IDS 4215 date and time change after restart

Similar Questions

• Date and time changes when restart

  original title: set time and Date?

  The time zone is set correctly, but the date and time are incorrect. If I change the Date and time manually the next time I turn on my computer, it is up to the wrong details. How can I stop this happening?

  Return to the date and time

  Click on change of time zone.

  Check the box for the hour record,.

  Click on the section of time Internet,.

  Click on change settings.

  Click Refresh now

  After check the box to synchronize with an internet server, save.

  Also post what she says, it's the time server.

  And your area.

• Time changes after restart System

  original title: clock issues

  the date and time on my pc should be set every day because it does not, how can I fix

  Hi steve. INA,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If the previous step fails, then you need to check if the time changes system even in the system Bios after the computer restart.

  You will need to consult the computer manual to find out how to start the system Bios or contact the computer manufacturer.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Date and time change on startup Vista Home Premium.

  Whenever I start the date and time have been changed to January 1, 2007; 12:01. therefore I can't access a secure site.

  If you set the right time, then the next time you turn it back on it has revenir la-dessus a change changed to 2007, read this:

  You probably have a failed in your motherboard CMOS battery.

  It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

  They cost about $5 to replace.

  http://www.computerhope.com/issues/ch000239.htm

  How to replace the CMOS battery in the above link info.

  See you soon.

  Mick Murphy - Microsoft partner

• date and time change 3 years ago without getting

  my Vista computer and a processor amd has changed the time and date of 3 years ago and stops at day etc. I put manually the time to correct the problem. This happened 3 times and made by himself. I checked my time synchronization to update the time automatically, but why my computer change the time at this earlier time? If others have this problem could you help me with this problem. I use kaspersky lab 2010 IPSec as well. This problem does not occur whenever I start my computer, but it did this morning, and I ask if there is a problem of security. Thanks for any help you can get.

  Probable reason: you save the battery is "turned".
  Please it in your maintenance of reliable computer rooms of new battery shop.

  t-4-2

• my computer continues to change the date and time

  my computer continues to change the date and time even after I set it correctly. I am running windows 7 Professional. Thank you

  Hello

  ·         Since when are you facing this problem?

  ·         Did you the latest changes on the computer before this problem?

  Method 1:

   

   

  The date and time in the BIOS settings may be incorrect.

  Important: Change BIOS (Basic input output system) /(CMOS) complementary metal oxide semiconductor

  Settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can see this:

  
  Incorrect time is displayed on 64 bit versions of Windows 7 or Windows Server 2008 R2 after upgrading on-site

  http://support.Microsoft.com/kb/2001086

  Method 2:

   

  I suggest you replace the CMOS battery. If you are not comfortable with that, then I suggest you to contact the manufacturer for assistance.

• date and time to the 05/12/2013 times randomly changes

  After that I updated to El Capitan (it seems) on my iMac.  My date and time system randomly change the incorrect time and back to 05/12/2013.   I see nothing tripping in particular.  Just all of a sudden my browser does not open a page... etc.   I have open system preferences, click "date and time", click on the padlock to open, enter my password and it immediately changes back up to the exact date and the second that it is free time.  I can't reset it for me.  I tried to leave the bolt open, unchecking the checkbox "do this automatically" & leaving auto.  Can anyone offer any suggestions as to why and how to solve this problem, please?   Thank you

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  /Library/LaunchDaemons/com.lsreset.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• BlackBerry Z10 Date and time restarts everytime I restart the device

  Hi guys! Im a new user of blacberry and my new Z10 is my 1st blackberry phone ever, it is a great phone and the device, but actually im affected by some technjcal issues or is these issues are considered normal the BB function? Sorry guys because im an android user before and its my first time to experience those issues on my z10 bb:

  #1 date and time always resets everytime I turn on my phone from turning off or restarting simply, is this normal on bb z10?

  #2 im experiencing a low autonomy (as an Android device im and I got nothing like before), it is as I finished charging my phone around 7:45 and used it with wifi on, viber and downloading applications, then around 22:15 58% remaining just after 2 and a half hours, here it normal on the life of the battery of the z10?

  #3 I have a little find the setting to change the default message and call ring tone, wherin I checked on youtube how on the video is on the framework of the notification of the settings, but when I checked it on my bb it shows not on exactly where I see on the video. IM on bb 10.2 is the latest version? Hoping for you guys to help me out, thank you in advance!

  Setting, Date & time - set your time zone, Auto update time zone - on

  Battery life improves after a week or two, but will probably exceed never 12 hours with BT and WiFi continuously on, I load all night.

  Each Contact can have a distinctive ring, Notifications, Contacts > customize to Contact (bottom)

  Global ringtone, Notifications, requests > phone > Tone - select the tone or browse music.

• Date and time system continues to change each time the system starts.

  I noticed that the time and date of my home PC gets changed every time the system is booted. The default date is set for Jan. 2008, when in fact it should be July 2014.

  Also, my PC became slow death. I use Windows 7 on 1 GB of RAM, 250 GB PC. I used last my home PC 2 years back, but there has always been someone to use it.

  It shows the OS disk to 7 GB of free, when in fact I never installed or anything unnecessary stored on the disk of BONE; Whatever unnecessary programs were there, I uninstalled them recently, keeping just a few essential ones. After uninstalling, it shows to 7 GB of free, when in fact it should be more than that.

  I use Avast anti-virus, which I think is unnecessary, that its not to protect my PC and as other programs, too, is quite dead slow.

  The system is infected by viruses? Manually, I checked the system for viruses and clean the system of all unnecessary and, program files, but I'm still not sure whether it is a virus or a PC problem.

  I am a COMPUTER analyst, and's just done it 2 days that I use my PC at home. I could format my PC, or where applicable be buy Windows 8 with a new processor.

  Please advise.

  Thank you and best regards,

  Ralph Davidson.

  Hello

  You really need a minimum of at least 2GBs of RAM to run Windows 7 well enough.

  As you have only 1 GB of RAM, which seems to be one of the reasons why it is slow.

  Increase the physical RAM or try ReadyBoost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  Looks like you have some problems.

  Wrong Date/time

  If after you set the Date and time, and then stop and restart your machine and the time returns to the year 2008, and she did this whenever you reset, then restart the PC you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  ________________________________

  For hard disk space:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  And for general maintenance on your machine:

  You should have used Malwarebytes in previous advice here on hard drive

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary make mode safe mode with networking: AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• IPHONE 6 changes of date and time automatically to 2032

  Hi all

  I have 6 IPhone which was working fine but all of a sudden the date & time has changed & is showing as February 12, 2032. Due to which my calendar screwed up & none of the applications work as he gives certificate error. Currently it is running on IOS 9.1, but I tried the Update 9.2 but unable to which I think because of the wrong date. I tried manually change the date and the year after the scroll that is the * feature it goes until 2018 and then directly jumps to 1970, loan, I am unable to set manually also.

  Please help me on this point, I'm completely blocked

  Kind regards

  Khurrath

  Go to settings > general > language & region > calendar and set your Gregorian calendar. It's somehow gotten on Buddhist.

• Want 5660 - how to change the date and time

  During installation, I thought that I had chosen the date and time.  Not happened.  After that installation is completed how to make these changes?

  Hey @Americanpioneer,

  Welcome to the Forums of HP Support!

  I understand that you would like assistance setting the date and time on your HP ENVY 5660 e-all-in-one printer. I would like to help you today with these two settings properly.  Please follow the steps below to set up your date and time.

  1. With the printer on, use your finger to scroll to the left on the touch screen (such as a mobile phone) and you will see the installer
  2. Select Setup to access the Setup menu
  3. Then tap Preferences
  4. In preferences, you will see now Date & time
  5. Contact Date to change the date on your printer
  6. Affect the time to change the time on your printer

  Please let me know if these steps don't resolve your problem. Good luck!

• Date and time are incorrect after hibernation

  After that I end up hibernating my date and time are incorrect. Sometimes, the difference is that a question or a day or two, it is sometimes decades in error (2071 appeared a few days ago). Once it was a day behind, but all the others are coming in time. I'm on Windows 7 Service Pack 1 with the latest maintenance installed on 19 may 2013.  This error has occurred for about 2 months.

  It is possible that your battery needs to be replaced.

  http://pctechnotes.com/how-to-change-your-CMOS-battery/

• Why my computer date and time keep changing at 01/01/2008

  My friend has a computer problem.

  The date of his computer does not change since 01/01/2008, today's date. After the formatting as system, it is facing the same problem. He tried to change the date through the configuration of the BIOS. But after the reboot, the date is still helping 01/01/2008.Please. He got windows 7 ultimate SP1. Thank you for your patience for reading this.

  There is a battery on the motherboard that stores configuration information, including the date and time.  It seems that if this battery should be replaced.  Check motherboard of your friend or the system manual for more details - the battery is usually very inexpensive and easy to replace once found.

• Auto date and time for London is1 day and coming 7hours. How can I change?

  Auto date and time for London is1 day and coming 7hours. How can I change?

  Original title: Date and time

  Hi JoannaHerriott,

  I suggest you to see the following link on the pendulum to the point options Windows 8.1.

  Windows 8.1 and Windows RT 8.1 clock options
  http://Windows.Microsoft.com/en-us/Windows-8/clock

  Post us the results after trying the steps above.

• Can I change the date and time on my account?

  Is there anywhere on this site where I can set the details of the date and time?

  When I posted a recent issue, the date and time were incorrect IE not my country date & time.

  Thank you

  Sylvia

  PS Sorry if this is the wrong place to post this question, not that the possibilities of passage are really there?

  The date and time are universally on us Pacific time zone. You can't change it.