If I turned on the lost mode and erased my iphone, password to unlock will be disabled?

Similar Questions

• Tried most methods still Cant turn on the windows firewall and windows defender

  k... I tried a few methods now to go into services and in the confirmation of order... Security Windows won't let me turn on the firewall or Defender on vista Basic... hit me with a message saying due to a firewall problem undefined caanot screen settings... This seems very serious please help

  Original title: tried most methods still Cant turn on the windows firewall and windows defender... sounds SERIOUS! Help

  An Antivirus is a fundamental need for security to prevent malware being installed.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  For an Antivirus, install one of these free AVs (installation more than it will cause problems).

  And first of all remove any AVs expired may still have installed:

  Microsoft Security Essentials:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Avast Antivirus:

  http://www.avast.com/free-antivirus-download#TAB4

  See you soon.

• Lost password: I recently had to do a restore to factory on my computer dell laptop. It went well until he took me to the login screen and I entered my password is not working

  I recently had to do a restore to factory on my computer dell laptop. It went well until he took me to the login screen and I entered my password is not working. I can't get past this login screen. I have seen a lot of messages that say to insert the disc of vista and re - install. I tried to do, and nothing happened when I put the disc.

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• My wife is the administrator user and she forgot her password and she did not save what we can and there are only standard users on this PC, what can we do?

  My wife is the administrator user and she forgot her password and it does not back up and there is only standard users on this PC, what can we do?

  If your wife was using his account with "computer administrator" privileges, and then use the built-in account named "Administrator".

  By default, the built-in account named "Administrator" doesn't have a password.  If you have XP Pro, you can access the administrator account (with no other connected users) Welcome screen by pressing CTRL + ALT + DELETE twice to bring up the "classic" logon window  Enter the administrator user and leave the password empty box.

  In XP Pro or XP Home, you can access the administrator account by restarting mode without fail (repeatedly press F8 to leave immediately after the computer starts / restarts; if you see the Windows logo, you waited too long and you will need to try again).  Once Windows starts in Mode safe mode, the administrator account will appear on the Welcome screen.

  Once you are in the administrator account, go to control panel > user accounts to reset the password of an account with "computer administrator" privileges or create a new user account with privileges "computer administrator."

  If the password that you lack to the built-in, ' administrator' account politics of Microsoft for these forums forbid us to provide you with any information that might help you to bypass this password.

• If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files?

  If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files? drive C whereas the partition that has the operating system and drive D is the lenovo drive that has all the drivers lenovo and all those. Did I lose my files?

  Yes, the collection clears all of the C drive and you will lose your files. The solution would be to backup regularly to an external HARD drive and after the key one to also restore the files from the external hard drive.

  This has been answered before, if you do a search for "key recovery" it appears among the first results.

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/will-i-lose-my-files-if-i-do-one-key-recove...

• I'm about to buy Resident Evil 5, the PC version and I want to make sure it will work on Windows 7.

  I'm about to buy Resident Evil 5, the PC version and I want to make sure it will work on Windows 7.

  Worked for me on Windows 7 64 bit Home Premium edition. Enjoy. This is a pretty decent game that I guess.

• I need to upgrade the CPU, motherboard and RAM in my machine. Which will impact my Activation of Windows genuine?

  I need to upgrade the CPU, motherboard and Ram in my machine. Which will impact my Activation of Windows genuine?

  original title: can I put my machine after GWA?

  It's a Genuine Windows Kit which is what you would be considered a retail license. In other words, that it is transferable to another computer, which means you have the right to support directly from Microsoft.

• I accidentally turned on the incognito briefly and after it I disconnected from all of my online accounts and some don't inin back Journal

  I accidentally activated the incognito briefly and he turned his back. Everything worked well for this session. I left my computer in mode 'sleep'. The next time that I used it, I had been disconnected each web account that I have. Most of the accounts I want to log in, but on one of them I get a message that says "Cookies must be enabled to login.

  I went to tools/options/life private and made sure that both tabs 'accept cookies' was clicked (they were)

  I tried implementing history of custom to "firefox will remember the story", but that did not help either.

  As far as I know, cookies are enabled, but I still get the message to turn them on.

  In private browsing mode, you can use cookies as in normal mode.
  
  PB mode means that nothing is saved to disk, you cannot create cookies that last longer than the current session.
  
  No access is possible for cookies that have been created in normal mode mode PB and created in mode PB cookies are deleted if Firefox is closed or PB mode is completed.
  
  PB mode all the cookies are session cookies and expire when Firefox is closed, but you can always block or allow specific cookies based on the default setting.

• You try to run the scan mode and mode interface fpga at the same time is causing errors

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:
  
  Open FPGA interface reference.
  Reserved outside LabVIEW FPGA:  turns The RIO Scan Interface.  You must set the mode Interface FPGA chassis in order to unlock the FPGA. »
  

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

  rex1030 wrote:

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  This should not be the case.  9211 data will not update with each sweep, but you should be able to run the scan faster than 15 Hz without problem.  Do you have specific issues with this?

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  You can try making sure that the chassis is set to mode Interface FPGA and the setting is deployed.  I wrote that article that you referenced says will select the deploy option later and not explicitly speak to deploy the chassis later.  Run a VI with a reference open FPGA vi not automatically deploy chassis settings if you need to do it explicitly.  Try the following steps.

  1. right click on the frame element and select Properties.  Make sure that the Interface FPGA option button is selected. \

  2. right click on the frame element and select deploy.

  3. repeat your VI.

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141

  
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:

  Open FPGA interface reference.
  Reserved for LabVIEW FPGA outside: The RIO Scan Interface is running. You must set the mode Interface FPGA chassis in order to unlock the FPGA. »

  The likely cause of this error is that the setting of the FPGA Interface on the chassis has not been deployed.  If the chassis is still Mode Scan fixed personality bitfile will be loaded on startup and the FPGA will be locked.

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  I'm sorry that you have had difficulties.  Assuming that I'm wrong about the source of your problem, it seems we have to update less than Ko to include the deployment step.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

• turn off the starting voltage and noise stop

  I have Windows 7 Home Premium on my computer and I put it to any noise.  However, I always get this sound weird start (even with the Windows startup sound play unchecked) and I also get sound when I shut down the computer.  How can I do both of these sounds stop?

  Hello

  I apologize for the late response.

  You can try to turn off the sound in safe mode and see if that helps.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• WINDOWS 8 enter "the sleep mode" and not to wake up, necessary reset.

  PC:Samsung np530ub
  OS: Windows 8 pro x 64

  What happens, laptop in sleep mode: off of the screen, drive hard light stop, Dungeon of light wireless on, seeing power keep on... Press the power button to wake the computer nothing happens. have to hold the power button to reset the machine.

  It happened once in all, but now is every time. Cleaning of the NET solution... nothing has worked

  what I've done so far:

  updated drivers

  windows update

  bios update

  turn off wireless and bluetooth
  activate usb bios s3
  the powermagement on devices tab
  power management - see if any device in the way of fashion is "Eve". powercfg-applications
  powercfg - requestsoverride driver \FileSystem\srvnet system
  check the multimedia device sharing (disabled)
  hybrid mode (off)
  disable the fast startup (disabled)
  Powercfg - devicequery wake_armed (return NONE)
  for now I have disabled the quick start and "sleep" mode...

  Hi Leo,

  We appreciate your efforts.

  Have you updated the drivers from the chipset on the computer? If this isn't the case, I suggest you to update and check if it helps.

  Step 1

  Run the electrical troubleshooting and check if it helps.

  a. press Windows + W on the keyboard.

  b. type Troubleshooting in the "search" tab and press enter.

  c. click show all on the left panel.

  d. click Power, will new popup window.

  e. follow the instructions on the screen.

  Step 2

  Delete the current power management and create again.

  Check out the following link to change the plan of power to your needs.

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/power-plans-FAQ

  See the section: how to create and delete a power plan

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Turn off the trial version and install the Version of Cloud

  Before installing my creative business network cloud on my new computer, I installed a Trial Version of the CS6 Suite from Adobe.

  My old computer was working in CS3, but it was irreparably destroyed.

  My new computer is telling me now that my Trial Version has expired. But I activated my Version CC - same user name and password.

  When I start one of the programs in the suite, it gives me the message "trial version has expired - continue the trial?

  I'm afraid that I won't be able to use the Creative Suite, I paid and registered to because Adobe's going to disable my use of the Suite.

  So, how do I get rid of the Trial Version and replace it with creative Cloud version (which I already downloaded, installed and activated?

  And how can I say Adobe I have CS3 is no longer and can not turn it off because the old computer is not accessible?

  See if the following can help:

  Creative cloud returns to the Mode of assessment
  ------------------------------------

  http://helpx.Adobe.com/Creative-Suite/KB/trial--1-launch.html

  For the question of CS3, it shouldn't matter if you are not planning to use again, but if you want to deal with the activation state...

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• How can I turn off the mobile mode.

  I have a 10 nexus, which, with a 10 "screen, isn't really a mobile device. Unfortunately, Firefox is indicative of the web pages that it is. Given this information, some web pages redirect to a short page. Turn on "site office request" does not work since I'm no longer on the site I want and this button is not persistent. So the question: How can I enable notification of mobility?

  Hello

  Please try to change the user agent.

  To change the User Agent string, just enter about: config as an address in the address bar of FireFox, where you normally enter a URL (link). I recommend you keep the original value, you can get when you enter about: in the address bar.

  Now press the right button of the mouse for the contextual menu and select 'Chain' of the menu entry 'new '. Enter the preference name "general.useragent.override", without the quotes. Then enter the new value of User Agent: "Mozilla/5.0 (Windows NT 6.1;". Win64; x 64; RV:25.0) Gecko/20100101 Firefox/25.0 "(sans guillemets)."

  I hope this helps!

• How to turn off the functions zoom and scroll to the touchpad on the Satellite

  Hello.

  Can someone tell me how to turn off the scroll and zoom for the Synaptics Touchpad v7.2 functions.
  Can't seem to do it via the control panel.

  All of the suggestions.

  Hello

  You can do it in the settings of the touchpad.
  You can find these settings will:

  Control Panel-> mouse-> tab advanced-> button Advanced settings future

  Here you need to uncheck the option called use scroll function

• How can I turn off the sleep mode in Apple Watch the temporary?

  Guys,

  My wife is studied for his chiropractic studies and tried to use Apple Watch as a timer so that it checks the patient's pulse, but she is unable to use the watch due to the sleep mode. Plu wake screen is 70 seconds as described in settings. Is it possible that it can disable temporary screen wake up so she's doing the pulse testing?

  Justin

  Version: Watch OS 2.1

  Hi Justin

  It is not currently possible to disable the sleep of the Configuration screen. The longest time that the screen can stay awake without further interaction is 70 seconds (subject to activating first the setting you describe).