Iconia W510 hold the Windows to connect does not
I have a W510 Iconia, I just put in place. I guess that after some windows updates the home screen has changed because now it's asking me to "and hold down Windows button and press the button to connect.» When I turned on the tablet before I could just slide the screen up and present the login screen. I do not have a keyboard with this tablet, and I can't get the sign on screen to display. No matter how I try, by pressing the Windows and then pressing the power button does nothing. Is there a way to get around this?
Nevermind, I solved this. This is another way to say press ctrl + alt + delete to connect. I had to use the ease of access on the Welcome screen to bring up a keyboard on the screen, and then press ctrl + alt + delete keyboard on the screen to bring up the login screen.
Tags: Acer
Similar Questions
-
Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.
Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3
I hope this helps...
-
How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.
Hi PAtwoodwu,
1. what program are you trying to install?
2. did you of recent changes on the computer?
3 does happen with all programs?
Check and make sure that the Windows service install is running on the computer.
(a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.
(b) right click on the Windows Installer service and then click Properties.
(c) if the box Startup type is set to Disabled, change it to Manual.
(d) click on OK to close the Properties window.
(e) right click on the Windows Installer service and then click Start. The service should start without errors.
(f) click on the file menu, and then click exit.
-
After download of internet explorer 8 every time that it opens, I have to maximize the window, whywill it does not open full screen?
"titch hill" has written in the new message: * e-mail address is removed from the privacy... *
After download of internet explorer 8 every time that it opens, I have to maximize the window, whywill it does not open full screen?
You double click on an icon to open Internet Explorer?
If so, right-click on the icon and select Properties.
Select the shortcut tab.
Change the value of the "run:" Maximized field
Click on apply, then OKNext time that you double-click the icon, it is a maximized window will open.
-
"The Windows update service does not work. Please restart your computer.
If I click on "Check for Updates", a dialog box appears:"The Windows update service does not work. Please restart your computer.
I rebooted several times, but the same error.Help, please.Thanks in advance.This site will help you get the update of Windows running service
http://pcsupport.about.com/od/Windows-8/a/Windows-Update-settings-Windows-8.htm
-
Original title: I do not see my available networks
I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service. Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity. Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)
Hello
1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
2. do you have security software installed on the computer? If Yes, is it updated regularly?3. have you done any software or hardware changes on your computer before this problem?
4. What are the troubleshooting steps you have tried to solve the problem?
Refer to these methods.
Method 1:We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.
(a) click Start, type Services.msc and press enter.
(b) locate the autoconfiguration WLAN service, double-click to open its Properties window.
(c) on the general tab, change the Startup type to Automatic and click on the Start button.
(d) click apply and then click ok.
(e) try to connect to the wireless connection and check the result.
See also:
For more information on the wireless settings, see this link:
http://TechNet.Microsoft.com/en-us/library/ff802404.aspx
Method 2:
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
See also:
Windows wireless and wired network connection problems
Check if it helps.
-
After that the Windows update, Mozilla does not work.
After an update of windows, Mozilla Foxfire does not work. I can type in the address of the site, I would like to see, and absolutely nothing happens after clicking on "search"... It makes me wonder if the update of windows had something in it that blocks for the internet mozilla foxfire 'explorer '...
Try to start Firefox in safe mode:
You can also try resetting Firefox to default settings:
-
The Windows Audio Service does not start
I have no sound at all. Show my audio device is installed and working. I get a message that the Windows audio service and audio end point service Windows (I think (does not start.)
Hi JamesSimpson11759,
· What happens when you try to start the Windows Audio Service? You receive an error message or error code?
· Did you do changes on the computer before the show?
I suggest you to run the Microsoft Fixit and check if the problem still persists.
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
You can also view the article mentioned for more information:
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Let us know the results.
-
The Windows Setup program does not open. Stuck with black screen.
Hi all
I'm trying to install windows 7 from an iso file using Bootcamp assistant, Version 6.0.1 but unfortunately just windows installer does not open so I'm stuck with this black screen. I left my sit MacBookPro autour with this black screen during more than half an hour and after awhile, it gets really hot so I interrupted the "process."
I have reset the NVRAM (command + alt + p + r) which did nothing.
I followed the instructions of bootcamp. I downloaded the correct drivers for my model of mac pro book, I created a bootable and partitioned my drive.
The forum has a lot of "black screen problems" but none of their solutions worked for me.
Any help would be greatly appreciated!
Thank you
1. leave BCA creates the installer from USB, but not to partition your drive.
2. download the correct drivers to install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support and replace $WinPEDriver$, AutoUnattend.xml, and the entire folder on the drive flash USB2 Bootcamp.
3. run BCA, connect the USB cable and click only the Windows Installer and test if the Setup program starts.
-
The Windows Setup program does not start
I'm trying to install 10 windows using boot camp. I'm on a macbook pro retina early 2015 on OSX 10.11.2
I opened the boot camp assistant and it brings me to a screen to select the ISO and partition my drive.
After I choose how I want to partition my drive, it brings me to a screen where it downloads windows supported, copies of windows install files and restarts.
At this point, I expect 10 to start windows installer, however it brings me right to the normal sequence of boot OSX. I tried now option when it is booting, but I only see the OSX disk to start. Then, I go to bootcamp again and it gives me the ability to delete my bootcamp partition. I checked in disk utility, and it seems that the drive is partitioned in fact, but I can't get the windows installer to run and install windows on the new partition.
I was wondering if anyone had questions similar to this.
Thank you!
Please perform the following two procedures...
Reset the management system (SCM) controller on your Mac - Apple Support
How to reset the NVRAM on your Mac - Apple Support
If you have any external storage connected, unplug it during the installation process. New attempt of BCA. You will need to remove the previous partition, and start all over again.
-
Windows Search does not respond when you try to find a file or folder. The Task Manager displays the message "not responding". Is it possible to download a patch for this problem by running Windows XP SP 3?
Hi Carl Kochman,.
1. have you made changes on the computer before this problem?
2. What is the exact error message or error code?Try the following and see if it helps.
Method 1:
Check if the search Windows service is turned on.To do this, follow these steps.
a. Click Start and then click on run
(b) in the Open box, type services.msc and press ENTER.
c. double-click Windows Search.
d. set its startup type to automatic.
e. set the service state to started.
f. click OK. Check if it helps.
Method 2:
Run the System File Checker and check if it helps.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747
Method 3:
Run the Microsoft Safety Scanner and check if that helps resolve the issue.
Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note : the data files that are infected can be cleaned by removing the file completely, which means there is a risk of data loss. -
Hi everyone, my dell inspiron 6400 does not work in normal mode due to a blue screen error 0x0000007E, 0xB8D4278E, 0XBA4CF038 and 0XBA4CED34. It also shows an error igxpmp32.sys. Unfortunately, I complicated issues when I tried to fix it by using a windows installation disc. Now, windows setup wont run on normal mode the blue screen still exists and I can't use safe mode again as custom configuration windows running on safe mode. Help, please
Hello
-Don't you make changes to your computer because of which the question began?
I would recommend that you disconnect all external devices and third-party drivers such as mentioned in this article and check if the problem persists.
-
Network key/password on the Windows XP program does not?
I am trying to reinstall/repair my windows XP program and run on Parallels, but for some reason any the network key/password I provided for the CD does not work this time? These things expire after a while that I didn't take my purchase since installing it 4 years ago. Any help is appreciated. Thank you
Hi Kim,
Are getting you error like "the product key used to install Microsoft Windows isn't valid? If Yes check out: http://support.microsoft.com/kb/883254.
I hope this helps.
-
IES3H no - where on the computer, continues to tell me host Service Windows does not work, and that Windows will notify me when a solution is found. Very confused.
Hello
Please see this thread in the IE Group on this subject:
http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/b2fefc18-79a3-4C3C-a9de-54d1a2062183 Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org -
After that the Windows System Restore does not work
So I tried at my peak of windows 7 on the eve, but he throws it gives me an error saying "can not find script file c\windows\run.vbs" system restore other than that it was just a black screen with my mouse on it. Any help would be appritiated, thank you.
You are able to access safe mode?
If your computer has a single operating system installed, press and hold the F8 key as your computer starts or restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
If you access the safe mode, you can follow the procedure described in the following link to undo the restore point:
http://Windows.Microsoft.com/en-GB/Windows-Vista/undo-system-restore
Maybe you are looking for
-
test hardware mid 2008 mac pro-
My mid summer 2008 mac pro came with Leopard installed - and I upgrade to Snow Leopard. I know for sure that the Snow Leopard hardware test worked by rebooting with the button held down - D but somewhere in the updates of apples - it doesn't work any
-
I could or should use a glass on my 6 s screen protector more? It will interfere with the 3D function?
-
Is it possible to do a test by programming in LabVIEW? The same thing can be done manually in MAX. I mean when the program starts, it will perform a self-test. If this passes, continue on the rest of the code, in case of failure, bring up a message (
-
my router stop working. quick check it's plug. How can I fix it
I LOST MY ROUTER AND CAN'T MAKE IT WORK HOW CAN I CHECK IT.
-
My number IF is 1253 - 9246.Even but it's on update list I still cannot update my phone. I used the PC Companion and Service Update update method, but he says your mobile is always up to date. Also I did ' t received the message that says you have a