IE 8 is the browser used by control panel to connect to ms update firefox can be used instead?

Similar Questions

• Preview in the browser used to display multiple options

  When I started using muse there was a cascading list to choose among the options in the browser

  Now they're all gone and only a default browser is used

  they saw in the browser used to display the

  Internet

  9

  8

  7

  size of window options

  chrome

  Firefox

  Anyone suggest how these disappeared or how to get the lst to re - appear?

  An excerpt of the sizes are available for the provisions of the Tablet and phone. They are not available for the provisions of office you can always install different browsers on your pc and check how the site looks like.

  You may also want to check out this site, http://browsershots.org/

  - Abhishek Maurya

• DEP continues to kill the heart of Nvidia Control Panel

  The indication audio connection/disconnection of equipment is back and is not related to physical connections on the PC.  Noise interferes with other audio activity.  The D2IKTYPEhog is back at work. DEP continues to kill the heart of Nvidia Control Panel.  I feel that these three elements are somehow related as they seem to join the line of March.  First started to connect/disconnect and apparently ended when I tightened connections, then the DcomLaunch starts and went after the removal of some malicious programs, then DEP began acting in place soon to be joined by DcomLaunch and now connect/disconnect.
  Is there a connection here? Any ideas out there?
  Thank you

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 2:

  I also suggest you update graphics card drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 3:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate

  Method 2:

  Data Execution Prevention: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/data-execution-prevention-frequently-asked-questions

• Windows 7 backup works, but does not appear in the backup and restore control panel

  I have Windows 7 Pro and have had a running backup on a network drive for a couple of years now.  So far it has worked well.

  Recently, my wife asked me to postpone this off-peak hours and I went directly to the Task Scheduler and update annex it.  I also had to modify the scheduled task to wake up my laptop computer to perform the backup.
  Now, after making these changes, I can see the event log that the backup started at time exact (01:00) he succeeded 30 minutes later.  I can also see on my network drive that it saved at the right time and the registry keys indicate the location of the network right.  However, when I go in the backup and restore control panel, he told me to "backup Windows has not been setup" (which previously he would show me the network location and the last backup time and the other at the request of autonomy.)
  I know that backups are still viable can I do a restore to the correct network location and properly, it shows me that I have backups on this drive.  So, why the backup and restore screen is now showing me that no backup copy has been put up any ideas?
  I'm a little worried that this change to the schedule has whacked a key somewhere that is using the backup and restore screen and finally the backups will fail and I don't notice unless I am constantly reviewing the event logs (which, for domestic use, isn't it convenient for me).

  Tim,

  You can find this useful thread.

  Fake message "Windows backup has not been implemented":
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/d4b64dd2-CD98-4d51-97F2-1cc7865c6886

• It's been two months that I downloaded photoshop cs6 and it was fine, but now when I try to open the program, he said that I have to uninstall. When I go to the control panel and click on uninstall, so I can install it again, it just says: I need to clean

  It's been two months that I downloaded photoshop cs6 and it was fine, but now when I try to open the program, he said that I have to uninstall. When I go to the control panel and click on uninstall, so I can install it again, it just says: I need to clean my computer or restart, because it can not uninstall the program. I already did and it is still not uninstall. How should I proceed?

  run the cleaner, the use of the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  and then reinstall it.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Unable to choose Photos in the desktop and screensaver Control Panel

  I needed to do a clean install of my system and I had to manually copy the file the backup Photos in the pictures folder.

  Everything works fine on the Photos to... All the albums I created are there, etc., but within the desktop & screen saver control panel, I can not select the library, or Moments, Collections, years, etc., for the office or the screen saver.

  Does anyone have any suggestions?

  Have you fact your library the library system yet.

• I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

  How can I fix it so I can delete unwanted programs? I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

  Please press Crtl + Alt + Delete key on the keyboard. Now, you will get a new manager called tasks window.

  Now, please hold down the CTRL key on the keyboard and click file, new task on the Task Manager.  Now, you will get a new black window. Copy the following and paste it into the black command window and press ENTER. Restart the computer.

  Assoc .exe = exefile

  Assoc .lnk = lnkfile

• The disabled system administrator control panel display

  I installed Windows 2003 server edition and get the following message:

  The disabled system administrator control panel display

  I checked the registry and the DWORD value is set to 1 for all parameters as shown below:

  Screen saver - NoDispScrSavPage
  Desktop computer - NoDispBackgroundPage
  Themes - NoThemesTab
  Parameter - NoDispSettingsPage
  Appearance and themes - NoDispAppearance
  Display properties - NoDispCpl

  I have same game on another Windows Server with exactly the same configuration, but do not have this problem. Can someone help please

  I am logged on as administrator

  Hello
  The question you have posted is related to the server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/1355/threads

• touchpad doesn't work on my laptop. I can't find that everything about the touch pad in Control Panel. can you help me please?

  touchpad doesn't work on my laptop.   I can't find that everything about the touch pad in Control Panel.  can you help me please?

  Hello

  It's material is not a Windows problems.

  / Settings (BIOS/CMOS) often F2 as you start then look at the screen - make sure that is it
  is a toggle the TouchPad that it is enabled.

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary and the TouchPad makes its appearance in Device Manager: (make sure that you have restarted at least
  only once if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The parameters ' view by ' control panel of Windows 8 will not stick

  Hello

  I am running Windows 8 Pro N. When I open the control panel its default view is "category". If I change this to 'Small icons', farm on Control Panel and open it again, it's back to the "category" mode

  Is there a setting that needs to be set so that this preference stick?

  Thank you

  Andy Jackson

  I had the same problem. While that the 4 steps has not worked for me either, I found a solution quite similar as Ajacks which I believe will work on all platforms of Windows 8.

  When you open Control Panel, it opens in 'Category' default mode.
  If you look at the address bar, it will just say 'Control Panel'.
  But if you switch to "Small icons" or "Large icons", the address reads now "Panel > all Control Panel items.

  If you mouse over the words "All Control Panel items", it will highlight blue. You can then click and drag on the desktop to create a shortcut. When you click this shortcut, it should open up the control panel to display small or large icons, that you last closed (category view will not count!). In addition, you can right-click on this shortcut and pine in the Start Menu or add to Favorites to access practice. You can also change the name of "Control Panel" If you don't like the name of 'All Control Panel items' bulky.

  If you want the control panel to open in category view again then do the same thing, but this time select and drag the words "Control Panel" in the address bar and pin it Start or where ever you usually click to open the control panel.

  I hope that this solution makes it easy to one who reads this to match their preference!

• System cleaned after the attack of virus/malware using 6 recommended tools - 90% of the system is back to normal, but most of the options in the custom of open Control Panel!

  The system was attacked by a virus/spyware. Microsoft Security Essentials has been installed after that - it found nothing after a comprehensive analysis. Malwarebytes Anti-Malware has been installed, it is the largest part of it and removed. Norton 360 has found rest. SuperANTISpyware has also been installed and this has also nothing after a system scan. Then ATF Cleaner and CCleaner were used to finish with what anyone else remaining areas may be temporary.

  So right now the system is more or less fine - programs running, the internet works etc. However when I open the control panel and click on a bunch of things for example Security Center, Sound, customization etc - they open habit. You see that the cursor turns into the blue circle for a fraction of a second and then more nothing. No window opens and closes or whatever it is. Now, I assume that the pieces of the virus/spyware are still active but with all tools using the latest definitions not being not able to find anything like that, I wonder if it's just a case of something having disabled those elements and not them reactivated after cleaning. The reason why I don't think it's something malicious is also because some options such as the Windows Firewall, the Manager of devices and programs and features open and work properly. Any other malicious software would certainly avoid these access as they could help shorten.

  Please help, thanks!

  Hello

  References to Vista also apply to Windows 7.
  
  Make sure that system is really clean before doing this.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------------------------------------------------

  After the foregoing:

  What antivirus/antispyware/security products you have on your machine? Include everything you
  ever had including those that you uninstalled. (These can leave leftovers that can cause strange)
  questions.)

  Search all .cpl files most will be in "C:\Windows\System32" However, you can have
  others. Click on each of them at a time and see if it does not start - if so right click on it and
  Rename using cpZ as the extension is is to find it. Try Control Panel - if no Dungeon of joy
  try all the .cpl files. (Note that other people find other subfolders under C:\Windows should
  not be judged because they are not active.)

  Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and
  others.

  Icons do not appear in the Control Panel, or you cannot start Control Panel, the Welcome Center,
  or games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  The Control Panel window will not open in Windows Vista
  http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

  =====================================

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation.
  Be sure to do a good backup or three.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Check with your system manufacturer that they all slightly different methods. They may have
  included a recovery Partition or other methods to restore the default value. As the manufacturer of your system
  We will sell you the physical disks cheaply since you already own windows.

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Learn to draw with the mouse on Html 5 canvas inside the browser (using createJs).

  Hello world
  In Flash AS2/3, we can draw with the mouse in the browser (of course within the Flash Player). How can we do that in DC Flash Canvas using CreateJs (the result should be in canvas not in flash player). Something like this http://www.codicode.com/art/how_to_draw_on_a_html5_canvas_with_a_mouse.aspx
  Thanks in advance

  Here's the code if anyone is interested.

  form of var oldX, oldY, size, color;

  form is new createjs. Shape();

  stage.on ("stagemousemove", function (evt) {}

  If {(oldX)

  shape.graphics.beginStroke (color)

  .setStrokeStyle (size, "round")

  .moveTo (oldX, oldY)

  .lineTo (evt.stageX, evt.stageY);

  internship. Update();

  }

  oldX = evt.stageX;

  oldY = evt.stageY;

  internship. Update();

  })

  stage.on ("stagemouseup", function (event) {}

  color = createjs. Graphics.getRGB (50, 100, 150, 1);

  });

  stage.on ("stagemousedown", function (event) {}

  color = createjs. Graphics.getRGB (50, 100, 150, 1);

  size = 4;

  });

  stage.on ("stagemouseup", function (event) {}

  Color = "";

  });

  stage.addChild (shape);

  internship. Update();

• How to display the titles in the browser using Flex 3

  Hello

  How is it possible to have a name of the browser window title?

  Any ideas?

  Thanks in advnace.

  Hi Kiran,

  If you want to set the title only once in the application and if it stays the same for the rest of your app, you can simply put pageTitle = "Some Title" in your

  the main Application root tag...

  But if you want to change the title of your app frequently as you browse through different screens in your app... so you can put a public function who book the title that I posted in my previous code and call that work from different screens calling this public function using Application.application.setBrowserTitle (passmesage);

  Thank you

  Jean Claude Chari

• How to clear the cache of the browser using the Blackberry API

  Hello

  Can someone help me. How to clear the browser cache? Is it have any API?

  Hello

  There is no API to clear the browser cache, it must be done manually from the menu of Options of the browser application.

• I just installed the latest Mozilla. When I open the browser, a small box with HTML, etc. automatically opens. How can I disable this?

  I just installed the latest Mozilla. When I open the browser, a small box with HTML, etc. automatically opens. I don't don't need it or want it to happen whenever I open the browser. How can I disable this?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.