Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

Remember - this is a public forum so never post private information such as numbers of mail or telephone!

Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

keimanzero,

Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

Secondly, I suggest that you run the File Checker system while in the same clean boot state.
To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
    If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
    sfc/scannow

When the analysis is complete, test to see if the problems facing the system have been resolved.

If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

Expert MowGreen Windows IT Pro - consumer safety

Tags: Windows

Similar Questions

  • I get a 0x80070424c error Code when I try to use the recommended settings for my Windows Firewall

    My PC suddenly stopped sharing music to my Xbox over the 3 days.

    My firewall is weird and it is said that "the Windows Firewall does not use recommended settings to help protect your computer.

    When I click to use the recommended settings, I get an 0x80070424c error Code. I tried following the steps here: http://support.microsoft.com/kb/968002 and it did not work

    Hello

    If you are having problems turning on Windows Firewall, follow these instructions:
    Download and install Windows Repair: '
    When repairing Windows opens, click the tab for Startup Repairs click Start. Clear all check boxes except for the following four:
    -Reset the registry permissions
    -Reset the permissions of files
    -WMI repair
    -Repair Windows Firewall
    Then click Start. Once it is finished, restart your computer.
    I hope this helps you.
    Brian
  • Get 0x800700B7 error code when you try to create a system restore point.

    Original title: could not create a system restore point.

    Running Windows Vista and trying to set system restore point in System Properties System Protection. Receive, "cannot... file already exests...» 0x800700B7. what I'm doing wrong or not done? Be nice... I am a Virgin computer! LOL PS - the laptop is a hand me down and contaminated by _:)

    Do not know what measures allowing you to create restore point.

    Here is the step by step:

    Start button > in the search box, type backup and Restore Center > press the Enter key > left column > click on create a Restore Point or change settings > wait > in the window system properties, put a stop to the OS (c :)) (System) > click the button create near the bottom right > the rest should be self-explanatory.)

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Why I get a 100 error code when I try to log in to start the download of the elements of the picture?

    Why I get a 100 error code when I try to log in to start the download of the elements of the picture?

    Adobe Download Troubleshooting Wizard

  • I have a new computer and have lost the dreamweaver program.  How can I find and redownload it?

    I have a new computer and have lost the dreamweaver program.  How can I find and redownload it?

    Download and Installation Help-

    https://helpx.Adobe.com/download-install.html

  • How can I find and replace the xml tags?

    Hi, I am using xml in my workflow and want to be able to remove some tags if they contained particular text.

    Here is an example of the xml struct...

    < Entry >

    < name > DEFAULT < / name >

    < such > default < / such >

    DEFAULT < address > < / address >

    < / Entry >

    I use this initial structure to define paragraph styles to follow when you import the xml data.

    This leaves DEFAULT in place everywhere where an entry is not any content of this field.

    I want to be able to import my XML and then run a script that deletes tags that include by DEFAULT, - I need to the xml tag to remove not only the text, if I do a normal find and replace will remove only the text not the tags that is causing problems with style. I also want to remove the end of para/return (^ p) that I placed at the end of the line. So it would be the same opening editor mode and removing content, tags + hard back in there, but I want to automate the process...

    So I think that's what I'm looking for in each case

    "< name > DEFAULT < / name > ^ p.

    and I want to replace it with nothing.

    Is this possible in a script (ideally javascript)?

    I have a little knowledge of javascript, but don't know how to search for and target this kind of string in indesign...

    using indesign cs5

    Thank you very much

    Hello

    Script should do it in two steps:

    1 find all occurrences of that is ' > by DEFAULT.<>

    2 delete the whole paragraph which is a found_text container.

    For example, in this way - JS - (a textFrame filled your text must be selected):

    var mStory = app.selection[0].parentStory;
    app.findTextPreferences =  null;
    app.findTextPreferences.findWhat = ">DEFAULT<";
    var myF = mStory.findText();
    var count = myF.length;
    while (count--)
         myF[count].paragraphs[0].remove();
    

    Rgds

  • The system restore points, how can be stored/kept?

    I had problems restore XP on the computer of a friend.  I can't after installing SP3, a question that will be asked in a separate post.

    In an effort to not having to do a full system recovery on the computer in question, with this latest attempt to recover the operating system and install all updates, I started the creation of restore points for the system after each step, I took to get things running and upward.

    And that is, after installing SP3, with installation fails and then going back until the restoration of the system to an earlier configuration, I found none of the points longer existed the system restore.   :-(

    Is there a maximum number of restore points in the system that can be stored in XP and later Windows operating systems?

    Hey, Jose,

    I'm sorry for the late reply to your post, but I removed the weekend baby a bad back that makes me mad.

    I'll try to put your comments in quotes, with my response immediately after, flea.

    The hard drive is 160 GB.  The car had 2 partitions, the recovery partition.  Before reinstalling everything from scratch, I've used Easeus Partition Manager Home Edition to create a 3rd partition to move the original data of C:\ drive to your new partition so my friend can sort files and keep it as he and his family want and discard the rest.  I just copy everything that I can, because I don't know who, what, and where they have stored files.  I actually found a file stored in the recovery partition, but I moved it.

    "Here are some reasons that XP will remove RPs.

    'http://support.microsoft.com/kb/301224 '.

    • Read the KB article.  To make sure that we are on the same page, I get "system drive" means C:\.
    • Lack of free space should not be a problem.  C:\ is 32 GB, 10.1 GB used.  D:\ is 111 GB, GB used 21.2.  E:\ is 5.98 GB, used 5.00.  E: is the recovery Partition.
    • No disk compression
    • Did not display the warnings system restore.
    • I do not turn off System Restore fo any player.
    • This isn't an upgrade of the system to an earlier version, I just turn on the computer the way it came, new out of the box.
    • The system was always restored from the recovery Partition.  I have a set of restore CD, but they have been written about the recorded side with a felt marker.  I have not tried cleaning off the coast, this will be my absolute last resort.   :-)
    • Disk cleanup does not give me tabs and options as mentioned in the article.  I guess that these show upward when you upgrade from a previous version of the operating system.
    • I don't think I'm under low disk space.    :-)
    • Does not not after the age of 90 days, nor have I have reduced the size of the data store.  I didn't know either of these possibilities before you read this KB.  See how the KB has been written, I suppose that these two parameters can be changed.  Can you point me in the right direction for how to do this?  I have a computer multiboot (XP Pro and Vista Ultimate Edition) and I would change the date of age never delete a restore point, because the computer is rarely used nowadays.

    "I don't know that when you install SP3 and it goes well, a single method to uninstall SP3 is to restore the system to the time before SP3 was installed:

    http://support.Microsoft.com/kb/950249

    This would mean that you would still RPs after that installation of SP3 (if things were favorably) and that was my observation. »

    • When I started to have problems, I simply started from scratch with a Destructive Restore process.  When I'm really frustrated after several failures, I started looking for a quicker way to get back to a point just before I installed SP3 and found this KB.  After that, it was the safe boot mode and using the Control Panel Add/Remove programs to remove the SP3.  And I got very, very familiar with the process!   Laughing out loud

    "Other things I can think can remove all restore Points are third party maintenance and system cleaning tools, poorly designed or introducing a third part malfunction anti malware tools, etc..".  Malicious software can disable the system restore (temporarily of course), but I never saw remove Restore Points.  The XP disk cleanup will also delete all but the most recent restore Point. »

    • Other Easeus Partition Manager, I never got far enough along to try any other third party software.  My "modus operandi" is updated completely OS and Internet Explorer before I install any other software and update it.  However, with the idea of the recovery Partition, do not not the software isn't an option.

    "If they are all absent, it always seems that a human element involved somewhere."

    • I learned long ago, the days of 8-bit, unless there is a real hardware failure, almost all computer problems can be tracked to a human being.
    • Not all system restore points were missing, just the first I created which is involved by creating a restore point after you change the system, such as the removal of my friend doesn't use software.  For example the software to connect to an ISP with a modem.  They got the DSL.   :-)
    • All deletions of software would help speed up the computer for his own use.  The rest of the family is like me today, Mac users.   :-)

    "To answer your question:

    The settings default for the accumulation of Restore Points is 12% of the size of the monitored hard drive or 90 days (both values are adjustable of course).  Microsoft seems to draw attention to the way in which the Restore Points "live."   "Then, the oldest Restore Points will start to get deleted to make room for new Restore Points (see also KB950249).

    • 12%, eh?  Is it possible, in fact, I have exceeded this number by 12% by creating too many restore points?  Knowing what I was doing, which seems to be a possiblity says, as restoring all points were never deleted, only the earlier.

    I'll certainly post the info you suggested in the post on the SP3 forum.

    "Do or do not. There is no test. »

    • "Luke, the force is with you." :-)
  • I get a 0xc18a0306 error code when I try to print anyone can tell me what it is please.

    I have a HP photosmart C8180 printer all in one and when I try to print all I get is an error 0xc18a0306 and he then told me to turn printer off then on again. Someone at - it ideas please.

    Hello

    Please see the link below for the problems on the issue.

    http://support.HP.com/us-en/document/c03081973

  • Why do I get 800736B 3 error code when you try to install service pack 1 through windows update in windows 7 64 bit?

    When windows update tries to install service pack 1, it fails with the error code 800736B 3. I am running Windows 7 professional 64-bit.

    I searched around these forums and others to find a solution and I'm afraid I'll have to re - install windows.

    So far I have tried:

    1. installation of the fix/update - Windows6 analysis tool. 1-KB947821-v10 - x 64

    2. I ran sfc/scannow in the administrator command prompt

    3 run the windows update utility for troubleshooting to solve all the problems

    4 remove all content from the C:\Windows\SoftwareDistribution; When I delete these files it redownloads the update, but on installation, you get about 65% of the way through and fails.

    5 disabled and re-enabled BITS

    6 downloaded the stand-alone manual update, installation failed the part of the way by

    Here is the reading for the Checksur.log

    =================================
    Preparation of control system was updated.
    Binary version 6.1.7601.21645
    Package Version 11.0
    2011-03-29 20:20

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages

    Control components store
    (f) CSI identity missing 0 x 00000000 wnetvsc.inf_31bf3856ad364e35_6.1.7600.16385_b3131d70e92cd346 appid
    (f) CSI identity missing 0 x 00000000 ws3cap.inf_31bf3856ad364e35_6.1.7600.16385_f2bcdebb5e0570d7 appid
    (f) CSI identity missing 0 x 00000000 wstorflt.inf_31bf3856ad364e35_6.1.7600.16385_1c88e04231fe3719 appid

    Summary:
    Seconds executed: 419
    Found 3 errors
    CSI identity lack Total count: 3
    Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

    Do a repair of Windows 7 installation and then install SP1.

    Windows 7 - repair facility
    http://www.SevenForums.com/tutorials/3413-repair-install.html

  • Getting a 0x800704b3 error Code when you try to access WIndows 7 machine from Windows 8 machine records

    I just bought a new all-in-one PC of Windows 8 at my local store from Microsoft and configure it to my client.  They have a Windows 7 Pro machine, which I connected to via homegroup.  I tried to access the actions of the Windows 8 machine as well as access to the C: drive on the Windows 7 machine.  For some reason, he sees the actions and invites you to me for a user name and password to connect to the machine.  I enter the correct credentials and it keeps kicking back this error code.  I need to access the computer Windows 7 Windows 8 machine, so any help would be greatly appreciated.

    Thanks for your answer in advance!

    -Eddie

    Hi Eddie,.

    Follow the links and check:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/win-764-ultimate-backup-restore-gives-this-error/542da2e6-CD36-4677-B194-fd5b409f81af

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/error-code-0x800704b3/2c4433fa-3eAd-4c8a-865e-c9ff72391c14

    http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/1aed9095-0495-4ef6-94aa-8e00067bec76

    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/55e914fc-7ff2-440A-9d14-13ccceeb756c

  • 0x8ac70013 error code when I try to use the Webcam in Messenger

    I have looked through the links and comments on this issue that others have had, but don't seem able to find my way to the solution.

    Help please?

    Others refer to patches involving MacAfee - and/or - Norton-and/or-VMWare, but I have none of these.

    Using Windows XP and AVG and Messenger 2009

    Your advice please?

    Best regards, Frank
    Frank Summers * address email is removed from the privacy *.

    Your question is part of Windows Live Solution Center.
    Please repost your question in Windows Live Solution Center, son of Messenger section:
    http://windowslivehelp.com/forums.aspx?ProductID=2 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • My laptop crashed. I have the disc (intact). How can I find and move the files to the Inbox (not local folders) of my three accounts to the new pop3 computer laptop?

    Old laptop had Thunderbird. The laptop no longer works, so I took the drive C (SATA drive) and and which plugged into a USB port.

    New laptop has installed Thunderbird local folders have been restored. The contents of the Inbox is missing (I use the option ' download server ", so the recent correspondence is here.)

    I have three POP3 accounts, so I will try to identify the location of three separate "inbox" and "Sent" folders and add them to the new facility.

    Where the files are stored, and what would be the easy way to get back them on the new laptop?

    It would be great if there is a more fluid way for disaster recovery.

    You could have copied the whole profile and do with it.
    To create backups, you should also back up the entire profile.

  • My volume (usually placed on the taskbar) icon has disappeared from the computer... I can use controls to adjust the volume, but I can't! How can I find and replace?

    I use a (*) DELL PC at the moment. Please help; I am learning to use my MacbookPro... but that's the main at this time!

    The solution that I listed above should apply as well to Windows 7.

    Right-click the taskbar
    Click on properties. In the Notification area
    Click Customize
    Check the Volume.
    Click on apply, Ok
  • Advised to make soft the system restore... can not find place to enter the date of the restoration

    Where can I find this day soft system restore restore

    Hello

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • 2230 error code when I try to uninstall my WD Smartware.

    I received the 2230 error code when I try to uninstall my WD Smartware. How do we uninstall it?

    Hello

    ·        Are you referring to Western Digital software Smartware backup or Western Digital hard disk partition?

    ·        You are able to uninstall other applications?

    ·        How do you try to uninstall Western Digital Smartware?

    So what is happening with this Western Digital Smartware software, you can follow this link where user had similar problem.

    http://community.wdc.com/T5/my-passport-for-PC/remove-the-VCD-from-my-drive/TD-p/7066

    You can also post your question in the Community of WD for assistance.

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Firefox and Yahoo toolbar

    It seems that I was hurry and needed an answer right away. I could get the toolbar, but the bookmarks section did not work. I thought it was Firefox but it's Yahoo. After that those suggested here, know me and others will have to wait on Yahoo to hav

  • How to make WMP 11 to read the .ts files?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: I want to play .ts files via WMP 11 on my XP & Vista platforms, but there seems to be a problem. It may lack the codec for these files? W

  • (Redirected) Worst Service

    I bought a Vostro 5560 six months ago, the laptop is still under warranty, my OS is crashed and I tried to get my laptop repaired by Dell of last 2 weeks with no result. After regular monitoring Dell sent a technician yesterday, who could not resolve

  • Downloading applications not in the windows store

    How can I download apps that are not available in the app store windows?

  • BDE 2.1.1 Fling Management server does not connect to vCenter

    I have the management server deployed in the environment, the plugin installed successfully and vCenter is connected to the administration via the Web interface of vCenter server. This problem occurs when I go to a data store or add it to a network.I