IdeaPad Y560 with BIOS 71 heat problems

Hey guys...

My idea Pad y560 was excellent with no ants... or other problems... UNITLLLLLLLL

I say the new version of the bios:









Update the BIOS 71 2011-02-17

and I got the latest driver for my ATI Radeon 5730, who recognize my card grafical perfectly... AND NOW...

IT STARTS TO HEAT UP BOATS... ON MOVIES, GAMES... ON BROWSING THE INTERNET... SAME WITH MY COOLING PILLOW UNDER MY LAPTOP...

guys... I think that ' the bios update killed it... and it stops without warning or anything elses...

PLEASE INDICATE a sloution... you can roll back the bios?

change note: change the subject to match the discussion


Tags: Lenovo Notebooks

Similar Questions

  • IdeaPad Y560, no chance to update the graphics?

    Hello community of lenovo,

    I own an Ideapad Y560 with Windows 7 64 bit. In September, she celebrates her second "birthday". The graphics of the games are improving, then the graphics chip for the Y560 is no longer up-to-date. Is it possible to replace the old with a new one?

    No it's not. you need to buy a new laptop

  • Lenovo Ideapad y560 (Windows 7 sp1) bios (30CN71WWW) update problem

    Hello

    I am a Lenovo ideapad y560 user. I tried to load the '30CN71WW' but blocked loading Bios Update.

    "Could not load the driver C:, bios, 30CN71WW, PHLASHNT. SYS.

    Please verify that your accounts, if you have no administrator privileges, please sign in again!

    This driver has been blocked by a loading

    Error code: 1275 "

    What can I do?

    Thank you

    Concerning

    Bülent

    Bülent

    You should contact Lenovo http://support.lenovo.com/en_US/

  • IdeaPad y560 radeon 5730 black screen, older version of the driver needed

    Hi all

    I got an ideapad y560 0646 with i7 and radeon 5730 without switchable graphics. After startup, the windows logo appears and then only a black screen. no windows logon. It is possible to start with the standard vga drivers. im running windows 7 prof 64 bit. I remember that I installed windows 7 32 bit in November 2011 teacher and after installing graphics drivers from the homepage of lenovo, I faced the same problem. so I just kept using windows 7 64 bit. I think that there is a windows update that has caused the problems for windows 7 64 bit. I installed the latest drivers, but it did not work. I think that it is not hardware issue because ubuntu works well. I would try the old drivers that came with the y560 on cd. Unfortunately, I can't find the cd.

    Some have old driver cd and can download the drivers or name the file of the driver so I can download it from the web?

    no need to do so. the black screen issue is resolved. and the blue screen issue 0101 when you connect the ac charger cable, too. I had to adjust the power settings in windows. mininmal performance is set to 100 per cent for execution with the cable. If you set it to 5% as a battery-operated, is not breaking. Maybe this could be one solution to others to have the black screen after the windows logo.

    Here's what to do:

    start in safe mode and adjust your power settings to run with the AC adapter / CC. define the minimum performance of 5%

    Please let me know if it works

  • Lenovo Ideapad Y560 very slow just after the start

    Hello!

    I have a weird problem with my laptop Ideapad Y560 (2 years). I was wondering if any of you have a similar problem and looking for a possible solution.

    As soon as I start the laptop (either), it is very slow for the first 3-4 minutes. Nothing to really works or opens, it hangs for a while and runs my entries of keyboard and mouse with a considerable delay. After this period of 3-4 minutes, it works perfectly fine, also responds well/crisp as the lappy was brand new. I can't understand why he behaves in this way.

    I almost never stop the laptop and generally just put it to sleep. However, I have this problem (as described above) if I turn on the lappy a stop or a State of sleep also. Anyone seen this before? Could someone please suggest possible solutions? Any help is very appreciated! Thank you!

    lprassanth wrote:

    Thank you. I did it twice and I got a message that he "did not for any breach of integrity" at every opportunity. Restarting the machine. Problem persists.

    Try the manual cleaning of Windows and then follow-up with defrag.

  • IdeaPad Y560 battery does not

    Hi all

    I have a notebook Ideapad Y560, I had a problem with the battery yesterday. It worked fine until I have stop the laptop yesterday evening. The laptop off just when I unplugged the AC, battery included. And of course I can't start the laptop without AC now. I installed the power manager, and it is said without battery installed. The battery worked fine until yesterday. When I plugged AC in, the counter shows he is in charge, but the power volume is not going upward.

    What is battery failure? Any input would be appreciated. Thank you.

    Yes, I hope that I have don't have the lame air. I wanted to just make sure. You'd be surprised to know how much the computer provided in my work and that is the question.

    For me, looks like your battery is shot. Looks like something is worng with the Council on drums. You may be able to take it to a battery more to test them.

  • IdeaPad Y560 wifi detects all networks but don't connect at all!

    I have an ideapad y560, recently I installed a fresh win 7 ultimate 64-bit. Everything is perfect, except the wifi, it is not connect to any network, even though it detects all the and asks for the key, but ends up saying "windows could not connect to .

    Let me explain in words:

    1. wireless driver works correctly

    2 - Wifi detects all networks and demand the key to connect

    3 but it says "Windows could not connect to.

    4. connect to ad hoc networks without problem

    5 - LAN connection works perfectly

    6. each driver is updated (network, BIOS, Bluetooth...)

    7 - Windows is being updated

    8. all the existing solutions in each forum are put to the test

    Any suggestions?

    Hello

    He had a preinstalled operating system that has win 7 home x 64, the computer was full of viruses so I need her erase and install a new one.

    The good news is I spent all night on this subject, and this morning I fixed the problem after 72 hours. That was very interesting!

    I went on the last restore point and it fixed the problem, I do not know how, because the wifi was not connect from the first moment, I installed the win 7 ultimate, which was average, before the creation of this restore point!

    Thanks if buddy!

  • 14F L40 satellite with a graphic resolution problem

    Hello!

    I have Toshiba Satellite L40 - 14F with XP Home SP2 and BIOS 5.10.

    I installed this OS with the old version of the BIOS (1.60 - if good I remember)- and everything worked well.
    About a month ago, I upgraded the BIOS to version 5.10 (by that I repaired
    problem with no Wi - Fi LED lighting) and laptop worked too correct.
    But yesterday XP started with the depth of display resolution 640 x 480 and 4 bit color!
    When I tried to change resolution back to 640 x 480 and 4 bit color :(

    There are no errors in Device Manager and no problems with other devices.
    I reinstalled the graphics driver (the same who was working ok and last of Intel)
    and no effect. With the XP system only - driver resolution and colors are ok.
    Finally I formatted the partition, XP reinstaled with drivers - and... resolution 640 x 480! :(
    Other devices (WiFi, audio etc.) work well.

    Where is the problem? Is this driver Intel graphics can t work with BIOS 5.10?
    Why system worked properly with the same drivers but not now?
    Maybe I need to go back to old BIOS and reinstall XP - but Windows install
    This change is impossible...

    Help me please :)

    L40 - 14F Satellite belongs to the series of PSL4CE. Am I wrong?
    Could you please check the number at the bottom of the unit? Thank you

    As far as I know this laptop was equipped with the Mobile Intel GL960
    Chipset Express (code name; ClestlineGML)

    Right now, that the European driver Toshiba page provides the BIOS XP v5.40 - WIN and Intel display driver v6.14.10.4833.
    But I wonder if you have installed the good BIOS?  :|

    Try to upgrade to version 5.40. It is designed for the PSL4CE series.

    If the update of the BIOS will not help you, then a problem of graphics card might be possible

    One question; Have you noticed the same problem with OS installed since the Toshiba Recovery CD?

  • Pavilion g6-2235us: heating problem

    I don't know what to do for his problem of heating... it is heated on a use of the lamp... and for the games. don't ask her single gal or thermally some time stop. Really it heated so much worse, I had already sent to the HP service center but heating continues. Please bypass this issue

    vibhav56 wrote:
    He was doing in April right there that my components laptop just stop working (keyboard, touch pad)... but after having repaired a month of heating problem, new beginning or for games, I do not use heavy... only NFS 2012, CS Games only... and even those games is not working properly... Please suggest what to do...

    FYI your form does not work, you may think that it will be - but to the laptop, it can't handle it.

    vibhav56 wrote:
    A question what is the life expectancy of the battery... FR my laptop warranty on in November 2014 and the battery drain so fast... not even give a backup of time. For me I not happy with this laptop... not for performance, built or the work of m...

    Batteries do not last forever...

  • HP envy 4 ultrabook heating problem

    I am facing heating problem with my new HP envy Ultrabook 4 when I used my laptop on the lap for 15 min or any surface. I am not happy with my Ultrabook, according to the specifications of HP Ultrabook has technology cool sense.

    msraju wrote:
    my position is the Sweden and the temperature is 10 to 15 degrees.and my room temperature between 15 and 25 degrees only.

    If this is the case, then you should not see questions like that.

    What are the CPU temperatures you saw?  I recommend a free utility called CoreTemp.

    What software utility you use to get the information of temperature.

    In the Netherlands, where I live, the temperature was on average overall about 15 degrees. My Envy17-3002ea ready to temp CPU (Intel Core i7) of 45 Dec C at idle.

  • Lenovo Splitscreen messed my monitor - Ideapad Y560

    Hello. I have a Lenovo Ideapad y560 and completely messed up my monitor. The material is very well, but I played around it's a little bit and you click a custom split screen option and now I can only see a weird pattern now (didn't have a second monitor plugged. Maybe she?). I'm going to atach a picture so that you can see for yourself. I can still see my mouse and move t. and everything seems to work perfectly, but I can't see anything. I tried to reboot and after the login screen, he returned to the model. I can still start normally in safe mode without any problem.

    If you have a solution please let me know.

    The fixed! I ran repair the system and after the reboot, it works beautifully.

  • Dell Latitude e6430 core i5 heating problem

    Mr President, I have Dell latitude e6430 running windows i5 is 10 having heating problem it is light enough heat to burn the hand on the left side of the laptop and that's when the battery is also reduced. Please kindly help me solve this problem

    I like to think of that update you the System Setup (BIOS). Please enter your service tag (or use automatic detection of your product) on the link below and then click BIOS.

    www.dell.com/.../Products

    I also suggest to read the article in the link below, if all goes well it help.

    EDIT

    Download.cnet.com/.../troubleshoot-your-Windows-Laptop

    Learn more... >

  • R415 with Opteron 4200 series problem

    Hi team.

    I have problem on R415. currently I use with bios 4162EE opteron 2.2.1 (later for now).
    And today, I change CPU to 4284. The server can boot normally until arrived at the stage before entering windows 2008r2 OS.

    I saw the screen showing by 'error: unsupported processor and motherboard combination. " "Please install opteron 4100 Series UC." and can't go anywhere.

    Can someone help me know how to fix?

    Thank you
    Foxley

    Daniel. I got it.

    Thank you

    Foxley

  • I have a partitura with 18 instruments. Problem is that only 16 of the sheed. How can I vertically down the music?

    I have a partitura with 18 instruments. Problem is that only 16 of the sheed. How can I vertically down the music?

    Make a score set with 18 all instruments. Then use the scale parameter set score to all fit on a single page.

  • I, can't, activate, Pasco, or, touch, id, to notes, with, BIOS, 9.3, update.

    I, can't, activate, Pasco, or, touch, id, to notes, with, BIOS, 9.3, update for my iPhone 6 s +.

    Peter

    I didn't quite understand your post. Try to repost without the comma and use real words.

Maybe you are looking for

  • upgrade to OS Sierra

    Hi, my MacBook Pro introduced in late 2009 with OS El Capitan, Can I upgrade to the new OS Sierra? and if not and installed upgrading of what could go wrong?

  • What's Windows 10 good for Skype?

    Since you are reading some comments on Skype crashing, I was wondering if Windows 10 will be good for Skype long term...?

  • T410 USB Ports not working not

    Hello, I would just start by saying I am new here and I'm not too aware of the label, so I apologize in advance. I bought a 2522EC8 from Lenovo Thinkpad T410 manufacturer refurbished a few days ago. My USB ports are simply not what either. I tried to

  • A time waiting for data acquisition

    What is the best way to increase the time of settling on measures Visual C++ of the PXI-6255 A to D? We needed to make some changes of material which gave rise to a measure by a voltage divider high resistance (24.7 k and 100 k) with secondary action

  • format of port

    LabVIEW dear Experts, Can someone please explain the format of port for digital entries? I just got a new Omega OM-USB-1208FS and I am trying to use its digital i/o lines to control the LED sequences (there are 8 total led and I would do a VI that li