iDRAC 6 does no see the disk health (OS ESXi 5.1)

iDRAC 7 displays a nice with health information, but iDRAC storage TAB 6 only the disc inventory. Should not be a storage TAB 6 also so I can see the health of disk?

Bar2D2,

The reasoning for this is that the iDrac6 Initializes before the raid controller, so that no information is yet available for her.

The iDrac7 is now incorporated in the life cycle of the controller/USC so it is initialized at the same time.

Tags: Dell Servers

Similar Questions

  • I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen "select the driver to install."

    Device drivers for a Win 7 install on Ubuntu system

    Hello

    I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed.  I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not...  So, how do you get drivers for Windows can install (or y at - it another way to work around it)?

    Thank you!

    The bios on fail safe defaults options are?

    It will probably take the raid driver

  • laptop does not see the disk of works 9

    I have works 9 and I want to install it on my HP laptop with windows vista home premium as a the opp system.
    My laptop does not see the cd or one of its files... The packaging says it's compatible with windows vista.
    It works on my desktop which has windows xp system opp on him.

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

    For any problems with your computer, not reading CD, ask in the Forum Vista Hardware at the above address.

    See you soon. Mick Murphy - Microsoft partner

  • C200 M2 LFF does not see the disks in the start menu after installing ESXi

    So in front of me, I have a brand new C200 M2 LFF with a single E5606 processor, 20 GB of RAM and a controller LSI Megaraid 9260 - 4i and 4 drives of 1 TB SAS. I put the disks in a RAID 5 array, I created a 10 GB virtual disk and properly installed ESXi on it twice, with a second virtual disk to be used as a data store.

    However, I can't get the thing to boot. It isn't even an option. The only storage in the boot menu option corresponds to the DVD player. If I look at the mass storage controller configuration, in fact, 0 and 4 SATA ports are "not installed" and port 5 has the DVD player.

    I tried fiddling with the settings of the BIOS without a bit of luck. Currently, the integrated controller is enabled and the SATA mode is set on improved (which seems to be the default, and what is recommended with Megaraid cards). It is a bundle (UCSC-DBUN-C200-102 by delivery, which seems to be a number of separate reference only), so I didn't have to assemble whatever it is and I guess that all the cables are connected at the factory. I opened the server, and I can say that all the cables look connected.

    Any suggestions? Any help would be greatly appreciated. If I have to open a case with the TAC, that's good, but seeing as I can't actually install the operating system there must be something stupid miss me.

    Disable the onboard Controller. This is software raid ICH10R.

    Reset. Then in the fixed CIMC/BIOS boot order and pint at the LSI.

    For the most recent ESXi 5.0, go to VMWare and search for ' ESXi 5.0 cumulative 2.

    Sent by Cisco Support technique iPhone App

  • Converter does not see the disks in HP BL460c G6

    Hello

    I have a HP c3000 enclosure of blade with some blades BL460c G6 running Windows 2008 R2 which I would like to convert virtual machines.

    The problem is... in the settings page... among the 'data copy' tab... It does not show any source disks

    Can someone tell me please how to fix this?

    I am running the latest version of converter standalone (4.3)

    I've also attached a screenshot of the problem

    Thank you

    a guess:

    Try the conversion with UAC disabled. Maybe this prevents detect readers.

    Just to make sure, you use the local "Administrator" account or just a user with administrative rights?

    André

  • ESXi on HP BL460C to EVA SAN, Installer does not see the disk non - ESX(I) Although not

    We have a BL460C with qlogic (QMH2462), talk to an EVA 4400 SAN with LUNS = 1 presented for a boot disk and LUN = 2 for the data store.

    San switch is Silkier, if all the paths are visible.  We have installed ESX 3.5.0 u3 on this blade to the same LUN.  The goal is to support an environment entirely multichannel without interaction of zoning, so far all porous bones have been configured to work fine until we tried ESXi

    When we try to install ESXi 3.5.0 u3 for the same logical unit number, the installer décompacte, starts, appears to find the discs and stops with an error "device cannot find support to write... on the image for.

    Is there a driver/known compatibility issue with the ESXi installation program that prevents installation in a multi-channel environment?

    I don't think that ESXi supports booting from SAN.  This is perhaps where the fuse box is.

    You must use the local storage, or possibly a 1 GB (or more) USB stick to boot from.

    Jase McCarty

    http://www.jasemccarty.com

    Co-author of VMware ESX Essentials in the virtual data center

    (ISBN:1420070274) Auerbach

    Please consider awarding points if this post was helpful or appropriate

  • I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

    I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

    Can she be seen by disk utility (and which version of Mac OS X is)

  • While trying to install XP Pro on T60 he does not see the hard drive, but the fact of the laptop.

    Have a lenovo t60 disk opportunity was wiped out when trying to install XP Pro, I get message windows does not see the hard drive, but he sees the laptop.

    If its SATA you need SATA drivers to install. Since the XP CD doesn't have the SATA drivers on it

    Unless you disable the AHCI in the BIOS. Or their wake.

    Or get the SATA drivers. Check out them on diskette, press F6 during installation and then add them.

  • system does not see the hard drives as P6000 Windows 7 Pro 64-bit

    PC is a little more than a year. About 2 months after installation disk c crashed. Replaced HP drive.

    Customer said that she had problems starting and kept restarting. He ran chkdsk and hooked up to 36%

    Now the system does not see the drive, but he sees no RAM, etc.

    Anyone know what causes this?

    Can what information I give to help troubleshooting?

    Thank you!

    Hello:

    Try resetting the CMOS.

    If this does not work, I would say that the drive controller in the motherboard is dead.

    Clearing CMOS
  • After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

    Original title: Signature Collision?

    I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

    Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

    Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

    I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

    Can anyone help?
    Thank you
    Comatose13

    Hello Comatose13,

    There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

    http://support.Microsoft.com/kb/330140

    Bobby

  • I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

    I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

    Check that the drive appears in Device Manager.

    If so, go to disk management and assign a drive letter.

  • Version 38.0.1 does not see the passwords stored in previous versions

    Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, users do not even know what their password. This failure is a serious problem.

    Problem solved. Probably the file has been corrupted signons3.txt. I deleted the file, and the new passwords are kept. After this version of the software update and new version I've seen passwords, create a logins.json file and now everything is fine. On all other computers in the company such a problem does not arise.

  • Connected to but the Airport utility does not see the time capsules

    Hi, I have several time capsules.

    I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

    What now?

    Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

    Other than what Mac running what OS do you use?

    This modem you have and how is the installation of TC on the network.

  • Windows 8 does not see the hard drive on the Satellite A200

    Windows 8 does not see the hard drive on the A200.
    How to install it?

    S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
    The HARD drive is visible in the BIOS?

    Do you use the original disc from Microsoft of Windows 8?

  • Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

    Hello

    My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
    In our office, the computers are all equipped with Windows XP.

    When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
    I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

    I hope you understand what I mean.

    The man said that he had no this problem with non - OEM Windows Vista versions.
    He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
    He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

    Does anyone have an idea of the cause of this problem?

    > The man said that he had no this problem with non - OEM Windows Vista versions.
    > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

    That's nonsense for me
    The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
    There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

    Check this box:
    http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

    You will find information that a problem has to do with the new Windows Vista network map.
    Windows Vista uses a new Protocol (Link Layer Topology Discovery).
    LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
    But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

    But you can fix the problem by downloading and installing the layer topology discovery responder.
    Install it and your PC Windows XP will appear on the network map.

Maybe you are looking for

  • How to save the MacBook Pro Photo library

    I am eager to help a friend to back up its Photo library of his MacBook Pro on a USB key. The Mac will be erased once the process is complete. Can someone give me a step by step guide how to keep safe all the photos of his library is supported if she

  • Satellite A350: Error Messages at startup when start Toshiba Console

    We just bought a new A350. I installed Comodo during a Windows Update.Cannot complete installation of Comodo, but makes the update of Windows. We were initially three problems; 1 loses internet connectivity, but not LAN. This has been resolved by ins

  • Camera will not take pictures!

    My camera is not let me take pictures at all, when I press the capture button, it just says: ' picture failed. I think that it because of the retro camera app that I downloaded just before the 2.1 update. I can put the camera app retro as my default

  • VI running on an Instance of Application EXE computer remote?

    TestStand has the option to "Run VI on a remote computer" under LabVIEW Advanced Settings.  My understanding is that the VI is run under the 'Instance Application main"If no path of the project is provided. If the remote computer runs a LabVIEW execu

  • WiFi on "standby mode"

    I have wifi connection in my laptop, 1) in (my laptop ibm ThinkPad) built-in wifi) 2 d link dwa 125 usb wifi, I need, when I SLEEP my computer this wifi two are connected with the network and service network sharing are on, I m using windows xp