If / if not so identified recognizing not Variable

Similar Questions

• Structure of the event - controlled motor not variable

  I have a state machine that includes certain structures of the event. These event structures are used to control stepper motors using an Arduino Mega microcontroller. I'm using labview in 2012.

  The entrance to one of the events is the variable "pour the entry. I want to use it to control the motor speed and direction.

  If I control the motor as shown in the attached image Working.jpg, then the motor functions correctly. If I fix the motor to the steps variable # then the engine moves at the speed set in the right direction depending on whether the entry "pour" is positive or negative.

  However, I want to control the speed of the engine, not the number of steps, with the variable "pay Input". I checked that the values read by the indicator image INPUT_VALUE works do not are of the same order as the specified values, working, by using the "Set Speed". When I connect the value of the entry to the spindle speed of the motors of the Arduino (not_working.jpg) icon, the engine is running, apparently indefinitely at maximum speed. I don't understand why there is a difference in motor behavior between the value provided by these two methods at the entrance to the speed of the motor. I am confused by the present and don't know where to go from here.

  The structure of the event somehow behaves differently when taking a value from outside the structure to this data inside? or y at - it something to do with the opening of the structure on its first loop?

  I have also attached my vi together, even though she may not be the easiest to follow and requires an arduino Mega to run.

  Carlr wrote:

  I have a state machine that includes certain structures of the event. These event structures are used to control stepper motors using an Arduino Mega microcontroller. I'm using labview in 2012.

  The entrance to one of the events is the variable "pour the entry. I want to use it to control the motor speed and direction.

  If I control the motor as shown in the attached image Working.jpg, then the motor functions correctly. If I fix the motor to the steps variable # then the engine moves at the speed set in the right direction depending on whether the entry "pour" is positive or negative.

  However, I want to control the speed of the engine, not the number of steps, with the variable "pay Input". I checked that the values read by the indicator image INPUT_VALUE works do not are of the same order as the specified values, working, by using the "Set Speed". When I connect the value of the entry to the spindle speed of the motors of the Arduino (not_working.jpg) icon, the engine is running, apparently indefinitely at maximum speed. I don't understand why there is a difference in motor behavior between the value provided by these two methods at the entrance to the speed of the motor. I am confused by the present and don't know where to go from here.

  The structure of the event somehow behaves differently when taking a value from outside the structure to this data inside? or y at - it something to do with the opening of the structure on its first loop?

  I have also attached my vi together, even though she may not be the easiest to follow and requires an arduino Mega to run.

  You have a very inappropriate design of "state machine" - even if you do not have same event in more than one of your structures of the event (in addition to time-out), looks that get some of your treatment to go forward until you get something very specific (and in which none of your other user events are being processed).

  I strongly suggest that first set you design of State machine - perhaps follow producer/consumer Design Pattern (events) rather than having everything in a loop, the way you have.  If you keep everything in a loop, you should consider redesign so that you at least allow events to deal with rather than stay in a loop for an indefinite period!

  In any case, in the case where work, you send variable "Set Speed (steps per second)" for engines step by step write vi.  But otherwise, you're feeding 'Entry for' value - are they the same? And to let you know, you send only command "write" step by step when the input value to be paid.

  It's a big mess!  For starters, look at the attached picture, get rid of your structure of the event that has "for the entry" and replace it with what I showed in the picture. (In fact, all your event structures can / must be replaced with a similar logic.) Does not need the event structure in all this, you're just more complicated it must be!

  -DP

  

• Blackberry10 pushwoosh - is not variable: blackberry

  I'm also looking for a solution to this.

  I implemented the plugin pushwoosh on Android and iOS, but the blackberry10 seems to be quite a struggle.

  I followed this link instruction and I had constantly:

  ReferenceError: Can't find variable: blackberry
  

  I realized then that I had to install some plugins... I've added:

  • com BlackBerry.app
  • identity
  • invoke
  • JPPS
  • push
  • System
  • UI. ContextMenu
  • UI. Dialog
  • utils

  Here the variable blackberry was present at that time and also the method push but not openBISPushListener. Then, I get:

  TypeError: 'undefined' is not a function (evaluating 'blackberry.push.openBISPushListener(ops, onData, onRegister, onSimChange)')
  

  When I console.log (blackberry); I have only PushPayload and PushService pressure.

  INFO:

  • Cordova 3.1.0
  • tested on blackberry Z10 device
  • 10.0.10.261 OS version

  Any help is welcome.

  Thank you!

  The API you are referring is a BlackBerry OS (i.e. 5.0 to 7.1) application. From what I understand, PushWoosh is also intended for BBOs.

  The APIs themselves have changed for BB10 and openBISPushListener is no longer used. You can find documentation BB10 here:
  http://developer.BlackBerry.com/HTML5/APIs/BlackBerry.push.pushservice.html#.create

  To implement the push on BB10, you use the WebWorks APIs directly at this time.

• Panel of the ADF does not variable defined in the ADF view object.

  I created a group of ADF, which allows the user to run some simple queries against a database of Oracle is using the view objects ADF and ADF view links and ADF application module.
  One of them asks detailed information of research on a database object (Table, view, or other) to dba_objects. SQL uses a parameter (: P_OBJ_NAME) which has a default value of "departments". If I run the ADF application by herself outside the ADF panel module, everything works fine, he invites me to provide a value for the parameter: P_OBJ_NAME.
  As I said the Panel contains various links to view ADF which one who must prompt the user to provide a value for: P_OBJ_NAME. When I run the Panel he does not invite me to: P_OBJ_NAME, it only uses the defined default value "departments".
  I hope that I have described my problem for everyone to understand. Of course, the question is how to make the Group ADF to prompt the user to provide a value for the parameter: P_OBJ_NAME, my waiting has been the sql of the view object and request module, both are designed to enter a value for this parameter, then the Panel should do just that, but it's not.
  
  Expert you would be most appreciated.
  Thank you.
  Bobby has.
  
  Published by: Babak Akbari, August 13, 2009 08:34
  
  Published by: Babak Akbari, August 13, 2009 11:12

  The instigation of a parameter is a feature that we have built in the ADF Tester - is not a default behavior that you get in your application when you have just placed a VO on your page.
  To get something like that spend the operations under the VO node in the data control palette and drag the operation "Run with parameters" to your page to drop it as a form of parameter.
  This will give your user name a place to complete the setting, then press a button to run the query.

• Showing the number of clicks box - Variable not updated

  I use Adobe Captivate 6. I have a slide in my presentation which is a photograph. All around the photograph, I placed the boxes click with legends of success. Users must click on the areas of photography to identify problems. I want to display a counter to show if they have identified all the clickable areas, but my formulas do not work. Here's what I have:

  I identified a user variable 'count_total' is equal to 0.

  On each click box, the success that I am running the advanced standard action "inc_count_total" which is the expression: count_total = count_total + 1.

  My legend text has the words: you have found items of $$ $$ count_total.

  On the preview, in the text box, I see, "you found 0 items." But by clicking on the boxes click does not increase the total amount. What I am doing wrong?

  Have you tried box to uncheck the 'Pause for success/failure captions' in the box click Properties? This will update your variable on the click, rather than wait until the legend complete to display.

• variable binding does not exist

  SQL > execute dbevendors1a (0,: rc);
  BEGIN dbevendors1a (0,: rc); END;
  
  *
  ERROR on line 1:
  ORA-01006: there is no bind variable
  ORA-06512: at the "." DBEVENDORS1A', line 50
  ORA-06512: at line 1
  

  CREATE OR REPLACE PROCEDURE WEBINST.DBEVENDORS1A ( 
  P_STATE IN VARCHAR2,
  P_RESULTS OUT SYS_REFCURSOR)
  IS
  
  v_sql_text Varchar2(4000) :=null;
  
  BEGIN
    
  
  v_sql_text := 'SELECT DISTINCT v.refvendor_id vendorId,
                  v.vendorname legalname,
                  v.CERTIFICATIONTYPE,
                  v.vendorshortname doingbusinessname,
                  s.naics_id naicscode,
                  (r.addressline1 ||'' ''|| r.addressline2) address,
                  r.city city,
                  o.gender gender,
                  o.officername officer,
                  v.ethnicgroup ethinic,
                  r.state state,
                  TRIM (INITCAP (g.vnlst1)) businessdesc,
                  r.zipcode zipcode,
                  r.telephonenum phone,
                  r.faxnum fax,
                  LOWER (r.email) email,
                  LOWER (v.website) website,
                  v.dbecertstatus status,
                  func_get_naics_desc (s.naics_id) naicscodedesc,
                  func_get_state_desc (r.state) statename
                                                                
    FROM refvendor v,
         refvendor_gf g,
         refvendoraddress r,
         refvendornaics s,
         refvendorofficer o
         
   WHERE     (v.refvendor_id = r.refvendor_id)
         AND v.refvendor_id = s.refvendor_id
         AND v.refvendor_id = r.refvendor_id
         AND v.refvendor_id = o.refvendor_id(+)
         AND v.refvendor_id = g.refvendor_id(+)';
    
        if p_STATE  = '0' THEN  
        v_sql_text :=  v_sql_text || 'AND R.STATE = ''MN'' '  ;
        end if  ;
       v_sql_text :=  v_sql_text ||'  AND UPPER(v.CERTIFICATIONTYPE)=''DBE''  order by vendorId ' ;
       
      -- dbms_output.put_line(v_sql_text);
        OPEN P_RESULTS FOR  v_sql_text Using p_state ;
  END;
  /

  Your dynamic SQL statement is not containing any identifier indicating a variable binding (colon followed by a name, such as: some_var), but you try to bind something to this statement.

  An example of properly using a variable binding in a dynamic SQL statement would be as follows:

  DECLARE
          v_sql VARCHAR2(200);
          v_var VARCHAR2(1) := 'X';
          p_result SYS_REFCURSOR;
  BEGIN
          v_sql := 'SELECT * FROM DUAL WHERE dummy = :some_var';
  
          OPEN p_result FOR v_sql USING v_var;
  
          /* Fetch records */
  
          /* Close cursor */
  END;
  /
  

  Published by: Centinul on April 15, 2011 10:09

• ReferenceError is not found variable blackberry BB10

  This is my code and its does not work I have refenceerror is not variable

  my config.xml file

  
          read_device_identifying_information
          access_internet
      
      
  
      
        
      
  
        
  
      
  
      
      
      
    
  

  ////////////////////////////////////////////////////////////////////////////////////EDIT//////////////////////////////////////////////////////////////////////////////////////////////////////////////////

  I went through this issue but did not help.

  Any help is appreciated

  Thanks in advance.

  Are you sure that you listen for the webworksready event before calling blackberry.event.addEventListener?

• Adding notes to some VM in a folder

  I need to add a description in the field notes of vm... the script will query a data center and export the vm name and the name of the file in a csv file, of what folder is it will enter the description. The issue I'm having is that it annotera the description of the virtual machine to the folder structure of higher level instead of the specified folder.

  #Specifies which folder to target for pulling of Virtual Machines
  $JPfolder = get-datacenter "LifePoint Hospitals" | get-folder "ITS-Information Technology" 
   
  #Sets a Folder Variable
  $Folder = "Test Machines"
   
  #Sets a Note Variable
  $note = "TEST BOX"
   
  #Gets a list of Virtual Machines within the Folder that was identified before and assigns to a variable
  $VMlist = get-vm -location $jpfolder
   
  #Gets the VM's based on the variable from before and iterates through exporting them to a CSV with the relevant columns
  Get-VM $vmlist | select Name,@{N="Folder";E={$_.Folder.Name}} | `
  Export-Csv "C:\vm-folder.csv" -NoTypeInformation -UseCulture
   
   
  #Imports the CSV created earlier and does a foreach with an IF switch to do the Set-VM Action
  Import-Csv "C:\vm-folder.csv" -UseCulture | %{
      If ($_.Folder -eq $Folder)
                                  {Set-vm -vm $vmlist -Description $note -Confirm:$false}
   
  }
  
  
  

  OK, it works

  Try it now like this

  #Specifies which folder to target for pulling of Virtual Machines
  $JPfolder = Get-Datacenter "LifePoint Hospitals" | Get-Folder "ITS-Information Technology" 
  
  #Sets a Folder Variable
  $Folder = "Test Machines" 
  
  #Sets a Note Variable
  $note = "TEST BOX" 
  
  #Gets a list of Virtual Machines within the Folder that was identified before and assigns to a variable
  $VMlist = Get-VM -Location $jpfolder 
  
  #Gets the VM's based on the variable from before and iterates through exporting them to a CSV with the relevant columns
  $VMlist | select Name,@{N="Folder";E={$_.Folder.Name}} |
  Export-Csv "C:\vm-folder.csv" -NoTypeInformation -UseCulture 
  
  $VMlist = Import-Csv "C:\vm-folder.csv" -UseCulture 
  
  #Change the Note field for all VMs in folder $Folder
  $VMlist | Where {$_.Folder -eq $Folder} | %{
      Set-vm -VM $_.Name -Description $note -Confirm:$false}
  

• OfficeJet 6700 test page prints, but not Word or other documents

  I reinstalled my OfficeJet 6700 for my MacBook Pro (OS 10.6) wireless printing when the printer's IP address has changed.  I used the HP installation for re disc - install the printer.  Since then, I can't print Word, pdf, documents etc.  The print job just sits in the queue with the message: "connected to the printer...". ».  I am able to send a test page, however.  I can print wireless from other computers in the House (on Windows).  Can I print using my address hpeprint.com.  Any suggestions?  Thank you!

  Well Yes, we will define an IP address (not variable) from the printer:

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  Finally, restore the print system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Can not access the context in QML property

  So I have an arraydatamodel in the CPP file, I use qml-> setContextProperty (...) to set it up to allow QML to access, the strangest part is, no matter if I put it in navigationPane Page or a container, it keeps saying can't find not variable, but in the same QML in ListView, they can access it without a problem. The other weird part, it is an another QML is able to access it in the tag of the page, the same model.

  By default of the Jun 02 9000 REVIEWS asset:///main.qml:24 09:12:59.416 com.example.IntervalTimer1.testDev_ervalTimer1a7a2c2e2.427733134: ReferenceError: can't find variable: eventsModel
  By default of the Jun 02 9000 REVIEWS asset:///main.qml:110 09:12:59.416 com.example.IntervalTimer1.testDev_ervalTimer1a7a2c2e2.427733134: ReferenceError: can't find variable: eventsModel

  Here is my code

  import bb.cascades 1.0
  
  NavigationPane {
      id: navigationPane
      backButtonsVisible: false
      // Javascript definition
      function udpateTotalTimeLabel() {
          console.log("In updateTotalTimeLabel function");
          var totalHour = 0, totalMinute = 0, totalSecond = 0;
          // To debug javascript object print function
          var print = function(o) {
              var str = '';
  
              for (var p in o) {
                  if (typeof o[p] == 'string') {
                      str += p + ': ' + o[p] + '; 
  ';
                  } else {
                      str += p + ': { 
  ' + print(o[p]) + '}';
                  }
              }
  
              return str;
          }
          console.log("EventsModel: " + eventsModel.size());
          for (var i = 0; i < eventsModel.size(); i ++) {
              var currentEvent = eventsModel.data([ i ]);
              console.log("EventsEvent: " + currentEvent["EventName"]);
              totalHour += currentEvent["EventHour"];
              totalMinute += currentEvent["EventMinute"];
              totalSecond += currentEvent["EventSecond"];
          }
          if (totalHour < 10) totalHour = "0" + totalHour;
          if (totalMinute < 10) totalMinute = "0" + totalMinute;
          if (totalSecond < 10) totalSecond = "0" + totalSecond;
  
          totalTimeLabel.text = totalHour + ":" + totalMinute + ":" + totalSecond;
      }
  
      function onDataReady() {
          console.log("Received DataReady signal");
          navigationPane.udpateTotalTimeLabel();
          newEventSheet.close();
      }
  
      Page {
          id: root
          titleBar: TitleBar {
              title: "Interval Timer"
          }
  
  .....
      onCreationCompleted: {
          navigationPane.udpateTotalTimeLabel();
          console.log("No of EventsModel: " + eventsModel.size());
          console.log("In sheet creationCompleted");
          mainObj.dataReady.connect(navigationPane.onDataReady);
      }
  }
  

  In the PRC

  // Default empty project template
  #include "applicationui.hpp"
  
  #include 
  #include 
  #include 
  #include "CountdownTimer.hpp"
  
  using namespace bb::cascades;
  
  ApplicationUI::ApplicationUI(bb::cascades::Application *app)
  : QObject(app)
  {
      // create scene document from main.qml asset
      // set parent to created document to ensure it exists for the whole application lifetime
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
      // Initialize the Array Data Model for holding events
      this->eventsModel = new ArrayDataModel();
      // For Testing only
      QVariantMap event;
      event["EventName"] = "Event1";
      event["EventHour"] = "00";
      event["EventMinute"] = "01";
      event["EventSecond"] = "02";
      this->eventsModel->append(event);
  
      // create root object for the UI
      AbstractPane *root = qml->createRootObject();
  
      // Registering the QTimer type to QML
      qmlRegisterType("TimerLibrary", 1, 0, "CountdownTimer");
  
      // Setting the access for QML to member variable
      qml->setContextProperty("eventsModel",this->eventsModel);
      qml->setContextProperty("mainObj",this);
  
      // set created root object as a scene
      app->setScene(root);
  }
  
  .....
  
  void ApplicationUI::refreshData()
  {
      emit dataReady();
  }
  

  Thank you.

  The fixed.

  You must call setContextProperty before calling createRootObject.

• Error: Not enough memory is available to process this command

  On one of our servers running Windows 2003 SP1, CFMX 6.1 (6,1,0,83762) we get the following about every other day.
  "Not enough memory is available to process this command." The message only appears on one of the .cfm pages and other .cfm pages are stillaccessable. We have more than 2 GB of available disk space and 1 GB of RAM so I don't think that either of those who are the problem. In order to solve the problem, I just stop/restart CF and then everything works OK. The only thing I know that has changed with the server in recent weeks, it is that the following MS Patches have been installed: MS06-013, MS06-014 and MS06-015.
  
  Is anyone of another experincing the problem and if so, what is the solution. I realize that I could always uninstall patches, but wanted to know if there is another solution before that.
  
  Thank you

  It seems that my problem was related to client variables fills the register. Once I cleaned out the registry usigng the following technical note variables the application worked fine.

  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=tn_17881

  I also installed a client patch for variables.

  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=b3a939ce, "Hot".
  fix for client variables (Article 19590). »

• Browse the bugs of identifier

  With CVI 8.5.1 on Win2K.

  Suppose you have a variable used in 3 different files in your project.

  When you use the go identifier for this variable for the first time after a successful debugging it displays references in these 3 files correctly.

  If you keep this window open in the workspace and continue editing your code and rebuild the project, you lose all the references of the file which is actively displayed in the workspace.

  If the browse ID window is closed and reopened by right clicking on the variable and selecting browse identifier, that they display correctly again.

  You can repeat this problem in your environment? If Yes, what do you think?

  Hi Eren,

  I tried to do it earlier, and I was able to reproduce the problem you describe. It seems that it is not so much the window open, but the last file that compiles CVI which seems to lose the references (most of the time these are one and the same, of course). To retrieve them, you do not have to close and reopen the window - just hit on the control of the identifier in the window.

  I created a bug report (#137735) for further investigations. Thanks for letting us know about this!

  Luis

• CFLock identify anonymous locks and latches

  I'm new to CFLock, but have recently read on staves cflock and variable, etc. I feel that I have a solid understanding of the situation. In the documentation, I found this snipit I'm having problems understanding.
  
  "Lock scopes and names.
  The cflock tag prevented concurrent access to sections of the code, not variables. If you have two sections of the code that access the same variable, they must be synchronized to prevent them from running at the same time. This by identifying the locks with the same scope or name attributes.
  
  Note: ColdFusion does not require you to identify exclusive locks. If you omit the identifier, the lock is anonymous and you cannot synchronize the code in the tag cflock with another code block. Anonymous locks do not lead to errors when they protect a resource that is used in a single code block, but they are of bad programming practice. You must always identify read-only locks.
  "
  
  When they are referring to the anonymous locks, they suggest that you use the name option compared to the scope within the cflock tag option? See the examples below:
  
  < name cflock = "Logoutcount" type = "exclusive" timeout = "10" >
  < cfset application.logoutcount = application.logoutcount - 1 >
  < / cflock >
  
  OR
  
  < cflock scope = "Application" type = "exclusive" timeout = "10" >
  < cfset application.logoutcount = application.logoutcount - 1 >
  < / cflock >
  
  I guess that if the scope and / variable were the session level, I would just change the application to the session.
  
  What I'm trying to get clarification on here is as well, herds must be created using the name attribute or the scope attribute. I can't find much in the way of documentation pertaining to this matter.
  

  I think you're right. After I read your response, I re - read. I missed the sentence as follows "You do this by identifying the locks with the same scope or name attributes.".

  Thanks for pointing it out. Makes sense!

• Creating a power supply Variable myDaq

  Hello world

  Just got my myDaq NOR the other day and just start playing with it.

  I was a little disappointed to know that power supplies were not Variable (i.e. fixed 5V and +/-15V), but that's what I have for not reading the fine print .

  I thought a Variable power supply would be a good pleasure first of all of the project, but have no idea where to start. I was hoping that you guys could give me some advice/point me in the direction to look.

  I intend to use myDaq for mainly breadboarding for laboratories after EE.

  Since the 5V power allows for the most recent shooting, I think it would be the first supply to build.

  Can someone point me in the direction to move forward?

  Thank you!

  -Ernie

  Hello Ernie,.

  Function of the desired output voltage and and currently, there are a few approaches you can try.

  Buffered outputs analog is the easiest method. You could probably get to +/-12V if you choose a small enough margin requirements with op amp and add 20% gain. You would use the +/-15V rails to power op amp (don't forget to consider the tolerance of rail), and you should limit your output to 32 spec my the +/-15v rail. The buffer is essentially a linear regulator, so be careful of the power dissipation of the amplifier at high currents.

  Output currents higher with lower voltages, consider using a switching regulator. There are a variety of topologies based on the input-output voltages. Look for Buck to withdraw to an input voltage higher than a lower output voltage; Boost to intensify; Buck-Boost to step upwards or downwards. There are others, but these are simpler to start. You can use the outputs analog of the myDAQ to inject a voltage error in the feedback from the regulator to allow programmatic output voltage control. Take a look at sellers sites power supply chip (TI, Analog Devices, Linear Tech, National Semiconductor, etc.) for application notes and recommendations from component.

  Another approach is regulatory digital switch command. These provide a detailed and read back functionality via a digital interface to the chip. Google "digital power" for ideas.

  If you need more power, you will need to provide an external power supply or battery, but control could still come from the AO myDAQ or digital interface.

  It can be a difficult exercise, but I hope this help to get you started.

  Charles Y.

• Variables in the function MathScript ode solver

  Hello

  I'm using LabView for awhile and I started using the text tools more. To solve a system of differential equations, there is this very elegant tool to do this in a MathScript node with the ode solve algorithms (for example, "ode_adams"). As the LabView help said, I've defined a function and registered as a ".m" file. I loaded this function in mathscript and solve differential equations.

  Both and so good, but my problem is that I can not all variables in the function. I can only put numbers in the function but not variables. Unfortunately I need to define the variables outside the function in the MathScript node.

  Does anyone have an idea how to manage the variables in this case?

  I have attatched a picture of the function and test VI (LV2014).

  Greetings

  Global variables to solve this problem:

  Solution:

  

  Greetings