IdeaPad Y560 wifi detects all networks but don't connect at all!

Similar Questions

• Windows Vista Business ed. reformat - my computer detects the network but will not connect to Internet

  Can someone help me, I can't reformat a laptop compact with a windows vista Business edition OS. I was wondering if I could use the recovery partition or do I have to use an installation CD. And by the way, just to give you a head I'm just a beginner and badly needs help. the problem I had is I get a strong signal for my WiFi, but again it is not connect to the internet it connects sometimes but then after I reboot my phone it comes back with the same problem, it connects to the internet, but I detect my network, someone told me to just reformat the entire system. I hope someone can give me a help step by step on how to do it. and also I do not see the product key for my system. your help would be greatly appreciated thanks

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Formatting/reinstalling is overkill. A bit like buying a new car because you have a flat tire.

  To reinstall, you can use either the volume of recovery or the recovery disc, both should work pretty much the same. In general, the product key is located on the system like a sticker (on laptops usually on the bottom). If you can't find yours, you should contact the provider or your network administrator (and in fact, if there is a working system, you should contact them before doing anything).

  Before you do this right, you can try this: click Start and type CMD. Right click on the menu entry that appears and choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, run:

  ipconfig/release

  ipconfig/flushdns

  ipconfig / renew

  Allow everyone to finish (return to the command line) before proceeding to the next. When you are finished, close the command prompt. See if that helps with your problems of connection.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• WIFI on my C850 Satellite can detect the network but will not connect

  I just bought a satellite C850 - PSKCCA-02D00M

  The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.

  All other devices connect very well as Iphones and Kindle

  In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.

  I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.

  Any help is welcome. I don't want to have to take back just for this issue

  See you soon

  Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
  Have you tried to reboot your router?

• X 200 wireless problem - detects available networks, but cannot connect to them.

  Hi all

  I have a weird and annoying problem. My X 200 can detect wireless networks but refuses to connecto to them.

  It's a brand new computer that I just received.

  Some info:

  ThinkPad X 200 7454-2HU, running Vista x 64.

  Downloaded latest drivers installed, all using the autopilot to Lenovo download application.

  The driver has detected in the Device Manager is: Intel Wifi Link 5100 AGN.

  There is no problem with the wireless network (the other computers connect to it without any problems).

  I tried to cancel the option "n", leaving a "b/g", but it did not help.

  It is problematic that only one device in Device Manager, and it's "Controller of Bus SM" (cannot understand what it is and update windows or Lenovo update does not solve this problem).

  When I use "Intel ProSet/Wireless Tools" diagnose, I get:

  Test equipment: managed (wireless hardware is enabled)

  Pilotass. Driver is loaded. NET w5v64 Versio: 12.0.0.82

  Radio test: past. The radio is on.

  Scan Testass. There are 12 networks available to connect.

  Association test: failed. No partner.

  When I look at the statistics, it seems that the card receives bytes (nothing is sent).

  What do you think? Is it a hardware problem or software?

  No idea what can be done if it is a software problem?

  S.

  
  

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• T430 to 6300 Centrino ultimate upgrade detects the network but cannot connect

  Hello

  I recently bought a wifi card 6300 centrino on ebay with the correct FRU (60Y3233) of a centrino 6205. The new card detects networks, but it can't connect to the networks. no idea why?

  Edge has 6300 card option, so who have already sold it is you already tell you a lie.

  If reinstalling the drivers do not work, and your card 6205 worked previously then it means that this card has a problem that the seller did not talk to you.

• Canon MX860 will print over wireless network but don't scan (W7 OS)

  I have two laptops with XP and one with Windows 7 64 bit. Both connected to a router Wireless Linksys - internet connections well, feel very good on the two machines. The XP laptop will scan the network, but the Windows 7 laptop gets a dialog box of Scangear with this message: cannot communicate with scanner, for these reasons scanner is turned off scanner is disconnected. Have uninstalled and reinstalled all the software and drivers (with firewall disabled according to the instructions of canons), loads software successfully - but still no luck with the network scanning. Also downloaded Scangear tool - but when he's looking for the network printer, it does not. Support of Cannon says now there's an incompatibility with W7 and Microsoft can only solve the problem. Also noticed that the Canon IJ Network tool is loaded, but it does not work on W7 - new OK on the XP machine machine. Would appreciate any suggestions.

  Thank you

  John W

  If Canon say its not compatible with win7 is something for Canon to fix and not Ms

  Probably that you have installed drivers updated from the Canon site

• Cannot connect to my network, but I can connect to my network of neighbors several.

  I can't connect to my own network from my laptop/Vista computer Home. I can connect to my neighbours networks without any problem. I don't know why I can't connect to mine. When I do, it is said that LocalOnly.

  I can see my network but cannot connect to the internet.

  Hi Rhonda,

  Looks like you are faced with the question for a while now and I know it might be boring. But, do you have to follow the above troubleshooting? If so, what was the result?

  You can take a look at this article and see if it solves the problem.

  How to connect to a wireless network in Windows Vista

  I hope this helps!

• Pregnant wireless Bose SoundLink has been integrated with success but don't connect/play audio via Bluetooth

  Separated from this thread.

  How did you get your SoundLink Mini system works? I have the same camera, he paired, but does not connect properly.

  I'm not sure it was a while back, but after having revisited the installation instructions, I think I uninstalled it to devices and printers by selecting 'delete device '.  I think that I also removed from the Blue Tooth device section in Device Manager.  I probably also removed the PC as a device coupled to the BOSE by pressing the bluetooth button on top of the soundlink speaker for I think that something like 5 seconds (see Manual)

  I've then matched again according to the instructions of Bose.  Since then, he has worked perfectly.  I think that they don't make it very clear what is supposed to happen as part of the connection process when you want to use the device.  When the computer is turned on, press the power button on the Soundlink.  There is a small white light above the button on the Bose Blutetooth.  It starts flashing and you will get a single "beep" that it connects, the white light is solid and it is connected

  Hope this might be of some use

• OfficeJet 6000 E609n - Wireless concludes SSID and secure network but will not connect

  I use Mac OS 10.5.8. I installed the printer for USB and went to the next step to configure wireless. My secure network, it obtains the SSID and then asks the WPA personal password for the network. I enter this and click on continue and the message comes back, "the Wi - Fi network selected «...»» ' is not within reach of the unit. ' Button choices are 'Change network' or 'Retry '. Despite attempts unsuccessfully repeated. However, I scanned for other networks and found a secure and connected to this network. Go figure. My router is sitting on my desk next to the printer. The router is a D - Link DIR-655 n I'm on cable for ISP services. When I first bought the printer, we were away on vacation, and I've successfully added to my Mac laptop. I have reset the printer found in the then successful and user guide to establish a connection to the House, with the unsecured network (I don't live in a condo so no idea whence the other network). Thank you.

  You can try to update the firmware on your router.  Some of these models have had problems with HP printers and Netgear was subsequently fixed it with a new version of the firmware.

• Canon MP560 print over wireless network but don't scan (OS Windows XP Home edition)

  I uninstalled and reinstalled the software many times without success. I also called anon Help desk and after 45 to 1 h, still no luck. It worked when I had plugged USB but with wireless scan does not work, and also does not open MP Navigator. Any ideads or fix

  I now have my issue fixed. I called Canon Help Desk twice and each time they were on for an hour and more, after the second time, they said it was my pc that was the problem. Well, their after disable me my anti-virus several times and still no solution, after the last time, I discovered that even when I turned off my antivirus, it still doesn't work, then I realized that the firewall ESET NOD32 is always enabled. Then disbaled the firewall and then the software for my Canon MP560 was able to detect and to complete the installation. Now everything works fine wireless. After more than a week, it was something so simple, but with all the experts, telling me what I should do, it wasn't anything thay suggested, but something I thought was disabled with the anti-virus, but was not. So thank you all for helping me with this problem.

• Photosmart Prem C310 install problem, printer is located on the wireless network but don't see iMac

  Try to install this printer. It works via USB, but when I get to the step of configuring wireless and you're

  said to unplug the USB cable, it gives me the following, not accessible DEVICE... The network configuration has been correctly transferred to the device. However, to continue to configure the network device, your Mac must have access to the device. So please make sure that your Mac has access to the network: "mynetwork" and try again.

  The printer is on the network end def (I can ping ok), but the MAC can not see wireless and wont print. I've seen a few threads with similar issues and they suggest wiring the IP address in the printer setup process, but that does not work for me either. Very frustrating, any help would be great

  It could be disregarded in charge of your router BT of Hello.

  Let's try present first, if:

  1 reboot the router to BT by pulling its plug momentarily.

  2. download and install this: http://support.apple.com/kb/DL907

  3. restart your Mac.

  4 reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Compact Z3 registering on the network, but don't get any cals

  Hello

  I own this model for almost a year. Today it disconected from the mobile networks and after conecting to return it does not support the call.

  When I try to call said, mobile network unavailable, BUT I always use 4G for the transfer of data and can do everything on the mobile internet from my provider.

  Thank you and waiting for quick fix.

  Hello

  Have you been in contact with your network provider to see if there are errors in the network at the moment? You have the opportunity to try another SIM card? Maybe a SIM card from another provider to see if the same thing happens.

• HP Mini 2102, wireless detects networks but does not connect

  Hi, I have recently reinstalled Windows 7 on my HP Mini 2102, downloaded this driver
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 32...
  
  I tried to reinstall, but it still does not work.

  Finally solved the problem, I ran CNettoyez and deleted the registry who have not been used, worked like a charm and now I can connect wirelessly.

• Restarted my WRT160N, now my laptop connects to my network but will not connect to internet

  I forgot my password to the original network so I restarted my WiFi router, now my computer reconizes my home wireless network and connects (accepted the new password and all), but when I open my browser, it cannot connect to the internet. My internet connection still works when I plug my laptop directly into my cable modem, and my laptop says that I'm connected to my wireless network, so I don't know what the problem is here.

  I was pulling out my hair for the last few hours trying to find a way to solve this problem, so any help would be greatly appreciated.

  Thank you

  Go here to check your cable configuration.