If anyone can help with my connection laptop and projector?

Similar Questions

• Does anyone can help with the display settings on Satellite 4070?

  My brother gave me his old laptop, a Satellite 4070, I wrongly thought was of Wi - Fi enabled and it is connected to my library with poor results.
  The display settings are gone and continue to go haywire and display a message saying:
  There is a problem with your display settings, the adapter type is incorrect, or the current configuration does not work with your hardware.

  I tried to change the display settings but they go back - anyone got any ideas on that?
  I know there is a product recovery CD, but naturally enough I don't have that either.
  Thank you

  Hello

  I m not exactly on this fault, but it seems there must be something wrong with the graphics driver and display settings.
  That's why I recommend you first remove the old driver and after restarting again try to install the graphics driver from the Toshiba driver page.

  I think you are using the Win98. Am I wrong?
  Then visit Toshiba, download the Trident display driver and install it!

  Good luck and have a nice day ;)

• If anyone can help with the decision-making of a virus on my computer?

  The virus comes from facebook and he's trying to make me activate defender internet windows. I use McAfee, and it detects no viruses. It is, of course, come by the defender of the internet.

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

• If anyone can help with a fix to this problem of usb?

  My keyboard and mouse logitech wired usb going on the blink ANDS I unplug and back in and it would be ok. The keyboard leave completely and I was getting ready to uninstal so and try reinstalling and accidentally made the mouse too. Neither work so I'm helpless. I bought a new combo wireless and when it is connected to the pc, it wouldn't install say mfg contact for pilots. Logitech said it is not needed and if windows should load. Does anyone have solutions? On win 7 here.

  stupid is as stupid! SOLVED with the help on the shortcuts. When my pc came looking for windows was opened and allowed a navigation. I could download smartpoint and all is well. Thanks for your help smitty!

• If anyone can help with MRS implemented

  Hello

  I'm trying to implement a SRM 5.5 environment and I'm having some problems:

  The production site is set up with VC and SRM installed and worked.

  When I connect now although I can't connect to the VC. (this is a timeout error and I have reset the timeout in the registry so that this problem can be solved)

  On the production site, I installed the VC and SRM.

  But trying to start VC once again, I get the attached error and event log indicates the error.

  Another problem is that after installing SRM on the reocvery site, I can't download and install SRM of the plug in Manager.

  The error states that "he cannot connect to the vsphere client.

  Any ideas on this would be appreciated.

  Patsfan

  Hello

  On the first problem, it seems that vCenter cannot connect to its database and therefore cannot start. Things to check:

  1. have you installed VC and SRM on the same machine

  2. have you created a separate for MRS database if you use a shared database server?

  Stefan

• If anyone can help with answers to basic on the first 12 items

  I used Premiere Elements in the past (up to the first 9 Elements) but only once a year to edit the video of last year my grandchildren. The change is now that I use a Panasonic SC-V520 and have been shooting in 1080 50 p. First Elements 9 does not support this format I think.

  My questions are:

  1 box of first Elements 12 import and edit this format?

  If the answer is Yes to question 1, can 2 I mix old images of my old Sony camcorder with this newest film for editing in Premiere Elements?

  3 can I then convert them to a Blu Ray disc to play on my reader DVD or a regular DVD disc to play on older DVD player which is not compatible to blu ray?

  4 I am wasting my time in recording in 1080 50 p and should I rather save new images in a different format.

  Thanks for any help you can give me.

  1 Yes

  2. Yes

  3 DVD players n ° cannot play BluRay discs - even if they are burned to a DVD disc.

  4 1080p50 is a perfectly legitimate way for shooting, especially if you're shooting with a lot of action because he has the real images of double 1080i50. However, your output video may or may not actually be frames at 50 p (or even 1920 x 1080), depends on what form of media you are published. BluRay than Premiere Elements output files, for example are 50i.

• If anyone can help with a report that retrieves the external ID field in the CRM

  I have an affiliate system where the customer imported 3600 + recordings, some of which were to the eternal ID ("field of your identification on the import file) together and some are not.

  The problem is that I have to update all of the CRM records and impossible to import the changes that I don't know what the original external id value. Catalyst support of business savvy that they can't include this field in a report (don't get started me on that...) and I'm now desperately need a way to get that data on the file and are essential for any news updates via the import of files. I would like to delete all files and start again except that there is no wholesale don't delete option in CRM BC - Yes you can do it in the products but not the CRM or Web Apps...! The only option available in British Colombia is to remove a list of screen at once, but then I have the problem that this issue is not all CRM records - only those whio belong to a secure area.

  My need is urgent, so any free help or otherwise would be approeciated and the solution must be one that allows me to run such export on an irregular basis.

  OK... Thanks to those who feel now offered help and I have a little a goose, but then isn't quite.

  Colombia-British in his usual style of the help documentation, are quite clear in their explanation of the way in which the Unique Id (which is actually the ID ' external ' e CRM under the Misc section). Here is the description from the import of the model

  • Columns of the foregoing represent all the available columns that can be imported using the import of standard contact feature. The columns do not need to contain information, but they must be present on the page, especially if a column instance contains information.
    
  • If your organization uses its own unique ID to differentiate customers, then use the ID column of your. If a value is present in this column, it will serve the unique identifier. This means that if the contact has been imported previously, and is to be re-imported then its details are updated, if not a new contact record is created regardless of the fact that contact a similar already exists in the system.
    
  • If the ID column of your unused, while contacts are usually identified by their email address. The minimum requirement for import a contact into the system that is to be your ID, Email address, full name, first name or last name must be on a single line. If these values are missing the line is not imported and import will move to the next line.
    
  • If you do not provide your ID or an email address and only a name then the contact is added every time regardless of the question of whether a similar already exists in the system.

  Now my understanding is that if you used the Id of your then being the unique identifier, and that these imports all future would have to use that... Well no, that is not the case at all.

  If you import a recordset using your Id, you can simply update these same records with just the email address - you don't need your Id or external at all!  So, what's the purpose of this field at all? I have no idea myself because he cannot be reported, may not be exported, it cannot be referenced - actually the only way you will see she is to open the CRM folder and view details of Misc and buried at the bottom you'll find. That's what I call a undocumented feature!

  So end of this is - my concerns that whatever proved unfounded and you don't have to worry about external / your field Id, no matter what the customer does.

  My advice - forget this field exists and do not care to use it unless you might happen to be interfacing in some 3rd party system through PAI, as seems to be the only use I can think of for it.

• If anyone can help with how to get the image

  a database in a view using Dreamweaver page?

  I have a page with a recordset and a database with text and images. The image field has a link to the file and the image as in /images/image1.jpg including the size.

  The thumbnail I want to display on a page of the main display is in the database using varchar with a link like /images/image1.jpg

  When someone wants to see the master page, they click on a link and everything which has been entered showing the database. At least everything except the image.  Right now it shows just /images/image1.jpg

  I don't know how to call the images to the database.

  Thanks for the help and information.

  conch,

  Check the entry of the database, and you may also have too many tags...

  In addition, check to see if your pictures folder is in the root directory, such as an incorrect path can complicate things.

  If this site is located on a remote server, feel free to send me the link here or by e-mail: [email protected]

  In addition, if you have a screenshot, it would be useful.

  Hang on!

  See you soon,.

  wordman

• If anyone can help with a brush QUESTION! Maxed out at 5000 size but still weak against document

  I have my smoke brush maxed out at 5000 in size and it is still tiny against the document. I called every number, try chat support and already posted this question once here and I can't get help. I don't know how to make this larger brush against the document canvas.

  Your view all zoom out everything is small when discovered 0.7% of the size. Use view actual pixels and it will be so large, that it does not fit on your screen.

• If anyone can help with a question about burning my project to a folder or disk?

  I'm burning my project to create items in a folder after attempts to burn it to a dvd... He gets through the encoding then starts the burn and stops at 24%... It's at this location for over an hour... What is typical and I should keep waiting or is it frozen? How long a project of 3 minutes usually takes to burn?

  GinaG

  What version of Premiere Elements and on what operating system works - it?

  Do you receive an error message when ever the burn on?

  a. do you stop markers in the timeline of the project?

  If you work with Premiere elements 13

  a. update 13-13.1 using Help Menu/updates to date of an open project

  and

  b. look at the problem with and without the disabling Intel HD Graphics 2000 and superior preference in the preferences.

  Please see Edit Menu/preferences/general.

  Let us begin here and decide then what then founded on the details of your response.

  Thank you.

  RTA

• If anyone can help with a calculation in Acrobat forms?

  I have a form created in Acrobat and impossible to get a calc to function. Field ' # guests_2 ' Gets an amount and should be multiplied by $75 for a total field of '2' HELP Please! Thank you

  There are two ways to do this. Tab in calculation of the properties of the field for the field '2' do either:

  1 field option simplified rating:

  Enter the following information: #\ guests_2 * 75

  It would be better if you changed the name of the field to something like "num_guests_2", so the entry could be changed to:

  num_guests_2 * 75

  2. custom calculation script:

  Enter the following text:

  Set this field value

  GetField("#_guests_2").value = Event.Value * 75.

  Assuming that the ' guests_2 # ' the field is numeric. You don't have to change the name of the field for that, but I think it would still be a good idea.

• If anyone can help with creative suite CS5?

  I get the error message whenever I try to update,
  no particular reason, just "try again later".

  Win 7

  everything worked fine for years

  until I reinstalled everything (because of upgrades to the computer)

  Download updates of CS 5 manually and install the same:

  Updates

• help with the new laptop and elements...

  Hi all...

  I recently bought a copy of 11 items to the disc. I love the program and learn to use it. Here's my dilemma, as I bought the program, I decided to upgrade my laptop.  Currently I am working on a laptop that has a cd/dvd rom. my new laptop with Windows 7 will probably not a cd/dvd drive. My question is... are at - there a way to download my current copy of items on the new hard drive when I don't have a cd/dvd player or do I have to buy a new copy?  The answer will determine what kind of computer, I find myself with. Also, what processor recommend everybody to work with photoediting?

  Thanks for all your help!

  ~ Nancy

  There are resources available for the download items 11 on your new machine.  You will only need to have the serial number of the disc you purchased to activate the software to use fully.

  The Adobe site:

  http://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements&loc=us

  A support site:

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  Photoshop/Premiere Elements 11:

  l http://prodesigntools.com/Photoshop-Elements-11-Direct-Download-Links-PSE-Premiere-pre.htm

• I'm having a problem with my redemption code.  It says product not activated.  I ordered 12 online adobe photoshop/first elements.  Contact seller.  They said contact adobe chat. I was wondering if anyone can help? Thank you

  I'm having a problem with my redemption code.  It says product not activated.  I ordered 12 online adobe photoshop/first elements.  Contact seller.  They said contact adobe chat. Chat is now closed.  I was wondering if anyone can help? Thank you

  Using redemption code

  http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html

  If you have purchased the software and reimbursement codes are coming as invalid then the seller needs to address that.  If you were able to acquire the serial number by exchanging the redemption code, then follow the advice of the seller and you contact Adobe support via chat (when available).

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner