.

• I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  How to use several devices iPhone, iPad or iPod with a computer

  Using more an iDevice on the same computer

  This mainly applies to couples who add another device and don't want their electronic mail, messages, etc. being duplicated on both devices. To start reading: How to use several iPhone, iPad or iPod devices with one computer. You must create a login separate Apple and password for anyone who will use the new iDevice. See Apple - my Apple ID and frequently asked questions about the Apple ID. The easiest way is to do it on the computer using iTunes: iTunes - how to set up an Apple ID iTunes.

  On the computer, create a new user account for the person with the new iDevice. This is the user account always uses this person. He or she will no longer use the other user account. This way the person will have a separate iTunes library. Note When finished, do not 'share' apps under a single Apple ID. Each of you must buy your own applications under your own Apple ID. When you decide to divide like this you will have to buy new applications they want to use.

  First, transfer the new devices to a new account as well as all your data.  Save pictures of flow picture you want to keep for your camera (unless they are already in the camera roll) by opening your Photos app, tap Albums icon at the bottom. Now press the album My Photo Stream; Press Select; tap the photo you want to select. tap the share (box with the face up arrow) in the lower left corner icon; in the film, and then click Save.

  If you synchronize notes with iCloud, you want to keep, you must open each of your notes and email it to yourself. Later, you can copy and paste the text into the new notes created in your new account.

  Tap Settings > iCloud > remove account (removes it only from this device, not iCloud; the person who maintains the current account is not affected) provide the password to disable find my phone and choose to keep on my iDevice when prompted.  Sign in with another Apple ID to create your new account. Choose merge to download your data.

  Once you are on separate accounts, you can each go to icloud.com and remove data from the other person to your account.

  The above was created by the user randers4. Changes were made to improve the readability and the syntax.

• two device to listen to music online at the same time

  I have only one subscription, but I can't listen to music online of my two devices at the same time... If I buy the family pass... could do?

  Thank you, Diego

  Hello desorejonaremos,

  Thank you for using communities of Apple Support.

  If I understand your message that you are not able to listen to your music on two different devices at the same time. With an individual membership of Apple's music, you can play music online 1 device at a time. It also allows you to play your music offline for up to 10 devices. If you want to listen to your music online from multiple devices at the same time, a family membership will give you this ability for up to 6 devices.

  This article presents additional information on the operation of Apple's music with a family membership:

  On the Apple music

  With a family membership at Apple music, families of up to six people can enjoy all the benefits of Apple music, each with their own library.

  To use a family membership, you must first set up sharing of family. Then, when you join Apple music, choose a family membership. When your family members join music Apple, they must use the same ID share Apple they used to join the family. After they join Apple music and you connect with Apple ID them, they will automatically be added to your family members.

  You can also change for a family membership when you you affiliate.

  Best regards.

• iCloud on two iPads file shows different content

  I am connected to the same account iCloud on two iPads (Air and Pro).  The records and documents shown on two iPads are different: some folders and their content is the same on two iPads, some folders appear on an iPad, but not the other, and in some cases, a documents folder contains various documents two iPads.  (E.g., 4 documents on the Pro and 18 air - same folder however).   I can't get the two instances to iCloud to show the same results on two iPads.

  Watch iCloud.com to see which is correct. On the iPad that is out of sync try disabling then in reactivating iCloud by car, you can restart between these operations.

• I need to download my photos on icloud on my device and stop the photos to upload on icloud because my icloud is full and I have a 64GB iphone

  I need to download my photos on icloud on my device and stop the photos to upload on icloud because my icloud is full and I have a 64GB iphone

  On your phone, go to settings > iCloud and make sure that you have downloaded all your photos on your phone. Then click on "disable the iCloud photo library." But even once, make sure that you have all the photos uploaded to your Mac computer or your iPhone.

• A problem with the Safari browser on my two devices

  Hi all

  I'll go ahead and start with my problem.

  I feel something weird with Safari on my two devices (iPhone with latest iOS) + MacBook Pro with the latest OS

  On my MacBook Pro - I can't just load Web pages on my laptop. It just won't let me type in the search bar. Sometimes it is just to show the letters and characters I type on the screen. And it is not also let me browse in new windows. It just doesn't work, and it is strange.

  Here is a video from my computer struggling to open a Web site-> https://www.dropbox.com/s/3ls0unm1ash7vn1/Video%2027-01-2016%2C%2017%2004%2048.m ov? dl = 0

  On my iPhone - I can't load a page. The entire application falls just crashes and I can't even open a Web page...

  What should I do to fix this?

  Thanks in advance

  OS X

  Hey! Take a look at this. This temporary has helped a number of users here. Over time, everything should be resolved then wait for a while.

  A possible solution to the problem of address bar: disable the Safari Suggestions

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  iOS

  Hey! Disable Safari suggestions in Settings - Safari - Safari Suggestions.

  Additional information:

  s-bug-related-to-Safari-suggestions/ http://9to5mac.com/2016/01/27/Safari-on-iOS-and-Mac-Crashing-today-for-many-User

  I hope this helps!

• Do I need two devices of Airport express to extend my Comcast router/modem?

  Hi, can someone tell me if I need two devices Airport Express to extend the range of my wifi using a modem/router to Comcast?

  It all depends on "how" you want to extend the scope of the Comcast modem/router.

  IF... you can locate a single AirPort Express Terminal at the remote location where you need more coverage of wireless signal... And... connect the AirPort Express Terminal to the modem/router using a permanent wired Ethernet cable connection. ... THEN... the AirPort Express can be put in place to create a wireless network using the same wireless network name and password as the modem/router.  When you do this, then the modem/router and AirPort Express will act as a 'great' network with many more.

  IF... you can not run the Ethernet cable from the remote AirPort Express back to the modem/router and leave only it connected all the time, then your only other option would be to use two AirPort Express devices.  An express train would be located near the modem/router and connect using a short Ethernet cable. This Express will be set to 'create' a wireless network.

  The second AirPort Express Terminal can then be configured to "extend" a wireless network and wireless to repeat the signal from the first Express... assuming that the second Express is located where it can receive a strong signal first Express wireless.

• NIDAQmx to simulate synchronized analog input from two devices of simulations?

  I would test synchronized analog input from two MFDs simulated from the NI6225.  I created two devices of simulated able NI6225 & Automation (M & A) and tagged the first NI6225a and the second NI6225b.   M & I created a RTSI cable configuration and added both simulated devices.  However, when you call NIDAQmx C functions in my test code, I get an error condition indicating that the simulations devices are not synchronized.  Before continuing, I would like firstly to confirm if NIDAQmx is designed to

  simulate synchronized the analog input data of two devices of simulations.  If this isn't the case, then it will explain the error condition that I have encountered in my test code.

  Thank you

  Ian

  Hello John and Jared,

  If I remember well used to support the simulated synchronized devices.   I ran various tests this week, but all fail.  I'm going to order/install a RTSI cable and test with physical devices.

  Thanks for your help.  I close this post.

  Ian

• Talk to the two devices at the same time.

  Hello

  I wonder that you could help me with my solution.

  I use GPIB to talk to two devices. I need to reset and align a device and control unit B. The process can take up to 2 minutes. Process B is to refresh of the ESA to the required temperature and it can take up to 3 minutes to reach the required temperature. To monitor these processes I use the pull method and:

  • for the process to use the STATp.: COND? query (is this 1?)
  • V use TEMP for the process? query (get the temperature, is the answer within the limits of output?)

  Now, these processes one by one. But, because the two processes must be done every time before HAD tested (as part of an implementation of the test procedure), I would like to take some time to test. Technically, the two processes are independent, I can trigger them almost at the same time and wait when the plu completes itself, and pass them to the part of the tests.

  However, the first attempt to go has failed. When I published the STATp.: COND? query to the breast of the connection to the device has what looks like all GPIB bus is blocked and I cannot issue the TEMP? mark on the device B, as the bus seems to be waiting for the STATp.: COND? command sent to the device has to finish.

  Strange thing is that then I throw the STATp.: COND? order for the first time, the device is not able to accept all other orders.

  Why?

  What is the right approach to this test time saving?

  Asking a statusbyte shouldn't block the system, because it must be managed in the external chip GPIB devices.

  So use the "VISA read STB" instead of * STB via via writing.

  

  This function is located in the VISA palette

• Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Take a look at the following article that may help you.

  http://community.us.PlayStation.com/message/2371488

  I recommend you contact Sony support teamfor further assistance.

• Two devices in the file Explorer

  Hello!

  Today, I recognized that my Fuze is represented by two devices (with two different drive letters) in the file Explorer. The first device is named "SANSA FUZE" and can be opened, the other has no name and only an error message appears when I try to open it.

  I tried with two windows machines, on both the two devices will appear.

  OK, everyhing works fine, but I'm confused because of two devices. Is it OK or is it a mistake with my rocket?

  Thank you

  Stefan

  Both devices are Sansa internal memory, then the expansion of the SD port.

  With no card inserted, Windows will ask "Please insert support" or indicate that the volume "cannot be opened.

  Bob

• I have a question about Adobe TDC license on two devices.

  I have a question about Adobe TDC license on two devices.

  I want to use Adobe of the COMMON tariff on both devices.

  and I heard that it is possible.

  but I need an official document from Adobe.

  You know this part please address the link or documents, please.

  Thank you.

  Best regards.

  Hello

  You can install and activate a license creative cloud on 2 computers, regardless of their operating system. But you must use one at a time, in other words you should not share your license with another user. A license is for a user that can be used in different places as the home and office.  However, creative team of cloud subscription, you can have multiple licenses under a subscription that you can assign to users. You can consult the following links. Answer to your question is mentioned in the first link.

  Adobe Creative Cloud FAQ

  Licensing and terms of use | Adobe

  You can also check the following links for creative team of cloud and management licenses

  Creative cloud for teams. Adobe Creative Cloud for businesses

  Manage your cloud of Adobe Creative for the composition of teams

• Can I use CC on more than two devices (I have 3 Mac and 1 PC in the House) if I deactivate those that I do not?

  Can I use CC on more than two devices (I have 3 Mac and 1 PC in the House) if I deactivate those that I do not?

  Thank you

  Hi ingrid,.

  You can use Adobe Creative cloud on 2 machines.

  If you disconnect from the creative cloud on 1 machine which you use so you can activate it on another computer.

  Please see the help document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  Kind regards

  Sheena