If 2 Airport extreme can stay connected to each other using their LAN ports?

Similar Questions

• Wireless devices cannot connect to each other using the router EA6900

  I use the 2.4 Ghz network and none of my wireless devices are able to communicate with each other...  I could not connect to a wireless printer to my laptop wireless (through the router) and thought it was unusual.  I tried ping does not work either.  I then plugged a cable ethernet to the laptop and could ping the printer wireless without a problem.   I tried other devices (wired and wireless connections) and it seems that no wireless device can ping any other wireless device.  If, however, one of the devices is connected, it works fine...  All wireless devices to connect to the router and internet without problem... It's just when they try to communicate with each other.  I have experimented with the desktop using the ethernet adapter, then the wireless adapter... same results.  My wireless using my previous router devices could communicate with each other.  It's almost as if this device has insulated AP running if this so-called it doesn't support that.

  Customer service said: I'm the only one with this problem.  Does anyone else have this problem?

  I have an ea6900 and it works fine for me. Sounds almost like you are connected to the guest network which would be sort of this way. Did you do a power reset? It has never worked? Try to remove the power and back to see if it clears up it.

• AirPort Extreme can disappear from the network

  

  

  I have an airport Time Capsule 802.11ac 3 TB, implemented as my router, connected to a cable modem Comcast.  I also three units AirPort Extreme 802.11ac connected via an Ethernet cable and configure in Bridge mode.  The settings were all made with Apple AirPort Utility, using the default settings.  All devices are new, and have the latest version of the (7.7.7) package.

  My problem is that one of the SSA keeps disappearing from the network.  The AP utility shows all devices, but unity of the 'room' is still "missing in your network.  When I restart the device by unplugging the, the unit seems to work fine for a little while.

  Because the problem occurs on a unit, I think not that it is a question of ISP or OS.

  Has anyone else had a problem like this, and understand you?

  It is not uncommon.

  There is a real problem with apple DNS...

  What modem do you use?

  Actual spending brand and model please... It is probably not related, but it is useful to know the complete network configuration.

  Question I would like to change.

  1. your names are too long and contain spaces.

  Use any short names, without spaces and pure alphanumeric characters. Names must be less than 10 characters... all names... both network name.

  See Pondini for questions that arise with more long names... and that was before Apple changed network SMB.

  http://pondini.org/TM/C9.html

  2. the WAN port on the AC model TC and AE are not reliable.

  In bridge, what do you do better move the connection to one of the LAN ports...!

  3. you have an unreliable ethernet cord or if it is installed in the wall a bad Jack which is down to... This happens especially in that self installed ethernet... and even the ordinary electrician has problems... sometimes wrongly wired a pair of broken. You should test all ethernet correctly and make sure have full gigabit connections.

  4. use static IP via both a dhcp on the TC and AE reservation jumpered on the internet tab. Least IP moves the less work THAT DNS must do to stay.

  If you have still questions after.

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• I can't connect to my WiFi using windows xp sp3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  I can't connect to my WiFi using windows xp SP3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  On the side of my computer's mac, the internet works fine.
  I just want the computer to recognize my home network, but it's as if we want a modem connection.
  Ask what you need to know the specs.
  I do this to play Halo on my Mac.

  This is the problem (which I corrected).  It's simple, all you have to do is to switch to XP, insert your mac installation disc and follow installation bootcamp, with all the drivers for mac compatibility.  The wireless just popped up as active.

  I lost my, but this isn't a problem: just go to the apple Web site, use the express track, diagnose your problem and have a representative call you.  They answer in a few seconds.  Replacement CD is very cheap ($16-2011).  You can get the CD of requests for replacement, which is another $ 16, but it is not important; XP does not use it, only the operating system for the drivers.  Mine came very quickly, in just 2 days.

  Hope that answers questions from the Internet.

  Now to play online Halo with my FPS Pro controller! 8 D

• I can't connect to my office using WPA2 network. I was never asked to sign in with my credentials, is not just to connect.

  I have my Surface RT. I can connect to my WiFi at home and my Verizon myfi without problem. I can't connect to my office using WPA2 network. I was never asked to sign in with my credentials, is not just to connect. My Windows 7 laptop, iPhone and IPad allows me to enter my network credentials and I can connect to my corporate network. The surface is the only I've seen fail to ask my ID. I imported certificates of company company of my such surface as recommended by people of the support surface. I even created a login account for local access with the same user name and password, still no luck. Any ideas?

  If you right-click on the network so that in the range of the context menu has the option "forget this network". This will clear the credentials and appears the next time that you connect the dialog to enter credentials.

  Make sure you have the updates installed December and supposedly includes improvements on the wireless.

• Airport Extreme network 4G connection

  I currently have the following configuration for my internet appliances:

  I have an Airport Extreme unit serving wireless three units Airport Express to extend WiFi coverage throughout the House. Physically connected to the Airport Extreme via ethernet are two televisions Panasonic who can access the same places predetermined via the internet (for example, BigPond movies and television, People, ABC iView, SBS OnDemand). To enable connectivity to other sites such as Netflix, Stan etc every Panasonic TV has its own unit of Apple TV connected to Airport Extreme via WiFi.

  I use Airport Extreme for all my other internal needs such as web connectivity MacBook and iPhone.

  The Airport Extreme WAN port is so physically connected to the ADSL modem and line phone Telstra for the Exchange, which is about 4 km.

  The problem is that the speed of download of the ADSL 2 + are poor, maxing out at about 3.5mbps. When I listen to the live broadcast of MotoGP and World Superbike racing the picture often freezes while he puts in buffer. Watched movies via Netflix and Stan often freezes too.

  I just ran a speed test on the Telstra Mobile 4 G network and I got a download speed of 111.94Mbps 41.77Mbps upload speed.

  Now, I'm thinking it would be great if I could connect my home network to the internet via their WiFi 4 G device X Pro Advanced.

  My question is this:

  Is it possible to connect the Airport Extreme to the Telstra WiFi 4 G device and the use of the mobile network for my internet and get rid of the ADSL modem? I don't think I can use USB Extreme airport connection, I think that the port is only to connect a printer, but I do not know if the Airport Extreme talk wireless Telstra 4 G device. Documentation of Telstra said their device will connect up to 10 devices using WiFi, but I do not know if there would be problems with the Airport Extreme router to talk to her.

  After spending heaps on all these units of Apple (1 x Airport Extreme) and 3 x Airport Express I don't want to lose, but if there is no way to Airport Extreme wireless unit of Telstra (or if this method is ridiculous) so maybe I might be able to get the device of Telstra to talk to all my other WiFi devices directly. Then, I might be able to sell the extreme and expresses it.

  I had a discussion with Apple Support through their chat session, but the person with which I spoke was not able to help.

  Thanks in advance.

  You need a device that is able to connect via Ethernet to the AirPort Extreme base station.

  With a plain/direct USB 4 G modem, a router broadband mobile sometimes can act in Bridge mode and thus provide a conversion method. For example, Dovado has these routers, but their modem (http://www.dovado.com/en/support/modems) compatibility list appears to cite that a single Telstra USB 4 G modem (ZTE) which supports the mode bridge.

  Your question indicates, however, that the 4G modem is actually a mobile access point (providing a local Wi - Fi network). If so, it may or may not be possible to use the wireless Ethernet Bridge (maybe even a model of Apple AirPort Express appropriate) to join this hotspot wireless and then connect via Ethernet to the entrance of the AirPort Extreme. This is all experimental, however. Various problems, including double NAT, are to be expected.

• New Airport extreme can't see printer

  I have a new Airport Extreme with an external hard drive and printer, but all of a sudden the printer to stop working with a "printer not connected" message. The reader and the printer are connected through a powered USB hub. What is the problem?

  While keeping the USB hub powered in place, try to temporarily remove the hard drive and have just installed printer. Can you access the printer now?

  If so, it may be that the powered hub may not provide enough power or it is defective. If this isn't the case, temporarily connect the printer to your computer. It is accessible now?

• Airport Extreme can amplify two distinct networks?

  I have Cox hispeed internet and a simple modem which is divided into two separate networks; one of my computers and the other for support (Apple TV, etc.). My unique adjustable Airport Extreme upward to stimulate each of these networks or I am only able to stimulate a? Thanks for the tips!

  I have Cox hispeed internet and a simple modem which is divided into two separate networks; one of my computers and the other for support (Apple TV, etc.).

  Not exactly what you mean by "split into two separate networks" here. Do you mean that you have an Ethernet switch connected directly to the modem that is used to make the separation? What is the make & model of the modem as Cox brings you?

  Nevertheless, your airport, or pretty much any other wireless router can only a network of 'boost' a single Wi - Fi connection.

• Airport Extreme loses the connection to the home network

  I have an Airport Extreme (AE) with Cox Internet in my house. Version AE 7.6.7 since the end of may 2016, I lost WiFi connection radomly. I had a Cox technician out who finished just change a 'filter' in our neighborhood who feed on other Cox at the reception. He said this analog filter had to be upgraded to a digital filter.  Despite this, my WiFi kept down again. According to other Threads of the community, this problem was solved by putting the IPV6 in AE parameter for "link-local only.  I did this and still it is falling.

  According to a recent post in support of Cox:

  Most of the routers to retail, especially those produced in recent years, are completely compatible with IPv6. Cox has determined that the Apple AirPort Extreme routers, including Time Capsule models, may know Internet connectivity issues when running the firmware released before May 25, 2016. For more information, contact Apple Support.

  To a Moderator: Apple will have an AE update for this problem?

  The moderators of the forum are not questions on a user to user support forum, so don't expect a response from an Apple employee.  Please contact Apple Support directly if you wish to speak directly with Apple.

  Then, Apple has already released the new firmware... 7.6.7 May 25... so it's not the question that you reference in the statement on the website of Cox. Cox was referring to a firmware sooner, like 7.6.4, for example in their declaration.

  We have seen a number of messages from other users of Cox, who reported that the new firmware has resolved connection issues that existed before.

  To find out where the real problem may lie, I suggest that you connect a computer (with the wireless turned off) directly to one of the LAN ports <>- on AirPort Extreme for a few days and keep an eye on the connection.

  Post back your results. Then, we'll know if you have a general Internet... connection problem that could be a problem of modem... or a single wireless issue.  In all cases, it will help if you provide the model number of the AirPort Extreme you have... and... he make and model number of the modem you are using at the moment.

• IPv6 and AirPort Extreme Gen 5 connection drops

  My ISP is over native IPv6 but the AirPort Extreme (AE) abandons the connection every 30 minutes or more.

  I've tried different settings IPv6 and the only one that gave stable results is to:

  -Block all the incoming IPv6

  -Allow teredo and IPSec tunnels

  -IPv6 tunnel fashion game

  If IPv6 is set to native, airport utility shows the Internet connection disabled. So far with the tunnel mode, it seems to work. IPv6 - test.com results show 6to4 good feature as well.

  Someone else had problems with the products of the AE and IPv6 settings?

  He would have nothing to do with IPv6, but the problem was triggered by the latter.

  This modem do you have? Brand and model please.

  And who is your Internet provider because your Setup sounds weird... it should not be necessary to the IPv6 block.

• An external HD w / 6th gen Airport Extreme can be used for NAS?

  I ' d like converted my Mac home theater use more, and I thought about options for NAS.» My current kit includes an old 802.11 g Express, so of course I will upgrade to a new extreme for bandwidth extra. I see the extreme has a full range of ports at the back, so can I attach an external hard drive of quality to the extreme and end up with a good - although budget - NAS?

  can I attach an external hard drive of quality to the extreme and end up with a good - although budget - NAS?

  Yes, if you are willing to accept extremely slow performance compared to a normal NAS.  The reason is that the USB port on the AirPort Extreme is only USB 2.0, and due to the limitations of speed processor on AirPort Extreme, the port is working at only half the speed of a USB 2.0 on a computer.

  So, at best, the 'budget' NAS can run about one third to half the speed of NAS normal. This might be OK for backups and other data that you may not access on a normal basis, but it would not be recommended to try to locate a picture of 'work' library, video library or other type of audio/video media on the USB key which will be available on a regular basis.

  Another issue to consider is that the USB 2.0 on the AirPort Extreme is in power, then you will probably need to use a USB powered with AirPort Extreme hub.

  Finally, most of the USB hard drives are now USB 3.0... and the port on the AirPort Extreme is only USB 2.0.  In theory, USB 3.0 is backward compatible with USB 2.0... but the theory does not always true in practice.

  If you already have a USB 3.0 drive, Apple does allow a privilege to return 14 days for the purchase of new AirPort Extreme, so if you still wish to proceed, you can try things for a week or two to see how well... or, even if... .they will work.

• Satellite Pro A40 can't connect to the WLan using the Win XP

  Hi all

  Newbie on your site so thank you in advance for your answers ;-)

  Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.

  Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?

  It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.

  Any ideas please?

  Thanks Mike

  Hello

  First of all, you must update the WLan driver.
  I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.

  In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
  If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.

  Last but not least, you can try to use this command in a DOS (CMD)
  Ipconfig / renew

  Big names

• How can I connect mac pro to a projector VGA port

  How can I connect my mac pro book to a projector with a VGA port

  should be pretty simple.  Acorrding to Apple, you have a Thunderbolt port video that supports MiniDisplayPort, so you would need a MiniDP to VGA, then a VGA cable, and then turn on the mirror in the display preferences, under the Big Apple icon at the top left of your screen, then go to System Preferences and there you go.

  John B

• iTunes can't connect to store purchases. allow communication on port 443

  iTunes can't connect to store purchases. the msg States allow communications on port 443. I did this and still get the same message

  I started having this problem today, I know its nothing I did wrong on my end, it was beautiful before glad im not the only one having this problem