Icon data while the WiFi is connected?

Similar Questions

• In the attached VI why looping force the type of data while the other does not?

  In the attached VI why looping force the type of data while the other does not?

  I'm guessing that you have created the Enum on the front panel.  If you right click and create an indicator, it corresponds to the type and be an enum.  LabVIEW represents enums as U16, but because the types are not the same (for example, your enum has 3 values, but a U16's 65 536 values), LabVIEW automatically converts value (or converts) the smallest representation (enum) in the largest value (U16).

• you want to be able to use the wifi to connect with my kindle ebook.

  If someone could help, I am wanting to turn the wifi on my pc (dell inspiron 6400). I want to be able to use the wifi to connect with my kindle ebook. the problem I have is, I bought an audio book through the kindle Bookstore using my kindle ereader. a message came up saying that I must be in a wifi, download area. I suppose that if I activate my wifi, I can be able to complete the download. ?

  Hi Dave88,

  I suggest looking at the support page to see if they have an article or a tutorial on how to do this with your Kindle, Amazon's Kindle:
  http://www.Amazon.com/GP/help/customer/display.html?nodeID=200127470

• Acccess filtered of measurement data, while the program is running?

  My main problem is that data that I take is 3-dimensional. I take measures of resistance, capacity and Q factor over a predetermined period of time, but the problem is that these measures are taken in a matrix of switching through provided pin code sequences.

  If I can take a measure of resistance from pin 1 to 20 pins between 10 am and I want a useful method for displaay these data to the user that the program is still collecting data. I write data to a TDMS file because it is collected, and the output format looks like this:

  

  My thoughts were going to have 4 separate controls that can be set to access specific aspects of the test while it is running to make this work. My idea is to have (4-6) something similar to the below:

  

  In this way the user can refine exactly what they are looking at in this case.

  Key question is whether I should / can:

  1) access to the PDM file for the information you selected with the commands above to fill the Microsoft graph chart?

  (2) the data measured in a wide range of stuff and then have sub - VI that filter of this large table to retrieve the data and complete the Microsoft graph chart?

  (3) another method...

  And advice have enjoyed. Thank you!

  ; How much data are you talking about?  Is - this low enough so that you would be able to keep the table in its entirety in the memory?  If so, then I would use your option 2.  Then design an interface that allows the user to determine what links they want to watch, and your program could analyze through this gathering the data and display it.

  If that's too much data, then you have to go with the PDM or another option of storing files and read the data back to the piecemeal and build your data table that applies to display.

• Flash builder 4.6 - send batch data to the server (php connected)

  Hi, I recently downloaded flashbuilder 4.6 and started developing my first mobile application.

  Just to explain the meaning of my problem/question, I want to manage a local database offline (insert data into a table) and manually sincronize a database server (push a button-> add batch of documents to the Server table).

  Suite of tutorials, I was able to manage a local database sqlite, I had the connection to the database server (mySQL) with php and have populated Data/Services Panel (services test works very well).

  Unfortunately I'm not able to send local data, batch to the server. A few lines of code below (debug I got no error and no results).

  Something wrong in the code?

  Or did I take a wrong way to solve my problem?

  Thanks in advance for your interest

  protected function button_clickHandler(event:MouseEvent):void

  {

  var LocalDatabase:ArrayCollection =... < loaded from the database sqlite >

  var RecordToAdd: MydataTable;    table of server data to fill

  for (var i: int = 0; i < LocalDatabase.length; i ++)

  {

  RecordToAdd = new MydataTable;

  RecordToAdd.Field1 = LocalDatabase [i]. Field1;

  RecordToAdd.Field2 = LocalDatabase [i]. Field2;

  ...

  createMydataTableResult.token = MydataTableService.createMydataTable (RecordToAdd);

  createMydataTableResult.token = MydataTableService.commit ();

  }

  }

  solved...!  .. just had to avoid the null fields in RecordToAdd

• Use the TC for backups only, while the computer is connected to a different network

  Time Capsule version 7.7.3

  I want to be able to make backups without having to connect to its network via wi - fi, because I'm connected to a different wireless network to access the internet.

  I thought that I need to connect the TC to my computer with an Ethernet cable.

  But how to set it?

  Like this.

  Time Capsule using wired for Mac for backup only.

• How can I disable the guest user to close the PC while the Admin is connected?

  I'm running Windows 7 Ultimate. I found out how to disable the guest user closing at all via the local security policy, but then they can't stop even if the Admin account is offline.

  To clarify a bit, say I want to give my PC to someone, I usually click on change user and connect using the guest account. In this way, they can't access my account because it asks for a password. I want that in such a case, they should not be able to stop the PC as my admin account is always logged.

  However, if someone booted the PC themselves and use the guest account, then they should be able to close too, as my Admin account has not been connected.

  I'm running Windows 7 Ultimate. I discovered how to disable the guest user closing all through local security policy.

  It is the correct method. It is as robust as it is unconditional.

  If you want to have your cake and eat it the guest account must use a powerful "agent" to perform the functions of judgment. A scheduled task would be such an agent. It might work as follows:

  1. Create a scheduled task that runs Script1 to perform these tasks:
     -Check if the C:\Shutdown\Shutdown.txt file exists.
     -If not, the output of the script.
     -If this is the case, delete Shutdown.txt.
     -Check if there is an administrator session. If so, the output of the script.
     S ' there is no live administrator session, shut down the computer by using shutdown.exe.
     The task must run under an administrator account once every 3 minutes.
  2. Create a shortcut on the desktop for the Guest user calling Script2 for these tasks:
     -Check if there is an administrator session.
     -If this is the case, create a pop-up to inform the user that the machine cannot be stopped.
     -If it is not, create the C:\Shutdown\Shutdown.txt file. The scheduled task will 'see' this file and will stop the machine.

• Toshiba 32DV502: is it possible to use speakers while the headset is connected

  Is it possible that the loudspeakers of the TV can be activated when you use headphones?
  I use the headset to get a sound in a stereo amp output but I want TV sound when the car radio is turned off.

  The only way it works is to unplug the cable from the headphones.
  The reaso for the use of the headphone output is so I can have a stereo sound during playback of a dvd.

  > Is it possible that the loudspeakers of the TV can be activated when you use headphones?
  No, I don't think that this is possible.

• How to check the data on the device network connectivity

  Hello

  Please suggest me how can I test if the unit is to have internet conectivity or not.

  We tried some of the samples but no use:

  Example 1:

  If (! blackberry.system.hasDataCoverage ()) {}
  Alert ("you are not in the coverage, we will try to send later");
  } else {}
  }

  in the config.xml file

  
    

  Example 2:

  We tried with html5 script but it always returns true.

  If (window.navigator.onLine == false) {}
  }

  For BlackBerry 10, you can use the extension deviceinfo to get detailed information about the State of the network:
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/deviceInfo

  For BBOS, I can't find an extension to give detailed information, but hasDataCoverage should work.
  https://developer.BlackBerry.com/BBOS/HTML5/APIs/BlackBerry.System.html#.hasDataCoverage

  Note that hasDataCoverage is not a function, it is a Boolean property. Your current use:
  blackberry.system.hasDataCoverage)

  Must be:
  blackberry.system.hasDataCoverage

  Can you please try this?

• BlackBerry Blackberry Passport engulfed my data while I was asleep

  My BB Passport engulfed my data while I was asleep and I don't know if it was my camera or my carrier. I called my provider and they said: "Yes your data have been used 3-5 a.m." but they don't tell me how. They suggested that I look at my 'event log' of the phone to see if there was an update to the App. No such thing as 'event log' exists on a passport of Blackberry and the 'Usage.log' file which is generated from the BBlink is empty. Then, on my phone, data services is the position, but it is also connected to the Wifi, the automatic update is disabled and but there is no e-mail or any communication at all. I want to know how this fact happened to prevent it from happening again. My phone is as naked as it came in the BB store. No additional Apps or social media communications. I only use BBM when I am connected to wifi and I use the phone to check my emails (without attachments or anything like that) and make a few calls per month. It is therefore as important as if we actually stole my phone! Any ideas how to solve this problem?

  1 - the device must use wifi if (a) wifi is enabled, (b) there is a connection to a wifi network, and (c) there is a flow of data on the wifi network. If the mobile network is activated, if the data service is activated on the mobile network, and if there is a connection and flow, the unit will switch for mobile if it must. I have no way of knowing what happened or why, only that I'm not surprised.

  2. I don't know what in the stock device software. You can install to alert you, but I've never looked.

  3. I don't think that there is something that has changed.

  4. in the settings of mobile network, you can leave the mobile phone on any network turn off the data. Calls and SMS will work. Data and anything that uses data or any application that can only use mobile data won't work on the mobile network. But if the wifi is enabled, etc. it will be as data on wifi service.

  5 see #4

  6 seriously doubt

  7. I would like to purchase enough mobile data to well exceed what you're likely to use. If this is not possible, then that's a different issue and I know that you do what you have to do. But modern smartphones use a large amount of data for many reasons.

• How to use wifi when connected to another computer?

  I am currently in a situation where I need screen sharing another mac via ethernet with my thunderbolt, while the Wifi adapter. I have a 2014 the computer I want to see is a new Mac Mini and Macbook Pro screen. When we are connected by ethernet, none of my wifi signal works, even if I am logged in. My computer is looking for internet connection coming from the mac mini, but that is not connected to the internet. As soon as I unplug my shot of lightning/Ethernet, then my wifi starts immediately to the top. In any case to be connected to my wifi, as well as the other computer by ethernet at the same time? Thank you

  Steve

  Your description is disconcerting.

  Do not run cables on the carpet between the computers. Connect all devices to your router or switches that connect to your router, or via Wi - Fi to your router.

  You have a SINGLE network. Some devices can be connected by Ethernet and others by Wi - Fi, but it's the same network.  There is no need to have all devices to use the same media. Ethernet is the fastest connection you can do, so if you have an Ethernet connection, Wi - Fi can be "".

  As long as each device can get on the Internet at the same time without rewiring, you can also do a computer connection to computer whenever you want.

• Re: Satellite A30 - battery starts to unload if the power is connected

  Hi all

  My Toshiba laptop Satellite A30-871 began to discharge the battery while the power is connected (the LED shows that AC is connected but laptop consumes the battery power instead of loading battery and the use of current alternative). When the laptop achieved 0% battery turns off. Remove the power plug and reconnect do not resolve the problem, while the computer is turned on, only computer shutdown will begin the battery takes over. Which means that I can use portable so that battery retains some powers. Sometimes, when the laptop is turned off and the battery is charging, battery charging LED starts to blink and I have to remove the power plug and plug back.

  I don "t think it's a bad power connector because the witness indicates the power is connected.

  I wonder if anyone has a solution for me.

  Kind regards
  Nova

  Hello

  Just a question; does the laptop functions and using only the AC adapter (without the battery)?

  If Yes, then I guess that the problem might be related to battery failure.
  Maybe a new battery could solve this problem, but as you know this is just a suggestion

• OfficeJet 6500 e710n: my can´t officejet 6500 detect the wifi router, expire after 20 minutes of searching. The network works

  Hello

  I connected to a router Thomson lapttop two stand-alone and two desktop PC wifi printers. As I can connect to the web

  and surf without problem that the router seems to work at least partially.

  The problem is that printers will not find the router, when I try to configure the printers in the control panel printers, they are looking for the router, but they do not find the wifi (router) connection. After 20 minutes, they then expire without something else facilities worked very well before.

  I called the support to my ADSL provider and they remotely reset the router to factory settings initial but it helps. didn t have tried to turn off the router, printer and laptop computers and then started the router, printers and portable - the same problem. I think that the problem is not in the printers that I have the same problems on both printers.

  Can it be a partial problem with the router, I find that it is unlikely that the problem lies in the printers, because they took place att simultaneously.

  It is a mystery to me and any suggestions are appreciated.

  Bo

  Hello

  It seems more likely that the question is based in your router as the problem affects two different printers.

  For troubleshooting end please move the printer near the router, but not too close... 2-3 meters would be at an ideal distance for testing.

  If you don't see the router yet, may is a Dual Band router?

  It broadcasts at 2.4 GHz?

  Pleae also run a Test report wireless one of the printer, it may help to get a better understanding.

  In the Configuration Menu, select network, go search for Wireless Test report.

  If you can join an analysis of the results of the tests, it would be great.

  Kind regards

  Shlomi

• Can not connect to hp envy m6 to the Wi - Fi connection

  Hi everyone I have a laptop hp envy m6. I can't it connect to my wifi modem/router are in the same room as the laptop, but still no connection, I called Twc (ISP) and no problem on their end. & lt; BR & gt; & lt; BR & gt; The most funny thing is all my other devices (ps3, 4, iPod iPhone, you name it, he picks up the connection) when I use an Ethernet cable with my laptop but I obviously must stay in place & lt; BR & gt; & lt; BR & gt; So if you anyone give a lending hand, I'd be very grateful & lt; BR & gt; & lt; BR & gt; Also before I forget all the all the hp / windows updates have been made, so it is common

  darioblanco82,

  Thank you for the information. Have you had time to try one of the steps in the previous document I sent to resolve universal WLAN errors? Please follow the steps described in this document to make sure that the WIFI network connects correctly.

  Keep me posted on how it goes.

  Good luck!

• What is the way to find out which app is downloading data from the internet?

  Every time I connect to internet, I see that nearly 100 MB of data is is downloaded, without my consent. I did almost all the applications that I know to ask my permission before you download.

  Yet, some applications are downloading data without my consent.
  I would like to know what are the applications that do.

  What is the way to find out which app is downloading data from the internet?

  There is background applications that automatically transfer and receive data when the computer is connected to the internet. Try if there is active apps running.

  1. click Alt + Ctrl + Del to go to start Task Manager / Applications and end unnecessary tasks.

  2. go in Control Panel / programs / uninstall a program and uninstall unwanted programs.

  I hope this helps.