Ignore the condition AVERAGEIF referenced cell is empty?

I'm trying to run an AVERAGEIF function based on up to 3 sets of test values whose conditions are determined by the entries in cells referenced in the formula.

Here is a picture of the table:

Seminar, day and hour are the columns from the drop-down list. Registered average and average archived have AVERAGEIF formulas that use the data in the table another as test values that resolves as true when they correspond to data in the corresponding cells of the seminar, day and hour [example: IFERROR (AVERAGEIF (seminar, Schedule::Registered, $Topic, $A2, $Days, $B2, hourly seminars: $B, $C2),' ')]. This set works fine if I have all three of the cells in the columns of seminar, day and time information, but I would like to also see average which which do not take into account (i.e., what are the averages for what seminar is offered Monday, regardless of what time?). Is it possible to get these formulas to ignore the conditions that are left in white?

Thank you!

AVERAGEIF accept them * and? wildcard characters.  You could try to enter * in the Time column and see if your formula returns desired results.  Without seeing the data format in your time table of the seminars, however, it is difficult to know if you need to make other adjustments to make it work.

For example, you use Date & time format of data?  If so, numbers actually stores a date and time, even if you have a cell that is formatted to display only the time. This can give results, that you are not pregnant if you do not have two cells showing that same time can be interpreted by the numbers as being different, because the part of associated of the date string date and hour is different.

SG

Tags: iWork

Similar Questions

  • How can I use highlighting conditional to assign a cell using the value of another cell

    I would use conditional highlighting on a cell based on the value of another cell.

    For example:

    If K2 is 1, then I would than A4 Green

    Any suggestions?

    Hi louis,.

    This approach is to add a cell to compare your target for:

    Highlight the rule in this case:

    Quinn

  • Bug in the conditional for loop with an array empty

    There seems to be a bug in the loop with a conditional terminal.

    If an empty array is connected to an indexed table auto entry tunnel, a tunnel of output array has an element instead of zero.

    The constant matrix is left empty.

    High loop without the conditional Terminal produces an empty array.

    Conditional down with a terminal loop never true generates an array containing a single element

    Thanks to LabVIEW version 8.5


  • problem with the help of the conditional formatting on a cell that is defined as the percentage

    Hi all

    I am facing a problem with the help of the conditional formatting on a cell that is defined as the percentage.

    I am using beaches for example:

    is equal to or greater than 10% - green color

    5%-10%-yellow

    less than or equal to 5%-color red


    the problem is that keeps the value 10% get yellow color when it should get green.


    i thought that is a rounding issue but when I change the definitions of the cell to learn more decimal places I see this part of the percentage 9.65% and some of them are 10.00% and they are both colored in yellow.

    I also tried to change the way range of 6 to 9%, but values between 9.65% or 5.5% are not colored.


    I really enjoy your help!

    You know the reason and the solution.

    change the format of the column and go or add a column more with decimal and opt for conditional and hide report.

    Thank you

    http://cool-bi.com

  • PivotTable: change the 'symbol' when the cell is empty

    Hello

    If a cell in a PivotTable (in the answers on a dashboard) is empty, then nothing is displayed. Is it possible to change this than for example the symbol - or / is displayed.

    An example:

    The PivotTable

    CONTRIES
    AGE France England USA Japan
    10 35 17 46 23
    20 29 28 49 21
    30 13 26 14
    40 12 21 24 11


    That s what I want for example:

    CONTRIES
    AGE France England USA Japan
    10 35 17 46 23
    20 29 28 49 21
    30 14 13 - 26
    40 12 21 24 11


    There should be the sign "-" in the cell with 30 years and England.

    How can I do this - if that is even possible?

    Thank you very much
    Best regards
    Heidi

    Hello

    If its useful or solved your problem, then you can close this thread... can I have the points also... :))

    knani.

  • Model by default - table cell has no border when the cell is empty: IE6

    Hello

    I use the model: dark blue with the model of report of ratings in the region.
    I have a problem in displaying the result in IE6.

    When a cell is empty, I have white border in my table instead of edge banding.

    Do you know where I can fix this?

    Thank you

    Roseline

    Roseline,

    You must locate the corresponding css file and look for something like it's - t10 is the number of my theme so replace it with your theme

    Th.t10ReportHeader

    TD.t10data

    TD.t10dataalt

    and add the following code to the css classes:

    empty-cells:show;border-collapse:collapse;
    

    Denes Kubicek
    -------------------------------------------------------------------
    http://deneskubicek.blogspot.com/
    http://www.Opal-consulting.de/training
    http://Apex.Oracle.com/pls/OTN/f?p=31517:1
    -------------------------------------------------------------------

  • Still not get the filtering and the SUMIF with visible cells

    Hi all

    I know it is a pain for you people, but I'm really stuck with this problem.

    I tried to use the answers I found in the community and the User Guide, but I have to be closed to this kind of explanation.

    Once again:

    In the column A is a series of dates

    In column B the value corresponding

    In the foot of B line, I want the SumOf only the visible cells that I filtered before.

    So far I have always the sum of all the lines, filtered or not.

    I added another column with a True/False value and tried to use it but get the same result.

    I'm pretty slow, so I guess that I'll need your help once more.

    It is the sum before filtering:

    And that's the sum after filtering:

    I thank you for your time and patience.

    Lopez

    Lopez Hello,

    Table filtering only affects the rows that are displayed. Hidden lines are always included in the calculations of formulas referring to them.

    Your formula, = SUM (B2:B16) summarizes the content of all the B2 to B16 cells, including those that are hidden.

    There are several other functions in the family of the SUM. SUM, SUMIF and SUMIF. ENS are of interest here.

    SUMIF (English: SUMIF) accepts a condition and only adds the cells on the lines which is assembled as a condition.

    SUMIF. ENS (English: SUMIFS) accepts several conditions and only adds the cells on the rows that meet all the conditions.

    For the example stated in your post, must be the form you need:

    = SUMIF. ENS(B; A; "> = 02/01/2016." A; "" < 03/01/2016 ")"

    (NOT tested. The dates should be placed in two cells and these cells referenced in the formula. post a reply with any error message if the formula does not work as written).

    The lines not included in the amount need not be hidden.

    If the formula is inserted into column B, it must be in a line defined as a footer line using the menu item in the same position as the highlight in this screenshot:

    Footer lines can be placed on foot (bottom) of a table.

    Kind regards

    Barry

  • Change the color of cell based on the text in another cell.

    Hey everybody, hoping that I can get some advice. I searched autour and finds only advice exceeded on a previous version of a number.

    I use 3 numbers

    Very simple question, in the hope of a simple answer

    Above is what I want the result to be.

    The "Number" column is a pop-up menu with a list of different text. I wish that the color of cell status change depending on which element is selected.

    I looked in the conditional highlighting, but it doesn't seem to be what I'm after. I would be able to get this working with formulas or a mixture of both?

    Thanks in advance for your help.

    Hi .adams,

    I do not understand the cells that you compare to get a color. It is a cell in the left column or a cell in the right column?

    Please tell us your overall goal: 'what' you want to do, rather than "how" to achieve this.

    More information, will lead to a solution.

    Kind regards

    Ian.

  • How to get the total of the multiple products of cells

    I want to save my money on the balances of the hand for different days of the year and see if I can develop a trend and reduce my expenses. I can easily make a cell inside of my table that tells me how many I have a kind of money (20 of 5 cents, 9 $2, 3 50 $, etc.) for today (aid = Lookup), the day where I'm looking for my document. This can be used to show me a trend, however, if I want to do another column that keeps track of this total, so that I can use it as a reference to a line chart elsewhere.

    My problem is that when I want to many the last row of cells (filled with the types of currency) by their amounts (20, 9, 3), I have to do for each cell, and if I try to fill it, numbers changes the cells I want it multiply so that now the two amounts are multiplied, rather than the independent form and variable amount.

    My question is: which formula can be used to multiply each B1, C1, D1 etc. with the appropriate..., C2, B2 or B3 and C3... etc, so that I can fill and then also for other cells in column N.

    Hi Kasai,

    SUMPRODUCT is your friend here.

    The totals are in column N.

    N2 and filled down: = IF (COUNT(B2:M2)<>SUMPRODUCT($B$1:$M$1,$B2:$M2))

    The IF part removes the calculation of this row if no number has been involved in any of columns B to M.

    If everything has been entered, the IF condition returns FALSE and the calculation of SUMPRODUCT (in "BOLD") is done.

    I noticed that you included a piece of 20 cents in the list in the upper part, which has awakened my curiosity. Is this typo, or is it a country whose currency is denominated in "dollars" which is a coin circulating 20 cents worth?

    Kind regards

    Barry

  • Rock KING how to ignore the outside frame of the license plate

    Hello. I'm doing an OCR program to detect the license plate numbers. However, I am having this problem where I specify the return on investment for OCR recognize my characters.

    Otherwise the program cannot read the characters correctly due to the presence of an outdoor setting on the image (probably OCR is read as a single character).

    Operations I can do to fix this?

    Photo 1: This is when the return on investment is not specified

    Photo 2: After the return on investment is selected manually

    Thank you.

    Hello

    In fact the answer to this question varies based on the other terms of your system. But first, I think you need to localize the position and angle of the plate.

    If we act with the image you shared, you can search the frame of the plate (shape of rectangle) using match game model/geometric model functions, while ignoring the characters inside. After that, you can set a benchmark using the position and angle of it. Then you can select your return on investment and make the system work.

    It's just a suggestion, look at the image above, you should find your way, given all the conditions.

  • How can I ignore the differences between databases when reading data from a database?

    My boss wants me to create a text parser that analyzes the sentence below and executes a SQL query.

    "' get the table field1, field2, field3,..., Manyfield [where to SQL conditional statements].

    This corresponds to "select Field1, Field2, field3,..., table Manyfield where blahblah".

    Since different DBMS have different timestamp formats, this sentence should be changed for each DBMS.

    Ignore the differences is to do anlayzer that converts a certain type of timestamp string to one that adapts to each DBMS complex a text.

    But it seems ridiculous to adopt this solution when there might be an elegant solution.

    LabVIEW Toolkit of DB is not able to hide the differences.

    Does anyone have a better idea that I do?

    I remember having a problem like this when you are working with an older version of an Oracle server. I was able to change the session by setting the 'NLS_TIMESTAMP_FORMAT '.

    This page might be of interest; I found this, when searching for "NLS_TIMESTAMP_FORMAT".

    Database portability: Date and Timestamp columns

    (PS String Format and channel Scan functions work well with the correct date format specifiers. See the link below in my signature for the ISO 8601 timestamp/string conversions)

  • Prevent the child class dependency when the conditional use disable to specify the class in the development environment

    Hello

    I develop an application that I want to run on the normal systems and in real time using LabVIEW Proffesional Development System 2012 SP1

    To control how the application interacts with the user, I created a class that defines the type of user interface behavior that should allow me to have nice dialog boxes when the system is running on a machine windows and no dialog box (or any other friendly code in non-real time) if they sail on a real-time target.

    The parent class is the code that suits the actual time and the class of the child is the one with dialog boxes.

    To control the class of which it is responsible, I have a structure conditional disable. It works fine when the application is built in an executable or executable file in real time, but the problem arises when I want to use the code during development on the target in real time.

    I think that with the application under a target in real time (RT PXI), the proper case of the conditional - disable is enabled for the parent class is used, but the child classes are also listed under dependencies - I pressume it's because they exist on the block diagram in the case of persons disabled conditional turn off the diagram.

    This means that I can't deploy the code on the target in real time as it is unhappy with the class of the child code - even if it will never run.

    To save the poster my real project, I created an example with a Parent and child class and a flag to disable conditional 'class' to illustrate the problem.

    If you run Test.vi, you will see that the child class always gets locked (i.e. is addictive) while running even if it is not called.

    So - basically my question is: is what I can do about it or will I enough to disable it with conditionals and simply put the constant to correct class on the block diagram in the tests?

    Thanks in advance

    John.

    I feel your pain.  I came across something similar some time back.

    Apparently official NOR position is that you have to put a conditional structure of Disable IN EVERY ONE OF YOUR CLASS live.  In the Windows screws, you simply have a case of empty disable conditional with the windows code in another case and vice versa on the RT.

    I also much prefer the method you describe...

  • Ignore the validation of attribute in adf levels

    Hello, I use JDeveloper 12.1.3.

    I have a simple question.

    How to ignore the validation of the attribute levels in the adf, when I pass between tabs?

    I can't use immediate = true, because then I wouldn't be able to commit the changes.

    Thank you all.

    Concerning

    You can try to make the the showRequired = true required = false and carry them out manually, validation in your beans for each of the fields that you want to be mandatory.

    I had a problem similar to yours. I think (and I said) that it is not a good practice for autoSubmit = "true" in many areas. You even not the disadvantage that if you try to change the fields too fast that they be emptied... As well, the view is suspended for a second while submitting. This should be a no-no for forms with several fields.

  • I had several programs in Windows XP I can't access Windows 8, specifically the Solitaire and Free Cell games.

    I had several programs in Windows XP I can't access Windows 8, specifically the Solitaire and Free Cell games. I have uploaded them to Google Drive, but have compatibility problems. What can I do?

    Original title: program programs Application Applications compatibility

    He belongs here and serves no useful purpose. It is a peer to peer forum in which we come to get help with a problem or to help someone else with theirs, not to listen to some drivel by some small individual whose existence is made up of one complaint after another. Grow-up, things change, and no matter what you think that the old ways are not the best. If you have something useful to add to the end of things otherwise I will totally ignore you as I do everyone free service. anything not that you said above is anything but a mug shot and does nothing but show your ignorance.  Hope this helps and if you need any additional aid station and we will be happy to help you.

    The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

    "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

  • How do I ignore the blanks/Null in mapping FDMEE

    Hello team, I have a file source format below.

    In it so I need to ignore the lines which is having the entity as null how do I design the data mapping in FDMEE. Please notify. I have need the lines with null to go on the target system

    Account entitty year project pc SupportSystem Site
    645WE2014growthPc1100BSSSite1
    6552014growthpc1230Site1
    656PEUT2014growthPc1234BSSTraining3

    Thank you

    Mouline

    Hello

    Do not export data, you must set the target value to IGNORE

    To capture entities null (empty), you have the mapping, but it works only with whitespaces channels not empty...

    However, you have several ways to achieve what you want according to your needs. For example:

    -Option 1: create a script to import then empty entities are imported as white space and then use the mapping of (see details in the Administrator's guide) to map to IGNORE

    -Option 2: create mappings for the valid entities, and then create a mapping rule that maps to IGNORE (this mapping rule is performed last)

    -Option 3: skip lines with an empty entity in the import format. Then these lines will not be imported in FDM so you don't need to map...

    -The other options...

    I hope that clarifies.

    See you soon

Maybe you are looking for