Icons displayed incorrectly at startup, the computer is unusable for several minutes

Similar Questions

• When I connect windows, the hard disk works for several minutes

  Hello

  A few months ago and after installing some windows update (XP Sp2), I see when I login to windows, drive hard work continuously for several minutes and speed goes down.

  What windows software using the hard disk with log in?

  Thanks in advance

  motasemsadelghi

  What you see could be linked to a task that you have schedules (such as anti-virus, defragmentation of the hard drive, etc)

  Check the tab startup in MSConfig for items which currently running as part of the startup of your PC. See

  http://support.Microsoft.com/kb/310560

  The foregoing is for XP, but also applies to Vista.

• The copy function blocks computer after an item is selected, and the computer is responsible for copy

  Original title: copy function

  The copy function blocks computer after an item is selected, and the computer is responsible for copy. It does not matter what size is the copy area. It usually requires a reboot hard to use the system.

  I tried to follow some of the instructions in a full Clipboard and unfortunately that is not the forms of the English spoken by them.

  Any help would be greatly appreciated.

  Denver

  d2n1cart@hotmail'com

  Hello

  We are pleased to know that the problem is solved. Let us know if face you any problem with Windows in the future.

• Windows Media Player opens when I type any key. This started 2 days ago and did the computer virtually unusable. The mouse is however immune to this phenomenon, so I can still use it. No idea how to solve this problem?

  Windows Media Player opens when I type any key. This started 2 days ago and did the computer virtually unusable. The mouse is however immune to this phenomenon, so I can still use it.

  No idea how to solve this problem?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Do a system restore. Choose at least 3 days ago when you did not have this problem as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• When Windows starts it is always a dialogue box that flashes on the screen and the CPU usage high (above 50%), after I connect sometimes for several minutes.

  Original title: at the start of Windows there is always a dialogue box that flashes on the screen, but I've known idea what it is.

  How can I determine which program is using this dialog box? I also don't expect high utilization of the processor (over 50%) after that I connect sometimes for several minutes. I see not all applications running in the Task Manager. The amount of CPU utilization in the services tab doesn't match what I see compared to what the gadget is read in my sidebar. Any ideas?

  Thanks in advance

  Hi Soan,

  1. What is exactly mentioned in the dialog box?

  2. when the problem started?

  3. did you of recent changes on the system?

  Method 1:

  Step 1:

  You can check if the problem occurs in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are not faced with the question in safe mode, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  You can read the following article and perform a full scan of security on your computer.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. You can take a backup of important data before performing analysis.

  Method 3:

  You can also read the following article and try to optimize the performance of Windows Vista.

  Optimize the performance of Microsoft Windows Vista

  Hope this information is useful.

• Since the update Firefox 6.0, some websites do not load correctly. I suspect it has to do with the Java being disabled because of the compatability modules. When I try to go to Tools/Add-ons, I get the message "Loading" for several minutes without chang

  Update Firefox 6.0 is useless to me because many websites I visit are not displayed properly, I guess because the Java modules are disabled because of incompatibility. They appear correctly in Internet Explorer.

  In addition, the add-on from Trend Micro is not compatible, which leaves me with a positive feeling.

  When I try to check to see if these modules can be updated, the menu item Tools/Addons just goes to a page with "loading" and stays there for several minutes without change until I close it.

  I would like to know the procedure to regularize this version of Firefox to my previous version that worked.

  Firefox 5.0/5.0.1/4.0/4.0.1 and earlier 3.6.20 all contain questions of security and stability that will not be corrected. You put your system at risk by using any version of Firefox that 6.0 or 3.6.20. Any person who displays a link to other versions is to be irresponsible, in my opinion.

  Java
  
  If the incompatible extensions in Add-ons > Extensions are Java Console, you have no need them unless your doing Java development. Most of the users have not yet installed, but Java will install Java Console with each update. You can delete them manually:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions

  The only thing that affects the functioning of the sites/Java applets on the web is the plugin (Add-ons - > Plugins) "Java (TM) Platform SE (version)". Do not forget that it is enabled and that you have not all extensions which affect/block "scripts".

  • Check commonly used plugins: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Update or install Java (aka, next generation Java plug-in for the Mozilla browsers): install or update Java in Firefox

  Trend Micro
  
  You must contact Trend Micro or go to the forums on their website to inquire about their plans to update the add-ons/toolbars they install in Firefox.

  Problem with the display of the Add-ons Manager
  
  The Add-ons Manager gets in a loop of loading due to the recent update of Firefox 6 and servers being overloaded because users and update process are looking for updates to the add-on. If you stay away from the "Get Add-ons" selection on the left of the screen of the add-on Manager, you should have no problem with that. This situation is expected to resolve when the overload of Firefox 6 update is complete. I do not always use this "Get Add-ons" option, instead, I go to the website of modules and the search for what I want from there: https://addons.mozilla.org/en-US/firefox/search/?q=clone & cat = all & x = 0 & y = 0

• at startup, the computer cannot display anything, just a mash of white and colors

  When the computer starts, there is no screen, just white, black and colors dance around the screen, by pressing F2 or F8 does nothing, nothing appears

  before the problem occurred that I restored system restore computer, because the computer has crashed with message "display driver nvlddmkm unresponsive", the restore was successful but then ten minutes later computer crashed and restart gave the above problem

  Thank you, Gary

  You have to become corrupted Graphics Driver or failing or graphic material.

  See you soon.

  Mick Murphy - Microsoft partner

• Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

  Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

  Hiya,

  I have recently installed Windows 8 Pro, installed all of my usual applications etc..
  The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
  "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
  Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
  I can't find a way to properly uninstall the graphics driver.

  At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

  Hi guys,.
  Looks like this isn't just me.
  Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
  Information system;
  Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
  CPU: AMD FX-8150 eight physical cores
  GPU: ASUS NVIDIA GeForce GTX 560 TI
  Main hard drive: OCZ Vertex 3 120 GB
  It may be useful
  Edit: Still not falling down, 11/02/12, 4 days
  
  
  New edition;
  
  
  If you still receive the error message, try the following steps;
  Has. try to perform a clean installation of the driver.
  Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
       
  
  You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
  B. close all other programs
  It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
  You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
  More information can be found below
  http://support.Microsoft.com/kb/2665946/en-us

• Does not display memory installed on the computer on Windows XP.

  Original title: RAM upgrade

  Hi again! I have another problem now. My computer is a netbook, EeePC1000, with 1.6 Ghz, 1 GB RAM and 160 GB hard. OS: Windows XP Home Edition. I tried the upgrade to you with a new memory KINGMAX-DDR2-PC5300-667 RAM. The problem is, my OS to recognize only 0.99 GB of the 2. What can I do? It's just a setting problem or other? Please help me! Thank you!

  Hello

  Your English is better than a lot of people I know and I'm English by English nationality!

  OK, from your description of the memory, it seems to be the correct sorting. I'm skeptical that a BIOS upgrade will help (I looked in the notes to upgrade the BIOS on the ASUS website), so let's check a few things before you consider as an option.

  First of all, what you do makes you think that Windows can see 1 GB? If this isn't it (or its equivalent)...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the computer: section

  .. .so please do the above and respond with the details.

  You say it's an EeePC1000 but is there something that comes after the 1000, for example H, HA, HD, HE or HG?

  Are you sure that the memory module you have purchased is actaully a module 2 GB instead of 1 GB module? Have you seen the actual label on the module (as opposed to its packaging)?

  When you start the PC, before Windows XP starts to load, you see anything by telling you how much memory is installed? It can not be displayed or may be displayed briefly, not blinking! If you do not see this indication can you enter the BIOS Setup and check from there? Unfortunately, the Asus site gives a manual with no information on the use of the BIOS. You need to look for a message from depression F key at boot time (usually F2 or Del but I saw others also). When you press this button, you should get in the pages of the BIOS settings. Look for the amount of memory installed. Exit BIOS without saving the changes, just in case you accidentally change a setting.

  Tricky

• After that the computer is idle for a few minutes, you receive an error message. "Vtdispl display driver does not work properly, please restart the computer to solve the problem."

  I rebooted and turned power off the computer several times and always get the same message. The size of the text on the screen and the icons are larger than the way in which they should appear. How can I solve this problem?

  Consult the manufacturer of your so great PC OEM, for example Dell / HP or laptop and install the latest drivers.
  If a visit generic PC your graphics card maker or manufacturer of the motherboard and install drivers lates
  Do NOT get the drivers of MSUpdate

• At startup, the computer beeps very - Compaq Presario s # 31316953

  I bought a Compaq Presario s3310 om (2600 + amd athlon with XP Home Edition.) S # 31316953)

  When I start the computer the computer beeps continiously and nothing happens after that. I did some research and would like to confirm that it is a RAM problem. The original Ram has 512 MB of ddr sdram memory. I did a search on the diagnosis Compaq Bios Beep codes and a beep very indicates error memory - reinstall or replace and re test. I'm on the right track?

  Nothing is lost by air, dust off the RAM slots.  Not sure you interpretation of the beep codes are correct.

  Beep codes: http://support.hp.com/us-en/document/bph07107

  What is more troublesome is buying a vintage 2003-04 machine that did not work. In addition, reinstall all the other cards.

  You can also try a system recovery not destructive http://support.hp.com/us-en/document/c00007689

• TreeView with icons displayed incorrectly after expansion (8 JavaFX)

  I have a TreeView with classes CellFactory and TreeCell custom, which has been implemented in JavaFX 2.2 and works perfectly. However, after I upgraded to 8 JavaFX. This tree is completely messed up. If I develop a nodes, there will be duplicate tree nodes in the tree. Here is a simplified version of the source code. If not use a method setGraphic() in class TreeCell, it works fine.

  package test;
  
  
  import javafx.application.Application;
  import javafx.scene.Scene;
  import javafx.scene.control.TreeCell;
  import javafx.scene.control.TreeItem;
  import javafx.scene.control.TreeView;
  import javafx.scene.image.Image;
  import javafx.scene.image.ImageView;
  import javafx.scene.layout.BorderPane;
  import javafx.stage.Stage;
  import javafx.util.Callback;
  
  
  public class TreeViewTest extends Application {
      private static final Image image = new Image(TreeViewTest.class.getResourceAsStream("icon_datasource.png"));
      
      public TreeViewTest() {
      }
  
  
      @Override
      public void start(Stage primaryStage) {
          BorderPane rootPane = new BorderPane();
  
  
          TreeItem<String> root = new TreeItem<String>("Root");
          
          for (int i = 0; i < 5; i++) {
              TreeItem<String> ds = new TreeItem<String>("Datasource " + i);
              
              for (int t = 0; t < 5; t++) {
          TreeItem<String> tb = new TreeItem<String>("Table " + t);
          ds.getChildren().add(tb);
              }
              
              root.getChildren().add(ds);
          }
          
          TreeView<String> tree = new TreeView<String>();
          tree.setCellFactory(new Callback<TreeView<String>, TreeCell<String>>() {
       
       public TreeCell<String> call(TreeView<String> param) {
    return new TreeCell<String>() {
       @Override
       protected void updateItem(String item, boolean empty) {
           super.updateItem(item, empty);
           
           if (!empty) {
               ImageView imageView = new ImageView(image);
               setText(item);
               setGraphic(imageView);
           }
       }
    };
       }
    });
          tree.setRoot(root);
          tree.setShowRoot(false);
          
          rootPane.setLeft(tree);
          
          Scene scene = new Scene(rootPane, 1024, 800);
  
  
          primaryStage.setTitle("Test");
          primaryStage.setScene(scene);
          primaryStage.show();
      }
      
      public static void main(String[] args) {
          launch(args);
      }
  }
  

  In general, cells are reused as items in TreeView (and some make, and ListViews) as soon as they become visible and invisible. It is perfectly possible for a cell to have an element that is not empty and then it change to empty, as the cell is reused for an empty cell.

  If you have a bug in your code: you need

  tree.setCellFactory(new Callback, TreeCell>() {
  
              public TreeCell call(TreeView param) {
                  return new TreeCell() {
                      @Override
                      protected void updateItem(String item, boolean empty) {
                          super.updateItem(item, empty);
  
                          if (!empty) {
                              ImageView imageView = new ImageView(image);
                              setText(item);
                              setGraphic(imageView);
                          } else {
                              setText(null);
                              setGraphic(null);
                          }
                      }
                  };
              }
          });
  

  You lucky in JavaFX2.2 that the re-use of cell does not seem to affect your bug. improving the effectiveness of the re-use of the cell in JavaFX 8 has exposed the problem.

  Furthermore, it is generally a bit pointless to re - create the nodes each time than updateItem (...) is called (frequently), rather than create them once when the cell is created (much less often). So consider

  tree.setCellFactory(new Callback, TreeCell>() {
  
              public TreeCell call(TreeView param) {
                  return new TreeCell() {
                      private ImageView imageView = new ImageView(image);
                      @Override
                      protected void updateItem(String item, boolean empty) {
                          super.updateItem(item, empty);
  
                          if (!empty) {
                              setText(item);
                              setGraphic(imageView);
                          } else {
                              setText(null);
                              setGraphic(null);
                          }
                      }
                  };
              }
          });
  

  Instead

• Our processor was reversed and now even if we have internet, other operations on the computer are unusable or very limited.

  Last night, our processor has been spilled and although he fell very hard, we have no audio data, we are unable to change the screen resolution, and we are unable to turn on our safety Center, among other things that bothers. We have access to the internet. I have checked the cables and connections but can't find nothing obvious. We need to operate the computer in safe mode. Any help would be most appreciated. Elen

  Hi Elen,

  1. what happens when you start in normal mode?

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  This can also occur if the cables and cards are not connected correctly. You can check if the cables and cards are connected correctly.

  Hope this information is useful.

• Automatically log off the internet when the computer is idle for a few moments

  Why my computer (Vista) automatically disconnect internet when it is idle for several minutesand after downloading a file. The message that appears after downloading a file is something the performance data.

  Hi magicre,.

  (1) what is you receive the exact error message?

  (2) since when are you facing this problem?

  (3) remember you to make changes to the computer before this problem?

  Step 1: Disable the security software and then test to see if the problem persists. Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.
  
  Step 2:run Internet Explorer in mode "no Add-ons" and then check if the problem persists

  To determine if the error is caused by an add-on, run Internet Explorer in "no Add-ons" mode To do this, follow these steps:

  1. click Startand type Internet Explorer in the box start the search .

  2. click on Internet Explorer (No Add-ons). Internet Explorer opens without Add-ons, toolbars, or plug-ins.

  3. test Internet Explorer to verify that it works correctly. If problems occur always,try step 2

  If no error occurs, the problem is caused by one of the Add-ons that typically load with Internet Explorer. In this case, follow the steps mentioned in the link to determine which add-on is causing the problem

  Optimize internet Explorer
  http://support.Microsoft.com/kb/936213

  (See method 3-2 in the link)

  If the problem persists,

  Step 3: Start the computer in safe mode with network and test it. To do this, follow the steps below:

  Access the menu options advanced start by turning on your computer by pressing key F8 beforeWindows begins. Advanced startup options menu select SafeMode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Let me know if the problem persists in this mode

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Palm TX connects to the computer via WiFi for Hotsync

  I tried the network Hotsync on all my computers, XP, Vista 32 and Vista 64 (which started the whole attempt) and the device fails to connect to the computer, even if I set the IP address.

  My wireless network see the Palm and I am able to access the Internet through it, but it does not connect to my computer. Any suggestions?

  Here is my Wifi Hotsync help file:

  WiFi HotSync with a TX

  1. on your PC, locate the Manager HotSync (small HotSync icon in the lower tray of the right tool on a Winbox). Click top and check 'Network', then click again and select Setup.

  2. choose the network at the top tab in the window that opens and locate your HotSync name in the list. Make sure it is checked.

  3. press the button of TCP/IP and look for the IP listed for "main PC address. Write it down.

  4. turn on the Wifi on your Palm and you connect to your router.

  5. on your Palm, select the HotSync program and press the word "Network" over the HotSync icon in the middle of the screen. Below, enter the IP address that you noted in step 3. (Include periods!).

  6. tap the HotSync icon big above the IP address and hang in there!

  7. If you stand and nothing happens try a HotSync cable, then retry the HotSync Wifi. Sometimes, information is to be transferred from your PC once you check the network option. Also, don't forget to watch for any activity of firewall ask you questions about "HotSync.exe tries to access your hard drive" etc. You may need to define a rule to allow him to.

  On your TX, check these settings in the drop in Hotsync:

  Modem Sync: network

  LanSync: LANSync

  Network configuration: (Wifi should be listed as one of the networks)

  WyreNut

  Message edited by WyreNut on 02/11/2008 10:59