IDL audio driver on my HP Pavilion Sleekbook laptop problem. Sound does not work

Hi, I have a HP pavilion Sleekbook 14-b029au and my sound does not work. I can't control the speakers of keyboard.

I clicked on the "speaker" icon on my computer and it says that "no audio devices are installed." I went and downloaded an IDL HD Audio CODEC file on the HP site, but when I tried to install it, it failed. Now, when I have the audio troubleshooting it is said that "IDL HD Audio CODEC has a driver problem" and "hardware changes are not detected.

Help!

Hello fm111,.

I would like that you can use the Recovery Manager and restore your drivers and software.  Follow the troubleshooting steps and then let me know if it helps to solve your sound problems.

Good luck!

Tags: Notebooks

Similar Questions

  • HP Pavilion laptop TS 15: HP Pavilion 15 laptop wireless TS does not work after update of Windows 10

    After the Windows Update the wireless doesn't work anymore.  No link found.  Wireless button remains orange.  I updated the drivers and uninstalled and reinstalled the drivers.  Nothing works.  I've seen a lot of relays since yesterday and tried them all.  None have worked yet.

    SOLVED!  I don't know how, but after the stop and the reopeing a few hours later, I again have a Wi - Fi connection.  I guess it was a combination of updated drivers and 10 Microsoft Update finish instalation in the background.  I thought that this was done when I posted, but when I stopped the last time it took a lot of time.  So I think he finished the instalation

  • HP pavilion dv9925nr sound does not work help please

    Hi I have a hp pavilion dv9925nr laptop and I spent in Windows XP pro and now the sound does not work and iv tried everything iv downloaded all the drivers on the internet and everyone simply goes on to say: no driver no has been supported in this package and its driving me crazy please can someone help before I just use it to target paratactic

    Hello:

    Then I recommend that you follow the instructions in the guide to the link I posted above.

    After you install the MS UAA driver, you may need to install the audio driver updated the posted on this link:

    Conexant High Definition SmartAudio 221 drivers (ModelC700, Vx5xx series and dvx5xx and ABOVE )

    Pilot modded by silver here

    Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
    Not to connect, install from a list or specific location,
    Select don't search, I will choose the driver to install.
    For the hardware Type select 'show all devices '.
    Remove control "Show compatible hardware" and click on 'disk '.
    Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
    Ignore XP when he complains, Reboot.

    If none of this works, try to reinstall XP and start from scratch. If you do not see your appliance an audio controller if you reinstall XP, then more than likely it is a hardware failure of the audio chip.

    Paul

  • Pavilion 15 p287sa: my bluetooth does not work on my laptop brand new

    I just got my laptop and bluetooth does not work. Not sure if it was working before the upgrade of windows 10 that I had not previously and update. The laptop says it's working, but is not picking up all devices and it does not appear on my devices. It is running and my devices are visible. Anyone has any ideas until I wearily towards PC World?

    Ta

    Kelly

    Hello:

    Here's the W10 realtek bluetooth driver for your laptop...

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_151716_1

  • My hp pavilion elite hpe-204f video does not work

    My hp pavilion elite hpe-204f video does not work so I replaced it with another video card that worked. After installing the card and start the system I saw the video on my monitor. Great! I need to replace my video card. No problem.

    Afer by purchasing and installing a new video card, I have no video. I put a new one in another computer. This works. I put the video card which worked yesterday... that did not work.

    Then, I put the original video card that I thought that did not work on another computer and Yes... it worked.

    Should I assume that I have a bad graphical location on the motherboard? If so, short of buying the same motherboard is there anything else I can do?

    Thank you very much for the research.

    Hello

    The integrated video processor still works when the video card is removed?  If Yes, then try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

    If the above is successful, then re - install the map graphic and clear the CMOS.

    Another thing to try:

    A good cable video know.

    A known good monitor.

  • Sound does not work. Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out.

    Original title: audio device problem
    just reinstalled windows xp.  Sound does not work.  Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out.  Microsoft Fix it, but the best I get is "do not set as default audio device.  The lack of sound recording does show a device.  Ideas?  BTW, I sometimes get static noises out of the speakers.

    Hello

    I suggest you to follow the steps from the link and check if it helps.

    No sound in Windows

    I hope this helps.

  • Driver CD on HP Pavilion g Series notebook PC does not

    My CD/DVD drive does not work. There is nothng when I insert a cd. I tried everything I know to do. I uninstalled and then restarted for the computer to reinstall, but nothing works. It gives me the error code 19 - it seems to be a registry problem, but I have been unable to resolve the issue.

    Any suggestions? And the next thing I will ask you, did I try the fixit tool? Yes, I did... Nothing works. Have no idea what to do at this point.

    Thanks for any help you can provide.

    Hello

    If it please you registry backup (copy also), then try the following methods:

    http://www.ehow.com/how_4693117_dvd-Device-Manager-error-codes.html

    Kind regards.

  • Pavilion dv6 sd card reader does not work after upgrade to windows 8

    Hello

    My card reader SD HP Pavilion dv6 does not work after windows 8 upgrade (6 months ago). Previously, it was working fine when I was with Win 7 (which is the default OS with this laptop).  I don't find the device in Device Manager (under the peripheral system or hard drives). Read the similar section in the HP forum, but it did not help as much as the device is missing in this case. Can anyone help?

    Hi SanSam.

    Thank you.

    Install the driver from Realtek for Windows 8 card reader.

    Please post your results.

    Best regards
    ERICO

  • Pavilion dv6 6165 tx: bluetooth does not work in window 8

    I've updated my OS to windows 7 for win 8. After you install later, its bluetooth does not work, although the drivers are properly installed and graphics do not work.

    Pls Guide

    Hello:

    What model of wireless network card your laptop there?

    If it has a Ralink the BT 3.0 wireless adapter radio won't work on W8.

    Here's the graphic drivers you need...

    This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp59850.exe

  • my sound does not work - IDT High Definition Audio CODEC - shows Code 10

    The sound did not work for about 6 mos

    I uninstalled and reinstalled the IDT High Definition Audio - and every time - there is an error on the re - install.

    Hello

    1. do you have service pack 3 installed on the computer?
    Update the drivers for your audio device should solve the problem.

    Method 1
    Update through Windows Update hardware device driver. To access Windows Update, see the Microsoft Web site at the following address:
    http://update.Microsoft.com

    Method 2
    You can also update the drivers of the provider's Web site. Follow the installation or update.
    See also the links below:

    How to fix sound problems in Windows XP?
    http://support.Microsoft.com/kb/307918

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:
    http://support.Microsoft.com/kb/943104

  • Pavilion g6: HP support assistant does not work

    Hello

    I use HP Pavilion 2301ax with windows installed on it 8.1 g6. I tried to run the hp support assistant, but he did not run.

    The program opens, but it remains empty. It shows nothing on it, only hp support assistant is written on the top.

    After that I closed the program, a message automatically "Hp support assistant does not work. Windows is to find a

    solution for it. "Then the message disappears. Well I look forward to the it.

    Hello

    You upgrade the machine to 8.1?  You need a newer version:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-135715-1

    Kind regards.

  • Pavilion DV6 6c14nr: Wireless button does not work

    Has taken the plung and improved my DV6 Win10 laptop to see how it works.  Had to do a clean install, because no upgrade would not work.

    After installation, the wireless button does not work.  LED stays red all the time, and when I push it, it activates / deactivates the airplane mode.

    Check the support site HP for this PC, downloaded and installed the driver wireless Win8 button (sp59835) and it does not work. Button LED stays red.

    Searched these forums and found another driver (sp64043) from the button for Win10 wireless driver and installed it.  Still does not work.

    Information on equipment is: ACPI\HPQ6001\2 & daba3ff & 0

    The details for the wireless button said drivers this devide requires additional installation

    Unless I can get the wireless button to work, I'll be forced to go back to Win7.

    Help, please.

    UPDATED - so others find this post know what works!

    Restored image backup Win7.

    Disconnected the LAN cable and activated the wireless button.

    Win7 removed and properly installed Win10.

    Wireless button works NOW!

    So basically, if the wireless is turned off before the Win10 install, it remains disabled and then nothing will allow it.

  • When I insert a CD, the drive shows activity by the flashing, but the CD does not work

    I can get it to display video files and clicking on them, get them to run, but I can't get the disk to run it as it is supposed to. If I put the drive in another machine, it wil open to a screen that shows the options to choose from, by clicking on an item will take place that point and, therefore, the entire disk can be explored. I had heard that Microsoft had removed the autorun installation and initially, guess that's the reason, but I've learned since Microsoft had allowed the installation to be replaced, and so had done through Microsoft, so I always use the autorun facility.

    Hello

    Do you mean that you can not use the AutoPlay feature?

    See the bottom of the article, which can be useful.
    The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive
    http://support.Microsoft.com/kb/330135

  • sound does not work. (no audio device)

    Hello, just the other day, I connected to my laptop and went to play a movie. I noticed that the sound was not working. I made is not on mute and not turned down all downstairs. I was looking on my control panel I clicked on the "speaker" icon and it says "no audio device." what must be the problem.

    I downloaded the 'fix it' program and there is nothing to remedy.

    the program got me right here.

    I spent hours trying to fix it, so I'm really at a loss.

    I thank you for reading and hopfully you can help.

    My Toshiba.

    It seems that the drivers for your sound card are not yet installed. To install the drivers, right click on the Multimedia Audio Controller , select to update the drivers... and follow the instructions on the screen. Tim Baets
    http://www.BM-productions.TK

  • Pavilion g7-1368dx "cooling fan does not work correctly.

    Greetings. I have a HP Pavilion g7-1368dx laptop with Windows 7 I bought in June 2012, is no longer under warranty.

    A few weeks ago he had a thermal cut-out once during use. After cooling, the laptop works very well for a few uses, but then it has started giving the boot warning message, "the system has detected that a cooling fan is not working properly," with an additional indication of the damage if the computer is used in this State.

    I ordered a new fan and succeeded him, and I cleaned the fan grille in the process (although it wasn't very dirty), but I still get the same fan error message. I went to the HP website and saw the suggestion to do a "hard reset", so I did it, but the problem persists.

    I saw another suggestion to try a BIOS update, but I thought that would not be desirable because the fan does not work. Suggest you go through with the attempt to update the BIOS anyway?

    Is there something else I can try before ordering a new card system?

    Thanks for your help.

    Dear customer,

    Welcome to the Support Forum HP and we are happy to help you

    Looks like you are having difficulties with regard to your laptop cooling fan
    We will surely help you with this

    According to the message that you have posted, I suspect that it is purely a matter of material where in your message 'System Fan(90B) - the system has detected that a cooling fan does not work properly' get. It is a mechanical failure and fan cooling of your laptop and must be replaced before the laptop starts with an overheating problem.

    Causes/reasons for this problem:

    1. sometimes, it's just because of the dust, animal pet hair slows down the fan

    Perform the illustrious below troubleshooting steps:

    Step 01. Turn off the laptop

    Step 02. Disconnect the power/AC adapter and also remove the battery too

    Step 03. Press and hold the power button of the laptop for a minute

    Step 04. Now re - insert the battery back in and plug again the power supply/adapter

    Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

    Step 06. Once you get the BIOS, please press F5 to load the default Installer for BIOS

    Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

    Step 08. Now please wait unit loads Windows and then stop the Netbook again

    Step 09. You need to clean all vents and openings that are really good with a can of compressed air

    Note: If you still get the same error, we need to replace the fan

    I highly recommend you Contact HP technical support immediately by phone to get help immediately to get your fan replaced and serviced by an authorized HP Certified Engineer Netbook

    Click on the link to check the status of warranty below
    http://tinyurl.com/6cf8qju

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you
    K N R K
    Although I am an employee of HP, I speak for myself and not for HP

Maybe you are looking for

  • Where do I see Personas?

    I can download Personas, but cannot see them. where the browser would be visible?

  • Option saver battery but with a brighter screen for 1050F?

    Is it possible to set up the Yoga 2 10 1050F so that the battery saver option can reduce unnecessary programs running in the background, BUT, at the same time... have a brigher screen? Who feels like watching a totally tarnished down/faded screen jus

  • Download the "Marvell 91xx Config ATA Device"

    We do not find a download for the 'Marvell 91xx Config ATA Device"I sent Marvell help and tried many listed sites, but simply to don't download. I'm so frustrarted as it has to do with a disk SATA 6 Gbps 3 I want to use RAID - 0-. so I can capture 10

  • problem loading windows xp

    good it will be long and stretched out, but I want to make sure that all the information is there so that people can give the best help and suggestions. Part 1: a week ago I had a series of really bad viral infections on my computer.  My virus progra

  • alarm with DSC on Vista record

    Hello I have a TT probblem with the alarm logging. I use Labview 8.6.1 module DSC on Windows Vista. The alarm configuration is correct. I also leave the original path to the database - C:\Program NIUninstaller Instruments\LabVIEW 8.5\data This issue