If doesn't work is not inside the loop for the registration of the declaration file?
Hello!
I have the following documents open in Photoshop:
123456_mrp_ou. TIF
869548_mrp_ou. TIF
896589_mrp_in. TIF
896589_mrp_ou. TIF
.. and I have this if statement in a loop for to search for files with a specific 'pid' number and save them in the folder My Documents:
var originalPid = 896589 for(i = 0; i < app.documents.length ; i ++) { activeDocument = app.documents[i] if(activeDocument.name.substring(0,6) === originalPid) { var standardSave = new File('/Users/constantincerdan/Documents/' + activeDocument.name) activeDocument.saveAs(standardSave, TiffSaveOptions, false, Extension.LOWERCASE) } }
It did not find the two files and save them when I run. However, the loop without if statement runs very well and saves all the documents in the Documents folder:
var originalPid = 896589 for(i = 0; i < app.documents.length ; i ++) { activeDocument = app.documents[i] var standardSave = new File('/Users/constantincerdan/Documents/' + activeDocument.name) activeDocument.saveAs(standardSave, TiffSaveOptions, false, Extension.LOWERCASE) }
How it works with an if statement so that it saves only the two?
Any help is very appreciated!
You are comparing apples to oranges, you need to compare strings.
originalPid = 896589;
alert (typeof originalPid);
Tags: Photoshop
Similar Questions
-
Action button and actionlistener doesn't work is not inside the pop-up window!
Hello
I have a popup launched at the click of the button say "open popup.
Inside the pop-up window, even, I have a button, when click on which the popup is closing its not trigger and any action or actionlisteners!
all that exist on the same page.
How to go to this topic
Thank you
This is controlled by the autoCancel = "disabled" property of the pop-up window. The default setting is enabled which closes the popup.
Timo
-
LR 5 doesn't work is not on the new Macbook Pro.
LR 5 doesn't work is not on the new Macbook Pro. Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing. It comes up with the screen base but no signs and gives that an error occurred when changing the modules. Nothing I have tried seems to help. He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6. Anyone else having problems? Calls to adobe are no help and have to wait until Monday for technical support. Surely this must run on a NEW laptop with any other installed software!
Setup logs was very good. Application installed but is not working properly. Finally got Adobe support and it turns out be a file permissions error. Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed. Works fine now. Including this here in case when someone else is going through this issue.
-
Flash doesn't work is not on the website
I use CS3. When I put the flash in Dreamweaver and preview the page all looks and works the way I designed it. However, when all files have been published the flash animation is missing. I have published five files (flash, html, doc, movie jackets, flash debug and AC_RunActiveContent.js.) associated with the flash movie. Anyone has any ideas as to what can happen? The animation is a scrolling.
Join the Code
< div id = "row2" >
< script type = "text/javascript" >
AC_FL_RunContent ('codebase',' http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9, 0.28, 0', 'wid th', 100% ","height", ' 32', 'align ', ' top', ' src ',' campaign plan/visionscroll pluginspage ', ' quality ',' high ', ' ',' e http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash movi ',' campaign ',' plan/visionscroll '); end AC code
< /script > < noscript > < object classid = "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase ="" http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9, 0,28,0 ' width = "100%" height = "32" align = "top" > "
< param name = "movie" value = "campaign plan/visionscroll.swf" / >
< param name = "quality" value = "high" / >
"" < embed src = "campaign plan/visionscroll.swf" width = "100%" height = "32" align = "top" quality = "high" pluginspage = " http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type = "application/x-shockwave-flash" > < / embed >
< / object >
< / noscript > < / div >
> Do you mean the AC_RunActiveContent.js file? Yes, it has been downloaded and
> is in the same folder with the four other flash documents.The code of the page search the .js file in the Scripts folder:
When I point my browser to:
http://www.Jackson.Army.mil/Pao/scripts/ac_runactivecontent.js
I get a 404 - File not found.The browser cannot run Flash animation, if he does not find the .js file inside
the Scripts folder.Where on the server did you load the AC_RunActiveContent.js file?
--
ConcerningJohn Waller
-
HP Pavilion: Touchscreen doesn't work is not in the browser
My touch screen stopped working specifically in Chrome. It seems to work everywhere else, including IE. It's probably a frame in Chrome or something on the computer settings I managed to accidentally change? Thank you!
Hi there @jexylou,
Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the chrome browser works only not with the touch screen. I'll be happy to help you.
Open chrome
Put this in the address bar: chrome://flags/#touch-events
Change the setting "enable Touch events" "Automatic" to "Enable"
Please keep me informed of the progress of things.
If you need help, let me know and I will gladly make all that I can to help you.
Please let me know if that solves the problem by marking this post as "accept as a Solution.
To simply say thank you, click the Thumbs up below!Thank you.
-
USB doesn't work is not on the external hard drive
I have Vista Ultimate and here I noticed recently USB not working only not on the external hard drive. I tried to update the drivers and the system responds with the most recent driver already installed. Verified the USB ROOT property and shows nothing when it comes to th Ext. HD but it sees the usb hub and head phones. An organization can help its driving me crazy!
Hi Chaser07,
Follow the instructions below that may help you resolve the issue.
Method 1:
I suggest you try to use an external hard drive on another USB plug and check if it works.
Method 2:
Automatically diagnose and repair problems with the devices when the Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.
Click run now in the link below to diagnose and fix problems automatically.
Hardware devices not detected or does not
http://support.Microsoft.com/GP/hardware_device_problems
Check whether the problem is resolved.
Method 3:
Click on the link below to run Fix it which will help you to solve the problem.
Tips for solving problems of USB devices
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx
Check whether the problem is resolved.
Method 4:
Click on the link below and install the update.
Rollup cumulative update for USB in Windows Vista Basic components
http://support.Microsoft.com/kb/941600
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
IPhone 6s off right speaker doesn't work is not on the helmet
IPhone 6s off right speaker doesn't work don't not on the helmet, tried 3 different sets of headphones, have tried to clean shooting, reloading the OS etc., checked the slider etc, still no joy, any suggestions very welcome. It works on both speakers if I don't push the CAP fully home (but he then falls easily).
Are you sure that you're pushing all the way? If you are, this looks like a connector damaged in the phone. As a 6 s that it is still under warranty, then take it to an Apple store.
-
BB10: Touchscreen doesn't work is not in the Middle
Hi people,
In my application, the touchscreen does not work in the middle (see figure). What I mean is that it does not have any key event. So if I try to press a button which is in the Middle, it not to press. It has the same problem in all of my app (about 14) screens.
And the problem is not the device itself, because the touchscreen works perfectly in other applications (such as the browser). I even tried my app in another device with the same results.
Any idea guys?
I ve been struggling with this for a while now.
Thank you all.
Solved!
The problem was my activity indicator. It was in the middle of the screen, and even if it was not visible, he kept receive key events.
I solve it by putting this line inside the activity indicator (QML):
touchPropagationMode: TouchPropagationMode.None
Thank you jalue.
-
USB 3.0 flash drives doesn't work is not on the USB 2.0 in windows 7
My kingston USB 3.0 does not no flash drives or supported on USB 2.0 in windows 7 and 'The window error' occurred: Windows found driver software for your device, but has encountered an error trying to install.
Hi Faisal,.
What is the brand and model of the computer?
You will need installed USB 3.0 drivers on the manufacturer's Web site work with the USB 3.0 flash drives.
Try the methods provided below and see if they help to resolve the issue.
Method 1:
This problem occurs because the USB 3.0 device is not completely inserted in the port.
The USB 3.0 supports the devices USB 1.0, 2.0 and 3.0. The first layer of pins inside the USB connector are for USB 1.0 and 2.0 ports. The second layer of pins inside the USB connector is USB 3.0 ports. Therefore, to resolve this problem, make sure that the USB 3.0 device is inserted in the port.
Method 2:
Uninstall and reinstall the USB drivers and check if it helps.
To remove and reinstall all USB controllers, follow these steps:
(a) click Start, run, type sysdm.cpl in the Open box and then click OK.
(b) click on the Hardware tab.
(c) click on the button Device Manager.
(d) expand Bus USB controllers.
(e) each device under the node Bus USB controllersright click and then click Uninstall to remove them one at a time.
(f) restart the computer and reinstall the USB controllers.
(g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
We know the results.
-
RA VPN doesn't work is not on the second external interface
I've temporarily came from two Internet service providers in our ASA 5510. Which works very well. I tried to configure the VPN to our second outside interface (outside-XO) and who does not. The first/original VPN works great. Can someone look at the config and tell me if I did something wrong. It is not a customer number, because it is able to connect fine on the first interface. Thank you.
ASA Version 7.1 (2)
!
hostname FW01
dot.com domain name
activate the password * encrypted
names of
!
interface Ethernet0/0
nameif outside
security-level 0
IP address *.229.200 255.255.255.192
!
interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 192.168.2.3 address 255.255.255.0
!
interface Ethernet0/2
nameif outside-XO
security-level 0
IP address *.157.100 255.255.255.192
!
interface Management0/0
nameif management
security-level 100
IP 192.168.14.254 255.255.255.0
management only
!
passwd * encrypted
banner login attention is a private network. Unauthorized intruders will BE prosecuted to the extent of the ACT!
boot system Disk0: / asa712 - k8.bin
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT 2 Sun Mar 2:00 1 Sun Nov 02:00
DNS server-group DefaultDNS
dot.com domain name
permit same-security-traffic intra-interface
object-group service tcp Server
HTTPS and www description
EQ object of the https port
port-object eq www
object-group service tcp Mail
SMTP POP3 access description
EQ Port pop3 object
EQ smtp port object
port-object eq 32000
non-standard tcp service object-group
Port Description 1429 and 1431
port-object eq 1431
port-object eq 1429
object-group service DNS tcp - udp
Description to allow outside DNS resolution
area of port-object eq
object-group service FTP tcp
FTP description
port-object eq ftp
SMTPMail tcp service object-group
Description SMTP only access
EQ smtp port object
IQWebServer tcp service object-group
Www and port 8082 description access
port-object eq www
EQ object Port 8082
EQ object of the https port
port-object eq 8999
SFTP tcp service object-group
Description SFTP_SSH
EQ port ssh object
outside_access_in list extended access permit tcp any host *. *.229.201 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.229.202 object-group Mail
outside_access_in list extended access permit tcp any host *. *.229.202 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.229.202 object-group DNS
outside_access_in list extended access permit tcp any host *. *.229.203 - group of non-standard items
outside_access_in list extended access permit tcp any host *. *.229.204 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.229.205 - group of non-standard items
outside_access_in list extended access permit tcp any host *. *.229.208 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.157.101 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.157.102 object-group Mail
outside_access_in list extended access permit tcp any host *. *.157.102 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.157.102 object-group DNS
outside_access_in list extended access permit tcp any host *. *.157.103 - group of non-standard items
outside_access_in list extended access permit tcp any host *. *.157.104 - a group of Web server objects
outside_access_in list extended access permit tcp any host *. *.157.105 - group of non-standard items
outside_access_in list extended access permit tcp any host *. *.157.108 - a group of Web server objects
access-list 150 extended permit tcp any any eq smtp
access-list sheep extended ip 192.168.0.0 allow 255.255.0.0 10.1.1.0 255.255.255.0
access-list sheep extended permits all ip 10.1.1.0 255.255.255.240
Splt_tnl list standard access allowed 192.168.0.0 255.255.0.0
Splt_tnl list standard access allowed 10.1.1.0 255.255.255.0
access-list extended webcap permit tcp any host *. * eq.164.210 smtp
access-list extended webcap permit tcp host * smtp eq.164.210 all
pager lines 24
Enable logging
logging asdm-buffer-size 200
buffered logging critical
exploitation forest asdm errors
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
outside-XO MTU 1500
mask 10.1.1.1 - 10.1.1.15 255.255.255.0 IP local pool VPNpool
mask 192.168.14.244 - 192.168.14.253 255.255.255.0 IP local pool VPNCisco
ICMP allow any inside
ASDM image disk0: / asdm512.bin
enable ASDM history
ARP timeout 14400
Global (outside) 1 *. *.229.194
Global (outside-XO) 1 *. *. 157.66
NAT (inside) 0 access-list sheep
NAT (inside) 1 192.168.0.0 255.255.0.0
public static tcp (indoor, outdoor) * domaine.229.202 192.168.14.166 netmask 255.255.255.255 area
public static tcp (indoor, outdoor) *.229.202 www 192.168.14.2 www netmask 255.255.255.255
public static tcp (indoor, outdoor) *.229.202 smtp smtp 192.168.14.2 mask 255.255.255.255 subnet
public static tcp (indoor, outdoor) *.229.202 192.168.14.2 pop3 pop3 netmask 255.255.255.255
public static tcp (indoor, outdoor) *.229.202 32000 192.168.14.2 32000 netmask 255.255.255.255
static (inside, outside) *. * 192.168.14.6.229.203 netmask 255.255.255.255
static (inside, outside) *. * 192.168.14.28.229.204 netmask 255.255.255.255
static (inside, outside) *. * 192.168.14.205.229.205 netmask 255.255.255.255
static (inside, outside) *. * 192.168.14.29.229.208 netmask 255.255.255.255
static (inside, outside) *. * 192.168.14.3.229.201 netmask 255.255.255.255
TCP static (inside, outside-XO) *. * domaine.157.102 192.168.14.166 netmask 255.255.255.255 area
TCP static (inside, outside-XO) *. *.157.102 www 192.168.14.2 www netmask 255.255.255.255
TCP static (inside, outside-XO) *. *.157.102 smtp smtp 192.168.14.2 mask 255.255.255.255 subnet
TCP static (inside, outside-XO) *. *.157.102 192.168.14.2 pop3 pop3 netmask 255.255.255.255
TCP static (inside, outside-XO) *. *.157.102 32000 192.168.14.2 32000 netmask 255.255.255.255
static (inside, outside-XO) *. * 192.168.14.3.157.101 netmask 255.255.255.255
static (inside, outside-XO) *. * 192.168.14.6.157.103 netmask 255.255.255.255
static (inside, outside-XO) *. * 192.168.14.28.157.104 netmask 255.255.255.255
static (inside, outside-XO) *. * 192.168.14.205.157.105 netmask 255.255.255.255
static (inside, outside-XO) *. * 192.168.14.29.157.108 netmask 255.255.255.255
Access-group outside_access_in in interface outside
Access-group outside_access_in in interface outside-XO
Route outside 0.0.0.0 0.0.0.0 *. * 1.229.193
Route inside 192.168.0.0 255.255.0.0 192.168.2.1 1
Route outside-XO 0.0.0.0 0.0.0.0 *. * 2.157.65
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
attributes of Group Policy DfltGrpPolicy
No banner
WINS server no
DNS server no
DHCP-network-scope no
VPN-access-hour no
VPN - connections 3
VPN-idle-timeout 480
VPN-session-timeout no
VPN-filter no
Protocol-tunnel-VPN IPSec
disable the password-storage
disable the IP-comp
Re-xauth disable
Group-lock no
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelall
Split-tunnel-network-list no
by default no
Split-dns no
disable secure authentication unit
disable authentication of the user
user-authentication-idle-timeout 30
disable the IP-phone-bypass
disable the leap-bypass
disable the NEM
Dungeon-client-config backup servers
the firewall client no
rule of access-client-none
WebVPN
url-entry functions
HTML-content-filter none
Home page no
4 Keep-alive-ignore
gzip http-comp
no filter
list of URLS no
value of customization DfltCustomization
port - forward, no
port-forward-name value access to applications
SSO-Server no
value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information
SVC no
SVC Dungeon-Installer installed
SVC keepalive no
generate a new key SVC time no
method to generate a new key of SVC no
client of dpd-interval SVC no
dpd-interval SVC bridge no
deflate compression of SVC
Cisco strategy of Group internal
Cisco group policy attributes
value of server WINS 192.168.14.4 192.168.14.11
value of 192.168.14.4 DNS server 192.168.14.11
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Splt_tnl
field default value *.com
username * password * encrypted
username * password * encrypted privilege 0
username * password * encrypted
username * password * encrypted
username * password * encrypted
username * password * encrypted privilege 15
username * password * encrypted privilege 15
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 192.168.0.0 255.255.0.0 inside
http 192.168.1.0 255.255.255.0 management
http 192.168.14.0 255.255.255.0 management
http 0.0.0.0 0.0.0.0 outside-XO
SNMP-server host within the public 192.168.14.27 of the community
location of the SNMP server *.
contact SNMP Network Admin Server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
dynamic-map of crypto-XO_dyn_map 10 outside the value transform-set ESP-3DES-SHA
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
outside-XO_map 65535 ipsec-isakmp crypto map outside Dynamics-XO_dyn_map
card crypto outside-XO_map interface outside-XO
ISAKMP allows outside
ISAKMP enable outside-XO
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
ISAKMP nat-traversal 20
IPSec-attributes tunnel-group DefaultL2LGroup
ISAKMP keepalive retry threshold 600 10
IPSec-attributes tunnel-group DefaultRAGroup
ISAKMP keepalive retry threshold 600 10
tunnel-group, type Cisco ipsec-ra
attributes global-tunnel-group Cisco
address pool VPNpool
Group Policy - by default-Cisco
tunnel-group Cisco ipsec-attributes
pre-shared-key *.
ISAKMP keepalive retry threshold 600 10
Telnet 192.168.0.0 255.255.0.0 inside
Telnet 192.168.14.109 255.255.255.255 inside
Telnet 192.168.14.36 255.255.255.255 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 5
Console timeout 10
management-access inside
dhcpd lease 3600
dhcpd ping_timeout 50
!
INSPECT class-map
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class INSPECT
inspect the dns
inspect the http
inspect the icmp
inspect the tftp
inspect the ftp
inspect the h323 ras
inspect h323 h225
inspect the snmp
inspect the sip
inspect esmtp
class inspection_default
inspect the ftp
!
global service-policy global_policy
TFTP server inside 192.168.14.21 TFTP-root /.
192.168.14.2 SMTP server
Cryptochecksum:5eedeb06395378ed1c308a70d253c1b6
: endHello
Should work.
What I think is the routes:
Route outside 0.0.0.0 0.0.0.0 *. * 1.229.193
Route outside-XO 0.0.0.0 0.0.0.0 *. * 2.157.65If the first interface is ok, the ASA does not go to route packets via the second interface, so VPN will be not through this interface.
On the client, can you PING the two IPs outside of ASA or only the first?
Try to add a static route on the SAA to secondary education outside interface pointing to the address of the customer and try to connect via VPN and see if it works.
Orders:
HS cry isa his
HS cry ips its
Will be a big help as well, when the VPN connection attempt failed.
Federico.
-
sort order doesn't work is not in the library module
Hi, I shoot events with 2 different cameras, using a pool to the other and back dozens of times switching. When I come home, I import the maps of two cameras in Lightroom. In the library module, the small previews on the bottom sort by chronological order of capture OF the CAMERA. meaning that it shows all the photos sorted by capture of the camera one time and then all the photos, sorted by the time form camera capture 2. I have many, many would prefer if the form of photos, both sorted cameras sort by ABSOLUTE capture time, not a single camera, then another. In the library module, select view/sort/capture time but it just doesn't work. any help?
Thank you
Triple - make sure that the camera clocks have been set at the same period.
The best way to do that is to display the date of capture under the thumbnails mode grid library. In the library, view > Display Options and set the low label or the top of the Compact cell Extras to capture Date/time. Then set View > grid view Style > Compact cells.
Then view > sort > time capture. Look closely at the date/time under thumbnails and pay attention to the AM/PM (if you are in a country with 12-hour formats). The date/time by strictly ascending order?
If they are not strictly ascending, thanks for posting a screenshot of high resolution of your entire window of LR showing the problem.
-
X 3000 wireless mouse: scroll doesn't work is not on the X 3000 wireless mouse
Hello. My HP Wireless Mouse X 3000 is difficult to scroll down. I have to turn this small wheel very quickly, until I get at least scroll. It is connected by using the provided USB wireless receiver box. I tried on two PC with USB 2.0 and 3.0. The same problem. What can I do?
Hi there @anduble,
Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with your mouse's scroll wheel function in Windows 10.Try using the HP Support Assistant, if you have not already, to search for updated drivers if available.
HP computers - using HP Support Assistant (Windows 10, 8, 7)
HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)So if you are still having the same problem, try this page: HP PC - keyboard and wireless mouse troubleshooting.
Don't forget to check your mouse settings in Windows 10. Select (left-click) start button, and then select settings > then peripheral. Then select the mouse & touchpad in the list on the left side. You can make adjustments to the scroll wheel function in the options avauilable and link options mouse with dubbing .
Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.
-
Find the base of Object.vi doesn't work is not in the picture 3D Solidworks Import control
Hello
I try to import the Solidworks model, I get the whole Assembly in 3D image image but when I try to find the particular help object to find object.vi It gives me
Error 1 ganglion invoke in NI_3D photo Control.lvlib:Find Object.vi-> VRMLviewer.vi
Possible reasons:
LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
=========================
NOR-488: Command requires GPIB controller charge controller.Is there a specific way to be part of Solidworks or wjat could be the possible reason.
Thanks in advance.
Although you probably have names on your model, your VRML (.wrl) file does not work. If you try to open the file with a text editor, you can fix this by adding the following statement before processing:
Basis of DEF transform {}
This will allow you to access the location of the VI to find. The error is because LabVIEW has not found the
name in your VRML. -
Divide the keyboard doesn't work is not on the Horizon
Hi there: just received yesterday an Ideacentre Horizon (27 inches). I am wanting to use the virtual keyboard in shared mode, however there is no split option appear. I see two keyboards, as well as the opinion of handwriting, but not the keyboard split option. How can I make this work?
The Horizon is propped upward, in landscape mode.
Thank you!
OK, what operating system are you using, win 8 or 8.1?
In the bar of charms > settings > keyboard, you use ENG English (United States) US keyboard?
Here's a video of MS on 'how to use the touchpad.
http://Windows.Microsoft.com/en-us/Windows-8/using-touch-keyboard
If you do not use the keyboard ENG (US), see "how to add a keyboard configuration '.
http://Windows.Microsoft.com/en-us/Windows-8/change-keyboard-layout
See you soon
DragonRider
-
HP officejet 6500 has more: press the button doesn't work is not on the right side
Hi I tried to turn on my printer and it is stuck on maintenance mode and will not work my right from the touch pad is there a replacement for the touchpad or a way around the mainenance mode?
Hello @jgrier1,
Welcome to the forums of HP.
I understand that your printer is stuck on maintenance mode and the touchpad is not responding.
I would like to help.
I'm sorry, but the display on the Officejet 6500 has more, is not a replaceable part by the user.
Try to go through the document next to the touch screen.
It also can you go beyond the question of maintenance mode.
Maybe you are looking for
-
Cannot install the update of Java 7 11 on Firefox 18.0
I got the update of Java 7 10, which has the 0 - day exploit. Oracle has released the update of Java 7 11. I have installed and uninstalled the update of Java 7 10. Now I can't get Firefox to recognize Java. He tells me that Java needs to be installe
-
Growing awareness of Firefox Skype Click-to-Call
Hello! I'd like to edit regular expressions used by the plugin Firefox Click-to-call. I work online, and unfortunately, phone numbers that we use are entered by workers in a text field and so often don't are not properly formatted, so I would like to
-
Y at - it a State chart type or the flowchart describing the order of execution process model?
One of my clients asked me this question... I have a problem with a change in the order of execution in TestStand 4.1.1. [he has improved from 3.1 to 4.1.1] It seems that ProcessModelPreStep runs earlier in 4.1.1 to 3.1. This causes our model of e
-
I need to develop a project, which extracts data from database and sends the data to the server, I want to do it using PHP. Could someone help me how it develop to BB10?
-
Hello The slide show is done but I can't add text can you please let me know if this feature is available