IEnvy m4-series 1015dx

I forgot the administrator password? I can't navigate this can someone help?

Hello

Enter: 45661295

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • What are the options I have to upgrade the Wifi in the HP Pavilion Notebook M7-1015DX

    The Pavilion M7-1015DX laptop I is equipped with a RALink RT5390R 1.1 802.11b/g/n wireless adapter.  He would go only to 54 Mbps until I found a link to RALinktech to get an updated driver which allows me now to get 150mbps.  But this is only half of what I can potentially get with my router.  I did research on the other card options wireless adapter HP with 'compatible' with this laptop.  As far as I see it, all are the same.  They have only max to 150mbps.

    The listed reference numbers are 655795-001, 675794-001, 657325-001 670691-001.

    I need a replacement of the wireless network card that can achieve 300mbps using 802.11n.  All HP part numbers I listed are capable of 300mbps, or are there others that I can look at and buy?

    With or without the bluetooth feature, no matter, I just need 300mbps talk to my router NetGear dual band.

    I had the adapter wireless Intel Centrino Advanced - N 6230 works with the correct drivers now on this series of portable M7.

    Also note: it's just a card Intel Centrino ordinary, not the ch (from what I can tell) and without a label to the HP part about this number.

    HP had the pilot throughout their download section of this wireless card.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108426-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5273910 & sw_lang =

    Download SP58641

    Wireless Intel, Intel PROSet and Intel my WiFi for Windows 7 drivers

    The installation may or may not be delicate on your end.  It was for me and the package would not install right.  Go to the real folder that it expanded the installation files, and go to the win7\S64\Install folder and run Setup from there.

    The installation takes a few moments, so be patient.  If Device Manager is open, you will see the detected devices and appearing as the drivers are installed.  Once installation is complete, you'll see a map of Bluetooth radio and at least 4 new entries under Network Adpaters.

    I am now running at the full 300Mbps, on 2.4 Ghz and can easily connect to 5.4 Ghz on my router Netgear Dual Band, but at 54 Mbps.  (But I can probably change the channel on the router and get a faster connection speed.)

    I strongly suspect that the 6230 model is not the only one who can work on this laptop, as the driver of HP is not specific to what model numbers of the adaters wireless Intel Centrino Advanced-N, then you might be able to run newer models, since we now know that this series wireless adapter is in the white list in the BIOS.

  • How to enable AHCI on my Pavillion m7 1015dx, contradictory to information.

    I have a Pavillion m7 1015dx with windows 7. I installed a Samsung 840 pro series 512 GB SSD as my first with a clean installation of Windows 8 and made my 1 TB HDD as my secondary drive. My BIOS, insyde H2O F22 and is very limited and I can't determine if my storage controller is set to AHCI. All the forums I've read say more recent laptops are on AHCI by default. However when I run the Wizard software that came with Samsung SSD is says "AHCI is not enabled" and my bencmarks of reading/writing are 519 / 480 MB/s respectively, when this disc is announced 540 / 520 MB/s. Also when I run PC Matic which recognizes them SSD also claims AHCI is not enabled. Who should I believe? If it is how can not turned on I activate the AHCI. If it is on why these two other programs would state that it has not been activated? Even if read/write speeds are not as advertised that it starts in about 10 sec, even with the judgment. My concern is the life of the drive and if the TRIM is set correctly.

    Ruby4670 wrote:

    Thank you. You have an idea why these two other programs of State AHCI is not enabled, I don't expect you to know the answer on this I was wondering. Thanks again.

    These programs are looking for specific registry keys in the operating system to see if they are enabled.

    HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci\\\
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV

    That's why they tell you that it is not enabled.

    The following image is from the office, I use that has a SSD as boot drive. The AHCI drivers are installed and activated.

    Best regards
    ERICO

  • Blu - Ray HP M7-1015dx player

    Anyone know if there is a blu ray player that I can install in my HP M7-1015dx? I just bought this laptop and would like to put a Blu Ray drive instead of dvd/cd player.

    Thank you very much for your help!

    Apparently, he uses the same disks as the dv7 series because the dv7 repair is provided for the M7 series as well. You want to just read (watch) Blu - Ray or do you want to burn them, too?

    Here are the reference numbers for optical drive:

    Disc Blu - ray ROM with SuperMulti DVD±R/RW Double Layer drive 681983-001
    Blu - ray Disc-R/RW SuperMulti Drive 681984-001
    Drive Double layer with SuperMulti 681982-001

    This company has the drive read-only for sale but the price is high:

    http://www.dectrader.com/_search.php?q=681984-001&gclid=CPDDitbZ1rICFQmpnQodWRkAnw

  • Switching to Apple Watch series 1 series 2

    What is the process of change in the spy series 1 series 2 on the same iPhone? I need to preserve all data from fitness. Cannot find procedure anywhere.

    Hello

    • Then connect your new Apple Watch, choosing the option to restore from backup during the whole upward:

    It is worth noting that the historic activity and health data on your iPhone, not on your watch.

  • Strava and series 2 Watch without iphone

    Series 2 Watch, save and upload to Strava just like a Garmin watch? Don't want to carry the phone and wear shows.

    Hello

    To learn the features of Strava app and the extent to which it supports the features of Apple Watch Series 2, I suggest that you consult app description and management of the resources of the developer:

    If you can't find the information you're looking for, I suggest you ask the developer directly.

  • Is that what you can get siri on the Apple Watch (series 2) to make a phone call, but on your iPhone, so when you're driving it then would come by phone from car speakers?

    You can get siri on the Apple Watch (series 2) to make a phone call, but do it on your iPhone, so when you're behind the wheel, he would then come through car speaker?

    You can also long are you your phone is connected to the car blu tooth. Not tried myself.

  • Apple Watch series 2 measure gain altitude or altitude?

    Hello

    I'm confused, the 2 series watch is not supposed to have a barometer, but today after I watched a training session (open air cycle) in the activity of application on my iPhone I saw 'elevation' win (622 m) and it was there (compared to a parallel measure with a Garmin 920XT). I registered the workout on the watch, but had my iPhone (6s) in my pocket. So the series 2 Watch measures altitude/elevation or he draws the data from my iPhone... I'll experiment more, without taking my iPhone along next time.

    During this time, is that what someone did similar comments?

    And of course, I would be grateful for any help on how to export training sessions (write to GPX etc.).

    Thanks and best wishes

    Yes, the watch/app will draw altimetry from your phone when it is within range.

  • Apple Watch series 2 protective case

    Hello

    Has anyone found a real Apple Watch S2 case? You are looking for a minimalist design, to display the watch itself without inhibiting its look, then perhaps a clear case (case bumper or other) will do.

    All cases online specify that they are cases Apple Watch S2, but look further into what they are not, as many of them do not account for the new air port (hole on one side, not two) and are also not the right depth, and cutting a port speakers are designed for S1 S2 not.

    You will need to protect my camera, I do use it in the gym a fair bit and worry about the damage.

    Thanks guys and girls!

    Hi RudeBwoy!

    I had the same problem. As far as I can see, case or bumper for the AW 2 series do not exist. I talked to Spigen, catalyst and a couple of others and any sites third 3rd say... manufacturers confirm that their AW products are NOT compatible with series 2 Watch, and that they are working on it!

    All thoughts of good screen protectors? !! They would be compatible? Some protection is better than nothing!

    Let me know if you hear anything!

    Thank you

  • before you go swim with my series 2. I need to activate the waterlock feature? or is it automatic? and just to unlock after swimming

    TNX

    Hello

    Swimming workouts

    Begin a swim practice in the application of the workout on Apple Watch series 2 models automatically activates the lock of the water, which locks the screen to avoid accidental interactions during your workout.

    To complete your workout and to evacuate all the water:

    • Press the digital Crown and side button at the same time (which makes a break from the workout).
    • Turn the digital Crown, which opens the screen and erases all the water inside of the watch (it can make a sound).
    • Forehand and press end.

    Other swimming

    If you plan to get your Apple Watch series 2 wet in other circumstances that when training of swimming - as to the course of General wear in a pool - you can manually lock the screen first and then drain the water from the speaker subsequently:

    • Slide up from the bottom of the face of the watch to open Control Center > tap water from lock to lock the screen.
    • When you're done: turn the digital Crown to unlock the screen and drained the water from the speaker.
    • The lock can also be unexpected water activated and unlocked immediately after exposure to the water.

    After bathing, make sure to clean your Apple Watch series 2 by rinsing them with hot water from the tap. Watch and the band should be dried with a non abrasive and non fluffy cloth.

    Strips of leather and stainless steel (Milanese Loop and Bracelet links) are not water resistant, so should not be worn when swimming.

    More information:

    Work with your Apple Watch - Apple Support

    On the resistance to water Apple Watch - Apple Support

    https://help.Apple.com/watch/#/apd707b42a5e

  • Wake up the screen on the Crown of the Apple Watch Series 2 is not displayed

    Watch app (iPhone 7 iOs 10) not the screen showing wake on the Crown of the Apple Watch Series 2 (look at OS 3)!

    What's wrong?

    Thank you

    Hello

    If you want to organize the presentation of the application on your Apple Watch using the app shows:

    • On your iPhone, in the application of the watch, go to: My Watch (tab) > presentation of the App.

  • Will the 2 series watch track swim properly if using a kick Board (without using arms to swim)?

    I have a friend that is considering a 2 Apple Watch series.  It will systematically use a Board during training for her swim meets.  The new Apple Watch will follow distance and calories correctly even if it does not use his arms while swimming with a surfboard?

    I used my series 2 during my bath today for the first time. It does a great job of tracking my laps... freestyle, free with paddles and open palms. But he is not one of my kicks. I threw it only Dolphin on my back (without arms). I swam more than 250 kick 3500yds, it does not register at all. Next time I might try on my stomach, but without a Board of Directors and use my arms a little to breathe.  Overall I was impressed but.

  • Where is the application of friends for series 1

    My wife has the original Apple Watch. She uses the functionality of friends (side-scroller) to add friends for quick access. I just bought Watch series 1 and I do not have this feature? That has been deleted? If this is not the case, how to do it on my watch series 1?

    Hello

    Under watch OS 3, the friends feature (which was available in previous versions) comes over and there is no direct replacement for it.

    When making calls or sending of new messages, contacts instead can be selected via the phone and Messages applications or using Siri:

  • Using the function of scan macOS Sierra HP Officejet 7300 series network printer does not work; He had no problem with El Capitan...

    Printer HP Officejet 7300 network series that allows to work flawlessly with El Capitan does not work after the upgrade to Sierra.

    With macOS Sierra, when used as a network print service printer works fine however scan does not work. Programs like the Image Capture, HP Easy Scan etc does not see the printer. However, if the printer is directly connected to the Macbook Pro using the usb cable, a new printer is added to the list of printers (it shows print and scan functions while the printer network in the list shows only printing function) and the scanner works well with Image Capture, etc. If the usb cable is removed disconnects this printer in the list and there is no way to turn it on. I have the latest update for the printer installed from the App store. It looks like a driver issue, but I wonder if there is a work around for this problem...

    Open Preview.app. Under file in the menu bar, you see import of 'name of your scanner?

  • Time series: finding max and min for each month

    Hello world. I'm working on a datasheet that has collected the data points for all day for the past 15 years.

    A column stores the date and column B contains a numeric value.

    I want to do the following:

    Create a new table (call it table #2) that:

    (1) is now a time series on a monthly basis (column A contains "year month"). This is why the table contains a header and 15 * 12 = 60 rows of data

    (2) B Col contains the Max value of this month.

    (3) C Col contains the value this month min

    Table #2 should be calculated automatically because I need to find these values for several series. Any ideas?

    Here is a way that I came up with

    In the table above, your original data is in columns B and C.

    I've added three additional columns (A, D and E):

    D2 = Year (B2) & NUMTOBASE (MONTH (B2), 10, 2)

    It's shorthand dethrone select D2, and type (or copy and paste it here) the formula:

    = Year (B2) & NUMTOBASE (MONTH (B2), 10, 2)

    E2 = IF (D1≠D2, 0, E1 + 1).

    Select copy of D2 to E2,

    Select cells D2 at the end of column E, block

    A2 = D2 & NUMTOBASE (E2, 10, 2)

    Select A2, copy

    Select A2 at the end of the A2 column, paste

    now create a second table summary as shown:

    For 'Summary Table 2016:

    the first four lines are the lines of header

    There are 35 total lines

    Enter the year in cell B1

    A5 = −4 LINE)

    B5 = SIERREUR (VLOOKUP ($B$ 1 & NUMTOBASE(B$4,10,2) & NUMTOBASE($A5,10,2), data: $A:$ C, 3, 0), "")

    Select cell B5, copy

    Select cells B5 at the end of row 5, dough

    Select A5 thru M5, copy

    Select cell A5 at the end of the M column, paste

    B2 = MIN (B)

    B3 = MAX (B)

    Select the cells B2 to B2, copy

    Select the cells B2 through M3, dough

    now duplicate the table and change the year to 2015 for the next year.

    You can duplicate this table as necessary to summarize a year

Maybe you are looking for