If anyone can help with the decision-making of a virus on my computer?

Similar Questions

• Does anyone can help with the display settings on Satellite 4070?

  My brother gave me his old laptop, a Satellite 4070, I wrongly thought was of Wi - Fi enabled and it is connected to my library with poor results.
  The display settings are gone and continue to go haywire and display a message saying:
  There is a problem with your display settings, the adapter type is incorrect, or the current configuration does not work with your hardware.

  I tried to change the display settings but they go back - anyone got any ideas on that?
  I know there is a product recovery CD, but naturally enough I don't have that either.
  Thank you

  Hello

  I m not exactly on this fault, but it seems there must be something wrong with the graphics driver and display settings.
  That's why I recommend you first remove the old driver and after restarting again try to install the graphics driver from the Toshiba driver page.

  I think you are using the Win98. Am I wrong?
  Then visit Toshiba, download the Trident display driver and install it!

  Good luck and have a nice day ;)

• Need help with the decision of the laptop

  I'm sorry for the length of this post, but I really need help. I am buying a laptop and what should be a very exciting perspective (my first laptop purchase) turns into a nightmare that had me pretty much in tears over the weekend.

  My budget is not big - absolute maximum of 600 pounds, but I'd rather spend a little less than that.

  I mainly work of office (Word, Excel, database and PowerPoint) and also some Photoshop work. I also play a strategy game called Caesar 3. I want to charge my copy of XP on the computer or replace Vista or as a partition.

  Looking through the available templates in my price range and rising benchmarks, I found the following:

  Most have processors such as the Intel T5250 or T5450 or AMD TL 58, which are all rated as ok, but not very well. Some have the AMD TL 60, which is a little better and one or two have the T7200 Intel which is even better.

  On most of the machines graphics cards are the ATI Radeon Xpress X 1200 or the Intel GMA X 3100. These two are calibrated as not terrible and the review says that they cannot manage strategy games. Some of the models have the ATI Mobility Radeon HD 2400 and HD 2400XT and one or two have the HD 2600.

  The problem is that the models that have the best processor have the lower rated graphics card and those who do not have XP drivers, I see.

  Don't mind a 15.4 screen "(although the 17.1" would be very nice to have) and want a pretty big hard drive (160 +). I get 2 GB of RAM.

  I'm at my wits end. I don't want to buy a computer that will eventually take a minute or more to refresh a screen when you have more than two things open, or you will have to keep rebooting to make it work. I want to be able to play my one and only (Caesar III) game which is a strategy game and I want to be able to work in Photoshop and maybe one or two other things open at the same time, as a website perhaps.

  Help me please, anyone. I asking the impossible? I can't get my hands on an email address for Toshiba try to get clarity on their part on the issue of drivers and they will be available in the future.

  Then there is of course the issue detailing as each stock only a limited number of models, and we must choose between those detailing.

  I hope someone can help me!

  Hello

  The problem is you want to buy a laptop all over the place but don t want to spend a lot of money.

  In addition, you want to change the XP operating system and have XP drivers.

  Well it's boyfriend very difficult decision ;)

  A laptop for gaming with the graphics power full card cost slightly more than £ 600
  If you need to make a decision; You want to buy a gaming laptop and to spend more than £ 600 or you will have a notebook that is ideal for everyday use, like watching DVDs, in collaboration with the office software, etc.

  The Caesar game is unknown to me, but I assume that it doesn t need a graphics card high performance and it should work on a normal phone too.

  I think that a Satellite a200 is not bad choice for you, because some A200 laptop computers were shipped with the Intel Pentium Dual-Core processor and an NVIDIA GeForce graphics card.

  And very important is that all the XP drivers were already released ;)

• If anyone can help with a fix to this problem of usb?

  My keyboard and mouse logitech wired usb going on the blink ANDS I unplug and back in and it would be ok. The keyboard leave completely and I was getting ready to uninstal so and try reinstalling and accidentally made the mouse too. Neither work so I'm helpless. I bought a new combo wireless and when it is connected to the pc, it wouldn't install say mfg contact for pilots. Logitech said it is not needed and if windows should load. Does anyone have solutions? On win 7 here.

  stupid is as stupid! SOLVED with the help on the shortcuts. When my pc came looking for windows was opened and allowed a navigation. I could download smartpoint and all is well. Thanks for your help smitty!

• If anyone can help with answers to basic on the first 12 items

  I used Premiere Elements in the past (up to the first 9 Elements) but only once a year to edit the video of last year my grandchildren. The change is now that I use a Panasonic SC-V520 and have been shooting in 1080 50 p. First Elements 9 does not support this format I think.

  My questions are:

  1 box of first Elements 12 import and edit this format?

  If the answer is Yes to question 1, can 2 I mix old images of my old Sony camcorder with this newest film for editing in Premiere Elements?

  3 can I then convert them to a Blu Ray disc to play on my reader DVD or a regular DVD disc to play on older DVD player which is not compatible to blu ray?

  4 I am wasting my time in recording in 1080 50 p and should I rather save new images in a different format.

  Thanks for any help you can give me.

  1 Yes

  2. Yes

  3 DVD players n ° cannot play BluRay discs - even if they are burned to a DVD disc.

  4 1080p50 is a perfectly legitimate way for shooting, especially if you're shooting with a lot of action because he has the real images of double 1080i50. However, your output video may or may not actually be frames at 50 p (or even 1920 x 1080), depends on what form of media you are published. BluRay than Premiere Elements output files, for example are 50i.

• If anyone can help with a report that retrieves the external ID field in the CRM

  I have an affiliate system where the customer imported 3600 + recordings, some of which were to the eternal ID ("field of your identification on the import file) together and some are not.

  The problem is that I have to update all of the CRM records and impossible to import the changes that I don't know what the original external id value. Catalyst support of business savvy that they can't include this field in a report (don't get started me on that...) and I'm now desperately need a way to get that data on the file and are essential for any news updates via the import of files. I would like to delete all files and start again except that there is no wholesale don't delete option in CRM BC - Yes you can do it in the products but not the CRM or Web Apps...! The only option available in British Colombia is to remove a list of screen at once, but then I have the problem that this issue is not all CRM records - only those whio belong to a secure area.

  My need is urgent, so any free help or otherwise would be approeciated and the solution must be one that allows me to run such export on an irregular basis.

  OK... Thanks to those who feel now offered help and I have a little a goose, but then isn't quite.

  Colombia-British in his usual style of the help documentation, are quite clear in their explanation of the way in which the Unique Id (which is actually the ID ' external ' e CRM under the Misc section). Here is the description from the import of the model

  • Columns of the foregoing represent all the available columns that can be imported using the import of standard contact feature. The columns do not need to contain information, but they must be present on the page, especially if a column instance contains information.
    
  • If your organization uses its own unique ID to differentiate customers, then use the ID column of your. If a value is present in this column, it will serve the unique identifier. This means that if the contact has been imported previously, and is to be re-imported then its details are updated, if not a new contact record is created regardless of the fact that contact a similar already exists in the system.
    
  • If the ID column of your unused, while contacts are usually identified by their email address. The minimum requirement for import a contact into the system that is to be your ID, Email address, full name, first name or last name must be on a single line. If these values are missing the line is not imported and import will move to the next line.
    
  • If you do not provide your ID or an email address and only a name then the contact is added every time regardless of the question of whether a similar already exists in the system.

  Now my understanding is that if you used the Id of your then being the unique identifier, and that these imports all future would have to use that... Well no, that is not the case at all.

  If you import a recordset using your Id, you can simply update these same records with just the email address - you don't need your Id or external at all!  So, what's the purpose of this field at all? I have no idea myself because he cannot be reported, may not be exported, it cannot be referenced - actually the only way you will see she is to open the CRM folder and view details of Misc and buried at the bottom you'll find. That's what I call a undocumented feature!

  So end of this is - my concerns that whatever proved unfounded and you don't have to worry about external / your field Id, no matter what the customer does.

  My advice - forget this field exists and do not care to use it unless you might happen to be interfacing in some 3rd party system through PAI, as seems to be the only use I can think of for it.

• If anyone can help with how to get the image

  a database in a view using Dreamweaver page?

  I have a page with a recordset and a database with text and images. The image field has a link to the file and the image as in /images/image1.jpg including the size.

  The thumbnail I want to display on a page of the main display is in the database using varchar with a link like /images/image1.jpg

  When someone wants to see the master page, they click on a link and everything which has been entered showing the database. At least everything except the image.  Right now it shows just /images/image1.jpg

  I don't know how to call the images to the database.

  Thanks for the help and information.

  conch,

  Check the entry of the database, and you may also have too many tags...

  In addition, check to see if your pictures folder is in the root directory, such as an incorrect path can complicate things.

  If this site is located on a remote server, feel free to send me the link here or by e-mail: [email protected]

  In addition, if you have a screenshot, it would be useful.

  Hang on!

  See you soon,.

  wordman

• If anyone can help with my connection laptop and projector?

  I have an old projector which I easily connected to portable precedents and to bring up the image was simple, i.e. the click function + F4, but has no effect on my new laptop Toshiba.
  Could someone tell me please how to bring the image to the top of the image with my Toshiba laptop please?

  It will be interesting to know what model of laptop you have now.
  I presume that you have not read user manuals because it's always desctibed how to pass the LCD for external device.

  On computers laptop toshiba, it can be done with FN + F5. FN + F4 is for hibernation. Check it please small symbols on FN 1-12 keys.

• If anyone can help with a brush QUESTION! Maxed out at 5000 size but still weak against document

  I have my smoke brush maxed out at 5000 in size and it is still tiny against the document. I called every number, try chat support and already posted this question once here and I can't get help. I don't know how to make this larger brush against the document canvas.

  Your view all zoom out everything is small when discovered 0.7% of the size. Use view actual pixels and it will be so large, that it does not fit on your screen.

• If anyone can help with MRS implemented

  Hello

  I'm trying to implement a SRM 5.5 environment and I'm having some problems:

  The production site is set up with VC and SRM installed and worked.

  When I connect now although I can't connect to the VC. (this is a timeout error and I have reset the timeout in the registry so that this problem can be solved)

  On the production site, I installed the VC and SRM.

  But trying to start VC once again, I get the attached error and event log indicates the error.

  Another problem is that after installing SRM on the reocvery site, I can't download and install SRM of the plug in Manager.

  The error states that "he cannot connect to the vsphere client.

  Any ideas on this would be appreciated.

  Patsfan

  Hello

  On the first problem, it seems that vCenter cannot connect to its database and therefore cannot start. Things to check:

  1. have you installed VC and SRM on the same machine

  2. have you created a separate for MRS database if you use a shared database server?

  Stefan

• HP Pavilion a6000n - improvement of the system. Need help with the decision and suggestions

  Hi all

  I have a HP Pavilion a6000n, spec even with this link , except that I have 3 GB of memory and Window Vista Home Premium 32-bit.

  I think to update some of my computer hardwares that can run more smooth in some games and to improve my gaming experience.

  I'm looking to replace the processor and graphics card.  At the present time, I have an AMD Athlon (TM) 64 X 2 Dual Core Processor 4200 + 2.2 and a NVIDIA Geforce 6150SE nforce 430.

  My price range is around $100-$200 for processor and graphics together.

  I looked at cela processor and graphics card

  They will make a big difference and improvement than what I have at the moment?   If this isn't the case, then can you guys give me some suggestions on the choice of the better ones out there?

  Thank you!

  You have only a 300w ATX PSU (Power Supply Unit), then you will need to update if you plan to install a good graphics card.  Check the manufacturers minimum power required for the card you decide on getting.  As for the CPU, it does not require the upgrade - the graphics card is what causes your performance problems (in the games).  I would like to spend more money on a power supply and graphics card and leave the CPU alon (so far )

  Message edited by Kalt on 05/12/2008 23:18

• If anyone can help with a question about burning my project to a folder or disk?

  I'm burning my project to create items in a folder after attempts to burn it to a dvd... He gets through the encoding then starts the burn and stops at 24%... It's at this location for over an hour... What is typical and I should keep waiting or is it frozen? How long a project of 3 minutes usually takes to burn?

  GinaG

  What version of Premiere Elements and on what operating system works - it?

  Do you receive an error message when ever the burn on?

  a. do you stop markers in the timeline of the project?

  If you work with Premiere elements 13

  a. update 13-13.1 using Help Menu/updates to date of an open project

  and

  b. look at the problem with and without the disabling Intel HD Graphics 2000 and superior preference in the preferences.

  Please see Edit Menu/preferences/general.

  Let us begin here and decide then what then founded on the details of your response.

  Thank you.

  RTA

• If anyone can help with a calculation in Acrobat forms?

  I have a form created in Acrobat and impossible to get a calc to function. Field ' # guests_2 ' Gets an amount and should be multiplied by $75 for a total field of '2' HELP Please! Thank you

  There are two ways to do this. Tab in calculation of the properties of the field for the field '2' do either:

  1 field option simplified rating:

  Enter the following information: #\ guests_2 * 75

  It would be better if you changed the name of the field to something like "num_guests_2", so the entry could be changed to:

  num_guests_2 * 75

  2. custom calculation script:

  Enter the following text:

  Set this field value

  GetField("#_guests_2").value = Event.Value * 75.

  Assuming that the ' guests_2 # ' the field is numeric. You don't have to change the name of the field for that, but I think it would still be a good idea.

• If anyone can help with creative suite CS5?

  I get the error message whenever I try to update,
  no particular reason, just "try again later".

  Win 7

  everything worked fine for years

  until I reinstalled everything (because of upgrades to the computer)

  Download updates of CS 5 manually and install the same:

  Updates

• How can I remove the remenants of AVG anti virus from my computer? I tried the conventional method of Microsoft Programs.

  There is conflict between the above named AVG and symantec anti virus. I can't delete it from my programs free of charge.

  If Tommy tool does not help you, give this one a try.

  http://www.revouninstaller.com/

  I hope this helps.