Icons not showing after that newly written extension is compressed to xpi
I am a beginner who is learning the overlay extensions. I lived a good part of the tutorial. Then, I built a base extension with a toolbar button custom shell by following the steps described in https://developer.mozilla.org/en-US/docs/Mozilla/Tech/XUL/Toolbars/Custom_toolbar_button. As part of the exercise, I downloaded the recommended two icons (for add-on Manager and the toolbar) and did not change their. I add the code to the java file. I copied the file of extension (unzipped) in the folder extensions in my profile, as indicated and restart the browser. An install dialog box was launched, and when I told him okay, perfectly installed extension. The icons appeared in the Add-ons Manager, and I was able to drag the icon of the button to the toolbar. The button works fine, launches the java.
Then, following the instructions on another page tutorial, I used 7 - zip to archive all items in the folder root extension, in Zip format and gave the file extension xpi. I uninstalled the original extension in the extensions folder, then bounced the browser. Then, Manager of Add-ons, I called 'install module file' and select the new xpi file. Installation went through the usual confirmations, and the extension has now been reinstalled. Only one problem - the two icons are empty. Both in the modules and Manager on the toolbar button. I can click the phantom button in the toolbar and it still launches the java, but no png images arise, including in the Customize dialog box.
I tried to manually reinstall the extension, and the icons will appear. But a subsequent xpi installation leaves them empty. I tried to re - create the xpi file using the zip program from Windows instead of 7-zip, but still had the white icons.
In searching the Web, I found an instance of another user having lost images of the icons only after spending like a Flash of extension, is not just me. But the replies to this post did not seem useful.
Any ideas?
It took whole unzip to true in the installation of rdf, so that all the icons would get unzipped and be available for use.
Tags: Firefox
Similar Questions
-
Slide show not repeated after that some buttons are used?
Hello
I have this slideshow that I am so close after completing, but there is a problem I'm having with it not repeated after that some buttons are used. I tried to understand what could be the cause, but I can't see what it could be. According to me, that I'm so very close to having this if it wasn't for that matter.
Slide show buttons '1' and '2' work perfectly, however '3' to '6' buttons do not work completely as it should. During the presentation, as he plays through the slides, if you click on the button "1" or "2", you are taken to the corresponding slide and the slide show resumes automatically, which is correct. However, if you click on one of the buttons "3" to "6" you are always taken to the corresponding slide, the slide show does not resume and remains on this particular slide. I looked at the code for the Action Script 3 several times and I don't see what could be causing this but I'm not too experienced so that there could be an error, no matter how minor, that I'm missing.
I have attached the file and if anyone has any advice at all or can somehow help I would REALLY appreciate it!
Thank you
William
Is your link to the object or picture. I ran into this many times, I accidentally select the frame and not the object in the slideshow for the link.
Although he thinks through the problem only comes when you go directly to the frame and not when you play through. Maybe action that activates the link lights when the object is revealed onstage on a previous frame. When you jump on the structure with the object already play in the advances head beyond the line of code providing the link and instructions is therefore missing.
If the code with the link is on frame 10 and the function to move to the slide rests on frame 15, the film would not only go 10 frame, but also actionscript code that frame so lack the instructions to be a link. Don't forget that this programming happens on a timeline, if the read head misses the keyframe with the instructions, that he will not return to them to find it for you. Try to make a keyframe a picture before ordering GOTO AND STOP and put another link it so when the playhead crosses the new keyframe the link code is read correctly.
That's what I'd do to test the theory,
Good luck
Brett
-
roboformtaskbaricon process does not close after that firefox 9 is closed
Hello
roboformtaskbaricon.exe (v754) process does not close after that firefox 901 is closed. Even if I'm wrong, my guess is that firefox pushes this process of firefox, forcing him to run on its own. If it's a matter of roboform, then I will contact them.
Thank you, specialist
On the next page, scroll down to "RoboForm controls", then scroll down to 4. The taskbar icon under this heading. It seems that maybe the item to which you are referring. Taskbariconroboform .exefile name, it involves the Windows taskbar rather than the Firefox tool bar.
Clarification on roboformtaskbaricon.exe, its function and that it should close when you exit Firefox, Roboform online technical support contact and leave all the details of your question:
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?
I think you're looking in the root folder not your home folder. Tilde ~ in front of the first slash indicates the folder.
Try this...
Quit Safari.
Open a Finder window. In the Finder menu bar, click go > go to folder
Type or copy paste the following text:
~/Library/preferences/com. Apple.Safari.plist
Click OK, and then move the com.apple.Safari.plist file to the trash.
Restart Safari to test.
-
My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.
What can I do?Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
-
Portable keyboard on Vista you will sign in with my password, but will not type after that
* Original title: keyboard on my laptop computer vista will allow me to connect with my password, but will not type after that. I use a screen keyboard and mouse to this type. I even restored to factory settings. Always won
My keyboard on my computer vista laptop will only sign in with my password, but will not type after that. I use a screen keyboard and mouse to this type. I even restored to factory settings. Still will not work. Checked ease of access settings and language settings, running of ideas. I tried another keyboard, failed to mention. Re-installed drivers as well. Any help would be great.
Thanks for your reply. I tidied up my lap top for about 5 months and just used my office for awhile. One day I was in the mood to tinker around with my lap top, then when I turned it back B I N G O! My main advice worked again. Matter of fact, I use it now. Thank you for your effort in the e-mail back me on this issue. good karma can follow you anyway yoy travels take you.
-
Keyboard does not. Able to use for the connection does not work after that.
The keyboard works to connect. But does not work after that.
Hello Sml15,
The embedded screen keyboard should still work even if the physical keyboard isn't.
Try this first...
Press and hold the Windows key and the space bar.
If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.
In the window of the ease of access to the keyboard, disable FilterKeys.
If all goes well, which will fix the problem.
Let me know how it turns out.
-
Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages
the printer is not the shades of grey even print cartridge is not yet empty
y at - it software for hauler color printing?
Thanks for your comments
Hello Nilsvolkel,
Thanks for the reply.
I'm sorry for the late reply.
I appreciate your patience and time.
Do not require any special software.
However, you can use the steps in the following articles and check.
Reference:
http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=fi-fi&kbid=328037&data=FCFfEfoyEiGLYDIUqzWyE0QE3127X87y&CL=1http://Windows.Microsoft.com/en-us/Windows/choosing-print-options#1TC=Windows-7
Please keep us informed.
Thank you
-
Why DW does not close after that I downloaded to my site and push the closebutton?
Why DW does not close after that I downloaded to my site and push the closebutton?
Hello sorent26443032,
This kind of problem occurs usually when there are 2 cases of software are running.
If you are on a windows machine Please make sure that there is that no duplicate instance is running in the the Task Manager for Dreamweaver.
If you are MAC please check the same in the activity monitor.
Concerning
Vivek
-
only the background shows after that computer "awakens"...
Almost every time my computer goes to sleep for inactivity and 'wakes up' once again, only the background image is visible. This doesn't mean no icons, start button, taskbar no, nonthing (there is however a slider that I can move, but I can't do anything with it). I have to restart the computer again after that, but sometimes if I let it go to sleep yet maybe once or twice (three, four...) she still wakes up with the normal icons and usability.
Anyone know what this may be? It is extremely annoying, and if not, everything seems to work well.
It is a gateway SX Series computer that I bought new with windows 7 at best buy for Christmas. This has happened right out of the box and did not stop. :(
Hello
Since this is a new computer, you should check with the help of the gateway and have it repaired as
you make more they tell you it is something that you did. Also check with BestBuy however their leeks
and the pics are rarely really geeks.-----------------------------------------------
If you want to troubleshoot it here is how:
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------
Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
similar are not enabled.Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)All the default power plans and then set them as you wish.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
BlackBerry smartphone email alert icon not showing on Email folder?
I chose the option to separate my SMS / email messages. I understand that copies of ALL my messages go to my folder 'messages' standard, but the red alert icon shows only on my 'messages' folder when I receive a new e-mail message. It does not appear on my e-mail folder. On my 8830, I could hide my 'messages' folder and manage all my messages SMS & Email to their respective folders, and whenever I got a new email, the small red alert icon would show up through my e-mail folder. I talked to others on tour in other forums who say that their to work properly. Their red alert icon will appear next to their EMAIL folder when you receive a new email. But mine is displayed by my standard 'MESSAGES' folder, so I have to keep the 2 folders side-by-side on my home page, which is very annoying. E-mail messages still land in my EMAIL account correctly and I can work on this issue, but I don't know where the message was if I didn't keep the handy 'MESSAGES' folder because the alert icon will appear next to that one instead. Thanks for any help or direction.
You are welcome.
I think that is how it is planned... on the main messages folder.
-
I did a restore (Windows XP). After that Firefox would not start. You can see the "Hourglass" for a second, but nothing happens. I tried the Mode SAFE Start and it wouldn't work. I went into the program file and tried to open with the .exe of the fie. Nothing, I don't don't want to lose my favorites by installing a new version. I have tried creating a new profile becauae I don't know if I can do it right or even if it would work.
Would appreciate any help. Thank you. Bearcat78
Hello Bearcat78.
I advise that you think... a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. But it's not too difficult.
Note: You can print these steps or consult them in another browser.
First, save your profile by saving a copy of the profile file... See: profiles of boards - where Firefox stores your bookmarks, passwords and other user data.
- Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
- Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
- Remove the Firefox installation folder, which is located in one of these locations, by default:
- Windows:
- C:\Program Files\Mozilla Firefox
- C:\Program Files (x 86) \Mozilla Firefox
- Mac: Delete Firefox in the Applications folder.
- Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
- Windows:
- Now, go ahead and reinstall Firefox:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
Please report back to see if this helped you!
-
Windows says not genuine after that laptop warranty repair return
I sent my laptop to a power supply repair after it failed. He is now back and looks very good, but it says that windows is not genuine, even after that I run the audit online tool. Any thoughts? Back to toshiba (again)?
You have recovery discs?
Original installation Toshiba recovery using these discs and laptop image will be valid and active operating system. -
Multimeter simulation Multisim not showing after reading press simulation
I'm running student multisim version 14. I made a very simple circuit and to place two multimeter and run a scan dc.
But the problem I am experiencing that I'm window calculation but multimeters not show any value of simulation.
can someone help me understand this please.
Hi shabeesatsangi,
The meter components are intended to be used during the interactive simulation. When you run the DC OI analysis, you will see the results in a table in the grapher.
To display the values in your multimeters, change your simulation mode to Interactive and run the simulation.
I hope this helps,
Jeff
National Instruments
-
IdeaPad Y530: windows does not start after that laptop went to sleep mode.
Hello
More great frustration in my life have laptop brand new, this for me.
After that the laptop goes into mode 'sleep', I'm not able to go back to Windows. All light are there and watch as usual, but there is no Lenovo Welcome logo or any other sign of normal behavior. I can turn it off by holding the button market / stop, but when I turn back the problem is still there. Windows does not start.
I was able to go back to Windows that day after leaving just laptop without any power and battery.
I called Lenovo and they suggested to disable the standby modes use put into hibernation. I did it. When the screen saver started, something went wrong, computer got froze and I had to restart, but then again, black screen and no reaction.
Anyone have any ideas?
Thanks for the reply.
That's what I end up doing. OnKeyrecover does not work either so what spoke on the phone with Lenovo. Then he is gone now for repair.
Maybe you are looking for
-
Satellite L750 Fn buttons not work & close does not work either
I used my L750 for about 3 weeks now and all of a sudden the function keys (using the FN + F keys) have stopped working. In addition, the stop, when I go to start, then press stop, my laptop used to actually stop. Now all that I can click is either s
-
Introduction The ThinkPad T450s is one of the best new ultrabooks. If it is not as slim as some, it is still quite compact and easier to service than the thinner machines and screen Full HD IPS is a standout feature. This review is based on a ThinkPa
-
I have not installed xp mysrelf.
-
I have a small problem, sometimes after playing games on my computer, the screen resolution must be changed so that the game will play correctly. But after shutting down my computer and turning back on (usually with a space for a day or so between th
-
Cannot download Windows 10 guard runs the quick check
My computer with Windows 7 doesn't get past "quick check" screen. Should take 10 seconds, let run for 30 minutes.