IdeaPad Y570 fan works not properly

Similar Questions

• Product # LW370UA #ABA; cooling fan works not properly!

  My computer product phone # is LW370UA #ABA

  Message started coming indicating that the fan did not work properly and can lead to frequent stops.

  Well... it stops frequently. What can I do?

  Hey mnorfleet,

  Can you confirm whether or not the fan actually? Maybe you can hear, feel the air flow, or even see it.

  If she seems to turn, maybe it's a little dusty in the movement of air flow or fan here and barriers. You can use a can of compressed air (available at any office store) to blow some of the dust.

  If the fan does NOT spin, I recommend strongly immediately calling assistance from HP to set up a repair: http://www8.hp.com/us/en/contact-hp/contact.html

• cooling fan works not properly when power is turn on

  I have a HP Pavilion Notebook PC g4, serial number: 5CD1202OQT and its product number is LN421PA #ABJ. Whenever

  I turn on the power, there is a message telling me that the cooling fan is not working properly. But before that, my pc fan used to

  make big noise when turn on without warning for this message. Now I know why this noise (FAN) has disappeared, but the message keep showing everytime I turn on my hp notebook. sometimes if I use my notebook hp longer for example watch film on it, it will turn off its own... help me with this problem or what to do?

  Hello

  Access the site of HP equip your product number select it the OS then update the Bios.

  Concerning

  Maton

• Cooling fan works not properly.

  Sorry if this is in the wrong forum (Please direct me to the right place in this case). My fan is not spinning and overheat in a few minutes, I really don't want to use my laptop for fear of damage. I have completely disassembled it, has taken the fan and deleted every grain of dust, I got right inside the area of the field also. When I re-assembled (less than the numeric keypad) and turned on the laptop the fan kind of shaking a bit but do not turn, I can manually turn it so there is no blockage in there. Is there anything else that could be the cause of no spin? I'm assuming that the fan is ok connected due to the tremor on the startup. Any help greatly appreciated, thank you.

  The manual is not clear, but I think it's this one:

  For use in AMD UMA computer models 639463-001

  I think you had better take it hand back and get the number on the right side of the horse's mouth

  Here is the Manual:

  Manual

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite A50 - 109 fan works not properly after the HD upgrade

  Yesterday, I upgraded the HD of my laptop A50-109 of 3 months. The original HD installed in the laptop was (to my surprise) a Fujitsu HD 40 GB 4200 RPM 2 MB cache.

  So I've upgraded to a Toshiba 80 GB 5400 RPM 16 MB of cache and had to re - install Windows XP Pro and all the drivers of toshiba.

  Now, since the upgrade, the fan is constantly working even when CPU power, cooling method and all the others are on the lowest setting possible. Before the upgrade, the fan would obey the parameter of cooling method and the fan would be COMPLETELY silent, IE does not work because there was minimal use of the CPU, etc.

  Now the situation has changed, and the fan runs constantly no matter what use. I am terribly disturbed by noises, and I see no reason for the change.

  Is there a solution or should I return the HD or laptop?

  Hi Simon,.

  A very interesting discovery.

  Kind regards

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• iPhone upgrade of the navigation software now works not properly

  iPhone 5

  New IOS software updated and now the navigation screen not working not properly

  is your site on?

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Manual lens correction works not properly.

  I am trying to correct the perspective of an image in lightroom or in the vertical and horizontal manual lens corrections are not working properly, they are extending to the image in a weird way. I used these cursors repeatedly but I don't know why sometimes, they stretch the image. Here's a video that shows the effect of cursors: Lightroom: manual lens correction works not properly - YouTube. I would like your opinion on this is that you know how I can solve this problem. Thank you

  Controls LR Vertical and Horizontal Correction lens are designed to 'fix' the perspective distortion. What is the perspective of "normal"?

  Normal lens - Wikipedia, the free encyclopedia

  Lenses wide angle move the vanishing points more far and telephoto lenses get the close.

  https://en.Wikipedia.org/wiki/Perspective_distortion_%28photography%29

  LR Vertical and Horizontal controls use the focal length and camera metadata from the image file and adjust the image based on its effective focal length. A goal of 200mm if on a 1.5 crop body factor has an effective focal length of 300mm, resulting in an extreme telephoto perspective. That's why you see more "stretch" the image when you adjust the Vertical control, with a focal length lenses below)<>

  The image file video YouTube has vertical converging vertical very light, slight clockwise rotation and distortion in light pad. You should be able to correct the image for parallel verticals with small values of Vertical and Rotation adjustment. I suggest using "Activate profile Corrections" (profile tab) to fix the small amount of lens distortion.

  So always questions please post the image file on Dropbox or other filesharing site and I'll take a look. Thank you.

• Y570 fan does not work best after 2 years

  My Ideapad y570 is over 2 years old and large. The only problem that I've faced these last 6-8 months is when I start playing games and the laptop overheats and stops.

  The fan speed is set for an effective Heat Dissipation and this mode is perfect for keeping the freshness of the laptop. Lately, the temperature rises to more than 90 + and therefore the laptop stops. Since last week also the fan started making a few strange mechanical noises a gear stuck.

  I cleaned the fan to ensure that there is no dust in the Panel or the blades. Don't you think it's time for me to get a new fan?

  TIA!

  Assuming that your laptop is out of warranty I would recommend repadting the CPU and the GPU. It will also give you a chance to clean the radiators. I found two videos that could help you. Links below. Watch them first and then decide if you feel enough confidence to do it yourself. It's not rocket science, but there is always a risk of breaking something. Just take your time.

  www.YouTube.com/watch?v=7tE_i91q5vw

  www.YouTube.com/watch?v=3_zlTL_ywSQ

• cooling fan not working not properly - 90 b system fan

  I received a message on my phone saying HP cooling fan working properly and showing the system 90 b fan. She also advised me to go to hp.com.go/techcenter/startup to trouble shoot the problem. I tried pressing f10 but it does not work. How can I retrieve laptop? Thank you

  Hello

  Unfortunately, the cause more likey is a hardware failure which usually means getting the fan replaced.

  I suggest you get a can of compressed air and try to clean all the air vents, especially those around the fan as this can sometimes solve the problem.

  Kind regards

  DP - K

• Computer laptop fan does not properly

  I have a hp laptop g62-457dx and when I turn it on, it states the fan is not working properly, then stops after 15 seconds or continuous Windows if you press on enter.  I cleaned all the wind to blow air and get always the same message when I turn on.  How to open the unit and check/replace the fan myself?

  Hello Dragon58,

  I understand that you are having overheating problems with your laptop.

  Here is the guide service & maintenance for your computer. Go to page 77 and which will give you instructions on how to get to the fan.

  Let me know if you have any questions.

  Thank you

• Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected

  Hello

  I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

  Thanks in advance

  Hello

  Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

• HP envy 15-j104sl: display not working not properly

  Hello

  I have a Hp Envy 15-j104sl, unfortunately after a fall, the screen does not work properly: sometimes, the left part or the entire display turns white and it is impossible to use it unless I move the screen / hinges in another post.
  The glass is not broken, I think the problem may be in the base/hinges lower/some other type of contact works not very well.

  I am really disappointed with the online Hp support: I can't find location to send my laptop for repair, and I can't even call help if I have my warranty has expired.

  It's a bad display cable or possibly the display panel. It's going to not need a repair by a technician. Where do you live (country)? I'm not clear if you say your warranty is or has not expired?

• IdeaPad Y560p - fan does not start

  Hello people:

  I recently sent my knees lenovo repair due to a problem with the screen, but it is only the installation on the problem I have now. During the repair the motherboard has been replaced, since then, the fan does not seem to start then I suffered a little stop withdrawals on overheating. Please say if there is a way to configure the fan manually or... all I have to do.

  Thanks in advance.

  It has been plugged in, and somehow it works now even if I don't. And thanked all the you the mysterious man, really thanks!