ieframe error when you try to connect to yahoo canasta.
Original title: error ieframe
Tuesday night, I played canasta to yahoo. I was not able to connect and play since then. I get the following error... Please help! RES://ieframe.dll/acr_error.htm#Yahoo.com, http://games.yahoo.com/games/login2?page=ca&ss=1
I went to the microsoft website. I had already cleared cache etc. etc. I have RESET Internet explore and that got rid of the ieframe error. Then, I was able to get into yahoo but could not go to a room. Then, I uninstalled java and reinstalled. I was then able to go to a room but not to make a table. I checked the "add ons" and made sure to activate all the java. I am now able to play canasta to yahoo. I think that yahoo reset things because others spoke it as and when you try to connect... the screen where you must copy the letters and numbers you see... the page is HUGE and I have to zoom to 75% to get to the screen where I have to watch. Even this screen I had to make smaller... so I have a few questions to understand. Thank you for having responded so.
Hello
1. do you use the Internet Explorer browser to connect to the mentioned Web site?
2. If so, what is the version of Internet Explorer?
3. can you play a different game on the website or other sites?
Method 1: Follow the link below:
The problems of games online using Internet Explorer
http://support.Microsoft.com/kb/2528246
Method 2: please follow the link below:
Internet Explorer is slow? 5 things to try:
Tags: Windows
Similar Questions
-
I get this error when you try to connect to yahoo mail
"The browser you're using refuses to sign in. (cookies rejected).
I studied the help files and done everything I could find to make the cookies allowed on the yahoo mail site and almost all the other sites I use frequently. Little hair pulling, I left trying to get into my email! Help, please? Going nuts about it.
I guess you've seen this general help article: Web sites say cookies are blocked - pledge.
Do you use any security or privacy software outside of Firefox which could be stripping cookies?
-
I get an error when you try to connect to my world because of verizon replacement phones
Hello!
Your request should be sent as follows. Go to this address:
and complete the form. Use, in the "Please select a component:"on the ground, AppWorld billing/payment selection. " Any other setting routera simply anonymously you on these public forums. Don't forget to also include the reason why you have exceeded your maximum eligible PIN associations to AppWorld (for example, several RMA, warranty replacement, etc..). If you do not have an "order number" for that field, just use whatever it is (for example, '123456').
If the shape responds by telling you that your PIN is not valid, please report this fact back here also there is a path separate resolution for this problem.
If this does not work, then please come back on these forums (http://supportforums.blackberry.com/rim/) and create an account so that we can provide direct assistance.
See you soon!
-
error when you try to connect to the internet via a modem usb - 6 error: the handle is invalid
error 6: the handle is invalid - I see this error message when you try to connect to internet via usb modem
I'm using windows Vista Home Basic and attempts to connect to the internet via a usb Huawei modem.
but when connect this device on windows xp pro his works very well.
but with vista I see this error msg
The handle is invalid
any idea to solve this problem?
Thank youYou can get in trouble with your device drivers, firmware and/or software. Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears. Check each device to a red x, yellow! or white? These identify devices with problems probably (drivers, but also of conflict or something else). Click on each for more details and troubleshooting tips. If you need to get the drivers (and you shouldat least make the modem and everything you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates). In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm. Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.
Try to uninstall and then reinstall the modem again. Remove the modem through Control Panel > phones and Modems, then uninstall the modem in Device Manager. Once the reboot is complete and it is reinstalled it should work (as long as you use the update of the above paragraph). Make sure that you uninstall in this order.
Are you sure that the modem is compatible with Vista and the rest of your system? What is the manufacturer, brand and model? You can find here:http://www.microsoft.com/windows/compatibility/windows-vista/.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Kept getting error when you try to connect to Windows Live Mail
When I sign in windows live mail, I get this message... There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service. When I try to add an event or a calendar on windows live mail, it won't sync my hotmail calendar. Can someone tell me how to solve this problem.
I had this happen to me last week and never knew why. What also happened in my region of the Eastern United States, is that I could not get into these forums either. It might be possible that Microsoft is the maintenance or upgrading their servers in your area. My problems resolved themselves after 10-12 hours or more and it led me to the 'edge of madness' trying to solve this problem, while it was happening.
-
Error 1003: I get this error code when I try to connect to a Web site. I have revived the iPad and was able to do, however, when I left the game I got error 1003. I tried to reconnect and automatically received this error message. This happens with all browsers on my iPad. I deleted the cookies, cache, etc, it may not always connect. Help, please.
You can try this by using a different connection? If possible cell or another location of WiFi?
If it goes with several browsers - it's probably your network
-
RAS error when you try to connect to the connection broadband cricket how can I solve this
error message
Hi r stars.
To focus in the right direction, we need the following information:
(a) what is you receive the exact error message?
(b) if it works well before?
(c) edition of windows vista you run on the computer?
Please provide more details about the issue you are experiencing for understand us to better the issue and help you solve this problem.
Please see the link below
List of Error Codes may appear when you try to establish a dial-up connection or a VPN connection in Windows Vista
http://support.Microsoft.com/kb/923944
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hello
I was able to connect ok in a shared folder on my laptop VISTA from my XP desktop computer.
but when I try the other way around (to connect to a shared drive on my desktop XP FROM my VISTA laptop), I get the following error message:"The mapped network drive could not be created because the following error occurred: not enough server storage is available to process this command."
Desktop is HP Pavilion a1410n
Windows XP SP3 Home Professional 3 GB RAM
Laptop is HP dv5z
Windows Vista Edition Home Premium SP2 4 GB RAMI would like suggestions.
Thank you very much.Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Steve,
Thanks a lot for the link to this article.
It was most helpful.I also found this forum useful post:
http://www.techsupportforum.com/Networking-Forum/networking-support/114373-cant-map-new-network-drive.htmlIn particular, he said to check the event log of the computer that you are trying to connect to (the remote computer) to search for an event ID 2011, which would be entered in the time you finally tried to connect and does not.
I did alt-click on the icon MY COMPUTER (from the remote computer) and the menu HANDLE, click the EVENT VIEWER folder (in the left pane), and then the SYSTEM folder under that.
On the right pane, I found an ad for the event ID 2011 at the time wherever I finally tried to connect.To test this, I went to the VISTA laptop and tried to connect the computer to Office XP again, which gives a different error message on the VISTA laptop.
When I went back on the XP desktop I tried to connect to and looked again to the event log, of course ANOTHER event ID 2011 has been registered with the new time of my additional attempt to connect.He confirmed that it was likely that the IRPStackSize was the problem, as your proposed article.
Then I printed article how DO TO SAVE AND RESTORE the REGISTER to: http://support.microsoft.com/kb/322756/
then backed up the registry (both by running a restore system to register and by exporting from the top level of the regedit).I then went in regedit on the desktop in XP for the
HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\LANMANSERVER\Parameters file described in your article.
There was NOT an entry for IRPStackSize in the right pane, so I followed the instructions in the add - it and change it to decimal 15.
I rebooted and tried to connect but still got the same error.
The article said that the default value is 15, so I assumed that adding input IRPStackSize to 15 has not changed anything.So I went into regedit and changed the value of IRPStackSize of 15 to 18, restarted and it solved the problem.
I found that the following articles is also useful in the resolution of this problem (aside from the one you gave):
http://support.Microsoft.com/kb/285089
http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/r0803/10r03/10r03.asp
I typed this all this while this might help others who may encounter this same
Error "not enough server storage is available to process this command" when you try to
Map a network drive (or just try to connect) to a XP computer from another computer.Thanks much for the lead.
-
"Gateway router not found" error when you try to connect the TiVO DVR with DLink router.
Original title: gateway router not found
try to connect the tivo series 2 to the internet with dlink router that he used to work with previous tivo but not with tivo now, it says gateway router not found
However, my laptop works fine with the router, I tried tivo support nothing helps, too, if I use the phone line works of tivo, but do not store a lot and is running out of room so it will not work fo rme, helllpppppppp thanksHello
Where exactly you get this error message?
See the troubleshooting suggested in "Network error message N07 or C107" steps from this link.
If you try to connect the tivo series 2 to the internet with dlink router then check out the link below:
http://support.TiVo.com/app/answers/detail/A_ID/400
Please contact the manufacturer.
-
The FTP folder error when you try to connect to a folder on my Web server
When I try to connect to a folder on my server using Windows Explorer, I get the following message...
"Windows cannot access this folder. Make sure that you typed the filename correctly and that you are authorized to access the folder.
Details:
A connection with the server could not be established.In the knowledge base, kb/260156 says it's because of me having reserved characters. However, my password has no reserved characters.
Can anyone help with this?
Graham
Hello
I suggest you according to the question in this forum and check if that helps:http://social.technet.Microsoft.com/forums/en/winservergen/
It will be useful.
-
Im trying to connect to my own acc on my computer, but it says 'the user profile service failed the lied/user cannot load profile' im using an accout comments I had set up for my sister and that I keep reciving a message saying that Windows Explorer as stoped working so I can't open any doc.music. pictures or whatever it is im in internet using foxfire that I installed it on another acc please help I don't know how to connect to m trying to connect to my own acc on my computer, but it says 'the user profile service failed the lied/user cannot load profile' im using an accout comments I had set up for my sister and that I keep reciving one message saying that stoped working so I can't open Windows Explorer all doc.music. pictures or whatever it is im in internet using foxfire that I installed it on another acc please help I don't know how to connect to my admin accmy admin acc
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
Error when you try to connect to create a new repository connection
Hello
When I try to create a new repository connection in a ODI 11 g, I get the following error:
java.lang.NullPointerException
at oracle.odi.ui.gallery.CreateNewOdiMasterWizard.invoke(CreateNewOdiMasterWizard.java:51)
at oracle.ide.wizard.WizardManager.invokeWizard(WizardManager.java:372)
to oracle.ide.wizard.WizardManager$ 1.run(WizardManager.java:420)
to oracle.ide.util.IdeUtil$ 3.run(IdeUtil.java:1089)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
to java.awt.EventQueue.access$ 000 (EventQueue.java:85)
in java.awt.EventQueue$ 1.run(EventQueue.java:603)
in java.awt.EventQueue$ 1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged (Native Method)
in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
The strange thing is, when I tried to create the connection a second time, I got the message that the user name is already used. When I chose another name, I got the same error.
All ideas,
Thank you
If you try to create repository first then delete ODI and table (SNP_LOC_REPW) SNP, check if metadata deleted successfully or not. create new, and then create the connection for the same.
Let me know your process also.
follow link below
ODI11g: Creating and connecting to ODI Master and repositories work
Thank you
-
Extended analytics. Error when you try to connect to the database
Hi all
We created the UDL file to the star schema database, and configure the DSN on EPM System Configurator (11.1.1.3)
UDL file is connected correctly, but when we try to 'Create star schema' we get an "Error occurred whil connection to the database" error.
Any ideas? are we missing something?
ConcerningHave you given the grant of rights 'connect' to the database or schema?
Varun
-
Get the error when you try to connect to the application of HFM of FDM (like Targe)
Hello
can someone help me when I open FDM and click metadata-> order pictures... and try to get focused on that time period, it generates an error "unable to authenticate the specified user %0. »...
Log file of this...
* Start the journal entry for the Runtime Error FDM [2008-11-07-06: 41:05] *.
-------------------------------------------------------------
ERROR:
Code...-2147220966
Description... Could not authenticate the specified user. %0
Error reference number: {06CFB6AF-0B83-40DC-8E32-EBD1275318D8}
NUM: 0x8004021a; Type: 0. DTime: 2008-07-11 06:41:05; SVR: DEV-HFM-APPS1; File: CHsxClient.cpp; Online: 2272; Worm: 9.3.1.0.1502;
Online: 391
Process... clsBlockProcessor.ActConnect
The component... upsWBlockProcessorDM
Version...................................... 931
Thread....................................... 4752
IDENTIFICATION:
User... osadashiv
Name of the computer... DEV-HFM-APPS1
App name... fdmapps
Client App................................... WebClient
CONNECTION:
Provider..................................... SQLOLEDB
Database server... 172.20.160.185
Name of the database... fdmapps
Trust connect... Fake
Connect status... Open connection
GLOBALS:
Location..................................... Sample
Location ID... 748
Location Seg... 2
Category..................................... WLCat
ID of the category... 12
Period....................................... Oct - 2008
Period ID.................................... 2008-10-31
POV Local.................................... Fake
Language..................................... 1033
User Level................................... 1
All Partitions... True
Is Auditor................................... Fake
I put the machine, global session logon information profile, etc... and already download 2 adapters... but still getting the same error...
Please help me...
Thanks in advance...Hello
It seems that something is wrong when FDM tries to connect to HFM.
You need to understand:
-To connect with FDM which user are you using
-Do you use unified or comprehensive as your method of connection (settings of integration)
-Have you attended a user in the profile of the machine?
-You entered a domain anywhere?The user you are using must have the access rights to HFM. Test it directly in the client.
Kind regards
Marc
-
computer Vista laptop does not connect to destop printer
Add a printer on a computer laptop port local \\computer\printer) on the computer vista laptop. (for xp wireless canon pixma ip3600 Office worked until computer laptop shutdown. now get error when trying to connect.) How to install printer permanent on laptop?Hello
- What is the exact error message you get?
I suggest you to refer to this link and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
It will be useful.
Maybe you are looking for
-
my iMac will stop all the time and I have to unplug it to restart
Sometimes it gets really hot I ever noticed with this mac but I have on my other Macs. I ran Etrecheck and here's the report. Can someone help me please Description of the problem: Shutdown EtreCheck version: 2.2 (132) Report generated on 30/09/16 1
-
My mac is too old for Xcode 7?
Hi guys,. I am new to xcode, so don't know if this post on the dev forums or here - I would like to know if this belongs here. I recently installed xcode 7 on my mid-2009 MBP 2.53 GHz/4 GB of RAM, that's already in El Capitan. I find that I have to w
-
SWOP HDD Satellite A300 satellite L500
Hello!! I had a toshiba satellite a300, who unfortunately died... I want to take the hard drive to a put on toshiba satellite l500 computer laptop my cousin...Siply I put it to l500 but it stacks to a point which shows over and over again something o
-
I listen to my Clip Zip so I am at work, I got about 7 hours per day. I Shuffle and including about 31 GB of music on it. During the day, it's great because it does not repeat itself. However, it seems that the Shuffled list starts at the same pla
-
Hello I had a problem with the black screen after logo window at startup. To solve it, I installed fresh windows 7 on my laptop Pavilion dm4 1140EZ. My laptop has Intel HD and ATI mobility Radeon 5000 graphics cards. On the HP site I downloaded the d