If I start Photoshop I get 3 error messages: 1. FastCore-Routinen-Modul 2. MMXCore-Routinen-Modul 3. Mehrprozessorunterstutzungs-Modul could not be loaded because the tool does not work with this version of Photoshop.

Similar Questions

• The product key you entered will not work with this version of windows

  I have a product key for windows 7 Professional n but I used a professional installation usually windows disc 7 and now my windows 7 wont turn on I get the message "the product key you entered will not work with this version of windows. Any ideas how to solve this problem?

  Seanhough

  You may be stuck re - install the version you have the key for or by purchasing a key for the version that you have installed.

• My old themes do not work with this version of FF.

  On the latest upgrades FF bit the themes available considerably decreased and now the majority of my registered themes said "not compatible with this version of FF. Whyzat?

  You are using a beta version and not the current stable version.
  Beta version using decreases your chances of having complete (full) themes compatible because the next version can use toolbar buttons that have not been used in the current version and a theme must include the icons of all the toolbar buttons to work properly and be compatible.

• Could not load the module of mmxcore routines because it does not work with this version of photoshop?

  I get the message above when starting Photoshop CC 2014. Click OK and it loads fine but just a bit boring. Seems to have happened since the update on 5 August. Photoshop shows as version 14.0.0 final although CC App shows as up-to-date. Wouldn't be version 14.1?

  Decided to uninstall & then re-install & problem don't sort - no error message and now on the latest version - 2014.1.0

• Firefox itself 3.6.9 upgrade and now I can't print anything from an open page, because HP Smart Web printing does not work with this version. What is an extension of replacement?

  "An unknown error has occurred while printing."

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

  The lack of compatibility of the HP Smart Web printing add-on shouldn't stop a printer HP to work with Firefox - all you lose is this stupid floating toolbar and adds some features.

  File > print or {Ctrl + P} should begin printing again, so all you have to do is make sure that the correct printer is selected, and then click the OK button.

  My advice is to try to the reset mentioned in this article.

• Maintenance message: Microsoft obsolete component DLL is not compatible with this version of windows.

  I found a message in my "maintenance" section that says.  Obsolete Microsoft component DLL is not compatible with this version of windows.  What - what it means and what I can do about it?

  Hello NancyMcKinzie,

  Please see the thread here because it made reference to the issue you describe:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/why-do-i-have-this-message-your-version-of/5e73c806-a4e1-44a1-8063-13cf83e9e4e6

  Let us know if it helps.

  Marilyn

• After getting a new mac mini, all of my adobe products worked except photoshop. I get this message. Check with the developer to ensure that Adobe Photoshop CS5.1 works with this version of Mac OS X. You may need to reinstall the application. Don't forget

  After getting a new mac mini, all of my adobe products worked except photoshop. I get this message. Check with the developer to ensure that Adobe Photoshop CS5.1 works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and OS X. I bought it originally, but do not know were my installers are. Can I get a new installer?

  1st, CS5 is 4 + years old so you MAY have problems with the latest Apple operating system

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  - and a Java update https://forums.adobe.com/thread/1507936

  -Update may break things https://forums.adobe.com/thread/1772260

  2nd, try previous versions http://www.adobe.com/downloads/other-downloads.html

• Computer not starting and I get an error message

  After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.

  Hello

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The information about the registered printer are not compatible with this version of Photoshop

  Hello

  I hope someone can help us. I'm a COMPUTER technician in a school, we have about 500 machines to Windows 7 64 bit with around 600/700 users - 200 machines have the CS5.5 Master Collection on which is installed. We have an intermittent problem with printing from Photoshop (32-bit and 64-bit versions). Our printers are for the most part, the (modern) HP LaserJet printers, but we have an inkjet Epson B-510DN and some copiers Xerox too. The drivers are all installed on a central print server running Server 2008 R2 and shared via the client computers group policy.

  In the rooms where Photoshop is installed, intermittently when a student goes to print, we will receive the following error message:

  Saved printer information are not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before you print.

  Photoshop will be gray and then the button "Print" and will not let the user print again. The strange thing is that we can still print from other software such as Microsoft Word or Microsoft software or even non - same Illustrator will print. It just seems to be Photoshop it's has all the problems.

  This occurs when you print to a printer on the site, 90% of whom are HP. As a general rule we set up all of our HP printers with HP PCL6 universal print driver because it facilitates the management of the various models of printers, and we did not limit ourselves atall yet. We are aware that the Adobe software is "preferential" for Postscript drivers, but aren't our printers, HP PCL is their mother tongue. We tried to change a printer for the Postscript UPD driver to test but he brought no improvement. We also saw the issue in depth altogether with our Epson B-510DN, which is configured with the newer model specific driver Epson as uses our photography service. As we see with different printers, I don't think the printer drivers are to blame - unless someone want to prove me wrong.

  Like I said the problem is intermittent, and we are having trouble tracing it down for a user, computer, or a software problem, as it is so intermittent. Has anyone another considering cela and managed to overcome? Given that it only happens in Photoshop is this a bug that Adobe have recognosed and fixed the CS6? The only solution we found that he must go in printer, change the default printer from one to the other and vice versa - cela seems to shut up Photoshop.

  Thank you, Dave.

  Here's the answer that I received from Adobe, and it worked.

  'Ok. Try to open 'print', while holding the space bar; He ignores all the saved values. "Also, make sure that the correct printer that he set as default.

• Could not complete your request because the file is not compatible with this version of Photoshop.

  Hi - I tried for a few days in order to reopen all file ive created with photoshop cs5 but ketting the same message "Could not complete your request because the file is not compatible with this version of Photoshop."

  the file is a psd file (just the regular photoshop save as an option) and the file in photoshop consisted of a quicktime movie file - which stood on a layer... (which I could rub through in the animation timeline) and a new layer video in which the individual frames, I drew some images with the brush.

  I can play the video with two video layers in ps cs5, but when I record and try to open I get the message "Could not complete your request because the file is not compatible with this version of Photoshop."

  I have no antivirus or norton... programs etc on my computer

  and ive tried to do this on a mac and a pc and get the same result.

  its crazy because im saving the file with the same im version tries to open it with.

  any help meet me would save a looming deadline.

  Thank you

  I noticed that the psd file is only about 10 MB, but the movie quitime file (as a stand-alone file - (before that I made in photoshop is 650 MB)) - is this a problem?

  Have you installed all the updates to Photoshop CS5? (the current version is 12.0.3)

• Hey there, I have a problem, I paid for the creative cloud each month. 30 days ago, I downloaded the new update only in the trial version of photoshop and today the trial version has expired and I could not work with my old adobe program, although I pay f

  Hey there, I have a problem, I paid for the creative cloud each month. 30 days ago, I downloaded the new update only in the trial version of photoshop and today the trial version has expired and I could not work with my old adobe program, although I pay for it.

  Aileen,

  Please see suggestions here: FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

  Kind regards

  Guinot

• When I try and load this brush pack I bought, he says "because this file is not compatible with this version of Photoshop.

  Ive restarted photoshop several times and it still does not work im on photoshop cs5 and I did have this problem for a while but again it's an abr file.

  If this problem persists, check that this brush pack is compatible with photoshop cs5-also, it would help a lot to know these things: If your photoshop work on an apple operating system or the windows operating system over which version of the operating system. Other things that could harm this pack brush work are its installed incorrectly or in the wrong place can also reset preferences cs5 help. Finally if what you initially posted is true and or exact-"-when I try and load this brush pack I bought" he says "because this file is not compatible with this version of Photoshop" then this is exactly like a Pack of Brush that will not WORK with CS5.

• Unable to Access Manager device and receive an error message saying "MMC will not work with a version of Internet Explorer prior to version 5.5.

  Original title: control Pasnel: Device Manager

  Trying to open Device Manager in Control Panel, I get the following error message:

  "MMC will not work with a version of Internet Explorer prior to version 5.5"

  OS Vista Home Premium 32 bit SP2

  There are conflicting answers on Google

  1 virus Infection. Recommendation: complete the recovery. I ran several anti-virus and anti-malware program that pretend that my system is clean.
  2. added Version 6.0.0.0 for a registry entry will produce a fix.

  The first suggestion that I consider as a last resort, but don't want to mess with my registry without help.

  Does anyone have experience of this 'mistake' and can talk me through a patch.

  Hello

  Please keep us updated.

  Glad to know that you have addressed the issue. Your efforts to solve this problem is appreciated. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Why do I get a message that think soft is not compatible with this version of Windows?

  My Hp Pavilion dv5 - 1007cl notebook entertainment PC running VISTA Home Premium 64-bit, started to have a problem message saying that think soft is not compatible with this version of Windows.

  C:\windows\SMINST\BLservice.exe is identified as the problem.  Services MFC stopped working is also commonly displayed, related to the software even think soft.

  My Hp Pavilion dv5 - 1007cl notebook entertainment PC running VISTA Home Premium 64-bit, started to have a problem message saying that think soft is not compatible with this version of Windows.

  C:\windows\SMINST\BLservice.exe is identified as the problem.  Services MFC stopped working is also commonly displayed, related to the software even think soft.

  What is 'Soft '?

  HP - why are there so many weird questions like this with the software, they add to their systems?

  http://www.pchell.com/support/blservice_error.shtml

• Error "this graphics driver is not compatible with this version of windows" when you try to install the graphics card

  Title: windows 7 Enterprise 64-bit

  I have hp Pavilion dv6 2138 ca for computer pc laptop and intel hd graphics and nvidia grahics on my windows 7 Home premium 64-bit, but after I've upgraded to windows 7 Enterprise and try to install the graphics driver nvidia. It is said

  the NVIDIA Setup program cannot continue and this graphics driver is not compatible with this version of windows.

  while I chose the latest graphics driver from the hp Web site.

  kindly tell me, that means the sentence above means and what programs and features must be changed in windows? or what steps should be taken to install nvidia graphics?

  answer me

  Thank you

  Hi Hamdullah,
   
  Welcome to the Microsoft community.
   
  "I understand from the description of the issue, you do not know the error' Nvidia graphics drivers are not compatible" when you try to install the drivers. I will definitely help you with this problem.
   
  (1) what is the model of the graphics card are you using?
   
  Method 1: If the NVIDIA GeForce GT 320 M graphics driver, I suggest you to download the Nvidia graphics drivers from the link and check if it helps.
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100095-3&cc=us&DLC=en&LC=en&OS=4063&product=4125893&sw_lang =
   
  Method 2: If the problem persists, I suggest to select the graphics driver and check if you have any driver update available.
  http://www.nvidia.com/download/index.aspx?lang=en-us
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.