If there is a problem with the temperature of my system if I update to Windows 7 Professional 32 bit in HP Pavilion dv6330ea laptop?

Hello

Model No. - HP Pavilion dv6330ea laptop. Check out the link http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&d

I bought my laptop in UK and I intend to improve my system Vista Home Premium 32-bit to Windows 7 Professional 32-bit.

In some forum users have mentioned that.

Users with nVidia graphics card should check the temperature of this device before upgrade.

In this way you will know is it works fine under Windows 7 also.

How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

To do this use HWMonitor (free and recommended) or Aida64.

Q1] what is the minimum temperature / best should have the CPU and GPU, motherboard, HARD drive?

Q2] is that this temperature is sufficient to upgrade to Windows 7? It will create no problems after the upgrade to Windows 7? This is the value of the temperature of my system of CPUID Hardware Monitor v1.22

Motherboard - Quanta 30BC

Temperatures - THR1

Value - 46C (114 F)

Min - 46C (114 F)

Max - 62 (143 F)

Inter Core Duo T2350

Temperatures - Core 0

Value - 41 c (105 F)

Min - 41 c (105 F)

Max - 64 c (147 F)

Temperatures - Core 1

Value - 41 c (105 F)

Min - 41 c (105 F)

Max - 64 c (147 F)

Hard drive - ST9250315AS

Temperatures - Assembly

Value - 48 c (118 F)

Min - 48 c (118 F)

Max - 49 C (120 ° F)

Temperatures - Air flow

Value - 48 c (118 F)

Min - 48 c (118 F)

Max - 49 C (120 ° F)

Please answer that will help me to decide whether to proceed with the upgrade to Windows 7 Professional or not of the HP Pavilion dv6330ea notebook PC

I found a solution to my own post...

Finally installed Windows 7 and noticed that the temperature is low compared to vista.
So would like to inform all users with queries concerning questions of temperature on PC portable Hp Pavilion dv6330ea proceed with the installation of windows 7 and temperature is very low, the startup is fast, ahead of the functions that is good in windows 7 over vista.

Tags: Windows

Similar Questions

  • HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

    "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges.

    HP has a center of service to Puerto Rico, where I live?

    Please tell me there is a solution for this problem.

    In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612.

  • "Failure of the printer: there is a problem with the printer or ink system" message

    I get printer error message on my printer Officejet 6700 Premium.  I'm on a Mac OSX 10.9.2.

    I have reset the printer and I tried to update the firmware by the instructions, but he tells me that the device is busy and won't.  The printer is out of warranty but was hardly used - less than 200 printed pages - UGH!

    What can I do else?

    Hi Embie2014,

    Thanks for letting me know you are using the HP cartridges No.

    HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridge not HP, or filled HP cartridges. If you use genuine HP, the following cartridges no could not solve your problem of print quality.

    A "cartridge problem," "ink cartridge failure," or "Incompatible cartridge" Error Message appears on the all-in-one.

    Printer cannot print black ink or color ink or prints blank Pages.

    This document explains how to clean the print head.

    Thank you.

  • HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

    I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

    It is said:

    "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

    I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

    HP Officejet Pro 8600 +.

    Product number CM750A
    Sequence number {content removed}
    Not under warranty

    Please notify.

    I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
    http://goo.GL/BXDFf

    It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

  • HP officejet 4620 there is a problem with the system printer or ink 1000008 0x6

    PTR does not print page alighn.  keep saying "there is a problem with the printer or ink system 0 x 6 1000008' I turned market several times."  I unplugged.  I remove and reinsert the ink cartridges. I removed and reinserted the paper AND

    I always get the same message!

    This article should help to resolve the error you get:
    http://support.HP.com/us-en/document/c03081973

    Try the steps and tell us if it helps.

    Good luck!

  • HP Officejet 6600: problem with the printer or ink system

    I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

    Hey @popcorn101,

    Welcome to the Forums of HP Support!

    I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

    I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

    HP technical support are available by clicking on the following link:

    Contact HP support

    (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

    (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

    (3) Once finished, click on the 'Show the Options' icon in the lower right.

    (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

    I wish you good luck going forward with this!

  • Satellite A500 - problems with the temperature of the GPU

    The thing is playing Age of Empires online I started having problems with the temperature of the GPU. When you run the AIDA64 the CPU stress test can hold up well, but after 35 minutes the test what AIDA suspended while the GPU fan can't seem to download their revolutions, (I guess that if there was that a rise in temperature would increase the speed of rotation of the fan, don't).

    I consulted the manufacturer of the GPU, nVidia, (the graphic is nVidia GeForce GT 230 M) and tell me to contact Toshiba for other options, since, according to them, the problem is not the GPU.

    Any ideas or suggestions?

    You use your laptop to factory settings?
    Have you installed something that may be responsible for this (non-Toshiba display driver)?

  • I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

    I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

    Have you tried:

    Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Hello there is a problem with the iphone 6 and you do not want to connect to the Apple Store

    Hello there is a problem with the iphone 6 in more you won't connect to the Apple Store.

    Buenas tardes,

    Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

    Then sign out of the iTunes Store and reconnect.

  • HP Officejet 5740: there is a problem with the printer

    Every day the printer (not standby) turns on and shows "there is a problem with the printer. Turn the printer off, then on. "why what is happening every day?

    This problem got solved, later. Although tech hp sent me the ink HPInstant and that they "reset" of my printer, the error message returned in a few days and continues every day. Another call to Tech Support/InstantInk advised me to return the printer for an Exchange (it's 60 miles a way back). We decided to install Instant ink cartridges, as a last resort to resolve the error messages, and it worked. No error message. I put the original ink cartridges in the printer I can use those to the top. Still no error message and this printer now works well. PERSONAL OPINION: When we enrolled in instantink, hp tried to contact our printer via wireless (whatever) and when it failed an error occurred every DAY, after the installation of the instant ink cartridges a connection has been established at hpinstantink have finished the registration process.

  • I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

    I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

    (1) temporarily disable your security/antivirus software

    (2) download iTunes from the official source: http://www.apple.com/itunes/download/

    (3) try to reinstall

    (4) turn on your anti-virus

  • HP Officejet 6600 Guard giving the message there is a problem with the printer or the ink

    HP Officejet 6600 Guard giving the message there is a problem with the printer or ink. We have already tried to turn off then, have you tried unpluging and nothing works

    OK so I solved my problem normally my printer tells me what was low on ink im although there no and homesick, that I had to replace an ink catrige and his works now

  • OfficeJet Pro 6830: There is a problem with the printhead

    There is a problem with the print head.  Or can not find the print head

    This problem just started happening. Everything was ok after replacing the cartridges of printers with HP cartrighes for this printer, printed since the replacement of cartridges.  I followed the instructions given by your troubleshooting solutions.

    turned off and unplugged, removed and replace the cartridges back in, printed on a sheet of paper indicating that the print head was aligned, printed what he needed at the time and now does it again.  I repeated the above instructions and it just keeps saying the same thing.

    Open the link: www.hp.com/contacthp/
    Enter your product number or select Auto detection
    Scroll up to "still need help? Fill out the form to select your contact options.
    Scroll down and click on: contact HP options - click Get phone number
    A file number and phone number will be displayed.

  • After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

    Over the four days, I've lost two e-mail accounts:

    1 * e-mail address is removed from the privacy *

    2nd * e-mail address is removed from the privacy *

    I went to www.windowslivehelp.com

    I filled in all the information and answered all the question. I provided

    the email address where I can be reached: * address email is removed from the privacy *

    But when I click on submit

    "The display shows:" Server error

    500 internal Server Error. There is a problem with the resource you

    can are looking for, and it cannot be displayed' you explain or tell me

    How can I return my email accounts. Thank you and best regards

    B.Okediji sanogo

    {deleted}

    E-mail address is removed from the privacy *.

    Hi Zacheus B.Okediji,

    1. what web browser do you use?

    2. when the problem started?

    The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

    For more information, see the following article:

    Get help with the Web site (HTTP error) error messages.

    If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

    Internet Explorer is slow? 5 things to try

    Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

    You can also visit the following links to support Windows Live:

    "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

    Internal server error when trying to open hotmail

    Hope this information is useful.

  • Problem open attachments in Windows Live Mail "there was a problem with the service Windows Live Hotmail (a matter of temporary network conectivity has nothing to do with your computer)".

    Hello

    In the last few weeks Im facing a problem when I try to open an attachment on my Windows Live Mail Im getting the following message: "there was a problem with the Windows Live Hotmail service (a matter of temporary network conectivity has nothing to do with your computer). Please try again. »

    Please let me know if I have a problem with my email account.

    Hello

    You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

    In addition, take note of the error message that you are referencing, "...". "a network temporary conectivity issue has nothing to do with your computer.

Maybe you are looking for