IdeaPad Flex 2 - 14 d: constantly running at high speed of the fan: 8.1 Windows

Similar Questions

• Satellite A100 - the fan runs at high speed after idle standby

  Hello

  My laptop is Satellite A100-912.

  The problem is when I suspend it for more the a few minutes when the fan is running at high speed. This occurs on both Windows XP and Linux GNU. When the temperature of the two nuclei will more then 51 degrees C fan slows down and begins to work as expected. Suspended for a short time (about a minute or two) the fan speed is OK.

  I've updated to the latest version of the BIOS.

  Hello

  What version of BIOS you have installed? Has recently been the machine in for repair? A few interesting facts where I need some information to help you...
  By the way: is your machine still in warranty?

  Welcome them

• ACPI fan constantly runs at full speed on Toshiba Satellite L505

  Hello world!
  I recently bought a new laptop (Toshiba L505)... everything works fine except the fan under Linux. It works constantly to max speed and I must say it's quite annoying. I know it is better to have a fan that runs continuously rather than one that is not light up at all, but I really want it to solve...
  See https://bugs.launchpad.net/ubuntu/+source/acpi/+bug/321578 for more information on this bug...
  I think that it is related to ACPI but I tried everything almos (acpi_osi change, acpi = force and other hack kernel). But whatever the OSs I throw (except Windows 7), it is always at full speed (I tried the Chakra (Archlinux), Ubuntu, and PC - BSD). With Ubuntu, I tried the last kernel 2.6.32rc7...

  Thanks ;)

  Hi sunrider.

  to understand why your machine is constantly cooling at high speed, go deep into the linux stuff...

  * but you can try "acpi = off" * instead of 'force' to give the os the ability to manage the material at the level of the api...
  Maybe there is an updated driver/module implemented who knows your chipset...

  If you "force" the kernel to manage equipment of this 'acpi' way and no module is there to do the work... you see it is a bad thing...

  or you are a geek and program a module that manages your chipset to acpi... If yes pls share it with the community...
  of course I'm kidding, writing of modules is not for me...

• New z500 - fan runs at high speed on startup

  Hello

  I just bought a new Ideapad, a MBYP9GE Z500, that I got no windows, when I turn on the laptop it works in the BIOS. The problem I have is that the fan starts in high speed immediately and it is very noisy at start up. Is this normal? I want to say how is possible that the fan is noisy so if I am not under what whether intensive? Maybe it's because I have not installed yet any system? Or is it my laptop malfunction?

  Thanks in advance!

  Hi neokenchi,

  Thank you for your response. Yesterday, I installed Windows 7 and the appropriate drivers, that solved the problem. The fan runs at high speed before installing a system was apparently the default heat setting, as you suggested.

  Thanks again!

• HP 8510W boot not until the cool, the fan runs at high speed

  I did a little research but didn't really much other than dust cleaning. I did this, even removed the fan and the heat sink.

  Operating system: 32-bit Win7

  Early days of cold, boots upwards, normally, the fan turns at slow speed. CPUID Hardware Monitor shows all the time in the range 30 c - 60 c. From a web browser will cause the fan to spped, finally at full throttle, CPUID HW Monitor says:

  TZ2_ up to 90 C

  TZ5_ up to 100 C

  Remote1 up to 90 C

  Other times remain in the range of 30 c - 60 c

  The task manager's performance tab shows 1%-3% CPU, 30-40% consumption of Mem.

  Close all does not help, time remain high and the fan continues to run at high speed. Reset does not succeed, it will cut down, try to restart and stop again. Finally, it will sometimes get a screen where Windows thinks it could not start and wants to fix/reinstall the files, or go back to a restore point. If to cool for 10 to 15 minutes, it will start normally with the low fan speed until something starts to run (CPUID HW Monitor and Task Manager do not cause the fan speed).

  So nobody knows what TZ2_, the TZ5_ and the Remote1 map 30 5 8510W mother? Is this a real plus temp likely situation, ot possibly a problem with bios/driver not reading sensor properly?

  Well well, so far, no response, but I seem to have solved the problem. I tried reverting heatsink composed of all chips connected to the conduct of heat with no improvement. By checking things right after a stop, I noticed that the graphics chip was too hot to the touch even with the new complex. This meant that it was not the heat pipe.

  Ordered a used one from eBay, put it in and now it's stay nice and cool, not more than 60 C.

  The part number for the heat pipe is 452227-001.

• 5558UP-FA of Nexus fan runs at high speed

  We have some old 5558UP-FA switch Nexus one running on 5.0.3 version and it was very noisy, I checked it was the speed of the FAN. (it is not in production)

  switch # sh fan retail environment

  Fan:

  ---------------------------------------------------

  Module fan air Speed (%)  Speed

  Direction

  ---------------------------------------------------

  1 1 front-to-Back 50 13636

  front-to-Back 1, 2 50 10266

  1 front-to-Back 3 50 13775

  1 front-to-Back 4 50 10246

  2 1 front-to-Back 50 13917

  2 front-to-Back 2 50 10246

  2 3 front-to-Back 50 13881

  2 front-to-Back 4 50 10131

  Power supply:

  -----------------------------------

  Configured module air flow

  Speed (RPM) of the direction

  -----------------------------------

  1 back-to-front 9000

  2 front-to-Back 9000

  But as soon as I upgraded to version 7.0.8 he work speed, which would be the issue?

  switch # sh fan retail environment

  Fan:

  ---------------------------------------------------

  Module fan air Speed (%)  Speed

  Direction

  ---------------------------------------------------

  1 1 front-to-Back 60 15652

  1 front-to-Back 2 60 11946

  1 front-to-Back 3 60 15083

  1 front-to-Back 4 60-11637

  2 1 front-to-Back 60 15652

  2 front-to-Back 2 60 11790

  2 3 front-to-Back 60 15743

  2 front-to-Back 4 60 11894

  Power supply:

  -----------------------------------

  Configured module air flow

  Direction speed (%)

  -----------------------------------

  Front-to-1 Back 60

  2 60-unknown

  Greetings.

  Around the 7.0.1 release there has been a change for the algorithms of the FAN speed.

  For normal fan speed definition which was 50%, 60%, which is exactly what you watch when the 7.0.8 is now running code.

  Basically, this is the expected behavior.

  Thank you

  Kirk

• I have 4 GB of RAM, but when my i play any game, my CPU fan runs at high speed and my system gets shut down within minutes.

  I have 4 GB of RAM, but when my i play any game for example NFS most wanted, my CPU fan runs at high speed and my system gets shut down within minutes. Help me solve this problem

  If you overclocked?  If so, cancel that.  If the games you play are poorly written, it is not that you can do about it.  If you have not cleaned the dust and lint from your computer within a certain time, you should do that because it accumulates and causes overheating.  For desktop computers, remove the cover and carefully use compressed gas to blow off the dust, especially around the fins in the processor heat sink and air ducts.  For a laptop, I'll ring gas compressed through the ventilation openings.

  Good luck.

• HP dx2000MT: why fan runs on high speed

  Hello, the fan in this machine works sometimes at high speed, can someone tell me why or what I can do to stop this please?

  The most common cause of a computer running at max speed fan is a processor overheating.

  This can be caused by:

  -Extended heavy load on the processor.

  -Malware can cause this.

  -If you use many programs at the same time as background tasks, who will do as well.

  -Dirty/dusty in the computer heat sinks.

  -Malfunctioning components from the motherboard.

  -Bad placement of the computer.

  -Desktop computers should be placed where they receive lots of air circulation.

  -They should also be placed away from heater vents / air conditioning floor. AC vents may be tempting to cool the machine but will cause condensation and destroy it.

  -Observe the fresh air intakes where on the computer. Generally low and/or front of the chassis. If there is a substantive contribution, move the unit out of the carpet and on a hard surface.

  -Do not keep the Tower in a small enclosed space. Computer Cabinet should never have the door closed with the runinng machine.

  -If it was a laptop, you also to maintain it on a soft surface such as beds and prefer to use it on a desk, or on the binder or other similar when surface into the fold.

  -Vista-era of HP computers are completely garbage as well. (Sorry HP, but it's true). Watch by substituting a newer computer. The new HP machines are not nearly as terrible as those made when Vista was released.

  -Hydranix

• Rear chassis fan Z400 always runs at high SPEED

  I have several Z400 workstations. One of them is much noisier than the rest: the rear system (case fan) fan is almost always running at high RPM. On the normal Z400s, the BIOS Setup. File | Speed of about 1 600 rpm of fan reports of temperatures of the system chassis. On the noisy Z400, the chassis fan speed is reported as 3752 RPM. The two Z400s run the latest version of the BIOS public, 3.57. Both have a BIOS Setup | Power | Thermal | Fan Idle Mode set to 1. Fan Idle Mode 1 to 5 on the normal Z400 cycling makes a huge difference in fan RPM. Bike 1-5 on the noisy system has hardly made a difference.

  How can I calm the chassis fan in the noisy Z400? I carefully cleaned to vacuum inside the Z400, including the withdrawal of the air cover that protects the DIMMs. If it's important, the Z400s running Windows 7 Pro with all the latest patches.

  I noticed that the BIOS Setup. File | Temperatures of the system reported a temperature of 23 C on the 0C on the noisy Z400 Z400 normal. Are there opportunities that "0C Température" means that the room temperature sensor is broken, and without knowing what the temperature, the BIOS runs the fan at full speed no matter what? If so, how would I debug/fix this?

  Thank you.

  Scott, you are quite right.

  I replaced the on/off switch and LED cable assembly, including the thermal sensor, on the noisy Z400 with a plug to a normal Z400. The noisy Z400 is now normal, with a rear chassis at about 1700 RPM fan. The BIOS reports the temperature of ambient air properly to 23 C.  'How to' instructions from HP for the replacement of the cable were good enough. Now all I have to do is to order another set of good cable.

  Scott, thank you very much, for the rapid diagnosis and useful links. This issue is RESOLVED. Thanks again.

• HP h8-1141 fan runs at full speed all the time

  Processor and fun of rear cooling fan runs at full speed on Pavilion h8-1141

  Solution:

  I cleaned the inside of the computer and all the fans. It was very dusty.

  Then I pressed my finger on all the cards on the motherboard to make sure they don't lose. As for the fans, I took out and put them back in.

  Now it's working. The fans are back to normal.

• Constantly running EL Capitan 10.11.2 fans

  Since I updated to El Capitan a few days ago, on my computer fans were constantly working as soon as I wake up. I checked the activity monitor and something in the labeled Safari'http://1771401311.rsc.cdn77.org/ uses to the top of my use of the computer in its entirety.  As soon as I left Safari, the problem goes away, but I would like to use Safari as my favorite browser. No idea how to solve this problem? Thank you

  Forgive me if this is a bit inconsistent.  This is my first time trying to explain what happened.  I think that I finally managed to get rid of it after 3 days.  I finally realized that after I force quit the process, he would raise only when I created a new tab by pressing command + t or the small sign.  When you open a new tab via a link, everything remained very well.  So, I pressed command-t and began to inspect my 'top sites '. Somehow, this spam page that says ' to call this number back on your web browser"was there.  Once I deleted that and cleared my cookies, I was honest and leaves.

• VI does not work properly when run at each full speed or highlight the run mode, but running at full speed after the starting and stopping of the execution mode games

  Start labview, so fix that will probably teach me a lot. Looked and saw a lot of posts of things only work in games of the run mode, but nothing like this. I have attached the relevant real-time and FPGA VI.

  The code is supposed to read a motor encoder. When ran regularly, it works somehow. It will update the counter of how sporadic all few seconds a fraction of a second. When ran in climax run mode, it appears really up-to-date. After that matches the execution mode is canceled, it works perfectly. Can someone find out what could be the problem?

  Ended up staring at me. I am sure that the problem was that if there is only one element in the FIFO when it checks first, it eliminates the two elements when the FIFO filled.

  Fixed it by adding a test for the number of items before and reading only if there are enough items to read. Attached file sets for reference.

  I have still no idea why he was running after delivery to highlight in the first place. We will never know. Bonus points for the answer = P

• Cisco 887VA-M not to run a high-speed ADSL2 +.

  Hello

  We have changed just a base for a router DSL 887VA dsl modem and the flow is very bad.the line and profile support ADSL2 +.  We checked with the supplier and there is no default line and the profile that is applied by the provider is 2 MB / 12Mb [line can support 2.5 Mb / 26 MB] from top to bottom.

  DSL-internet #show atm pvc interface atM 0

  VCD /                                                                    Peak Av/Min Burst

  Interface name VPI VCI Type SC program Kbps Kbps cells St

  0 1 8 35 PVC SNAP UBR 2044

  DSL-internet #.

  We manage the following IOS: c880data-universalk9 - mz.152 - 4.M3.bin

  When we run ISP speed tests we get on about 500ko/3 MB down with on 240ms ping tests.

  Do you know if there is a problem with the operation ADSL2 + on this Cisco DSL router. It should be transparent, with respect to the configuration, because as far as I know.

  Thank you

  Nick

  You can post the news of this command:

  SH controllers vdsl 0

  What is your ISP for this line?

• S50 satellite - B 15 P - Fans running at high speed and system crash

  Hello

  I have a new SATELLITE S50 - B 15, i7-5500U, 8 GB Ram, SSD etc., IV and v have some problems with it.

  for unknown reasons the CPU fan starts to operate at high speed, even if the temperature of the CPU hit is not 35%.
  It also froze about 10 times since I got it (April this year).

  The only way to make it work again would be me to hold the power button down until stop and start it back up.
  Once launched upward there is no mention of potential problems in the newspapers of events other than the forced closure.

  I just wanted to know if anyone else has experienced problems?

  Thank you

  Chris

  The only way to make it work again would be me to hold the power button down until stop and start it back up.

  Forcing order restores the fan activity and performance?
  Hmm it sounds like there must be some sort of system emits probably the bottom of some process locks the CPU and therefore increases the activity of the fan.

  You could start the the Task Manager and in the process tab, you will find all background applications that would appeal to the CPU.
  Click the CPU column to display all the processes of loading the CPU.

  However, you can also try to change the option of cooling method that is available in Windows Advanced Power options.
  Go to control panel → power options.
  Click here on the power plan that is currently in use.
  Then click on advanced power options and access the cooling method.
  Here you can change it from active to passive.

  

  In addition, you can decrease the status of CPU max at 90-05%

  

• Portege R500 - the fan runs at full speed during the recovery from sleep mode

  Hello

  The fan in my R500 works at full speed when he was in the system sleep.
  The only thing that helps is a reboot. :-/

  Is there a solution to this problem?

  Hello Allan

  I really wonder that you define this as a problem. From my point of view the problem is something else. You have a problem when you cannot boot up your laptop. You have a problem if you are unable to use certain features or if you can not open the DVD player. It is a problem.

  Back to your problem: have you tried to change the power settings, to change the method of cooling in the Toshiba power settings? Play a little with it. I optimized the use of my wholesale Satellite P200 and the fan operates at low speed. OK it is not the best example to compare the two models of laptops, but try it.