ICS: Internet connection sharing ERROR while allowing IP.

Similar Questions

• ICS - Internet connection sharing does not

  I build two computers with Win7 Ultimate and need to share a modem on a wired network connection. I have got the file sharing to work between the two machines and followed all the instructions concerning the ICS, but still not get the no host machine to connect to the Internet. I chose the option on the host computer to allow machines on the network to control the connection, and of course, when I plug the cord of connection linking the two, the host dials upward. However no program on the computer no host can actually communicate.

  You are in the right place.  The host of cable connecting network address IPv4 is not what it should be, which indicates that ICS is not configured correctly.

  While remaining in 'Control network and Internet\Network connections', right click on the connection dial-up, and then click Properties > sharing .  If Internet connection sharing is checked, uncheck it and click OK.  Then go back and put a check mark in this box to re-enable Internet connection sharing.  If a box appears asking you to select a private network connection, select the connection of cable system in the menu.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• Is it possible to manage the ICS (Internet Connection Sharing) in the c# code or registry in Windows 7?

  Hello

  I'm developing simple hosted Network Service.

  As we know, hosted network must ICS but I don't know how to handle it in the c# code, or by registry.

  In windows XP, there is a register for the use of ICS on this path.

  -HKLM\System\CurrentControlSet\Services\ICSharing\Settings\General

  However, I see no record of use ICS in windows 7 or 8.

  Issue.

  I wonder there is no way to manage the ICS in the c# code or registry in Windows 7 or 8?

  Thanks for your help!

  Hello

  You can ask your question in this link:

  http://social.msdn.Microsoft.com/forums/en-us/csharpgeneral/threads

• Cannot access internet when you configure with internet connection sharing.

  INTERNET HELP?

  I tried to use the internet connection to my wireless on my PC laptop not wireless using an Ethernet cable. I have connected my pc not wireless to my laptop wireless pc with ethernet cable, I did everything as requested on the site of "Dummies" and the PC says its connected but when I try to go on Internet Explorer, it does not work? HELP! : (PS) my PC is Windows Vista and my laptop Windows 7

  Hello

  1. While sharing was the Internet works fine before?
  2 did you change on your computers before this problem?

  I suggest you follow these methods and check.

  Method 1: You can follow the Windows Help article below and check that ICS is set up correctly.
  Set up a shared Internet connection using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing
  If ICS is not configured correctly, then you must post back the result by running the following command
  To do this:
  a. click the Start button.
  b. type cmd in the search box.
  (c) in the command prompt, you must type ' ipconfig/all' and check the result.

  Take a screenshot of the command prompt and post.
  To take a screenshot, you can follow this link below.
  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Method 2:  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  I hope this helps.

  Thank you.

• Can someone help me with my problem on the Internet connection sharing?

  I have a LAN wired connection but no wifi capability. I managed to share the internet connection from my pc to my phone by using the "Internet sharing connection" using the usb cable and the first day, it works fine and I can use my phone for internet access. Unfortunately, the 2nd day I can't connect and it says "internet is not available.

  I am currently using windows 7. I hope some of you can help me thanks.

  

  It is on my pc and it says now no internet access. I enabled the "allow other users of the network to connect to this computer" as what I said the first day, it works very well.

  Hello Fritz,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted network drivers or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Use the steps described in this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  Additional information:
  Using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows/using-Internet-connection-sharing#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Internet Connection Sharing via Intel my Wifi

  Hi, I use Alienware m14x with windows 7 Home premium 64-bit
  I have just restored my laptop factory. Configure my wifi profile. When I click on share my internet it gives the error that has first of all connect to the internet. I am already connected to the internet, therefore a ground of firewall problem please help with a few problems of settings.
  Thank you.

  Hello SiddheshGajare,

  Which Wi - Fi utility you are trying to share the connection to help?
  It is perhaps that the connection is not able to share with other devices.
  You can look into trying sharing instead of use the Windows internet connection Wi - Fi connection utility:
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing
  The instructions also apply to Windows 7.

• Internet connection sharing cannot be enabled.

  Greetings. I noticed a lot of posts about a similar situation, but I don't seem to find the answer that works for me. The skinny: using Windows 7. I connected to XBox live through ICS with my laptop. Hotel has wireless and I connected to it. Then, I followed the instructions and my wireless for sharing of the value. From there on, I wired XBox laptop w/ethernet cable and XBox settings manually configured as IP address, subnet, gateway, & DNS address mask. It was working fine the first day. During the next two days, connection was super slow... but it still worked. The problem does not seem to come from the hotel's Wi - Fi connection. It was the laptop for XBox it seemed. So I did some reading more and got more stupid than usual. I tried to 'Bridge' of the LAN and wireless connections to see if I could get better results. I'm not too good sense of course so I didn't know if it would work. There can be no. This is why I removed the two bridge connections and even removed the icon of "Bridge". I tried to go back to the original configuration that has worked and that's when I started getting the "connection sharing Internet can not be activated. A LAN connection is already configured with the IP address that is required for automatic IP addressing"message. So now, when I check the share my wireless, I have that message and it won't share. I'm lost! I tried "ipconfig \all. I tried "netsh winsock reset." Nothing seems to work. I don't know if I'm doing something of out of order which does not allow local network setting. I mean... what must be plugged in the ethernet cable, or even not at all, and when it is, that the parameters of the Xbox is? I even put the XBox failing to see network settings if I could start to this end. If it was not obvious, I'm still able to access the internet wireless and wired. This is something crazy and so far, none of my smart friends have been able to help! Thanks in advance for any of yours. As I said, I'm really not good with this stuff so if you have answers, please show idiot as I am a fool proof. See you soon!  Jim C

  Hello

  You can follow the Windows Help article below and check that ICS is set up correctly.

  Set up a shared Internet connection using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  If ICS is not configured correctly, then you must post back the result by running the following command.

  To do this:

  a. click the Start button.
  b. type cmd in the search box.
  (c) in the command prompt, you must type ' ipconfig/all ' and check the result.

  Take a screenshot of the command prompt and post.

  To take a screenshot, you can follow this link below.

  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Vista internet connection sharing configuration

  Please take note that I have already visited the URL for windows: http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing

  I did the following:

  • Configured Internet connection service.  Service is set to automatic, running, recovery failures all the value zero seconds
  • Connection to the LAN is configured as 'shared '.

  BlackBerry Curve 8330 is connected the USB cable live and is considered 'removable disk' records can be seen

  The Blackberry a browser opera mini version 4.2 installed but cannot connect to the internet.  I ask for advice on how much of the configuration is proveable and how much more needs to be configured to connect to the internet. Concrete measures to solve the problem so that I can work on what remains to do research

  Hello

  I suggest you to send your application in Blackberry forum for better support.
  http://supportforums.BlackBerry.com/T5/General-support-forums/CT-p/GeneralSupportForums

• By using internet connection sharing

  I'm having a problem using ICS.  It used to work perfectly, but then I had to reinstall vista and use my restore disks, and it has not worked since.  That's what I'm trying to do.  I'm taking a wireless internet signal coming from my router and it sends through my LAN port for the computer of my son, who does not have a receiver wireless on his computer.  This used to work properly, but don't work no more... That's what I've done so far:

  I turned on ICS on my wireless connection.  I checked all the services I want to be able to have the connection (http, ftp, telnet, etc.).  I turned "detect settings ip automatically' on my son's computer.  I have a crossover cable from my computer to my son (that's what I used before too).  I don't know what happens wrong... someone has any ideas?  Please help :)

  Hello

  Make sure that you are really using a crossover cable and that the side network is up
  and running.

  First step - Ad - Hoc network

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How Set Up Ad-Hoc wireless network in Windows Vista (if you ever want to WiFi)
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista (if you ever want to WiFi)
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  Two step

  ICS Setup

  Using ICS (Internet Connection Sharing)
  http://windowshelp.Microsoft.com/Windows/en-us/help/bfd3bd31-82F0-4B9C-9cde-fb92bc2b14771033.mspx

  ICS step by step
  http://www.windowsreference.com/Windows-Vista/step-by-step-Internet-Connection-Sharing-ICS-Setup-in-Vista/
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Internet connection sharing: "Bluetooth network connection" does not appear in the list "Home Networking connection."

  Hello.

  With Windows 7, I want to share the network connection Wi - Fi with Bluetooth through PAN (Personal Area Network).

  When there are several connections in addition to Bluetooth after opening "Share" tab, I see these connections in the "Home Networking connection" list, but there is no Bluetooth. Then, when there is no connection in addition to Bluetooth which I can share with, there is no tab "share."

  Equipment: laptop Samsung NB30:

  • Broadcom BCM2070 Bluetooth 3.0 + HS USB Device with the driver PAN ('Bluetooth device (Personal Area Network)") provided by Samsung: Microsoft, version 6.1.7600.16385, 21.06.2006

  As I assume there should be means to somehow add "Bluetooth Network Connection" to a list of connections that can be internet shared with.

  Also, when I tried to fix this problem manually, other questions are raised:

  • There is really no Thoubleshooting guide for Internet connection sharing in Windows 7? I see this document on the site "Microsoft Support" for Windows 98SE, Windows XP - but not Vista and 7.
  • When I'm stuck to the administration of the system to the GUI, there is good decision to guarantee a target with the CLI. After searching a command line installation Internet connection sharing, I see no guides for this - only something likehttp://forums.devshed.com/windows-help-34/enabling-ics-under-command-line-89499.html . Is there really no way to set up ICS by command line and I'm forced to use complex GUIs?

  So, please help me solve problem BT PAN ICS. But if you reply to other questions, it will also be interesting to read.

  Hi LeoniusLeonius,

  Here are a few articles using Windows Internet connection sharing (ICS) you can do refers to.

  Using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Set up a shared Internet connection using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

  Sharing an Internet connection between multiple computers

  http://Windows.Microsoft.com/en-us/Windows7/sharing-one-Internet-connection-among-several-computers

  Change which computer on your network connects to the Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-which-computer-on-your-network-connects-to-the-Internet

  See if one of the articles will help you in fixing the issue.

  Any sharing via command line for internet connection, unfortunately there is no command available to do.

  Hope that answers your query.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my internet connection sharing went :((

  my internet connection sharing went: (when I make connection ad - hoc tab "turn on internet sharing" still there... but this time I started to do a special tab disappeared...:(je dois redémarrer mon pc et tourner sur internet en partageant (cocher) on my modem to broadband, but on my ad-hoc don't always 'no Internet'... I need your help :(())

  Hello

  Don't forget to put power - off wait a few minutes - then power and then turn on the modem
  router and other computer that you share the connection.

  ----------------------------------------------------------------------

  Try the system restore before that happened:

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ----------------------------------------------------------------------

  The routers are much easier and they don't cost much. You may need to reset upward
  the ICS.

  ICS Setup

  Using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  ICS step by step
  http://www.windowsreference.com/Windows-Vista/step-by-step-Internet-Connection-Sharing-ICS-Setup-in-Vista/
  See this thread
  http://windows7forums.com/Windows-7-networking/1037-ad-hoc-Internet-connection-sharing.html

  Windows 7 Internet connection sharing
  http://www.wlanbook.com/Windows-7-Internet-connection-sharing/

  Share Internet access on Windows 7 - video
  http://www.YouTube.com/watch?v=sBAS-a1smFo

  Set up a shared Internet connection using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet
  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

  Networking in the first answer sites also have ICS help.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Set up a wireless network without router
  http://www.Microsoft.com/windowsxp/using/networking/setup/adhoc.mspx

  ---
  I hope this helps.

• an error occurred while internet connection sharing was turned on (null)

  An error occurred while internet connection sharing was turned on (null)

  I DID ALL THE ALTERNATIVES IN THE INTERNET. QUESTION HAS NOT BEEN RESOLVED. Same mistake just trying to enable ICS.

  Hello Michelle,.

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience and time.

  As the computer is connected to a domain, the question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Thank you

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP