Illustrator Story Boards and sizes?

Similar Questions

• Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  k,

  It looks like you might be haunted by the Align attribute to the ghost of the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• Due to a hardware problem, I had my logic board and replaced hard drive. How can I do to reactivate older versions of adobe products? (Acrobat, Illustrator and Photoshop)

  Due to a hardware problem, I had my logic board and replaced hard drive. How can I do to reactivate older versions of adobe products? (Acrobat, Illustrator and Photoshop)

  Old version download apps:

  CS 6:

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  On the same page, you will have the possibility to download other versions.

  

• Hi, is it possible in 2014 CC Illustrator to increase the size of Panel of police find so I can see the full name of the police? Thank you

  Hi, is it possible in 2014 CC Illustrator to increase the size of Panel of police find so I can see the full name of the police?

  You can see on the screenshot below fonts with longer names are not displayed, I know you can see an excerpt from the police, but that slows down and me its not practical!

  Concerning

  

  Hi emiltsonev,

  We do not have an option to increase the size of this Panel. You can use the slider on the right to scroll.

  Thank you

  OM

• Enter the location and size of box guide

  I know how to get the location and size of a selected object.

  var artWidth = artGroup.width;
  var artHeight =artGroup.height;
  var artLeftPos = artGroup.pos[0];
  var artTopPos = artGroup.pos[1];
  

  but all my models have only one box and that the box is always centered on the artboard, but its position is upwards or downwards to the Center.  Is it possible to check if the box has been changed to guides on the view menu. View > Guides > Guides to do, it of what I'm talking about after removing the color of background and outline of your object to ensure that it can be used for sizing and position of your work, but do not print.  I need something like below who will go through all elements of the path until the element is a guide is so it makes the variable myGuideBox for me to grasp its size and position so that I can double check it against what the user initially selected.

  I read through the view of the object and the site http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/illustrator/sdk/CC2014/Illustrator% 20Scripting % 20Reference % 20-% 20... but I can't find anything to say whether or not an object is a guide.  If it is not possible, this means that I'll have to find another option, and I'm open to ideas.

  for (i=0;i<docRef.pathItems.length;i++)
  {
       if (doc.pathItems[i].guide == true);
      {
           var myGuideBox = doc.pathitems[i];
  }//end if
  }//end for
  

  Thanks in advance for any ideas or pointers that you can give me.

  Zantcor wrote:

  n ' have only one box of guide

  -go through all the elements path until the only element that is a guide is located then it makes the variable myGuideBox for me to grasp its size and position

  If you say that there is only 1 guide in the file, then maybe the following simple example will work:

  function getGuideBox() {
      app.activeDocument.selection = false;
      var doc = app.activeDocument;
      var p = doc.pageItems;
      for (var i = 0, l = p.length; i < l; i++) {
          var pID = p[i];
          if (pID.guides == true) {
              pID.locked = false;
              pID.selected = true;
          }
      }
      var guideBox = doc.selection[0];
      var wNum = guideBox.width;
      var hNum = guideBox.height;
      var xNum = guideBox.position[0];
      var yNum = guideBox.position[1];
      alert("GuideBox Data:\nWidth: "+wNum+"\nHeight: "+hNum+"\nX Position: "+xNum+"\nY Position: "+yNum);
  }
  getGuideBox();
  

  I hope it's useful.

• I accidentally hit the wrong command on my key board and now forms are white and black outlines. How can I change the forms to their original colors?

  I accidentally hit the wrong command on my key board and now forms are white and black outlines. How can I change the forms to their original colors? (I do not change the color of shapes, I think that I just changed it in some weird setting)

  Figured it out! It was in 'outline' mode I went to view > preview and are back to normal.

  How can Illustrator Adobe - I get out of the preview display? -Graphic design change battery

• HAVE CS4 - stopped allowing me to grab the handles and size text box or picture etc.

  It used to work fine, then one day, he stopped allowing

  I manually, drag and size of objects, etc. text boxes.  I reinstalled Illustrator, restarted, still the same on all the

  new or existing files. Help, please.

  Try view > show/hide area delimitation. Its a toggle Cmd (Ctrl) - SHIFT - B that some software use "BOLD" fonts is false.

• iTunes 12.5.1.21 not remember iTunes position and size

  Update iTunes 12.5.1.21.

  Win 10 (v1607) does NOT remember iTunes position and size.

  My system uses two monitors with extended desktop. I would like to put iTunes on the 2 left / top of the page. But after the closure and revival, iTunes always appears in the center of the screen 1 and the original size when updating. She also can't remember the last page of the articles that appeared, for example, Podcasts, applications, etc. When iTunes has been closed. Instead always defaults to the page music.

  Also on launch a screen "Welcome" iTunes with No thanks / OK buttons on bottom is displayed momentarily before displaying the page of music. There is not enough time to read what this screen offers. Looked in the menus to try to find this page to display... no luck.

  Anyone else having these issues?

  Same problem here.  Very annoying.  Each time is like the first time, which is great when you talk about sex, but not when you run iTunes.  All versions up to now has been able to hold its window size and position, but not anymore.  I also find the interface is very slow to boot.

• Font and size: how to change the default (for outgoing e-mail)?

  I'm going to 'Write', I put it in the address, etc., and when I start typing my message, the font size is tiny, the font is Times, although sub
  Format - fonts, I see Helvetica and size is extra-large. Sometimes using "fixed width" gives me a better font size. I then choose a font of
  "Choose a font", and I'm all set. However, I have to go through the same procedure for each e-mail! Help!

  Try changing the settings in Tools - Options - display - (tab) - (article) fonts & colors - formatting, enter a default font and the font size to use when NO other formatting is specified.
  Now press the button on the same line,
  in the next window, make sure that the police and & the font size you want entered in the selection boxes.
  Under the control of the police - the two boxes ticked? Your choice.

• WHY do we have a % * # update every 2 weeks until persists 1 really bad bug (fonts and sizes change randomly when entering)?

  Y at - it sort of STOP TB, to send updates every two weeks (and BTW this slowed down TB / crashed more and more in the last two months) until they have fix this really irritating bug to randomly change the fonts and sizes when you write an email? Outlook does not, Apple mail, didn't do so to stop spamming and begin to address the real problems for a change!

  Nothing of the sort, overall we are very poor typists. How can I know what others are doing? I do it myself. I touch type? Not and nor do the vast majority of people. Even those who say they do.

  How can I know something about the issue? I've seen other people complain and the results are similar to the serious, where my advice. In my opinion, that most of the people with problems touch with appearance and no content is also to experience. Most are apparently not aware more you are trying to improve the appearance of your mails using the fonts and sizes the worst they look almost invariably to the purchaser who does not have the police fancy you selected.

  In my opinion, the code that goes into the composer's poor by the standards of today and the suffering of his age and bitrot. Most of it is written in C++, and most of those who work on Thunderbird are people of Javascript. I do not worship at the altar of God any Mozilla and I have few illusions. Either on the code, program or the people who use it. Or at least I like to think so.

  What I hold as a hope, it's a complete rewrite of the composer happens, or at least people who can make the scriptable code so many of these things can be upholstered.

  Your comments about Microsoft releases and past years their fixation are neither correct nor helpful. Unfortunately the back doors and new threats are discovered almost daily. The software industry overall solves the problems as soon as they can and issues a patch. Automakers weigh the cost of litigation related to failure (how can die, be injured) against the cost of a recall. Sorry, but as far as I don't like regular patching, I prefer the approach of the automotive industry.

• After you have installed windows 10, I can't use apple wireless key board and mouse magic. any solution

  I am facing a strange situation. I used Win7 on BootCamp. Last week attempted to upgrade to Win10. After the upgrade is perfect, I could not connect to the wifi or wired internet. called the Apple support, Windows supports, no one would help you. Downgraded to Win7, after decommissioning, apple wireless key board and mouse magic does not work. Called Apple support, after nearly 90 minutes of interaction with them, ZERO, no solution result. Apple support told me that an Apple engineer will call me at my appointed time. A call came, but no one answered.

  So, today did a clean install of Win10 through BootCamp. All right, BUT I still can't use apple wireless key board and mouse magic. Can someone help me with this situation? Apple & Microsoft support engineers have failed to help out me. Thanks in advance.

  Have you installed the Boot Camp Windows Support software?

  If you do not see some Mac functionality if you are using Windows on your Mac - Apple Support

• measure the angular speed, angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition

  How to measure the angular velocity, the angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition?

  There is a single channel data acquisition code which measures the angular velocity, angle and flexibility using a gyroscopic sensor breakout board and acquisition of LabView data attached to this, I need a help to creat two-channel data acquisition code?

  Hello

  Attached is a vi that you can use in order to read the measured angular position of an encoder.

  If you need more examples on the tasks that you can develop with NOR-DAQmx and LabVIEW, you just need to open LabVIEW and click Help > find examples > Input and Output material > DAQmx > entry counter.

  Kind regards

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• Draw the dots of different colors and sizes

  Hello

  Is it possible to draw several dots of different colors and sizes?  Small size would be green, medium-sized yellow and big sizes Red?  I tried to use XY and field Multi-XY, but I'm not having much luck.  Looks like there may be a way to do it with ground Multi-XY if I use Plot XY cosmetics and size Scatter Plot cosmetic, but I can't find anything on the functioning of these two options and it did not have a lot of sense to me when I am just playing with it.

  Thank you!

  Gerd has the right idea.

  Say you have 3 ranges: < a,="" a-b,=""> B

  You check each data point as it came, to see who will he fell in.

  Build 3 separate tables and cluster each a vs a table 1 d of the corresponding X values.

  Then if you pass these 3 groups to a XY Chart, you get a graph showing the colors and different styles for each range.

• Outlook express settings of type and size how to configure

  How to change type of front and size on outlook express

  You can find these settings under Tools | Options | Dial.