Icons are white or invisible at the start of windows 7.

Similar Questions

• some of my desktop icons are white, how can I solve them?

  the desktop icons are white and must be corrected. How can I solve this problem?

  Hi, Frédéric L.Jackson,.

  1. Did you the latest changes on the computer?
  2. Are you referring to completely white desktop icons or icons changed?
  3. You have security software installed on the computer?
  4. What happens when you try to access white desktop icons?
  5. Are the program of white desktop icons or any file?

  Method 1

  See the link below and run the Fixit tool available, check if it helps.

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 2

  Check if the problem persists in the safe mode and post back with the results.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

   

  Method 3

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Should wait to connect to Windows 7 or icons are white and explore unresponsive

  Sometimes if I don't wait before entering my password when it connects on all icons are white and explorer.exe process stops responding and I have to perform a stop hard if you wait 5 minutes before entering the password then the OS will be boot normally.

  I want help to solve because it's getting very boring
  Thank you, Jason

  Hello JasonWebb,

  Click on the website below and follow the directions on the limitation of the startup items.
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Let us know if that helps with the time of your long connection for Windows 7.

  Thank you

  Marilyn

• igfxext module has stopped working message is displayed at the start of Windows 7. What is c?

  igfxext module has stopped working message is displayed at the start of Windows 7.  What is this and how can I fix?

  Hi Bob Bala.

  
  Thanks for asking this question to Microsoft Community!
  
  As I understand it you receive a startup message all to connect to the computer.

  He would be grateful if you can answer these questions to help you further.

  1. have you made changes on the computer before this problem?
  2. What is the brand and model of your computer?
  
  I would suggest trying the following methods and check if it helps.
  
  Method 1:
  
  You can try to check if the problem occurs in safe mode and check if it helps.
  
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  
  Method 2:
  
  If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.
  
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
  
  Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.
   

• Is it possible to lock the start of Windows 8 on a monitor screen while accessing the office on another?

  Running HP EliteBook 8560w using the screen of the laptop and HP 2709 m as second screen; running Windows 8 x 64. I try to add a third monitor if it is possible to lock the start of Windows 8 on one screen.

  Thank you

  No, it is not possible then.

  But, if she were here, it would have been a great feature.

  Concerning

• All my desktop icons are white and when I try to open it asks me to choose the program to open with

  Mr President I integerated disk magic software in other files, so all the desktop icons become this symbol (magic disc), I was shocked, and remove the software, and then all of a sudden all my desktop icons became white, when I tried to open the file screening choose program to open the with.i don't know what to do.i tried to restore my computer.some error is to stop , the recovery.so please please say all solutions without having to reinstall my os because I have so many files and I do not have any device to backup.so please say solutions

  Original title: problem on my opening program

  Hello

  You can check out the link below which will automatically fix file associations.
  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505

• icons change size and move between the start up... Why?

  I move and resize the icons on my desktop... then, if I stop and restart the computer, the icons are in a different size and location where I want.  What arrangement made change to make that happen? I am the only user on the computer. Vista Home Premium.

  Hello

  I would like the season you try these methods and check.

  Method 1:

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  You can check if you are facing the same question in the user account new or different administrator account. You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• my desktop icons are of normal size, but the image that represents the shortcut that is MSNBC, is very low in the center of the icon

  I have to resize the icons, just the image in them... Thank you!!!

  You can have the Web site icon, but it will be not bigger: it is stuck at 16 by 16 pixels.  This is how the icons on Web pages are programmed.  It's not for lack of Microsoft: it's just the reality of the world.  If you forced the site of MSN icon to be large enough to match the size of the "large" view desktop icons, that's what it would look like:

  

  Of course they don't want people to complain about the ugly tense icon, and since Microsoft cannot replace the icon for each Web page in the world, they simply leave it at the default size so it looks nice.
  Given their big stretch would become extremely blurred, Windows leaves these icons low resolution to their normal size, centered insizing a box.
  >> If you only want it to be as big as XP, you can always do: just to right click on the desktop, select display, then Classic icons... Classic is the size THAT used XP.  Stretched above example is what it would be if you choose Medium or Large inside Windows Vista or 7, which is bigger than anything XP could ever show.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• The image field is invisible at the start?

  I have a combo that changes that change, displays a different image. It all works as planned, I don't want one of the images to be visible until you choose in the drop-down menu.

  Problem is that if I do the invisible images (with presence) to start, they never appear again. I tried their definition to the invisible through the field tab in the script editor as well.

  Anyone have any ideas?

  Rather than set it invisible in the first place, how about leaving visible with an image in there that matches the background of the form to start?

• Computer hangs for 15-20 minutes after the start of Windows - WinXP SP3

  Whenever I start my computer, once Windows has started (all the desktop icons have appeared), my computer treats something for 15-20 minutes, but I don't know what it is.  It freezes my computer for 15-20 minutes.  I don't have a lot of many software installed and there is no popup windows saying that some updates are being installed.  I have Win XP SP 3.  Can you help me?

  Hi KMForward81,

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• Icons are very big and what e-mail reading windows is too large to read.

  My desktop icons are extremely important, and so is my windows email I have hinge performance and personlize a computer. Change the settings I have clicked on 96 and also have to hinge settings and the value 1024 x max settings with no results. What else can I do to fix.

  My desktop icons are extremely important, and so is my windows email I have hinge performance and personlize a computer. Change the settings I have clicked on 96 and also have to hinge settings and the value 1024 x max settings with no results. What else can I do to fix.

  RE: desktop icons too big

  Right-click on an open office space > click View > make your choice... small icons or medium-sized icons.

  RE: too much e-mail

  You have to tell me what mail program you use.
  As Windows Mail, Windows Live Mail, Microsoft Outlook, etc etc.

• Connection to the wireless network trouble at the start of Windows 7

  I have configured my computer will automatically connect to my home network, but at the start, it aims rather to connect to 'SoftAP-C0', a network with zero signal strength that probably belongs to one of my neighbors. It is impossible to connect and displays "waiting for users ' instead of 'connected' or 'disconnected '. I then have to disconnect this network manually connect to my network home and enter the security key. Because my computer never gets to actually connect to the network SoftAP, I can't access the configuration window to disable the automatic connection (if it is still what makes my computer trying to connect to it in the first place.) Is there another way to access its configuration (otherwise than through the network and sharing Center)?

  Hello

  You can see a list of available wireless networks and then connect to one of those networks, no matter where you are. The wireless networks appear only if your computer has a wireless network adapter and driver installed and the adapter is turned on.

  If you want Windows to ask permission before attempting to connect to a wireless access point, you can Turn off wireless on the laptop.

  You can have a switch on the laptop turns off the same. Turning off Wireless is specific to the model of the laptop.

  You can follow the links below to set up your preferred networks.

  How to prevent my computer from switching between two preferred networks?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-prevent-my-computer-from-switching-between-two-preferred-networks

  View your preferred wireless networks

  http://Windows.Microsoft.com/en-us/Windows7/view-your-preferred-wireless-networks

  How to prevent my computer from switching between wireless access points?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-prevent-my-computer-from-switching-between-wireless-access-points

  Hope this information is useful. Please let us know if you need further assistance.

  Concerning

  Rehman - Microsoft Support

• I have 2 windows 8 start after re-installation. How to remove the Starter defective windows 8

  After the first installation of windows 8, I got the error message. My second installation of windows 8 was Ok.

  Now I 2 windows 8 starts, it is OK and the second is defective. How can I remove defective Windows * boot 8.

  Hi Waldemar,

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you get two options of Windows 8 start while connecting to the computer. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  I suggest you follow the steps:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  If you still encounter problem, follow these steps and check if that helps:

  a. boot from the DVD of Windows 8.

  b. click on repair your computer.

  c. click Troubleshooting , and then select Advanced Options.

  d. click on command prompt and type the following commands and press enter after each command:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  e. restart the computer.

  f. check if the problem persists.

  If you are always faced with the question, please respond with more information, and we will be happy to help you.

  Thank you.

• Disable a program to the start menu Windows 8

  I have a desktop HP Pavilion last month. I have a search engine, searchconduit.com, invading my OS. I ran Windows Defender Quick Scan and full Scan, do not show any threat. I want to check the start menu to see if it's there and turn it off. I went to tools and tried to remove it, but the "Delete" button is not active.

  If she is not there, what everyone would say that I do to get rid of this problem?

  Thanks for sharing your knowledge.

  Hello

  There is a good guide on this withdrawal on the following link.  I would just say using the method 1 related to ccleaner and MBAM - also please note that you must use the versions free of these 2 applications.

  http://botcrawl.com/how-to-remove-conduit-search-malware/

  Best regards

  DP - K

• Issue at the start of Windows 7 when you set up windows update

  Every time that turn on the computer (it is a VAIO laptop actually), Windows retains the configuration of updates but rest 0% as forever, after awhile, it says failed to update configuration every time then the computer works normally. Every time as it took me a lot of time.

  Is anyway to fix this? Either fix the bug configuration or removal of this new update so it won't set up the most?

  Hello
   
   

  Method 1.
  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.
  See the article below for additional information and steps.
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2.
  Also you can see the article below for some methods more.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Method 3.

  Check if reset the Windows Update components allow you to install updates correctly.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.