ID:2481 of the event, the UPS Service is not configured correctly.

Similar Questions

• Error event ID 2481 UPS service is not configured correctly

  error I have event ID 2481 UPS service is not configured correctly.  There is no ups device, and it has never been?  XP Pro W / SP3. Thank you

  Hello steveholstrom,

  This means that the UPS service is configured to start automatically or it is set to manual and something else starts it.

  Take a look at the Thread following responded by JoseIbarra:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/event-id2481-the-UPS-service-is-not-configured/13a84130-E662-4936-8077-7a5f4b476d78

  Let us know what you think.

  Best regards

  Matthew_Ha

• The Management Agent is not configured correctly. How should I do?

  Hello

  We have a number of constraints to exploit our SGD server:

  1. SGC is not connected to the internet.
  2. We do not have a user of the host, or a tunnel ssh configured.

  I sent an agent manually using agentDeploy.sh, but I encountered a problem with the stage of the officer course (I had the wrong password).

  The deployment of the agent stopped there. So, I went to ensure the agent manually.

  
  However, I see that I have no plugins installed. I continued as another deployment, , but it's where I reached my limit::

  ./emcli deploy_plugin_on_agent -agent_names="pdbhost01.company.net:3872" -plugin="oracle.sysman.db"
  Prerequisites check failed
  For agent : https://pdbhost01.company.net:3872/emd/main/
          The Management Agent is not configured properly. The required host target is not found.
  

  I was wondering if it was possible to:

  1. Continue the configuration of the agent: what would the step set up the target host?
  2. Re-install the agent: what should I do to uninstall it, since I can't do OEM?

  Thank you.

  You are right. SGD is installed correctly.
  We have installed a RAC recently and I'm working on obtaining controlled put up for her.

  It took me some time to find the document to help me with this particular problem. It comes to keywords!

  That's what helped me to goback on track:

  EM 12: Plugin on the deployment Agent of reports 'Agent is incorrectly configured. Requested property not found. "(Doc ID 1541823.1)

  I can a little more that necessary, since these steps, I deleted then deleted repository of the WHO agent_inst agent and ran emcli with the Configonly option. As follows:

  $/sysman/install/agentDeploy.sh AGENT_BASE_DIR = OMS_HOST = EM_UPLOAD_PORT = AGENT_REGISTRATION_PASSWORD 14511 example.com = 2bornot2b - configOnly

  Thank you for your response and time ODatabse_Guy.

• Receive error message "the UPS service is not confiqured correctlly" when check the errorlog advanced system information

  Original title: advanced information system

  I Wiindows XP Home Edition and on the Sytem Advanced Info - the error log indicates under Source UPS under service Description the inverter is not confiqured properly. How can I fix this please, it drives me crazy

  Hello

  Search for contact information for HP. Let us know if face you any problems with Windows in the future.

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html

  Hope this information helps.

• Cannot start the unit because the authorization service is not running - cannot start service

  I'm weirded out. When I try to start the unit on my VM, I get the following message:

  The Virtual Machine cannot be set to Unity mode because:
  -The VMWare authorization Service is not running.

  So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):

  Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.

  Event Viewer is a little more detailed... But not really useful:

  Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)

  NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.

  Technical details:

  Host: Windows XP SP3 (French)

  Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.

  VMWare: 7.0.0 build-203739

  Client: Windows XP SP3 (English)

  I have attached my log of vmware just in case. Will be extremely grateful for any help!

  Thank you!

  The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  and repeat once more for authd thereafter;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.

  Joakim

  BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.

• Satellite L355 - the PNRP service does not start

  My Satellite L355 can't join a homegroup on my home wireless network, because the PNRP service will not start. The service depends on, Peer Networking Identity Manager, PNID, starts. File missing or corupt?

  Any ideas how to fix?

  Thank you, Jack

  Hi jtorbert,

  Friend of me has had the same problem and it could solve the problem by deleting this file:
  "C:\Windows\ServiceProfiles\LocalService\AppData\R oaming\PeerNetworking\idstore.sst".

  This file has something to do with the PNRP service and after deletion it will be re-created. Generally, this service should work correctly after deleting this file.

  Check this box!

• HP Pavilion Notebook PC g7 - The Audio Service is not running

  I don't have sound on my PC for a few weeks, but when I use a headset it is solid. Today, I saw a message saying that the Audio Service is not running. What is going on?

  HP Pavilion Notebook PC g7

  #ABA product number A6Z29UA

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  Once this done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• The specified service does not exist as an installed service. (Error code: 0 x 80070424)

  I tried to turn on my Windows Firewall because they all stopped working for some reason any

  & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

  The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

  I tried to turn on my Windows Firewall because they all stopped working for some reason any

  & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

  The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

  The name of your what appears?

  Error 0 x 80070424   See: http://support.microsoft.com/kb/968002

• No sound. Error "The Audio Service is not running"

  The sound stopped working on my Dell XPS M1210. I get the message "The Audio Service is not running" and the resolution of problems can't fix. Any suggestions?

  Hello

  See if that helps you.

  Do to Dell drivers and download page > equip your Dell model number > follow the prompts to find the drivers for your operating system > Search Audio drivers > download and install.

  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  See you soon.

• Error failed with error 0 x 80070424: the specified service does not exist as an installed service.

  I have DSL and a wireless printer that work well when the system starts; EXCEPT the desktop icons disappeared so I can't manage them! If I stop DSL through the system icons, I get the following error messages when I try to restart or to solve problems: do you know what are the services that I need to install/reboot?

  Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection.

  Diagnosis of last run time: 16/05/12 16:09:47

  Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn	HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
  warn	HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
  warn	FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
  warn	HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
  warn	HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
  warn	FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
  error	Could not make an HTTP connection.
  error	Could not make an HTTPS connection.
  error	Could not make an FTP connection.

  Thanks for your attempt to solve my problem.

  Curiously he solved my problem of network while solving what has proved to be a problem with the firewall of Windows (see below): who knew?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Security/Windows-XP-Security-Service-Center-error-1060-and/1476c2b6-8161-4ccd-a69f-93292b5152da

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)

• error 1075 the dependency service does not exist or has been marked for removing windows xp

  The DHCP Client has stopped, but it is configured to start automatically.  When I try to reboot, I get the following message: error 1075 the dependency service does not exist or has been marked for deletion.  I need help to solve this problem.  Because of this problem, I can not connect to the internet.  My connection continues to try to acquire a network address and I lost my IP address.  I need help to fix this error on my Windows XP machine.  Thank you!

  See if this article solves your problem:

  "Error message when you start the DHCP Client service on a Windows XP-based computer:"error 1075.
    <>http://support.Microsoft.com/kb/915162 >

  HTH,
  JW

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• The specified service does not exist as an installed service

  Recently I seem to have problem with every thing in my laptop under windows vistas. When I try to open any program such as device 1 Manager) 2) install/uninstall any program 3) manage computer 4) remove a printer, etc., it gives only the error "the specified service does not exist as an installed service. I am unable to set something good with my computer. the system tray has the error "The Audio Service is not running". The windows update is on and its updates up to today date from the. I can't even install the 'Active X' in IE8.
  Even when I open MS office like word or execl program opens a file, but it takes 5 minutes to get active average as it opens, it gets busy. We can open other programs, but not MS office program.

  Good advice to set this right. Thank you and best regards.

  Hi Dilippatel,

  A. when it last work very well?
  B. recent changes made on your computer?
  C. who is the manufacturer of your computer?

  Try the following steps.

  Step 1 : clean boot

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.  To perform the clean boot procedure, follow the instructions in the link below.

  1: perform a clean boot
  2: enable half the services
  3: determine whether the problem returns
  4: enable half of the startup items
  5: determine whether the problem returns
  6: solve the problem
  7: reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode. Uninstall or update the program that is causing the problem.

  Step 2:

  1. click on start.

  2. type regedit in the search box start and press to enter.

  3. navigate to the location:
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BBBFC1-08002BE10318}

  4 remove the LowerFilters value in the right panel. (NOTE: under the key, it)
  are also some sub keys for example 0000, 0001. Please, double click it and remove the
  LowerFilters value.)

  5 restart the computer and check if the problem persists.

  Important this article contains information about how to edit the registry. Make sure that you back up the registry before you edit it. Make sure you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  Try these steps and let us know the result.

  Please post you rquestion in the discussion group of the Office for issues related to Microsoft Office.
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]