IdeaTabA2109A cover rear

Similar Questions

• Paper printer multifunction Dell C1765nfw color Jam error 077-901 cover rear

  My C1765nwf has an error code of 077-901. I had been printing on paper layer by using a custom setting and a piece is dislodged from the plain paper that he was double-sided taped to. I got the paperwork on the back of the printer, but the error still appears. I guess that there may be a small piece of something in there, making the sensor thinks it is still stuck. I'm almost certain I have every piece of outside, but obviously I can't have.

  I ran this test using a forum for a different Dell printer with the same error code ( http://en.community.dell.com/support-forums/peripherals/f/3528/t/19260009 ):

  ' 1. turn the printer off.
  2 press and hold the UP and DN keys while turning on the printer. the buttons can be released when the screen LCD indicates "diagnosis."
  3 LCD should indicate "Client Mode" and "ESS Diag" (or something similar).
  4. press on the arrow of DN to display "IOT Diag". Press the button ENTER.
  5 LCD should indicate "IOT Diag" and "Digital Input"; Press the button ENTER.
  6. press on TOP / DN buttons until the desired DI - xx is displayed, then press ENTER button to run the test.

  The test we want to execute is the Regi-sensor test - DI-3. Press the arrow upward until the LCD shows "DI - 3 OFF" then press enter. The LCD display should now show "DI - 3 L 0". If it says "DI - 3 H 0", there is indeed little the area regi-sensor paper jamming. »

  My results show:

  DI - 0 H 0

  DI - 2 H 0

  DI - 3 L 0

  DI - 4 L 0

  DI - 5: 0

  DI - 6 L 0

  DI - 7 L 0

  As the forum that I am referencing is on another printer, I don't know how to proceed. I have had this printer for about 4 months, when this happened, but I still had an old printer that I had used before that so I put just this side at a time. Unfortunately, I put her side for as long that the warranty is now expired, but I would really like to be able to use it again. I'm handy with tools and electronics, so I feel perfectly comfortable to try to fix it myself. I don't want to go tearing into it without any direction or knowing what I want even to. Does anyone have any tips for me to move forward? This who should I check/watch next?

  Hello NEITZKE,.

  Please understand that this is mainly a forum for user-to-user with Dell acting mainly as a moderator, post answers when we are able to. If you need real-time support please contact Dell technical support by telephone or chat.

  About your concern, the error code indicates a failure of the sensor input or debris stuck somewhere, try pressing and holding the AC button for about five seconds. Normally a blank sheet should be pulled thru forcing any debris. If the error persists, your best option is to replace the printer because it is the course of action that we would take if it was under warranty.

  Kind regards
  Joseph E

  #iworkfordell

• Question of unlock keyboard 9000 "BOLD" for blackBerry Smartphones

  Thanks for the help to upgrade my BB bold 9000 OS 5 - it worked!

  However...

  I used to be able to unlock my keyboard by pressing on * with the answer key of phone...

  and now he wants me to press mute on the top of the handset.

  is it unlock any way to program this return to the key sequence?  my unit has been passed to me at work and has a sleeve on that iSkin... which covers the button mute and is too thick to allow the "secret" to squeeze through it.  whenever I have to unlock it, I have to tear the iSkin to reach the button. (what's a sense?)

  I would take the iSkin, but my cover rear guard fall and the iSkin is the only thing holding it. (even once, provided work phone...)

  Thank you!

  Laura

  No, which cannot be reprogrammed. Removes the new OS unlock keypad you were used.

  If you press the Green dial key to enter the phone call log > Menu > Options > General Options > Homescreen composition set to NO, you should be able to use the K key to lock and unlock the keyboard of the device.

• Map of sims for blackBerry Smartphones

  How to remove the sims card aon a 9530?

  GSM SIM network map - remove cover rear of the storm, remove the battery and slide the GSM SIM (just below the edge at the bottom left of the battery. Use your fingernail or one I used an eraser for pencil push upward.

  Is this what you need?

• Dynamic objects in the disconnected model?

  Hello! I have a problem with the connection between smart objects and hope that someone can help me!
  A book-mock up I bought, contains a group of "Items" - layer - base, containing several dynamic objects.

  Those who are then used in different preview-layergroups (eg; before you book, inside the book, etc.)

  In this way, I can import/pages cover rear cover of my book-drawings and models in dynamic objects in the items-layer group, and then they are automatically changed in various layergroups. Or that's what's supposed to happen.

  However, somehow, a couple of smart objects was disconnected of the Basic smart objects, so rather than change all layers at once, I still spend several layers, one by one.
  Check the picture below

  In this way the dynamic object has lost part of its use... How to fix / reconnect the smart object?

  I got appriciate the feedback! Thank you!
  Ilse

  

  Try this (on a working copy, so you don't break anything, as if this works also depends on how the rest of the document is built)

  Click the object FLY Original layer, that you marked as a basic form of object and drag it to the new layer at the bottom of the palette icon.

  This will create a copy of the child of the dynamic object on a new layer

  Move this new layer of child in the same position that the layer with the broken link. Make this new layer visible and her broke the previous layer invisible by clicking on the symbols of 'the eye '.

  Dave

• Remove rear cover to find the drive hard hp pavilion 10 touchsmart laptop

  I have a Hp Pavilion Touchsmart Pc e010nr 10 (this is a mini) well it was thrown to the ground by my 2 years and when I went to turn it on, it says please install an operating system on your hard drive, then it allows me to go to diagnostics of material where it gives me a memory test option an option to check hard disk. When I selesct the memory check option it passes check memory and when I select the disc hard checkit nsays its not installed. So my question is how do I remove the back cover so I can make sure that the hard drive is secure? His portable regulars not like who r easy to remove the hard drive. Can someone help me please w one link or a video or instructions on how to remove the rear handle to check if my hard drive did not have kocked loose when it was launched? Thank you very much

  Hello

  Unfortunately, the HARD drive is not the best thing to do in your model in particular (you need to remove the top cover and the Assembly of the speaker), however the procedure is detailed from Page 52 of your maintenance & Service Guide.

  Kind regards

  DP - K

• Laptop HP 15-d051sa: rear screen cover replacement

  I've damaged the top rear cover of the screen on my laptop HP 15-d051sa. Is it possible to buy this part directly from HP or a Distributor? Thank you.

  Hey @pfmall76,.

  Welcome to the HP Forums!

  I see you are looking for a replacement screen cover for your laptop.

  You should be able to order the cover at HP in the HP part Surfer or several retailers online like Amazon, eBay, etc...

  The part numbers you are looking for are:

  ● Black 747108-001
  ● White 747109-001
  ● Red 747110-001
  ● Blue 750197-001
  ● Grey 747111-001
  ● Violet 750198-001

  You can also find the steps to replace the part in this guide, HP 15 Notebook PC - Maintenance and Service of Guide, on page 71.

  I hope that's what you're looking for!

• How to remove the rear cover to the hard drive.

  I own a laptop, a HP Pavilion dv6, System ID 3583, product ID LY076UA.

  When you turn on the laptop hard disk cover has no screws, it seems to be stuck in the chassis. What to do, take a knife and try to lift up?

  All the diagrams that I find slightly different models shows screwed on covers HD online.

  I also need to replace the fan, I would not mind a maintenance manual appropriate.

  Hello

  This is the HP Pavilion dv6 Maintenance & Service Guide. There's a latch of service you must release to access with the optical and hard drive. This is why there is no screws.

  

  

  Best regards

  ERICO

• Cover of ACER E1 - 572 Black G rear LCD PROBLEM

  Hello everyone.
  I have ACER E1 - 572G.
  On my laptop, I have broken black LCD back cover and could not find a specific.
  I found Black Back Cover LCD and LCD cover bezel for ACER E1-572. Guys tell me is it suitable for my laptop.

  The reference is:

• Removing rear cover Ideapad U410

  Hello

  I am tiring to remove the rear panel an ideapad u410, but I have no idea how to make to move after unscrewing it.

  Can anyone provide information or a tutorial about it?

  Thank you!

  Packrat salvation,

  U410 Service training video...

  http://Lenovo.f.relayware.com/content/CourseWarePublic/12769/player.html

  Please NOTE... opening Y410 Ultrabook yourself probably voids the warranty.

  Zehn

• Front mounted at the rear of the cover Panel

  Hi all

  I dropped my iphone two days back.

  Thanks to my phone armor lid and screen in tempered glass protector, the damage did not on the phone. Operations are working perfectly.

  However, I noticed that the hinge of the façade are popping out of the groves of the back metal only on the upper left of the phone.

  My phone is still under warranty.

  My question is the phone can be escalated to the apple authorized repair shops? Going to cost me something?

  Thank you

  Bhupendra

  Is the metal body bent at all (even a tiny shift)? Or bumpy? That would probably a lot.

• Windows Vista - no registration on its green cover (audio - rear) jack. PNP monitor generic w/speakers

  Problems for Windows Vista to locate the audio jack green on the back of the computer.  Sound card, speakers list black jack ATAPI, no list taken green device.  How can I get Windows Vista to recognize that I have the speakers plugged into the audio jack green in the back? I tested the cables and speakers, and they are fine.  In addition, speakers at the Panel Sound mix show levels of output, but not out for the media player or IE with playing sounds.  Have had this problem before with other machines (Sound Mixer playback output for speakers, but none of the programs) and has always been able to correct by activating the device with green plug.  Any help appreciated, thanks.

  Follow the steps mentioned in the article below

  http://www.Dummies.com/how-to/content/how-to-set-up-speakers-in-Windows-Vista.html

• I've got dust under my camera lens cover!

  So, as I said, I have a few dust particles under my rear camera lens cover (the small round glass piece located at the back of the phone, covering my cam). I think that's it through the microphone next to the camera, but I do not know how to remove it. Really annoying, so far I did not any impact on my pictures, perhaps, they got a little more blurry...

  I still have the warranty for my phone (iPhone 5 s btw), but I have a tiny crack loosed on my screen, just next to the home button, so I don't know if they will clean it free of charge in an Apple Store, we all know Apple... Any suggestions guys?

  Hi aimware.exe,

  Thank you for using communities of Apple Support. Certainly, I understand your concern with the dust particles and hairline crack for your screen. Looks like your phone will need to be examined to determine the best option for that to be resolved.

  Use this link to find the service options in your area.

  iPhone Service answer Center

  Have an amazing day!

• How is it difficult to replace the cover on a NB305-N410?

  Hi all - stupidly enough I opened my netbook on a small and lit the candle (!)  :-(.

  Now some of the back cover has melted and discolored, but the netbook seems to work very well.
  Can I order a new cover to without great expense, but how much work is it to replace?
  I can only find things on YouTube concerning the replacement of the screen and it looks complicated.

  I'll take it into a store to do the replacement, but they charge for 15 minutes.
  Is that what I could do myself or better not?

  Any info would be much appreciated.
  Thank you!!

  Miriam

  Yes, the replacement of the rear façade is delicate and difficult if you have no experience in disassembling laptop
  In addition there is no maintenance for download manuals if you don't have any instructions to do

  If you have someone who could do this work for you, then you should take this chance
  I think that it s not worth to risk a part of the damage only to save money that I spend a few dollars in order to have a good laptop.

• Remove the top of Satellite 1100 / keyboard cover

  Hi, I have a 100 satellite that I need to remove the top cover to get to the hard drive. I removed all the screws on the back and when I try to remove the lid seems stuck near the keyboard just above where is the mouse glidpath. Anyone has any idea how I would remove the cover completely to get hard disk?
  Thank you very much...

  Dear Neil

  Trust me on this device it's very complicated to do. If you want to remove the HARD drive, you should separate the top cover (after removing the keyboard).

  -In the bottom corner, there are 10 screws that must be removed.
  -When the keyboard is removed there are six screws which fix the top cover
  -Disconnect the touchpad
  -Lift the top cover by pulling gently upward from the rear corners and release locks on the front
  -If I remember correctly the HARD disk is fixed with a screw
  -After removing the screws, pull forward on the HARD drive to the connector on the system board

  If you are not familiar with the assembly/disassembly procedure please don t do it yourself.

  Sorry if my explanation is not accurate enough, but on this path, it is not easy to explain each step of manipulation.

  Good bye