If a mouse stops working, the device icon mouse disappears - Windows 7
If a mouse is dead, the device icon smile disappears from the window of computer peripherals.
In addition, after that buy us a new mouse the computer recognizes the new device and automatically download the software.
I ran a Logitec wireless mouse and will be replaced by another wireless mouse. Is Logitec a good brand
I think that it would disappear of devices
He would be replaced by an unknown device
That there are good and bad features usually why I don't bother with Wi - Fi those
Some just hit a price target.
I use the mouse to play red dragon and have no problems with it
It comes with a cd of drivers Wi - Fi and 40. we
Some do not, and yes it takes a bit for windows install base driver.
Tags: Windows
Similar Questions
-
The device icon and text missing in the imaging devices Manager
The device icon and text missing in the imaging devices Manager
I'm running MS Vista Ultimate.
The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.
The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.
However, the device will not work and will not reinstall.
When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.
Yet once, however, this happens when I try to install any imaging device.
I'm unable to locate information about the imaging devices in the registry.
I think that some registry entries are missing.
It is not the missing peripheral individual. This is the section in Device Manager.
The image error is logged:
"Windows didn't load setup." Contact your hardware vendor. »
This happens with any device inaging of anyone.
What imaging device do you use?
We can try a few steps and check if it helps you.
Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter
If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
Now follow the following steps:
1. Save the Windows Installer Cleanup Utility package on your computer
2. right click on the Windows Installer Cleanup Utility and run as administrator
3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button
4. click on all programs. Click on Windows Install CleanUp Utility.
5. click on the device driver (if on list) in the list of programs.
6. click on Remove. Click OK
7. click exit
Restart the computer for the changes to take effect
Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-deviceAfter back and let us know if it helped to solve your problem.
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I get a Microsoft Search Protocol Host has stopped working the alert box. How to solve this? It gives me the option to 'Search online (recommended)', but when I click on it nothing happens. Tried to restart and used Malware Bytes and my security suite Norton to seek something malicious, without success. Any suggestions?
Hello
1. have you made changes on the computer before this problem?
2. when exactly you get this error?
I suggest you try to reset to a new start Indexing Options by removing and then rebuild the index and check if it helps.
Your search index requires virtually no maintenance. However, if the index looking for files that you know problems must be in a location indexed; You may have to re-create the index.To rebuild the index:
a. open indexing and Search Options by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Indexing Options.
b. click Advanced Options, click the index settings tab and then click on rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
See the link below for more details:
Improve Windows searches using the index: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questionsFor more information, see the following Microsoft articles:
The problems with the search
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searchingYou can also check out the msdn below link for a similar problem and see if that solves the problem:
Hope the information is useful.
-
I ran 'FixIT' - could not resolve the problem.
Followed the manual guid, but ' ' LowerFilters was not present in my registry and then the guide had no more suggestions.
Y at - there anyone out there who could help?
Hello
Step 1:
You can try to uninstall the CD/DVD software of engraving. Check out the following link.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Once you uninstall the software, restart the computer.
Step 2:
Try to uninstall the CD/DVD drive on Device Manager. Check out the following link.
Uninstall or reinstall a device
http://TechNet.Microsoft.com/en-us/library/cc725782.aspx
Once you uninstall the device, restart the computer.
Step 3:
Check the status of the CD/DVD drive in Device Manager.
See the following link for more information.
Open the Device Manager
http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
-
The desktop icons keep disappearing... I need a permanent solution
Hello, I've seen other messages regarding this issue, but I have yet to find a fix for the problem. I know how to get them back by right click, select display and icons; but it takes only a few moments.
Any suggestions?
Thanks in advance,
AJ
Hello
1 do these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html===================================================
2. after the above:
Difficulty for the desktop icons set in not getting saved after restarting Windows
http://www.Winhelponline.com/blog/fix-desktop-icons-layout-not-saved-restart/---------------------------------------------
3. If necessary:
Save and restore the desktop icon layout in Windows NT/2000/XP/Vista
http://www.Winhelponline.com/blog/save-and-restore-desktop-icon-layout/Save and restore the desktop icon Layout in Windows Vista - free
http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/TIP : right click on desktop - DISPLAY - uncheck AutoArrange and snap to grid when you want to restore
icons or the restore will not work. You can re - check those as needed later and apply the Align attribute
on the grid before the auto arrange.-------------
Office catering - free
http://www.MIDIOX.com/Info
http://www.MIDIOX.com/HTML/desktop.htm--------------------
Lock the post Office icons and disable right click
http://www.techmynd.com/lock-desktop-icons-position-and-disable-right-click/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I have two printers. One of them: hp Laserjet P1505n just stop printing. the other is fine. Windows 7. Please notify. Thank you.
I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.
You can also run the troubleshooting of the printer.
Open the printer Troubleshooter
Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.
For more information, visit the below mentioned link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx
Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT
You can see the below mentioned links.
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer
-
Paint, calculator changed and the desktop icon has disappeared from the start bar
Paint my new windows 8 that I had to buy lost and calculator has no mode of the engineer and the desktop icon has disappeared and I had to click on any application and leave to return to the desktop. I had just restarted and updated a windows update and restart, which is good and after I on this once again, everythinig went wrong.before happened, I downloaded a cheat engine and I wanted to only uninstall using perfect uninstaller which also can not be uninstalled. Please help, can I send it to the factory without pay? I bought it just 3-4 days.
Hi Jonny,
Thanks for posting your query in Microsoft Community.
I understand that you have with disappearing icons on the desktop and the start menu. We are happy to help you in the matter of fixing.
Please follow the following suggestions to solve the problem.
Method 1: Check if the Show Desktop icons is enabled or not. Follow the steps mentioned below to do the same.
Right click on the desktop, point to view , and then click show the desktop icons.
Method 2: This problem could be due to corrupt system files or viruses in the computer. So, you can try to test the problem in safe mode and see if that helps.
Step 1: See the link to start in safe mode.
Start settings for Windows (including safe mode)
Step 2: If you are able to turn off the computer in safe mode, I suggest you perform the clean boot because your system in a clean boot state can identify if all parties third party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
How do I perform a boot in Windows
Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.
Also, try to run Microsoft Security Scanner to check if there are viruses in the computer.
Microsoft safety scanner
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.
-
The device icon lost blackBerry smartphones
I did a tour overseas and noticed my phone stopped working at halfway through - I could not send or receive calls or texts. I think that this happened to me once before when I was traveling overseas. To fix it, I pulled the battery and put it back in - and everything (ie the phone) has worked well. Then I noticed that had lost an icon - that is a picture of the device that allows you to position the ring on loud, quiet, vibrate, etc.. How to bring back the icon?
Also, does anyone know why the phone stops working abroad?
Welcme cmmunity supprt frums
Press the button on your BlackBerry (Menu) and SHOW all. See if it was hidden.
Second thing to do is research behind other icons to see if it is playing hide and seek with you. Sometimes, it happened.
-
Battery suddenly stopped working the NB200-10z
Once I plugged it in the charger while my phone was off.
He lit LED Plug and battery LED was flashing after 3 seconds.I reinserted the battery and it loads fine.
One day I was using my NB200 and he runs the accusation, I plugged and same thing happen but even after reinserting the battery it does not start.Plug in it for a long time doesn't warm battery or cell phone. I can only start it without a battery connected. Insertion of battery stops PC after 1 seconds and battery light flashes again after 3 seconds.
What does that mean? I tired battery put in the fridge because I read on the internet that he could solve, but no luck.
No idea how I can solve this problem.
Hello
First of all, must know that the laptop should run fine without the battery with AC adapter plugged.
Even if the battery is defective or empty, the plugged AC adapter should feed and you should be able to turn on the laptop.In case this isn't possible, I guess electronic power supply failure.
However, you might try the following workaround solution:
Try to propel upward and for the laptop without the starter battery.
Then go to Device Manager and uninstall the following entries under batteries:
-Battery composite Microsoft
-Battery method to check compatible ACPI MicrosoftReboot the laptop.
Turn off again and insert the battery.
Power on the notebook and check if the device should work correctly.Of course, it also would you recommend to test the laptop in the framework of another good and tested the battery.
-
HP Dear members,
Speakers Altec Lansing from my laptop - Touchsmart tm2 - 2102 YOU - stopped working (not), but it doesn't have such a problem with headphones. I checked after element:
1 IDT Codec Driver - OK--> reloaded also the last film in the HP site
2. audio settings - speakers are selected as a default device
Kindly help to solve the problem.
Thanks & best regards,
Perhaps, as roll back driver (as a solution sought another post) that no would be required now, solved the problem. Thanks for your quick post.
-
Explorer Windows has stopped working the message repeated
Whenever I click on all orders are left microsoft computer or less as a Control Panel icon, photos or music I get a message that says windows exploer has stopped working. I'm not trying to use the woindows Explorer so I'm not "understand what is happening
Hello
You can download this reg from my SkyDrive file:
http://CID-128fc518635be2dc.SkyDrive.live.com/self.aspx/.public/Ms%20Foren/registry/WER%5E_Explorer.reg
and double click on the file to import. If you are unable to do this, run regedit.exe and import the registry file here!
When the Windows Explorer crashes, Windows Error Reporting Service [1] creates a dmp under C:\Localdumps. Please download the file to your public Skydrive folder [2] and post the link here. I take a look at the discharge with the debugger, maybe that I can see what Shell extension is the cause.
André
[1] http://msdn.microsoft.com/en-us/library/bb787181%28VS.85%29.aspx
[2] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/ -
Built in laptop keyboard suddenly stopped working the Dell Studio 15
Dell studio 15 laptop
Vista Home premium 64-bit
Keyboard suddenly stopped working, using the screen keyboard now. All buttons unresponsive. No virus or malware found by updated AVG scan. The touch pad or external mouse, both work. I have no external keyboard. System Restore does not work. The driver is up to date and its status is "work prperly.
Help, please.Is it still under warranty, if so contact Dell
-
Explorer Windows has stopped working the pop
When I try to drag or copy and paste appear a folder that the message windows Explorer has stopped working and I can not then action I was trying to do. My laptop is running on Windows 7
Hello
This error may be due to one of the following problems:
- System files on your PC can be corrupted or incompatible with other files
- You may have an infection of viruses or malware on your PC
- Some applications or services that are running on your computer may be responsible for Windows Explorer to stop working
To resolve this issue, try the following solutions:
1. update your current video driver: update a hardware driver that is not working properly.
(To make sure you have the latest video driver installed, you can also get in touch with your computer manufacturer and download the latest version of the driver on their part).
2. run the File Checker (SFC) system to check your files.
- Click Start and type cmd in the search box.
- In the results, right-click on cmd.exe area, and then click Run as administrator. You may be prompted to type the password for an administrator account.
- Click on continue if you are the administrator or type the administrator password, and then click on continue.
- At the command prompt, type Sfc/scannow, and then press ENTER.
Refer to this link for more information on file system checker.
3 scan your PC for Virus and Malware infections.
4. perform clean boot to isolate if there is no third-party application or program causes this error.
5. test the image files that can contain corruption.
- Click Start, then click computer
- Click on organize, and select folder options and search in the drop-down list
- In the Folder Options window, click the view tab
- Check the option always show icons, never thumbnails
- Remove the control from the option to display the icon of the file on the photos
- Click OK to close the Folder Options window
6. run System Restore.
If the same product after all the steps mentioned, the next option is a upgrade on site.
Thank you.
-
Mac will not be stopped on the apple icon
My Imac doesn't stop when I click the Apple icon, I have to close it by clicking on my upper right screen name and selecting stop from there. This has happened for the last 6 months and it starting to anoy me.
Reset PRAM: http://support.apple.com/kb/PH14222
Reset the SMC. https://support.Apple.com/en-us/HT201295
Best.
-
My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services. I've tried everything and my router is intact. My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.
original title: Wireless not working not
Hello
1 have had any changes made on the computer before the show?
2. what operating system is installed on the computer?
Method 1:
Check the link and try to run the troubleshooter to check if it helps.
Windows wireless and wired network connection problems
Method 2:
Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Maybe you are looking for
-
120 envy: envy 120th Scan of the computer cannot be activated MAC running El Capitan
Hi guys,. I recently installed it all above named mentioned HP printer software but for some reason, I can't Scan for compatible computer. I need to work in order to scan a batch of documents and consolidate in 1 file. The native application of the M
-
How do I get the screen savers the previous operating system running
Hello I would like to be able to run some old screensavers that come from Windows 98. Of all the screensavers Win98, some of them do not work, but others who have separate .dll files do not work in my new OS. I tried to copy their files .scr so their
-
Impossible to disconnect/users on a Vista OS HP laptop
Hello We recently had someone leave our company, which has done its work using a computer HP vista laptop. We try to disconnect from his account by using the function "change user", but while the process is running, we returned to the profile of the
-
The title pretty much everything said. Now that I have improved my CC in Photoshop, I have a 7 day trial. I have disconnected and reconnected but still no better. I have a valid subscription to CC for Photoshop. How to get out of the mode of trial an
-
ESXi 5.1 Clone VM with SSH
Salvation;I had veeam error message error "Snapshot hierarchy is too deep." I decided to clone my virtual machine. But I can't install vcenter due to insufficient infrastructure and I decided to use the SSH commands.When these commands: vmkfstools-i