IDE #1 error when changing from my dvd on the Satellite 2450-401

Hello
I just bought a Toshiba sd-r6472 dvd - rw to replace my old Teac on my Satellite 2450-401 dvd\cdrw. When I restart my computer, I get the error ide #1 and after loading the system (Windows and Linux) my new DVD - RW disc is not seen. I tried to install it under widows with the computer running is the same I don't see, but to the list I can open it (in there now). I updated my BIOS nothing. This DVD - RW works very well on a laptop of another producer. I tried to install another DVD - RW drive, it's the same thing. I have read a few forums and apparently the Toshibas have a few problems, readers are CSEL and put it into a slave (the player is all pine is plug and play) you must connect to pins or something like that. Can someone help me? It's stupid that a Toshiba drive does not work on a Toshiba laptop and works on another... If there is a simpler method to install it will help me much

Hi Michael

Before starting any discussion about your problem please use advanced search on this forum option and put the IDE #1 as search terms. You'll see on this forum, you will find a lot of similar topics. Check a little. You may find the answer. If this isn't the case, write again please.

Good luck!

Tags: Toshiba

Similar Questions

  • Screen fade slowly when changing from one page to the other

    Original title: melted screen

    Why my not to screen a slow fade when changing from one page to another.  Did not until recently.

    Hello

    1. what operating system is installed on your computer?

    2 are. what page you referring?

    3. when exactly are you facing this problem?

    4. have you made changes on the computer before this problem?

    If you use the Windows 7 operating system, you can follow the methods.

    Method 1:

    You can see the issue in the clean boot state. Read the following article.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

    Method 2:

    I suggest you run the calibration of the colors of the display on the computer and check if it works.

    Calibrate your screen

    http://Windows.Microsoft.com/en-us/Windows7/calibrate-your-display

    Method 3:

    You can run the troubleshooter of display quality and check.

    Open the troubleshooter of display quality

    http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

    Method 4:

    You can try to update the display adapter driver by visiting the manufacturer's Web site to download and install the latest driver package.

    For more information: update a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Update drivers: recommended links
    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    It will be useful.

  • My 6 Lightroom freeze when changing from tab to tab library developing countries

    My 6 Lightroom freeze when changing from tab to tab library developing countries

    Hello

    Please follow the Solution below

    1. Go to edit > preference > Performance > uncheck "processor chart use" If this does not solves the problem then,
    2. With Lightroom closed
    • Access

    C:\Users\YourUserName\AppData\Roaming\Adobe\Lightroom\Preferences    (Where AppData is a system folder / hidden so you may need to enter the name of the folder directly into your browser's address bar or activate hidden folders / system in the Internet Explorer view folder options.)

    • Open the file LightroomPreferences.agprefs
    • Locate the line use = True autobahn (press CTRL + F)
    • Take Autobahn use = False


    After save the file

    Restart Lightroom

    3. also refer to that link and update GPU if you use AMD map

    Adobe Photoshop Lightroom Help | Problems with graphics cards 6 CC/Lightroom Lightroom and AMD | Win

    Let us know if this helps

    Concerning

    ~ Assani

  • When browsing from a page of the site appears "unable to connect" Although no connection problem

    When browsing from a page of the site appears "unable to connect".

    Hi Helen,

    Thanks for posting your query in Microsoft Community.

    Unfortunately, the question is not clear, please answer these questions so that we can understand the problem and help you better.

    1. which web browser you are using?

    2. what site you're talking about?

    3. this happens with all sites or with any specific Web site?

    4. What is the exact error message you are getting?

    5 have had any changes made to the computer before the show?

    If you are using Internet Explorer, follow the steps in the link.

    Can't access some Web sites in Internet Explorer

    http://support.Microsoft.com/kb/967897

    NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

    We would be more than happy to help you if the steps above did not solve the problem.

  • Why do you have my emoticons change from one day to the next and how can I get the 'old'?

    The choice of emoticons changed from one day to the next. I would like to have the 'old'. Why Gmail does not send a msg Heads Up? Thank you.

    Hello

    This does not sound like a Firefox problem, but a change that was made to Google for their e-mail service. I recommend that get you in touch with them through the channels of Gmail support and they may be able to help.

  • There was an error when you attempt to connect to the Windows Live Calendar service.

    I get this message when trying to update my calendar:

    There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.

    What can I do to fix this?

    Hello Maurizo Martino,

    As your question deals with Windows Live Calendar, there is a forum for Windows Live products.
    Please post in http://windowslivehelp.com/ under the category of Windows Live Mail.

    They will have experts in the Windows Live products that can better help you.

    Sincerely,

  • "' Windows live mail error ' there was an error when you attempt to connect to the Windows Live Calendar service.

    Original title: when I start my windows live mail. He asks me if I want to go online? Then, I get this error message? just started doing this yesterday?

    There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.

    I'm going to ask you to start your own, new topic in this forum now for Windows Live technicians can help you more-online http://answers.microsoft.com/en-us/windowslive/forum/livemail-calendar

    Tip: Include a link to this topic in your very first post so that Windows Live people know so much about your computer like I do.

    Good luck - I think that you're going to need!

  • Why do I get access denied error when I try to connect to the printer?

    * Original title: Please help me

    Why do I get access denied error when I try to connect to the printer?

    Hello

    Try right-clicking on the printer software when installing it and select run as administrator.

    See you soon.

  • Error code 5 when starting from CD/DVD - Equium A200

    I am trying to boot from the CD/DVD and get the message: cannot start from the CD - Code 5
    With the help of a cd of Windows Vista startup family.
    The CD/DVD-station is ok. Have you tried another station.
    Have also tried another HARD drive.

    Sorry, but we can't discuss on this path.
    Can you please tell us what model of laptop do you have?
    When this error pops up?
    Are you using the original Toshiba Recovery disk?

    Have you tried to start and test the functionality with different bootable disks?

  • Error when changing the language of the front panel in Japanese

    Hello world...

    I'm changing the front panel of the English language to Japanese. To do this, first I exported the strings through the Tools->Advanced-> export channels.  After that I changed one of the label in Japanese and saved with Unicode encoding (as with normal ASCII coding Japanese texts will not be read). I imported the same file I recorded in a Unicode encoding format. But it shows that the error given below

    "Error analysis during the import of channels
    to test Main.vi
    of D:\Riyas\Work\X 520\28-11-15\X520 RT-Host 20151127\Strings\Test Main_Import 1. txt
    "Saturday, November 28, 2015 11:09:14.

    (See the attached screenshot of error)

    So I tried to import the same file ASCII coding mmee, then it is successful. But the problem is that the modified label is not in Japanese that it shows a few points mark. I'm able to import the channel file saved in ASCII format code but the channel with coding ASCII file will not read Japanese texts. So please help me to solve this problem.

    I need to import a channel file saved with a Unicode encoding or in any case format to enable Japanese texts as ASCII coded format.

    I modified the configuration settings to activate the Unicode format as follows "UseUnicode = TRUE'." I'm using Labview 2014.

    Thank you...

    racahmd wrote:

    My requirement is to change the language of the labels on the front. Is it possible to export the settings of the legend and label parameters separately? Currently, I am only able to export the two together. Also when I import the unicode file that does not contain unicode characters, it shows the same error.

    Perhaps the requirement is statesd as such because the people who wrote the requirement had no idea, you can keep the labels even but change the subtitles only.  Changing labels is a massive effort that could have profound ramifications to the code itself.  Not the same with a legend.

  • Error when migrating from a virtual computer

    I received this error when you try to migration, a virtual machine on a remote server by using Windows Server '8' on both servers:

    PS C:\Users\Administrator > Move-VM-name OnTheMove - DestinationHost $RemoteServer
    Move-VM: virtual machines for 'OnTheMove' migration operation has failed to the migration source "SERVER-1950-01'.» (Virtual
    machine ID 172C44E1-E34B-4896-B450-B41CB037638D)
    The Virtual Machine Management Service could not establish a connection to a migration of virtual machines with the host
    'Server-1950-02': an existing connection was to be closed by the remote host. (0 x 80072746).
    Unable to send data to a migration of virtual machines: an existing connection was to be closed by the remote host.
    (0 x 80072746).
    On line: 1 char: 1
    + Move-VM-name OnTheMove - DestinationHost $RemoteServer
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo: NotSpecified: (Microsoft.Hyper... VMMigrationTask:VMMigrationTask) [Move-VM], Virtualizat
    ionOperationFailedException
    + FullyQualifiedErrorId: OperationFailed, Microsoft.HyperV.PowerShell.Commands.MoveVMCommand

    Any ideas? Thank you.

    Hello

    I suggest you to ask your question at the following link.

    http://TechNet.Microsoft.com/en-us/ms772425

  • Error when printing from a memory card: "year error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found connection .This has not been restored"

    Original title: there is an error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found .this connection has not been restored

    error message for a memory card has it printed

    Hello

    ·        Have you been able to print from memory card sooner?

    ·        How are you connected to the computer from which you are trying to print?

    This occurs when a computer uses the network map to connect to another computer to share files.

    To fix this problem, do one or more of the following methods.

     

    Method 1: Control equipment

    (a) ensure that the computer with file sharing turned on.

    (b) ensure that a hub network or router is powered.

    (c) ensure that the cables are well connected.

    If this does not resolve the problem, go to method 2: ensure that network resources are properly shared.

    Method 2: Ensure that network resources are properly shared

    Share a folder on a drive, then connect to the shared drive, follow these steps.

    Step 1:

    To make a folder that is located on the accessible hard drive on another computer, follow these steps.

    (a) right click onStart and then click Explorer .

    (b) right click on the folder you want to share, clickshare , and then click share this folder .

    Step 2:

    To connect to the shared folder from another computer, follow the steps below.

    (a) clickStart , then click run .

    (b) in theOpen box, type \\computer\share (where computer is the name of the computer where the resource network and share is the share name of the shared folder on that computer).

    (c) clickOK .

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error when changing of modules

    can not use the library.   Get a message error caused when changing modules.  What can I do to fix this? Mac pro

    Hi garyc

    This problem normally occurs when the files of Adobe to launch Lightroom do not have read/write permissions.

    Please follow this article changing the error modules and grant permissions to required files

    Here's a double thread Lightroom: "an error occurred when attempting to change modules."

    Let us know if this helps

    ~ Assani

  • Oracle.jdbc.driver.T2CConnection.t2cCreateState error when borrowed from the database

    I've recently updated to the latest version 3.2.20.09 and the latest version of the driver, but now I get this error when connecting. I have no idea where to start to fix this problem. Pointers appreciated.

    It's the exact error:

    To perform the requested operation, an error has occurred:

    oracle.jdbc.driver.T2CConnection.t2cCreateState ([BI [BI [BI [BI [BI [BI [BISI [S [B [BZ [J) I have

    0 vendor ID

    Thank you very much

    Hello

    Something similar to discuss last week: No ocijdbc11 in java.library.path

    Read it and see if the suggestion of a version mismatch between the ojdbc6.jar and the ocijdbc11.dll this SQL Developer resumes aid.

    Kind regards

    Gary

  • "Internal error" when changing Desktop provisioning settings

    This is getting ridiculous. Its a shame that VMware does no support whatever view assessment. A problem more like this and I swear that I will not buy this product...

    In any case, I have created a few office pools test but need to change the settings. When I click edit for an office pool, under "automated provisioning settings" it I cannot change the settings. For example if I want to disable the commissioning or decrease the number of workstations to be deployed, it gives me an error "internal error". If I try to disable the commissioning the same error occurs.

    Why is this? You can decrease the amount of workstations put into service once you create a pool?

    Thanks in advance!

    I see this error before when you try to change the settings on a pool that

    did not see it is assigned model.  Once I pointed to a valid

    model, it allowed me to change the settings.

    May 27, 2010 at 11:03 'godbucket' [email protected]

Maybe you are looking for