ICloud received Alias not recognized on devices not connected to iCloud

Similar Questions

• Epson-Scanner: attempt at analysis and I get: interface: not connected, option: unknown

  attempt to analysis and I get: interface: not connected, option: unknown

  Yes, 64-bit. I downloaded the correct drivers

  Right - we have established that.  What I asked (or thought I asked, sorry for any confusion) was the seocond time:

  Is the error you receive [interface: not connected, option: unknown] from a native Windows application, you are running OR the scanner utility Epson or som another application?

  I ask because it is important to know which application is gving you the error because those who are integrated into the code, usually.  The errors mean more if you know the name of the application giving error while looking for the error itself.  Epson has what he calls, "Epson Stylus NX300 and NX305 EPSON Scan Utility" and I was trying to establish whether it is what you use when you try to scan and so what gives you the error [interface: not connected, option: unknown] you have found?

  For example, a google search for:

  the Epson scanner interface: not connected, option: unknown

  Give some success (including this conversation.)  You may need to contact Epson directly support to help with it.

• iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

  So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong.  Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?

  A new phone will be iOS10.  iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• IPhone will not connect to iTunes - "invalid response received from the device."

  After years of work very well, I went to put some new music on my phone and all of a sudden got this message "iTunes could not connect to the iPhone 'IPhone of David Platts' because an invalid response was received from the device."?

  I've tried different USB ports, different cables (some Apple official, some after market) and several reboots, but nothing works.

  I'm 10.7.5 OSX and IOS 10 phone you.

  Thanks for the help.

  You have a problem.

  It is good that you have told us you're OS x 10.7.5 (current is MacOS 10.12), because it is your problem.

  iOS 10 requires iTunes 12.5.1 or later to communicate.  iTunes 12.5.1 requres OS X 10.9.5 or later version.

  It's (time to upgrade the operating system of your Mac spent).

  macOS - official Apple Support

• iTunes could not connect to the iPhone, because an invalid response was received from the device.

  Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

  You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

  iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

  You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• iPhone not recognized (no device found) in iTunes and Xcode

  Data sheet:

  1. MacBook Pro (13 inch, late 2011)
  2. OS X El Capitan (Version 10.11.4)
  3. iTunes (12.3.3.17)
  4. Xcode (Version 7.1.1)
  5. iPhone 4S (iOS 9.3.1)

  Problem statement:

  1. My iPhone doesn't appear in iTunes or Xcode whenever I have it plug it into my mac directly via the usb cable. The Photos app connects and clearly shows that the list of my iPhone photos.
  2. iPhone appears in information system under the USB section.
  3. I have the latest version of iOS and OS x and Xcode and iTunes.
  4. Strange, when I connect my iPhone to a Windows computer, the iTunes in this PC recognize and display devices, and I'm able to sync.
  5. I have been dealing with this problem for almost 3 days now.
  6. Of course, I'm confident the computer to the iPhone when the alert on the computer appears.
  7. When I connect my iPhone to another Mac, it is recognized and the synchronization works.
  8. When I put my iPhone in my device iTunes recovery mode displays and is recognized and I am asked to update or restore. I've done both but my iPhone restarts in the middle of the process and gets not even recognized because it comes out of the iPhone recovery mode.
  9. Wireless mouse connected to my mac via USB works in all ports.
  10. I have USB 2.0
  11. I encounter the error "Could not connect to the device", "Could not connect to this iPhone"iPhone"and"Operation timed"out from iTunes."
  12. It seems that this problem arises with El Capital because I'm able to connect to iTunes and Xcode with Maverics last few months. Only, I returned again a coding in Xcode after a few months break and noticed the problem when I'm about to deploy my application for iPhone.

  What I've done so far but did not work:

  1. Change usb port
  2. Restarted mac, iTunes, iPhone and Xcode.
  3. Downgraded to the lower version of iTunes (12.1). I put it to the later version on light that it did not work.
  4. Use different cables
  5. iPhone in Recovery Mode
  6. Reset the SMC, PRAM, NVRAM
  7. Reset the settings of my iPhone (reset all settings)
  8. Clear/var/db/lockdown folder content
  9. sudo kextload /System/Library/Extensions/AppleUSBEthernetHost.kext and uninstall and then install the latest version of iTunes
  10. sudo launchctl stop com.apple.usbmuxd out iTunes and open it again.
  11. sudo nvram boot-args = kext-dev-mode = 1
  12. Disable the system full protection
  13. Uninstall my antivirus
  14. Created another admin account in my mac and I tried to plug in the unit.
  15. Searched the net for different solutions.
  16. installed anti malware and scanned mac.

  Hoping that someone could enlighten and lead with this problem.

  Finally solved the problem in replacement of my old usb cable with a newly purchased on Apple Store.

• USB device not recognized. unknown device

  USB device not recognized, peripheral unknown.  I can not connect any USB

  If no USB device does not is that you need to install drivers of motherboard (chipset) or your USB ports on the motherboard failed. Since you have told us nothing about your computer, it's as specific as I can get. See the links in general troubleshooting below and if they do not help, post back with the missing information by:

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting USB by Uwe Sieber -http://www.uwe-sieber.de/usbtrouble_e.html

  General USB troubleshooting in Windows XP -http://support.microsoft.com/?kbid=310575

  MS - MVP - Elephant Boy computers - don't panic!

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• We get the popup "USB device not recognized", when nothing is connected.

  Original title: pop up message

  I connected the USB cord to transfer information from your old phone to new phone via Itunes.  Since that time that I keep getting a pop up message that says: device not recognized USB, the defective device, windows does not recognize.  Nothing is plugged in, but message appears every few seconds.  How can I get him to stop?

  Hello

  It seems that you are getting the popup "USB device not recognized", when nothing is connected.

  What is the brand and model of your computer?

  I suggest to uninstall the USB controllers and check if you get the context menu.

  
  

  Method 1: Remove and reinstall all USB controllers

  
  

  a. clickStart, type devmgmt.msc in the start search box and press ENTER.

  b. expandBus USB controllers.

  c. right-click on each device under theBus USB controllers node and then click Uninstall to remove them one at a time.

  d. restart the computer, and windows will install the rear USB drivers.

  If reinstalling USB host controllers fails to resolve the issue, go to method 2.

  Method 2: See the procedure suggested by johnkelly46 responded on October 26, 2009, from this link.

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.

  Original title:

  Try to connect Huawei Sonic to win7x64 pro edition using bluetooth.  Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.  How do I overcame the problem of connection I want to transfer photos from phone to PC?

  Hello

  1. are you able to communicate and share with other Bluetooth devices?

  2. what happens when you transfer files?

  3. do you get an error message?

  4 you did changes to the computer, before the show?

  Method 1:

  Connect the phone to another computer and check.

  Method 2:

  If you are unable to connect to another computer, you can contact the manufacturer of the phone and check.

  http://support.Huawei.com/support/

• Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

  Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

  Hello

  Since you said it worked very well recently, I'll try to do a system restore at this point in time.

  See this link: http://windows.microsoft.com/en-us/windows7/products/features/system-restore?SignedIn=1

  In addition, see the response of the Meghmala and follow the instructions listed there. I think that the three method might be the best of the bunch for you, but they have all the right steps.

  See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/usb-device-not-recognized-in-windows-7/8106a712-a13e-4ca5-b82e-c3961cc254b1

• When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer.

  When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer. I use windows 7 on a laptop Pavilion dv7-6b77dx.

  Thank you.  I followed your instructions and it worked.  I am amazed by these forums.  No matter what a person has problems, there is someone out there who has the knowledge and the willingness to share with the less informed.  Thanks again for you information.

  lacroos

• HP Pavilion Notebook - 15_p151: Wi - Fi adapter, not recognized in Device Manager

  Earlier, the laptop was to have very well internet, but after installing a new driver for the Realtek RTL8188EE b/g/n, the adapter has stopped working. Currently, the Device Manager even if hidden devices are displayed in the wi - fi adapter is not demonstrated. If someone can help me as soon as possible it would be greatly appreciated.

  EDIT: After some time, the network has been shown in other devices and now appears under network with an exclamation point cards; When I look at the properties, it says "this device cannot start. (Code 10) This device does not exist. "Looking at my drivers, the current version number is"2012.14.417.2014 ".

  EDIT 2: after the reset, the wireless driver currently said to work by the Device Manager. After a few minutes, the wi - fi adapter ("of which there are two adapter Wi - Fi Realtek RTL8188EE 802.11 b/g/n and Wi - Fi 802.11 RTL8188EE Realtek adapter b/g/n #2 both give")

  Currently, this hardware device is not connected to the computer. (Code 45)

  To resolve this problem, reconnect this hardware device to the computer. »

  Interesting...

  See if this just driver installation replaces the existing one.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149801_1

  You can also try other revisions of the pilot by clicking the history tab of revision on the driver page.

  If it does not, unfortunately, I don't have any other suggestions for you to try.

• Not recognized, USB devices

  Family Vista, PC, downloaded at Acer, chipset had by all the other controls. As this seems to be a persistent problem, Microsft intended to remedy.

  Hello

  Looks like it's a hardware problem.

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  Check with the Acer Support, their documentation and online drivers.

  Check with the Acer support like them would have known problems.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/AC/en/us/content/support

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  -----------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">