If windows does not start. If I remove and reinstall windows - do I lose my product key

Similar Questions

• Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

  I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both. This traditional desktop Interface is almost
  identical to the interface of Windows 7. the biggest difference is that
  There is no Orb start clicking to bring up the start menu.

  But note that you can get the ORB start by using one of the many
  third-party programs, are free or very cheap (the classic interface
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.

  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you may have a hard time realizing that it is not
  Windows 7.
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
  I can't address the issue with your games, except to say that
  whenever you move to a new version of the operating system, some of
  which is used to run on the former does not work on the new. And it's
  much more likely with utilities and games with companies
  applications.

• Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Hi rogerk94701487,

  Could you please check the event viewer and let me know the path of the defective Module once.

  How to check the event viewer: Photoshop CC 2015 crashing very frequently

  Kind regards

  Tanuj

• PC runs, but does not start. Monitor, keyboard and mouse with no signal.

  PC runs, but does not start. Monitor, keyboard and mouse with no signal. Pretty much. And when you want me to remove the battery of the bios, or whatever, it seems tight and hard to get out because it is surrounded by other elements.

  All fans work, the power/battery or anything that works I think that, since there is a fan on the right where it is and it seems to work. I remember what happens before, I don't know, but before that, there are many gels. This error below was made before all this happened, but I managed to run f8 and then run normally until it freezes again. Then, after that, it runs but does not start. No beeps etc. The best fans will have plenty of vouches and Bravo to wherever you like me to vouch or maybe send the great service that you provide to administrators if that's even possible, haha.

  Thanks in advance.

  "

  The file is possibly corrupted. The file header checksum does not match the checksum calculated. »

  It is a sign of a lack of food.  Looks like you have a desktop computer?

  Power supplies run about $50.  It is a rectangular box at the corner of the system in which the power supply will from the outside.  It's a pretty standard form in most of the PC and with a little investigation thorough replacements can be found.

  It is usually held in place by 4 screws and can be held in place with a spring clip.

  Most essential, is that you need to buy a replacement with the right number of straight plug forms to adapt to your PC.

  This seems more complicated than it really is and takes about 5 to 10 minutes to do the replacement.

  Look at the power output of the power supply failure and buy a new, more powerful.  New desktop PC usually come usually with a diet under size and what are the causes these failures is too strong a request for devices you have connected.  So, buy one with a higher power rating.  Usually about 500 Watts does the trick.

  If you do not feel upwards to this task, a technician should not charge you much like this.

• Call of duty black ops does not start on my pc and another game in hand is intall correctly

  I have compaq presario pc with processor pentium 4 3.2 ghz, 1 GB, vga 256 MB ram and 32-bit Windows 7...

  but call of duty black ops does not start on my pc and another game in hand is intall correctly...
  Please tell me the solution...

  I'm sure that if you looked at the requirements on the box, you would see that you do not respect the minimum requiremnts to run the game.

  You need at least a Core 2 Duo E6600 or better cpu and 2 gigabytes of memory.

• Windows Firewall service does not start after the removal of Virus

  Hello

  I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
  I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
  I also tried the troubleshooting of Windows Firewall that confusedly says:
  "Windows could not start the Windows Firewall... Not fixed
  "Set permissions for the registry keys involved"... succeeded
  "Windows Firewall service is not started. Not fixed
  "Starting the Firewall Service"... succeeded
  Any ideas would be most appreciated.
  Thank you.

  It seems that I solved the problem by running this:

  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  that I found in a post on this thread:
  http://social.technet.Microsoft.com/forums/Windows/en-us/5366225a-46e7-4D6C-A389-8bd18a5c3aad/Windows-Firewall-damaged-by-Windows-7-antivirus-2012?Forum=w7itprosecurity

• Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either

  Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.

  I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?

  Thank you.

  The afflicted system has a working CD/DVD drive (even an external).

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu, it has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows xp help does not start - unmountable boot volume and recovery console work ethier

  Original title: windows xp help does not start and the recovery console will not work ethier

  the symptoms are used to my windows XP boot it says unmountable boot volume, so I tried to fix it via the recovery console as everyone says but every time I enter fixboot for one of my drives hard /i have 3 I think / it won't work and says unidentified boss so I create another boot and exit area and it does not work so I go back and try fixboot again and it says unknown again after the creation of we know. Same mistakes for chkdsk /r and /p never tried / f but I'm guessing that it won't work ethier. It's like my recovery console won't save the changes it brings to all of my discs hard does anyone have an answer to this

  Hello
  • Will there be any changes made before the show?
  • Did you try to start in safe mode?
   
  You can check these links:
   
  Unmountable Boot Volume
  http://support.Microsoft.com/kb/555302
   
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
   
  If above does not work, I would say to contact the manufacturer of your computer.
   

• Equium does not start after Exchange VGA and motherboard

  Greetings.
  I have a satellite that were replaced VGA & mainboard, but it does not start. There power correctly and power & switch are turned on but there is no image on the LCD or external. HDD led flashes but nothing more.

  I tried a different CPU and RAM modules.

  In other threads with similar problems seems to be a problem with the screws but I tried to remove all the, winding or change.

  Im stuck with this and have need of any kind of help.

  Thank you

  Try this:
  Remove the battery and the AC adapter, wait up to an hour, plug in the battery and the AC adapter and try again to restart the laptop.

  In my opinion, a problem with the motherboard. The new mother is maybe defective.
  You have replaced parts by yourself?

• ix4 - 300 d does not start after factory reset and clear disk - HELP!

  Hi all

  I did a rest from the factory of my ix4 - 300 d. Sellected the quick erase option.

  He is now hooked up with "lenovo" on the screen.

  I've tried so far:

  remove all disks

  No network cable

  RESET button on the back (5 to 20 seconds)

  and a lot of power cable in and out

  removed the battery on the Board for 30 minutes...

  Help...!

  Hello VizBiz,

  If you have tried to start with all the removed drives and NAS does not start, I recommend to contact local support and asking an imager:
  https://Lenovo-AP-en.custhelp.com/app/answers/detail/A_ID/18133/session/L3RpbWUvMTM2NjU5MDgxMS9zaWQv...

• Laptop HP Pavilion 2320DX g4: computer hp laptop pavilion g4 does not start successfully after update and return to windows 8.1

  Hi, I have recently updated my laptop to Windows 10. He had so many problems and I didn't like it at all, so I just returned my laptop to Windows 8.1.  Since then, my laptop does not correctly every time, and the fan immediately starts to work as well. I can start my pc and connect to my home screen each time.  If the tile is moving or light up when I move my cursor, then I know that I can use my laptop for a little while. It can freeze after getting out a good program. Other times when I start my laptop, everything is dead except for logging on my screen. My Windows key on the keyboard does not work most of the time.  If the screen does not respond the first time I turn, as described above, I can't absolutely nothing on my pc. I can't access the search bar by moving the cursor to top right, I can't open the tiles, I can't spend in desktop mode, etc.  Front I upgraded to Windows 10 and downgraded to 8.1 all worked perfectly, because I've updated from 8.0 to 8.1 Windows almost 2 years.  I have a defective battery. in fact I can only use my laptop if it is plugged. My fan is constantly going, but I don't know if it's my loss of battery or what's wrong with my pc now.  I have described my problem in the Microsoft community forum but have had little response that was not helpful. I was told to go to the command prompt and put in DISM: scan now (which also contained letters more than that, but I do not remember all). I followed the instructions and for 2 days, my pc seems to do better. Then he returned to this problem again. I hope you can help me.  If you have additional questions, post here or please email me at [removed personal information]. Thank you!

  DEB

  @DWESTDEWITT,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• Windows Vista Home Premium does not start after mother, CPU and RAM upgrade card

  I recently updated my PC Windows Vista Home Premium. I changed the motherboard, CPU, RAM and video card. When I booted the machine, it has not started Windows. Windows tried to recover, but could not. Is it possible to get this machine to start without doing a new install? The new facility will lose important files.

  Hello

  It's a normal reaction after replacing the hardware that you have replaced.

  The hard drive with the installed operating system contains the old motherboard drivers, etc..

  They must be replaced with the new motherboard, drivers etc.

  You will need to reinstall the operating system and then install the new drivers of motherboard (you should have a diskette of drivers for it), if the new installation does not probably them, that it will not...

  To backup your data > buy a hard drive USB enclosure > put your hard drive in it > plug it into another computer > read and copy your data from it in this way.

  See you soon.

• "Windows Vista Security Center" close browser windows, precise I have a virus, and now no programs will be opened. Windows does not start in safe mode, and all the system restore points have already disappeared.

  Hello

  I have a Dell laptop under Windows Vista Premium. I got it for about three years, and he is upset enough ok tonight. In the middle of browsing the internet, check my email, etc., all but one of my browser windows close at random, and a message appears "windows vista Security Center" whenever I try to open a new window, blocking of the site and to say that the site is dangerous and my system has been infiltrated by a Trojan horse. Then he starts the scan and says that I must buy the full to get everything to work again. I closed everything, since I already have McAfee antivirus and internet security, but it does not, and neither did any other progams. I tried restarting in safe mode to restore a backup point, but Windows does not open in safe mode, rather stick for half an hour in the middle of loading. When I managed to start windows in normal mode, I found that all my past restore points had been erased.

  This happened to someone else, and it is fixable without wiping everything?

  Thanks in advance,
  Emma

  Hi Emma,

  This could be due to a virus on your computer.  Try to make a virus on your computer scan to check if your computer is infected.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Utility profile WLAN does not start after the removal of some tools from Toshiba

  Here, I would like to say that Toshiba software (utilities, entering in laptops) is poor, unstable and mostly useless. I think it makes sense to launch a call to management of Toshiba to stop dealing us with the ugly such software.
  SHAME ON THEM!

  For example: in my new Toshiba laptop utility of LAN/WLAN profile (the program is useful only) did not work. It has not removed after uninstalling some of the Toshiba Utilities, their menu program shortcuts forms and I can also see their icons to the left in the notification area settings.

  In addition, some of the utilities did not start (like Toshiba disc Creator). Also utility Toshiba are very different, poorly described and localized, do not appear in between them and their shortcuts are entwined in the menu of programs with shortcuts to documentation.

  Hey Buddy,

  To be honest I don t understand why people post only the negative side of utilities Toshiba pre-installed you also noticed that they make your (computer) life easier?

  I don t want to count each tool of Toshiba, but they provide useful functions like CD burning, material is diagnosed, assistant LAN/WLAN connection and so far.

  If you don't like it, n no one said that should be used. Uninstall it and be happy with your laptop. :)

  Regarding your problem:
  I put t know why don t tool work harder because you don't l t post the exact name of it, and that the tools you deleted but say you ConfigFree? The program is useful for WLAN/LAN connections then try to reinstall Toshiba page.

• Satellite 2410-504 does not start after you remove RAM module

  Hello

  I need assistance or advice.

  I have a portable Satellite 2410-504 and I was looking for to increase the memory, I am a Novice with computers, I decided to remove the Module that is already in place (to see if I was capable of employment)

  After removing and then returning the Module, then I went to turn on the laptop and Yes you guessed it, NOTHING!
  The power lights are on and the light comes on but the screen is blank and there are no hard disk activity.

  Now, trying to get back on my actions, I have been unable to completely remove the battery but I'm sure that he slipped on the connectors.
  Could I have caused permanent damage or are my actions retreivable.

  Thanks in advance,

  Mike-c

  Hello

  Did you check if the RAM has been inserted correctly?
  Select this check box.
  But of course, the RAM could be damage due to wrong treatment nothing is impossible
  My computer laptop didn t start because one of the RAM died suddenly.

  What you could do is to remove the battery and unplug the AC adapter.
  Then you have to wait a little (one hour) and need to connect the two parts again.
  Then try turning on the laptop computer.