If I entered my wps pin # on someone elses inorder to laptop for them to access the internet don't I put my computer in jepardy

Similar Questions

• Can someone tell me how I can access the internet on my laptop to someone else's House?

  I want to take my computer on a visit, I can access the internet at home someone else with their supplier?

  Hi Huw,

  If it is a WIFI connection and they provide the access codes and Setup appropriate (and maybe even if they are not depending on how they are configured), it should be no problem.  You will probably need to create a new connection to connect to their network and possibly another new connection to connect to internet (if they are separated).  I created portable work of my wife to work from home in less than 5 minutes.

  If you need to connect with a cable, then you need a cable and they need a way to connect to their network or their internet connection or even a computer connected to the internet connection can be used by ICS to give you access (even once, after you have setup the proper connections and codes installation).

  The following may or may not be of help (although designed for Vista, you can get the general idea on their part and XP and W7will be similar and you should be able to work out the differences - if not, look how configure wireless internet access in "The BONES" of aid):

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links): http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista: http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista: http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf

  The truth is it is relatively easy and is done all the time by many people.  Think about all the people with laptops who take their origin and work at the same time and maybe even at Starbucks.

  I hope this helps.

  Good luck!

• When the adobe application manager loads up, enter user name and password, continuous coming unable to contact adobe, please connect to the internet and try again.

  When the adobe application manager loads up, enter user name and password, continuous coming unable to contact adobe, please connect to the internet and try again.

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Chromebook: Sent someone at - it a laptop for repair because the keys were not working?

  Several keys on my keyboard do not work.  As suggested on this forum, I have powerwashed the Chromebook twice with no change in the problem.  I contacted HP and I received the box to return it for repair under warranty.  My question is this: does anyone know if I should including the adapter?  The person of tech for the repair, I talked said I shouldn't include it but said that the documents sent by the repair center to register.  I called back several times to try to get what I thought, it was a simple answer or not available.  I want not to return the adapter so I won't get it but I don't want to prevent the repair center to be able to fix the keyboard.  Thank you!

  @NicoleNEO

  The only time that you must include the AC adapter is when it is supposed to be a problem with this component.

  HP has all the cards for all computers, laptops, tablets and desktop computers.

  Given that the HP representative said the, you do not send in the adapter.

  Cover your back:

  If you wish, put a note in the box that indicates that you have said do not send adapter.

  And, Yes, if the problem with the keyboard is revealed to be the adapter, you need a new adapter.

  Add to your notes that if the problem is not found, you suspect the power adapter, after all.  HP can you send simply should the tech Department think that a new adapter is needed to solve the problem.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Can someone point out code examples on how to access the windows registry?

  I'm new to the Acrobat SDK/Visual C++ and would like to know how to access the windows registry to view the identity of the current user of the reader.

  I know it's at the following registry location:

  HKEY_CURRENT_USER\Software\Adobe\Adobe Reader\9.0\Identity

  I don't know how to access programmatically by using Visual C++.

  Thank you

  Gregory

  There is nothing special a plugin regarding the registry - standard OS calls work fine.

• I use a lot my daily life of the computer. I hear CLICKING noises that are not caused by me! Who and where are the clicks noises coming from? Is there a ROOTKIT, someone somewhere romoting access my internet service?

  Is there a Rootkit, or someone somewhere romoting access my internet service?  I use my computer for several hours every day.

  This year I went through a CRASH my system in September due to my memory stick in my digital camera INFECT my computer.  I bought a new computer that's how it was.  I'm also a MODEL all CIS although I am learning.  Since then, I've downloaded the AMOUNTS of VIRUS protection.  Of course, I didn't know it was my stick of memory from my digital camera which has infected my computer, I only understood what a month ago.  So, you guessed it, even my brand new computer became infected soon enough.  I recently did a RESTORE on it, which has erased everything.

  My point is, I had about 4 people from remote access my computer to try to resolve the various problems with it several times last year.  These people are found in various places: Argentina, India, Phillippians.  I found it interesting.  Whenever they take control of my computer from their remote location.  Once the session is completed, they finished their access.

  Why what I hear clicking then I use my computer?  As I wrote this, I heard it about five times.  What is it?  Why gives me the feeling that someone is using my internet.  Talk about paranoia, makes me think that they can get in my email when I look at my bank account etc.  Is there a possibility that this actually happens or not?

  My son has a laptop that he uses a lot with the internet service that I use.  His laptop using WI - FI.  It uses the X - Box live wi - fi.  These things are going at the same time while I use my internet connection.  Would this be causing clicks?  I would like to know if there is violation of privacy occurring and/or and "OUT OF BOUNDS" type of question, where someone from a remote location using my Comcast service internet and maybe even can see confidential things on my personal login.

  Thank you, WG

  I used my mouse that you asked and he makes no noise whatsoever (it's a laser wireless mouse) - well it makes a rattling noise when I click with the right button or left mouse on an icon as it should, but nothing outstanding at all - is the click made by the mouse when you click on an icon or a hyperlink that you speak?  And you say he doesn't mouse, but from somewhere inside the computer?

  Someone smart enough to gain access to your system to be able to do the things you're afraid of that happening is smart enough to make sure that the computer does not have a noise when it occurs to give the fact that it happens.  In addition, access would be through the network connection so let's do a test.  Remove the connection from the system (I mean disconnect the cable or ethernet connection or remove the wireless card or go to network connections and sharing and disable every single network, you will find (don'tdelete - just disable their) or better yet, just remove the connection of the moden provided by the ISP, so there is NO WAY) a connection could get through.  Then see if clicks continues.  If so, it has antyhing to come with your internet connection or a pirate in your accounts. If it does not go far, it is possible that some network devices is originally of the problem (or that you are currently connected to a web site that generates the rattling noise, but I seriously doubt that this is a sign that everybody won that kind of access to your system (even if it could be malware as I mentioned earlier).

  I honestly have no clue what inside the computer could cause this noise that often and that constantly. It is not a problem of software for me.  I still think you should try the suggestions I made in my previous post (especially the search for malware and do a clean boot).

  If you this concerned and you have tried everything that has been recommended, I stick a reputable computer repair shop and ask them to check it out. If it occurs when they use the computer, they should be able to find the source even if they remove all to do.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP ENVY 7640: WPS PIN

  I'm trying to connect my laptop to my new HP envy 7640 All in One Printer. When I do this, I enter the code WPS PIN of a label on the bottom of my router. I enter the correct number. But it does not work!  Why?  What's wrong? I want an expert or a person of HP to tell me the right answer here.  I would like to be able to print remotely from my laptop.

  Jim Hulton

  The write stuff

  Blue Bell, PA

  Hello

  I don't know whether or not it is the right PIN. Please put the CD on your laptop and start the installation. You don't need a PIN code, the printer will get your laptop network password then connect.

  Note: I used the SAME method of installation test dozens of times with my desire 7640 loan and get 100% of good results.

  Kind regards.

• where can I find my for Hp officejet 5740 WPS pin with printer setup problems.

  Where can I find the WPS Pin code on my printer? HP officejet 5740? Having problems connecting to printer.

  Here is your answer. The WPS pin code is located on a label on your router. Otherwise, you will need to access your routers administration pages and search to find the WPS PIN here.

• 5740 HP Office Jet: Wps PIN?

  Need code for my printer wps pin

  Hello

  Please watch the following Youtube which is for a similar printer.

  https://www.YouTube.com/watch?v=FoDc9wn3fJs

  Kind regards.

• OfficeJet 5740: WPS PIN for Officejet 5740

  I use 10 Windows on a custom 64-bit computer. I just bought a HP Officejet 5740 e-all-in-one printer, and I'm stuck trying to find the WPS PIN code. I know that my router has a WPS PIN, but your configuration says that the printer has this number. Where can I find?

  It's one you want to use, the routers WPS PIN.

• HP 8710 pro: find the WPS PIN code

  THE WPS PIN NUMBER NEED TO INSTALL THE PRINTER 8710

  Information WPS: The best for you connect by following the instructions in the User Guide on the traditional wireless router.

  No need to PIN code. If your router supports WPS button method, please watch the following video.

  https://www.YouTube.com/watch?v=FoDc9wn3fJs

• Firefox has recently discontinued. I opened it again, and I had lost my pinned tabs. How can I find/restore them?

  Firefox sometimes stops, but this time I opened it as usual and my pinned tabs have been lost. I searched through the parameter etc but I can't find a way to get back them, or at least to find them. Any ideas?

  Do not close Firefox. Please save all your files of sessionstore in a safe place for potential recovery/recovery operations.

  You can open the settings file (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button.

  In the window that launches, scroll down and save a copy of all the files whose names begin with sessionstore to a safe place, such as your Documents folder. If not too much time has passed, we may be able to use to recover your blank tabs.

  Then you could check the menu history for 'restore previous Session "? This can appear on the application ('3-bar' menu) or on the menu bar.

  If 'Restore previous Session' is grayed out, then either Firefox has already loaded your session previous windows and tabs, or could not load the file. Check the menu history the possibility of re-opening closed windows and then labels in each window. Nothing salvageable?

  The types of files that you can find in your sessionstore files include:

  • sessionstore.js: windows and tabs in your Firefox session currently live (or, if Firefox is closed, your last session)
  • sessionstore.bak: the windows and tabs in your last session in Firefox
  • sessionstore.bak -datetime: windows and tabs in Firefox that was alive at the time of your last update session
  • sessionstore - 1.js (or other numbered files): windows and tabs when Firefox was unable to update the sessionstore.js file registered

  Can take you a look at what you have and the date / time of the different files to see if you think that one of them would be the windows and tabs missing?

• Can someone tell me how do you remove or change the name of a library on the opening?

  Can someone tell me how do you remove or change the name of a library on the opening?

  You remove an Aperture library by selecting it in the Finder and delete it like any other file.

  To rename an opening, library, use the Finder-click on the name of the library and enter a differnet name.  You can also select the library in the Finder, then enter the ⌘I key combination to open the information panel. Then change the name in the Info Panel.

  

• Satellite U300 - F2 to enter Setup, F12 to access the selection of Multiboot Menu

  Hello

  I recently bought a portable Satellite U300 and sometimes when I turn on the laptop the screen message says:

  Press F2 to enter Setup, F12 to access the selection of Multiboot Menu

  I press F2 and F12 but there is no answer.
  First of all, why I get this message on the screen instead of being connected to the laptop as she normally does?

  Secondly, why the F2 and F12 does not?
  I hope that someone can offer excellent advice!

  Regards, Barry

  Hello Barry

  This menu is available on all laptops with Phoenix BIOS version. As people say this message, choose F2 or F12, but not both at the same time.

  Press F2 and keep portable start it toward the low during a few seconds and the BIOS settings should appear on the screen. It is the same with F12.
  Believe me, I did this 100 times on several equipped laptops BIOS Phoenix and two options appear whenever I want to use.

• How to access the sbRIO DIO pin

  Hello

  How to access the pin the sbRIO DIO.

  I enclose the code. According to the code of the indicator DIO2 is supposed to blink, but it is not happenning. Can someone please review the issue and let me know (ASAP) where I was wrong?

  P.S Its URGENT!

  Your FPGA code is more complex that it should be.  Something like this will do what you want.

  

  Now your RT code... You are simply flashing the fater LED that you can see.  While some expected between your output setting.  I would also use a shift register to store the current value and then just reverse.  In this way, that you have only 1 entry per loop.