IEEE 1394 and W2K on my Tecra A3

Similar Questions

• IEEE 1394 and Pavilion Elite

  This is my first post.  I will soon buy a new pc, and reflected on the Pavilion Elite series.  I'm set to zero on the e9120t.  No where on the HP site doesn't specifically list if this model has or does not have an IEEE 1394 port.  No one knows for sure.  It is an option that I have.

  BTW - I tried the "chat with a sales consultant" option and it seems that the person is simply went for the same site, I was, replied that he had not this port and then give me a sales pitch on warranty, price, customer satisfaction, performance, etc.  There is no really inpsire self-confidence about the knowledge of the person.

  Thanks for your help

  OK, this motherboard has no 1394, sorry.

  See you soon,.

• Problem connecting my camcorder canon HV40 using the IEEE 1394 port.

  Windows Movie Maker (and other similar programs) will not recognize my camcorder. Mini-dv Canon HV40.

  I watched many forms and comments to try to solve this problem.

  Looks like I've tried everything.  When I uninstall the driver and restart my computer with the camera on playback mode, the device is found, takes me through the installation wizard and peripheral band AV/C, list host controller and about things but not the Canon camera.  The ToolTip that appears down right when the new hardware is found listed the specific Canon camera along the spirit the other stuff.

  On a random note, I uninstalled the IEEE 1394 and used the "Add Hardware" command to find the camera.  It worked once!  Grew up in windows movie maker and tried to download.  Along the way got a weird error 'photogalley' insert disk I have? Code of 1706.

  Never could make him again.  For only "device not detected.

  I get this error thing photogalley even when you do a scan.  If I hit Cancel enough that he leaves and the analysis was recorded.

  I'm just smart enough to be dangerous, but eager to get this resolved.  Any help most appreciated!

  I think that the way it should work if I turn my camcorder to play, the movie maker should take it from there.  Ouch who would be nice ~.

  Windows Movie Maker (and other similar programs) will not recognize my camcorder. Mini-dv Canon HV40.

  I watched many forms and comments to try to solve this problem.

  Looks like I've tried everything.  When I uninstall the driver and restart my computer with the camera on playback mode, the device is found, takes me through the installation wizard and peripheral band AV/C, list host controller and about things but not the Canon camera.  The ToolTip that appears down right when the new hardware is found listed the specific Canon camera along the spirit the other stuff.

  On a random note, I uninstalled the IEEE 1394 and used the "Add Hardware" command to find the camera.  It worked once!  Grew up in windows movie maker and tried to download.  Along the way got a weird error 'photogalley' insert disk I have? Code of 1706.

  Never could make him again.  For only "device not detected.

  I get this error thing photogalley even when you do a scan.  If I hit Cancel enough that he leaves and the analysis was recorded.

  I'm just smart enough to be dangerous, but eager to get this resolved.  Any help most appreciated!

  I think that the way it should work if I turn my camcorder to play, the movie maker should take it from there.  Ouch who would be nice ~.

  ==========================================
  Sorry... I have not * the * perfect solution. Looks like you're
  dealing with complex issues.

  However... I can offer a few links that may be useful.

  * Proceed at your own risk *.

  First of all, I would like to do a system restore to an hour before the start of this issue.

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Now... the following items may offer some useful ideas:

  Windows Vista-

  Import video from a videotape

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Windows Vista-

  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

  If the AutoPlay screen does not appear... What follows
  Articles may help:

  Windows Vista-
  How to change the auto run settings

  
  http://tinyurl.com/y8oneuy
  or...
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  And... maybe the following will propose a few ideas:

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Download video from your camera to your computer
  http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/DLmovies.mspx

  Windows Vista-
  Import analog video to your
  computer using a DV camera
  http://windowshelp.Microsoft.com/Windows/en-us/help/3ae62d5e-29e2-41eb-B326-9e42ac46b7021033.mspx

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• SP A10: XP SP2 and Maxtor IEEE 1394: need MS patch?

  I have a Satellite Pro A10, hooked up to an external Maxtor 80 GB of disc over a Firewire/IEEE 1394 link.

  IEEE 1394 is attached to a card PCMCIA (from Belkin) that uses the NEC 1394 chipset.

  A hotfix is available from Microsoft (see http://support.microsoft.com/default.aspx?scid=kb;en-us;885464) but the MS Support saying this can only come with the support of Toshiba.

  Can you help me get the fix?

  Without it, I can rarely access the drive.

  It works fine on my Tecra M2 that accesses the same disk through its integrated 1394 interface. The problem only occurs with the NEC 1394 chipsets.

  Hello

  Well, have you contacted Belkin support?
  In my opinion, you should ask manufacturers of PCMCIA cards for the upgrade or this hotfix. In addition, you can check the drivers Toshiba download page for this fix. Microsoft patches are known as QFE. Maybe you will find one that suits. But unfortunately, if you are not able to find it, you will have to wait for the next service pack for Windows XP which will include this fix. :(

  Good bye

• You will need to plug Sony IEEE 1394 camcorder to an iMac. It would connect to the thunderbolt via an adapter port? I have a cable of firewire 800 and wanting to know how to get the video of my iMac. Thanks for any help you can give :)

  I borrowed a camcorder tape Sony that has an IEEE 1394 (ilink Sony) and eager to download video from my iMac.

  It would connect to the thunderbolt via an adapter port?

  I have a cable of firewire 800 and wanting to know how to get the video from my iMac via this cable.

  Appreciate any help you can give :)

  You want a Thunderbolt Apple FireWire adapter. Here is a link (to the US store):

  http://www.Apple.com/shop/product/MD464LL/A/Apple-Thunderbolt-to-FireWire-ADAPTE r? FNODE = 8 b & fs = f % 3Dadapter % 26fh %3 D 4595% 252B45b0

  Sorry, I don't know what software you need to play your video, once you get the cable work.

• Firewire IEEE 1394 - lost installation Pulg-and - Play

  I have two firewire devices. A DV video camera and a 1 TB hard drive. Since the installation of the hard disk, I lost two of my Firewire IEEE 1394 connections.

  I tried:

  1 switch the DV camera and the hard drive, but the system does not detect the connection.

  2. I visited the Device Manager and checked the unit is activated and working properly.
  3. I'm sure the device driver is fully up-to-date.

  I have a Firewire connection on the front and the back of my PC, and both do not work.

  I am currently using my hard drive of 1 TB via a USB 2 port.

  Can anyone help

  See you soon

  Graham

  Hi Graham EF G,.

  To check the State current, the DV camera and the external hard drive not detected? The external hard drive has worked successfully before? Please also relay if there are error messages when you try to access the external drive.

  If devices are detected not below are some steps to solve the problem:

  You can check that both devices are compatible with Windows Vista by visiting the Windows Vista Compatibility Center, which includes a list of drivers, hardware and applications that are compatible with Windows Vista.

  For reference, the link to the Windows Vista Compatibility Center is included below:

  http://www.Microsoft.com/Windows/compatibility/

  Then, if the external hard drive is not detected in Device Manager, please check if the external drive is detected in the management of the computer:

  You can check this by going to: start then click on computer

  When it is connected and switched on, the drive should appear as a drive letter on the computer (ie: drive E:, F: or another letter.) An Autorun window may also appear if the drive is detected.

  If the external drive does not appear, please check the following:

  ·         Check the power supply and check if it works normally.

  ·         Check the wiring and confirm that your USB/Firewire cable is plugged into a port. You can also try a different USB or Firewire port.

  ·         Check disk management to see if the drive is detected it:

  1. right click on computer, select manage, select disk management.

  2. check the upper and lower windows to find if the drive is detected.

  If the external hard drive is not detected, try to connect the external drive to another PC to check if the unit is working normally.

  Then please check if Windows Vista Service Pack 1 is installed currently.  If WVSP1 is not installed, you can try to install this service pack and check if the problem still persists.

  For reference, the link below contains information. about how to obtain the latest Windows Vista service pack:

  http://support.Microsoft.com/kb/935791/

  If the problem is not resolved after the above steps, please see the link which includes a fix for the problem of an IEEE 1394 being more available device.

  http://support.Microsoft.com/kb/930495

  The relay please status after the above steps so that we will offer any additional assistance.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Want to know different speed USB and IEEE 1394

  Recently, I downloaded my photos on an external hard drive, Toshiba. The first backup took 6 hours. I have always heard that a fire wire is faster. Is it useful to make a fire wire to perform this operation? I use a HP Pavilion m9040n with windows 7. I have an IEEE 1394 port in the front and the back of the computer. What rates are associated with a USB port and a cable fire? Thank you

  Since you have a HP Pavilion m9040n - I guess that's when even USB2 you have there.

  You can find a detailed comparison between USB2 and Firewire 1394 here: http://www.qimaging.com/support/pdfs/firewire_usb_technote.pdf

  There is not only a large part of the differences imho. I tested both and in my case usb2 was a little faster.

  Much has changed since the introduction of the USB3, but unfortunately it is not available on your PC.

  I hope this helps.

• I have a Pavilion p7 - 1067c and need to install an IEEE 1394 controller, but there is no PCI slot.

  I need an IEEE 1394 port for capture video from my camcorder.  It doesn't seem to be the standard white connector on the motherboard to install a card.  There are a couple of black connectors line up with the empty card slot but not the white connector found on other computers.  I am familiar with the Texas Instruments OHCI IEEE 1394 Host Controller PCI compiant.  Is there something different for this HP?  I would be grateful for any help you can give me on this.

  Hello

  Short black expansion slots are PCI Express x 1 ports so that you will need a firewire card with this type of connection - an example of this can be seen here.

  Kind regards

  DP - K

• P30: External hard drive is not detected when you use IEEE 1394 cable

  My P30 not / can not detect my newly acquired Western informed extreme Digitak Drive 320 when I connect via the firewire port. I use a 4-pin cable (which costs a fortune, by the way) who is supposed to be a way to connect this drive to a 6-pin pc.

  My ieee 1394 driver seems to be called 'VIA OHCI Compliant IEEE 1394 host controller".

  Can someone tell me what to do? I really need to connect the FireWire drive because I need the USBs for other devices.

  Thank you!

  Hi, Lars

  It is really strange. I use the external DVD drive (DL) using the same cable. I tested it with several units (old Satellite 1900, Tecra M1 and also new Qosmio G20) and everything works perfectly.

  Check the power supply to the external HARD drive.

• Satellite Pro M30 in IEEE 1394 error

  Hello...
  I think I have a problem whit the IEEE 1394 driver

  I can't find the drive to any party, and the cd of drivers do not have this driver, I don't know how to solve, and the re-installation of the S.O. do not solve me the problem...

  Anu thing?

  Tank is a lot

  Hello

  you have runing OS OEM Toshiba (Toshiba Recovery CD) or you install a clean OS (XP full version)?

  It would also be good to know if the IEEE 1394 port has worked in the past or if necessary directly after purchasing the laptop?

  Have you checked the IEEE 1394 entry in the Device Manager? Try to reinstall the driver (I think this is a standard windows driver)!

  Sammy Bye

• Qosmio G30: Cam Sony MV does not work with port IEEE 1394

  Qosmio G30-117 does not support my Sony DCR-IP5E (a micro video camera) port ieee 1394. I tried to use pinnaccle studio 9 and video ulead studio 10, but I could not see my cam because of these programs.

  There is no problem if I install a new win xp media center edition (retail pack) and CDTOOLS drivers. But I want to use my setup of the Qosmio factory, I don't want to buy a new win xp media center edition.

  How can I solve this problem?

  Thank you all.

  Hello Amon

  I tested it with Qosmio G20 and my Sony camcorder using the same port.
  I tested it with Windows movie maker, WinDVD Creator, Adobe Premiere and Ulead Media studio Pro 8.

  You may believe, but each application was able to see my cam and I copied movies on the HARD drive, edited and created DVDs. I don't really know what is happening in your case, but when you connect your switch cam on game mode, and the cam must be recognized as new hardware and listed in Device Manager.

  When it works well to start the applications and check again.

• How to connect a camera Digital Video through IEEE 1394 on my A50 port?

  Hello
  I tried to connect a video camera to my laptop SA50-109 through port IEEE 1394... but the laptop doesn't recognize any camera...
  Although the shows 'DV-in' camera when I plug the cable witch is DV (4-pin to 4-pin) cable...
  is there something I need to do before to make it work?
  any ideas... Please?

  Hi Isabelle,.

  I think that the normal login procedure is: -.

  1. connect the firewire cable to the camcorder.

  2. connect the other end to the laptop.

  3. turn on the camcorder (in play rather than camera mode).

  4. Windows will detect the camcorder and will make available as input source for your capture software.

  HTH

• Question about satellite for MAC via IEEE 1394 connection

  Hello

  I have a laptop Equium I have connected to a box of OS x via Firewire to transfer files and use the functionality of the Macintosh to share Internet via IEEE 1394. Someone can tell me why, when I plug the Firewire cable, WinXP detects a new device that doesn't have a driver for the laptop?

  The Firewire device is already installed and seems to be working properly before plugging in the cable.
  Thank you!

  Hello

  Sorry, but I have never tried to connect a Mac with a Windows unit.
  As I know the Mac operation use another file as units of Windows mode.

  Usually, the best way is to use a LAN cable and not a firewire cable to connect the two computers. Firwwire does not support the IP or / and TCP protocols.
  In this case I don't know how the conection it works without all the protocols.
  However try to connect the devices via a LAN cable.

  Please also see this page:
  http://developer.Apple.com/

• IEEE 1394 USB on the macbook Air

  Hi, I tried to transfer my videos from my Canon ZR960 to my MacBook air with a Firewire (IEEE 1394) port for USB cable, but it doesn't work, my mac will not read the camera and won't be on side windows on the BootCamp partition. How can I fix, how can I transfer the videos (on mini cassette) to my MacBook Air?

  It is greatly appreciated.

  MacBook Air (2014)

  OS X 10.11.3

  Canon ZR960

  Mini DV

  IEEE 1394 (firewire) to a USB cable

  Hi luis098765,

  I see that you have problems when you try to import MiniDV video from your camera to your MacBook Air. I see that you try to use a USB FireWire-cable to achieve this. I would suggest that you use a FireWire adapter rather Thunderbolt as a USB connection does not allow you to import the tape media in your computer. More information can be found in the following articles:

  Final Cut Pro x: import of the cameras tape

  https://support.Apple.com/kb/PH12743

  If iMovie doesn't recognize or control your camera or camcorder - Apple Support

  https://support.Apple.com/en-us/HT204537

  Thank you for coming to Apple Support communities!

• Satellite M70 (PSM71E) Firewire / IEEE 1394 Device number

  I recently bought an Iomega eGo 250 GB Portable Hard Drive with USB 2.0 connections and Firewire 400.

  The Firewire port on the drive's type 6 pins. My Satellite M70 notebook computer has a Firewire 4 socket pins on the left side. I have an external power supply for the reader of the eGo. When I connect it to my laptop using a cable Firewire 4 pin 6 pin is not recognized. Nothing happens at all. I tried to disable the IEEE 1394 network adapter and reboot of Windows XP Home Edition with no luck. This drive connects and works very well using the USB cable, but I prefer using Firewire. The reader connects and works very well using the Firewire cable 6-pin 6-pin on my PC at home.

  Is there something I need to do to make the drive work using the Firewire port? I have no other Firewire devices to test the port with.

  Any help would be appreciated!

  Maybe the cable is defective? Is it the cable supplied with the HARD drive or did you buy it separately?

  You can buy more 6-pin to 4-pin adapter online. Google "firewire 6-pin to 4-pin adapter.