IdeaPad Y510p lights.

I have recently bought an ideapad y510p from newegg a few days ago. I tried to put in place and all that, try to get rid of programs that came preloaded with the laptop because I don't think that I would need them. I then close, put it down and open again and now it won't turn. It seems that both the power light and the battery are both, as well as the power light, but the screen itself is empty and I can't hear the computer being on. I tried holding down the power button / stop and resetting, as well as the battery and using only the AC to see if things were going to turn on but nothing works. I'm worried I might have deleted something important, but I was especially removal programs related to media players of poor quality and other similar services. It is quite upsetting I just got this laptop and he already died on me!

I tried this procedure, nothing happened. For some strange reason when I press on and hold the power button, the light if turned off but just because I have my finger light is switched on immediately.

I'll take the initiative and move forward to send it to lenovo for repair. It is covered by the warranty, so I'm more worried that I am pained and frustrated by the situation.

Tags: Lenovo Notebooks

Similar Questions

  • IdeaPad y510p clean Windows 7 install - SSD not detected

    I bought a new Ideapad y510p just before Christmas and I wanted to do a clean install of Windows 7-64 bit.

    I created a USB startup device as required and put the drivers from lenovo on her page too.

    My problem is: after you delete the partitions, the installer of windows 7 do not recognize the SSD more...
    My BIOS is set with legacy of disabled secure boot support.

    Furthermore, when it came to load the drivers, it says no driver signed device not found.

    Someone has an idea of what's going on?

    Hi Clet,

    Since the serial number on this picture, you have the 59375625 model. After digging further, this parts search page and this point merchant does not seem an SSD on the specifications list. If the reception / box indicates that you have a 1 TB + 24 GB SSD, you may need to check under the hood (see pages 38-39 of the hardware maintenance manual)

    Link to photo

    Concerning

  • Replace hard drive SSD in IdeaPad y510p

    Hi all

    I've had the IdeaPad y510p for a while now. This is the model with dual graphics, 16 GB of RAM and 1 TB HDD + 24GB SSD combo. (If you need me to be more precise, let me know). The 5400 hard drive RPM was slow this machine and I recently bought a 512 GB SSDS.

    Is this compatible with the laptop? Of my little knowledge of hard drives, I assumed it was and picked it up.

    Also, how I go on my PC cloning so that everything can be copied on the SSD drive, including start-up and all files and recovery partitions.

    And one last thing. Is the separate 24 GB SSD or the part the 1 TB HARD drive... in other words, can I keep the secondary, more small SSD in as well?

    Thanks in advance!


  • Lenovo Ideapad y510p - memory upgrade

    So since Christmas is coming, I thought it would be cool to upgrade my 8 GB RAm 16 GB my question is: what type of card Gerard, I need my lenovo ideapad y510p? and what I have to change my old memory card aswell if im buying a new?

    Also is it easy to change the RAM cards?

    The worst thing that can happen is that memory does not work with full 1866MTs, but it will certainly work.

    The first is a 2.5 "drive, so you should replace your hard drive with it. The other works, but not as a cache. If you do not want to buy a form mSATA SSD, it is best to install the top OS. Kingston is not the best brand when it comes of SSD. Discover Crucial, Samsung, Plextor. It would be a good idea to read some current reviews and comparisons of the SSD. always keep the highest priority on reliability.

  • Lenovo ideapad Y510P what kind of hard drive is this?

    Hi people,

    I have a question. Today I want to defragment my Ideapad Y510P, but I don't know why I have 5 stations of hard drive? What type of disc is \\?\Volume{3db4... (see photo)

    Gamenick wrote:
    But that disk station is fragmented by 29%, it does not matter?

    As noted that the partition has been created by the operating system. I don't know what (probably for recovery). Since there is a schedule for Defrag I think it will be supported by the system when the time comes. So I just deal with C and D and leave the others alone. The other two partitions should be used by OKR.

  • Lenovo ideapad y510p boot on CD/DVD

    Hello

    Just had the laptop y510p and I am trying to install Ubuntu, so I have this DVD bootable and I wanted to try out Ubuntu before you install as usual, but I can't get the laptop to bot on dvd. On the start menu options, there are only EFI and a kind of network options but not dvd.

    I tried following the instructions here, but regardless of how many times I press F1 during boot, I can't start menu and windows starts directly:

    http://support.Lenovo.com/en_CY/downloads/detail.page?docid=HT036814

    Is it not possible to boot on dvd. The dvd is supposedly compatible with EFI and secure boot ubuntu 13.10.

    I don't understand why there is no option to rearrange devices to boot on my old PC.

    I managed to get the BIOS configuration by pressing the restart and Maj and then selecting settings UEFI firmware and I chance to the configurations of the bios, but still no way to find the option to start on a dvd.

    Any advice? Thank you

    I managed to install ubuntu, the problem is that my cd is defective, here's a blog where I wrote about the steps

    in the case, someone must:

    http://vaxapp.WordPress.com/2014/02/09/install-Ubuntu-12-04-3-on-a-Lenovo-IdeaPad-y510p/

    I found a lot of answers here:

    http://AskUbuntu.com/questions/221835/installing-Ubuntu-on-a-pre-installed-Windows-8-64-bit-system-u...

    Although for Windows 7 the problem is perhaps that he does not support UEFI and or secure boot?

    In windows 8 type ctr + C then the power button, then press Caps + restart and then chose the option help out and something UEFI and you will restart in the bios, then you can change the settings to disable secure boot and/or inherited instead of the UEFI boot.

    When you press F12 is the start menu, but you won't see that entries that are UEFI-compatible (if you are using the UEFI) either CD or USB

  • Install Windows 7 on a laptop IdeaPad Y510p of Windows 8

    My friend just got his new laptop IdeaPad Y510p today, but as he doesn't like Windows 8, I gave her a Windows 7 disc to put on instead (as I know the drive works, as I used it twice before on two different computers). Shut down the computer, put in the disc and went to the bios to change the boot order. Windows 7 download, but when it gets to the startup screen that says "Starting Windows" with three red, yellow and blue balls, he runs for a second, but then freezes and does nothing after that. He tried to restart the computer, but it still does the same thing. He also tried by pressing the button on the side of the computer recovery, but this does not, either. What should we do?

    Hi cheyenne1433,

    Thanks for posting and welcome to the community. Based on what you have posted here, you must change the Startup Mode in the BIOS. I'm here for WOOD > "STARTUP" tab > and change the Startup Mode for Legacy Support. Then save the settings and try to reinstall the operating system again...

    I hope this helps.

    Let me know how it goes.

    Concerning

  • configuration problem IdeaPad Y510p sleep

    About 2 weeks ago, I bought a Lenovo ideapad y510p laptop with graphics 750 m SLI. The first thing I did was to remove the excess of bloatware that comes with the laptop and have had a very positive experience with the machine together.

    Recently, I noticed if I let my laptop idle, he spends in sleep mode pretty quickly. I tried to adjust the Power Options in the control panel to allow the computer to stay awake for as long as an hour plugged and 15 minutes on the battery, but the laptop still go to sleep after having been slowed for only 60 seconds. In troubleshooting, I tried to re - download management utility of the energy that the laptop comes with, but still, he goes into sleep in about 60 seconds. I tried to update my video drivers too, but my computer tells me that they are currently up-to-date.

    I'm not sure what I should try, but if someone else has a suggestion, I'd be happy to give it a try.

    Thanks in advance,

    Jason sheets

    Apparently my problem disappeared!

    It is dificult for me indicate exactly what measures or combination of steps worked for me, but after selecting the option 'balanced' in the power settings and adjust that power to my taste options, my cell phone is always placed in standby mode after one minute ("sleep" mode had been established at 30 minutes). I have re-uploaded Lenovos "Energy management" utility and set the settings to my liking and also installed a windows update. After a system reset, it seems that I have total control over my settings of power once more!

    I don't know if the solution lies in the update of windows, the system restarts or management utility power, but one or more of the following has solved my problem. I hope someone out there finds this helpful thread!

    Thank you very much

    Jason

  • TPM on Ideapad y510P?

    I feel silly even asking this question, but I wonder - is it possible to activate the TPM on an Ideapad y510P with a upgraded BIOS or don't chip that comes with the 510 simply not supported TPM?

    Thank you.

    Hi jetboy2k

    According to all PDFs of this model, I don't think that it has a function to use the TPM.

    However, this thread can help,

    http://forums.Lenovo.com/T5/Lenovo-3000-and-Valueline/H520-TPM-BitLocker/m-p/1237517/highlight/true#...

    Concerning

    Solid Cruver

  • IdeaPad y510p battery not charging.

    I have recently just got my computer laptop y510p Ideapad and I unplugged and the battery fell to 60% but when I try to charge my cell phone, it will just stay at 60%. Battery is said sound plugged in, but it does not load.

    battery indicator tried?

    also, try this:

    Remove the battery, disconnect the power supply, press the power button / stop for 30-40 seconds, replace the battery and check if it works.

  • IdeaPad y510p synaptics cannot be removed.

    Hello I have a y510p Ideapad with synaptics I want to install newset version Synaptics driver but when I try to uninstall the old driver it keep longer display this message:

    You must have administrator privileges to uninstall device driver

    My connected account's administrator

    and I use Windows 8 pro.

    I removed in safe mode.

  • IdeaPad Y510P RAM problem.

    I have a Y510p ideapad. I get windows errors MEMORY_MANAGEMENT bsod specially. I'm changing my strips of memory and I don't know what kind of ram will take the system. I discovered that the first DDR3L RAM are installed inside. I want to know is the system will take DDR3 RAM or not instead of DDR3L RAM.

    harrysane wrote:

    I have a Y510p ideapad. I get windows errors MEMORY_MANAGEMENT bsod specially. I'm changing my strips of memory and I don't know what kind of ram will take the system. I discovered that the first DDR3L RAM are installed inside. I want to know is the system will take DDR3 RAM or not instead of DDR3L RAM.

    For the bsod problem try to start windows memory diagnostic tool. This is based on your expanded it is a memory problem.

    For the question, determine you the processor model number and look up (plug) in site Intels. You should see other features of the type of memory to use (if DDR3L or DDR3) for a good game.

    Update:

    Here's how to run diagnostics: simply click the circled option shown after you type memory in the search box.

    Assuming you have I7-4700MQ, this will be the result in the Intel Web site:

    From there, the answer to your question is NO, you cannot use DDR3. You can use only the DDR3L 1333 or 1600 Dual channel No. ECC memory support.

  • Windows on Ideapad Y510P ExpressCache question - gel Constant 8.1

    Hello

    I recently bought the laptop Y510p and updated to 8.1 windows

    Since the upgrade, I'm telling gel, which could last 10seconds or 10 minutes.

    Any time I restart the computer, it crashes, and the only way to kill him is to press the button works / stop.

    Checked the eventviewer and I found the following disclaimer appearing every minute:

    Log name: System
    Source: iaStorA
    Date: 20/02/2014-17:36:40
    Event ID: 129
    Task category: no
    Level: WARNING
    Keywords: Classic
    User: n/a
    Computer: DARIUS-PC
    Description:
    \Device\RaidPort0, restore the device, has been published.
    The event XML:
    http://schemas.Microsoft.com/win/2004/08/events/event">


    129
    3
    0
    0 x 80000000000000

    7422
    System
    XXXXX



    \Device\RaidPort0
    0F001800010000000000000081000480040000000000000000000000000000000000000000000000000000000000000004000000810004800000000000000000

    After much research, I came to the conclusion that the ExpressCache is the cause.

    at the time wherever I've uninstalled it, issues disappeared.

    System will reboot without any problems, it will not be freez.

    Checked the following article:

    http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT074404

    Tried to re - install ExpressCache but the problem started to presist immediately, constant freezing and the message above in Event Viewer.

    Everyone knows the same problem? If you did, did you mange to solve?

    Obviously, I'm happy at this stage that frost has disappeared, but at the same time, I really would like to have full use of the system and would like to get it resolved.

    Any help much appreciated.

    Hello.

    Talked with Support and unfortunately, this seems to be a matter of HW.

    Given that I've owned only the laptop for less than 31 days I received a full refund/replacement code.

    I would say that anyone having the same problem, contact technical support and advises because that is the question to support him rather than S/F.

    Kind regards

    Darius

  • IdeaPad Y510P feels warm around the vent?

    Hello again! I am very satisfied with the way my Y510P works now that I solved the problems of wireless connectivity, but I'm a little worried about somehting else...

    Yesterday I spent a LOT of time play Dark Souls 2 on it (and when I play, gets blazing hot on the left of the area around the vent at the computer - I guess that's because I have configured everything to the hightest performance, etc.) and nothing happened, but now I use it and the event feels a little warm.

    I don't know if it always was so since I never really paid attention to this and it could be my mind playing tricks on me because I'm worried like that :/

    It is... Could play for a long time with the wind being at these high temperatures have caused some sort of problem with my fan or something like that, or the evacuation zone is still very hot and I only notice now?
    One of my friends who is much more knowledgeable about the material that I thought: "If your computer ever so hot that some might get damaged it would close and tell you before something bad happened" but I want to make sure that D:

    Thanks in advance...

    Your friend is right. Your computer laptop CPU and GPU, when it detects that it runs at too high time, then it will be post stop the system before what is seriously damaged. I think it's about 105 before i7M CPU to do this. This is not to say that it will reduce the life expectancy of your computer parts well. However if you replace your laptop every five years or more then you should not have anything to fear.

    One of the drawbacks to the games on laptops is the heat - 90 c is not abnormal in these situations. My Lenovo becomes quite hot too around the vents.

  • IdeaPad y510p Wireless Card compatibility

    I just got a new router with 5 GHz and 2.4 GHz, and to my dismay, I saw that my laptop does not pick up the broadband 5 GHz. is it possible that I can get a new wireless card or change my existing to pick up services to wide band 5 GHz?

    I don't mind if it voids my warranty.

    killerbunny123 wrote:

    I just got a new router with 5 GHz and 2.4 GHz, and to my dismay, I saw that my laptop does not pick up the broadband 5 GHz. is it possible that I can get a new wireless card or change my existing to pick up services to wide band 5 GHz?

    I don't mind if it voids my warranty.

    You must use a wifi card dual channel. Referring to page 87 of the Hardware Maintenance Manual it is possible (highlighted in the attached photo). These three are in the Y410P only then they may not work for the Y510P (this can be a restriction imposed by Lenovo in the Bios - whitelist).

    To lift the restriction referred to white list of your bios should be changed. There are sites that offer to do it for you. However, note that you yourself if use you this unit in brick.

Maybe you are looking for

  • Cannot find drivers for my Satellite A200-1JD

    I bought this laptop about 3-4 months ago... I can't find support and drivers anywhere on this site. As it has never been done, searched with google too, but still nothing about it... Model name: Toshiba Satellite A200-1JDModel number: PSAE3E - 02501

  • Aspire M5 'Default boot device lack or failed to start.

    Hello and thanks in advance for ANY help you can offer. I have an Aspire M5 that suddenly no longer starts and gives the message "Default boot device boot failure or lack" and claims recovery media to be inserted. I usb recovery media and have also s

  • laptop drive HP pavilion didn't not backup

    Hard drive failed, and no disc came with the laptop. Foolishly we did not a backup. I have an ssd that is installed now and do not have the product key of windows 7 to the rear of the machine (although we have upgraded to windows 10. How to make a co

  • Opening network Photoshop files becomes impossible to complete your request because of a disk error

    If my client using a MAC is trying to open a Photoshop file from the local network, he will receive "could not complete your request because of a disk error." But if he opens an Illustrator file he will receive "the file xxxxxx.eps is in an unknown f

  • put body image into APEX_MAIL. Send

    All,I use APEX_MAIL. SEND to send emails and I want the background image for the body to is also reflected in the emails sent so ive something like that.v_body_html: =.' < html >< head >< style >body{background: #ffffff url ("bgimage.png") no-repeat