If my ipv6 connection says "no internet access" what it dose average?

Similar Questions

• IPv4 and IPv6 connectivity says no Internet access

  My computer says that it has access to the internet but when I use a browser it does not work. Also Ipv4 and Ipv6 connectivity says no internet access, and at the launch of the troubleshooting, it indicates that the DNS server is not responding. So there are a lot of problems.

  Hello

  Internet works with IPv4.

  I can't give a targeted response as you have not provided technical information on how you connect to the Internet and devices that are involveved.

  In general.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  It still does not work, try this too.

  Firewall software.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall Windows Firewall should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly, or uninstall it completely allowing the clean flow of traffic on the local network. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Reset the network stacks .

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP, just replace the command typed with.

  netsh int ip reset

  Restart the computer.

  Jack, MVP-Networking. WWW.EZLAN.NET

• My wireless connection says "no internet access.

  Original title: Network question

  Hello
  I noticed a change in my system. My wireless connection says "no internet access. The other connection, presumably one wired, is OK.
  I have no problem on internet and computer my son who is temporarily connected to the same router is also online.
  But I wonder what can happen to change that, and what I can do about it. I noticed this when a little yellow exclamation point appears on the network icon in the systray /taskbar.

  I spent a lot of time with the guidance of the internet, Cisco install CD, ipconfig and its switches, update drivers for the network adapters, uninstall the card network wireless and relocation, etc.. But the situation remains the same.

  I will link to some images what I mean (hope it works).

  Thanks a lot for your suggestions.

  Jack

  https://SkyDrive.live.com/redir?RESID=BF9482F6B726F60C! 133 & authkey =! AMKjZQs1wxoJ6ac&ithint=folder%2c.png

  Hello methacrylate.

  Yes, you are right. See my response to PML. I guess I got both wireless and ethernet capability all along and didn't understand why.

  (My system is a desktop computer).

  But the problem is solved.

  I appreciate your response.

  Jack

• laptop does not connect to my wireless network it says "no internet access.

  I am not able to connect to the internet using my wireless network, I can connect to other networks, but it won't let me connect to mine it comes up with a message saying "no internet access.

  I called my broadband provider and they said that something is wrong with my laptop.

  What could be wrong?

  II tried to remove and add my network again to restart my lapop in safe mode, and then reinstall the wireless network and I have also restarted my router and laptop but I stil get the same message

  can someone help me?

  Thanks in advance :)

  Reema,

  There are several solutions here and you have not specified what solution you have already tried and did not work. Check the posts here and specify what solutions did not work for your question.

  Additionally, you mention that you tried "installation of the wireless network" in Safe Mode. This means it that you were able to connect mode without failure, but not in the Windows? If so, you should try a clean boot to identify the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer connects to my wireless connection but it say no Internet access

  Original title: my computer connects to my wireless connection but it say no Internet access

  I have windows 7 I don't know that much about computers, so I do not know what information you need to help me, but if anyone can help me get back on the Internet would be great, I have used the computer before and it worked very well my brother and dads computer still works fine in fact my iPod touch but I need my laptop for work someone ' a please help if you need more information I would like to know how I get the info from my computer and I'm going to do.  Thank you

  I rebooted my router also I uninstalled my card wireless on the laptop and reinstalled computer I also deactivated and activated the wireless network connection and now I have a mini port Microsoft virtual wifi, which I disabled it I don't know what else to do

  Hello

  1 did you do changes on the computer before the show?

  2. What is the exact error message you get?

  3. What is brand and model computer?

  Method 1: Turn off the antivirus

  See the following site:

  Disable the anti-virus software

  http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2:

  Follow the troubleshooting steps in the site mentioned below:

  Windows wireless and wired network connection problems

  http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows.

   

• loss of internet connection on windows 7 pro 64. Says connected but no internet access with yellow exclamation point! Help, please!

  I keep losing internet connection, I have windows 7 and every time I connect it to the wireless internet works for 5 minutes, then a little ytellow icon pop up and say its connected without internet access. Its happened to me before and recently started happening to my cpu. I did a FRESH install of windows to see if it can help, but it didn't. IM literally on the point of throwing my processor through the cause of wall, I can't find a solution to this anywhere. Whenever the yellow icon pops up that I have troubleshoot and it indicates the default gateway was unavailable and that fixed it, then I have internet again for about 2-5 minutes and it does the same thing. Ive never had this problem on my cpu and the network has not been changed or anything, so I don't know what that the * could cause this. I literally wiped everything on my cpu and then do a system image to restore too. Ive been messing around with the registry, deletion of things here and there missions that I read, but only thing that happens is losing internet alltogether and must restore from system image. I'm really running out of ideas. Help, please. I have an adapter netgear wn311b wireless pci-express with the latest drivers.

  to detect new updates for network based components on intel:

  http://www.Intel.com/p/en_US/support/detect/?IID=subhdr+dnlds_detect

  You will be asked to download and install active x components.

  After the installation of the small file, click on the "expand all" button

  You can choose to update your components wired network if necessary.

  then re-install your wireless network management software.

  assuming that your wireless network is intact (connected, permits), you can surf the net.

  If the problem persists, troubleshoot more away:

  When the computer is turned off, set again you netgear pci wireless adapter.

  set of antenna for optimal orientation.

  Check if your computer is authorized by your wireless router.

  check the signal strength of your wireless router and the wireless pci adapter.

• Get a message that says no internet access.

  Original title: IPv4 and IPv6 show without internet access.

  Although the network says it is connected, there is no internet access because another computer already has this IP address.  I checked the IP addresses on the other two computers, and they do not have the same IP address.  He should be awarded automatically, and DHCP is enabled.  I got the modem and the router, the modem directly connected to the computer, tried resetting the INVESTIGATION period, restarted five times and I'm getting nowhere.  I'm very frustrated because it seems it should be good - we have never had this problem before.  All computers on our network are Windows 7 and everything work wireless.  Does anyone have a solution?

  Oh dear.  I thought first of all, I want to check if I wasn't wasting your time.  That's what I would have posted if you did not receive it sorted - McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.  See this "criticism" McAfee reviews - some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update you should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  - - - - - - - - - - -

  I also developed a low opinion of McAfee - it took them three goes getting my re-installed McAfee work earlier this year and they had clearly received no training on the specific product [Security Center].

  The problem of update has been the drop of water for me.

  I removed McAfee the correct way:

  1 Uninstall using Control Panel, programs and features, select McAfee, uninstall

  2 then I ran their own tool of suppression - Development - in general, their opinion [above] gives different instructions for the use of the tool and says it '' may '' be used if step 1 is of the problems while the tool itself says made in step 1 and always run the tool later [which was in any case the procedure recommended for ages].

  3 so, I downloaded & installed Microsoft Security Essentials instead.  There are a lot of choices but it normally becomes in the recommended lists and it has decent support.

  Help and how-to

  Center solutions Microsoft Security Essentials

  Contact support

  as well as the MSSE section in forum MS answers Virus & Malware.  In this section of the forum I recognised an important factor which I had not thought of before. MSSE is part of the package which also includes MS Safety Scanner & Defender Offline so my tools for the detection of malware online scan & rootkit are now all part of the same family, and I could go on the forum the assistance for any questions I might have.

• IPv6 connectivity shows no network access

  When I want to access online through a WLAN, shows the status

  IPv4 connectivity: Internet

  IPv6 connectivity: no network access

  so I think that my internet speed is going slower than before.

  I also try on the properties of the network and their IPv4 IPv6 & all are in default.

  now I want to know how, which can enable IPv6 connectivity?

  Hello

  You don't need IPv6 to access the Internet.

  If IPv6 is on or Off should not affect the speed of Internet connection (if at all in some older systems it slows down when it is turned on).

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Connected but no internet access? ... Help

  Hello

  If someone could help me that would be great!

  I rented a House and do not have access to the modem. I have a 2 year old HP laptop. When I connect to the internet it says connection to the internet and internet access. then, when I try to watch a video or anything of that kind, a yellow error sign appears in the signal at the bottom bar. It then says connected without internet access!

  Why is it that / is there a way to fix it? I need to start the work of the school and it does on every 10 minutes and I have to disconnect and reconnect!

  Can anyone help?

  Thanks in advance!

  Hi Helpthisgirl22,

  1. are you using a cable or a WiFi internet connection?
  2 have had any changes made to the computer before the question?
   
  See the methods mentioned below and check:
  Step 1:
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
   
  Step 2:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Hope this information helps.

• Satellite A-C50-1KQ - WIFI is connected but no Internet access

  Hello!

  Today, I bought a laptop TOSHIBA SATELLITE of C50-A-1KQ and my problem is:

  When I am connected to my Wlan status says I'm "connected" to the Internet and everything is ok, but I don't have an Internet connection. With a cable, everything is ok, but not with Wlan.
  My driver for the card is 10.0.0270 (17.10.2013).

  Can U help me pls?

  Siana

  When you open option networks make sure airplane mode is set to OFF, Wi - Fi on IT and I guess that your WLAN is also in the list.
  You have the signal full force and the State connected?

  What happen when you try to open a page in the Web browser?

• Equium P200 status 'connected' but not internet access.

  I have an Equium P200 and finds it difficult to connect to a wireless network.

  I have the wireless key and all the information is correct.
  Status is connected to the network, but I have no internet access and the message is: connection to the local network only.
  I live with two other people who have access, but I can't access the internet.

  How can I change this?
  Thank you.

  Hello

  Please check in the WLan settings if the TCP/IP protocol settings are set to automatic.

  Usually, the WLan router supports a range of IP addresses and assigns an IP address to the laptop of the range of IP addresses.

  You can find this setting here:
  ->-Connection network WLan-> properties > network connections (TCP/IP) Internet Protocol-> properties

  Also, check if your WLan encryption settings are right!

• Connected but no internet access (E1200 with laptop Acer Win 7 x 64)

  Whenever I come back from a stay in a motel, there are problems to be connected again to the House.  This time, I show that connected to the network wireless 2, but no. Internet access connection.  Yesterday, I figured it out and got things, but today it happened again and I don't get it.  See network properties properly, including appropriate security key.  When I ran Win 7 Network Diagnostics, he returned that I didn't have a valid IP address.  I have reset the router and even unplugged for a minute.  All this time, the ' currently logged on: "network in the sys bar icon showed the Summit he was trying to connect my network name to the internet (downstairs, the network showed as connected, probably by a router).  Another thing I did was to support IP services and disable and stop, then after restart it a few minutes.  Nothing.

  But wait!  As I finished typing the last sentence, about an hour after I started the laptop, the first time, I opened center network & sharing once more and suddenly between the name of my computer and the Internet has shown the name of the network, instead of "no internet access."

  So, what could be going on here?  (1) why should he take 50 minutes to make the connection?  (2) why do I have problems every time after the use of wireless network from a motel?  Thank you

  Update: resolved for now.  I started using the safe mode with networking, which required the implementation of msconfig as F8 does not work.  Which required a repair of the system, and then restore it, and finally I was able to follow the instructions at http://forums.techguy.org/networking/950031-cant-get-valid-ip-address.html.  Solved.

• Wireless connected but no Internet access

  I have a new (5 months) Acer Aspire 5732Z which works in Windows 7. Wireless connection shows that it is connected (full bars) but I have no internet access (there is a signal of yellow exclamation over bars error). I have another laptop running Windows XP which connects well to the same wireless router and wireless for Acer worked very well so far. I was on the phone with my ISP and they said, because it shows that the computer is connected to the wireless, they cannot help me. Anyone has any ideas that can help me?

  Thank you. I decided to call my Internet provider again and this rep was able to solve the problem without delay. From what I learned, if you get a representative who was not helpful, call again...

• My network connection shows no internet access, but I can access the internet

  Hardware: Dell XPS 8300

  OS: Windows 7 family

  System type: 64-Bit
  In the network and sharing Center, it is show the connection between the network of Multi and the Internet has an 'X', but I have full internet access.
  Is there a way to fix this?

  Hello

  I understand that you are able to connect to the internet when your computer showing no network connection.

  1. did you of recent changes to the computer?

  I would suggest trying the following instructions and check if it helps.

  Method 1: update the network driver.

  Steps to update of network driver:

  1. click on the Start button.
  2. in the search box type devmgmt.msc, and then press ENTER.
  3. Select the network card device and right click on it
  4. now, select Properties.
  5. in the Properties window, on the driver tab, click Update driver.
  6. After installing the updates, restart the computer.

  For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Method 2:

  Temporarily disable the Antivirus and firewall

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Ethernet or wireless is connected but no Internet access

  My laptop OS is Win 7 64 bit. My laptop able to connect to the internet, but it suddenly can't connect to the internet via the Ethernet or wireless. I tried to system restore and it worked fine, but after I stopped, the problem was took place again. I don't know if because of the McAfee antivirus or window updates because it has some errors (to McAfee) and Skype has been updated before I had this problem (no internet access).

  McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.