Im trying to install windows XP on a hard disk nine and im getting a blue screen Stop: 0x0000007E

Similar Questions

• I am trying to install a scanner treated after installation failed previously and I get the message "Could not open key".

  Could not open key

  How can I give me access to a registry key?  I am trying to install a scanner treated after installation failed previously and I get message "could not open key: UNKNOWN\Components\AFlE7E2767BA2BB41B713A00FB8FACC4\4D7CB2A83D7A5D543B2D9374815CC314.» Verify that you have sufficient access to that key...

  Click Start, type: regedit

  Click with the right button on regedit

  Click on run as administrator

  Make sure that you back up your Windows registry database before you try:

  How to make a backup of the registry in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• the pc switches work and I get a blue screen when the driver is installed

  INSTALLATION DRIVER CAUSES BLUE SCREEN AND SWITCHING TO AND SUITE

  I have re-installed windows xp pro several times and everythong is going fine until I install the drivers from the disk. pc switches work and I get a blue screen with a RECOVERED FROM A GRAVE... message. I also have a xp(not professional) of windows disk, it works with the drivers, but the pc doesn't seem to work as well. I want to run xp pro version, that's why I bought it. Help, please.

  It makes no difference, what version of Windows XP, you install, it will make no difference to his execution, or use. (with the exception of you want to join a domain)

  If your PC boot after installing winxp pro, visit your PC manufacturers site, or the site of the motherboard and to get the latest drivers for Windows XP a go from there

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• I am trying to install Windows 7 on my hard drive, but the installer tells me that I need the driver "Promise Technology Inc. Ultra IDE Controller".

  I'm trying to install Windows 7 on a (40.1 GB) partition on my hard drive, but the installer tells me that I need the driver (Promise Technology Inc. Ultra IDE Controller.  I searched the Internet and tried several, but no results.  Can someone point me in the right direction.  I have a box to open with Technical Support, but not a lot of help out there.

  Thanks in advance

  Joe Franklin

  original title: installation of Windows 7

  Hey Joe,

  I suggest that you visit the gigabyte website for your region (and/or the site global http://www.gigabyte.com/?f=g ) and check your motherboard for compatibility with Windows 7.

  The problem you are experiencing would imply that Windows 7 has no native driver support for your disk controller, so if Gigabyte don't have drivers that you are locked unless you buy a discreet disk controller that is compatible Windows 7.

  Please mark this as useful or response if applicable.

  On the other hand, you have this posted in a forum of Windows XP when it is really a problem of Windows 7.

  Tricky

• Installed the network updated drivers hp support page now I get the blue screen of death

  Installed the network updated drivers for my laptop hp support page and now I get the blue screen of death a few minutes of Internet usage.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5171...

  I can reboot the computer, but it only works for a little bit before again becoming the blue screen.

  I tried to download and reinstall the hp 8 drivers network twice now. (Product number: QJ793AV-#ABA)

  I am running windows 7 (x 64) and downloaded all the updates as well.

  Any help would be greatly appreciated.

  I made an another windows update and seems to be ok for now

• Error while installing windows Xp on my E Aspire 13 ES1-311-C4VK. Error is STOP: 0x0000007E.urgent pls help

  I tried so many times to install windows xp on my Aspire E 13 ES1 boot cd - 311 - C4VK.Xp first, then load something. After that, it shows the error:

  STOP: 0X0000007E (0XC0000005, 0XF73B9D66, 0XF78D9EA0, 0XF78D9BC)

  ACPI.sys - address F73B9D66 base at F73AE000, DateStamp 480252 b 1.

  I need urgent help.

  And another thing, I want that it is not possible to change the sata ACHI to ide mode. Isn't it possible to change?

  Why windows XP?

  It is not longer supported by Microsoft and other SOFTWARE, and it is the best OS to have viruses, rootkits and other infections.

  you will be also problems of drivers/hardware as acpi.sys

  If you need windows XP for some old software, try to use a virtual machine or buy a second hand laptop.

• Cannot install Windows 7 on a hard disk of expenses

  Hello!

  I am installing a new hard drive in my HP desktop computer. He had a SMART hard drive failure and so I bought a new hard drive for replacement. I have a disc for Windows 7 and have tried to install it on the hard drive. However, it is to say it doesn't have the drivers to read the disc. I have trouble finding this driver, and attempts to use a flash drive with the operating system with the same problem. Can I get help?

  I don't know much about computers, but I can try to obtain any other information necessary.

  Hello Roan,

  Thank you for your response.

  I appreciate your efforts and your time.

  I suggest you try using the steps described in this article and check the issue.
  Reference:
  Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disc
  http://Support2.Microsoft.com/kb/952951

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps.

  Please keep us updated on the status of the issue.

  Thank you

• Windows 7 clean install fails with ACPI.sys and error blue screen stop: 0x0000007E.

  I'm trying to do a clean install of windows 7 Professional (32-bit) on my laptop ASUS X61SL. Initially there was Vista Home Premium (32-bit) running on this laptop.

  After the start of the boot and windows 7 by loading files and starting windows comes the blue screen saying:

  STOP: 0x0000007E (0xC0000420, 0x8EB256C6, 0x8A386640; ox8A386170)
  ACPI.sys - address 8EB256C6 base at 8EAD7000, Datestamp 4CE78F21
  I tried an update of the BIOS already and a full erase of the disk which has been recommended by the ASUS support. Nothing worked, and not even the ASUS support has other ideas how to get Windows 7 to run.

  OK, how much RAM have you?

  I found this information:

  However, I remembered seeing something on the Internet about Microsoft 64-bit being unhappy with 4 GB of ram during the installation process of the systems... .then I got 2 GB of ram and the installation went OK! I will give the memory later.

  Source:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/a-clean-install-of-win-7-fails-with-acpisys-and/edca086c-D798-4b78-805d-301dcc8535a0

  I know - you try to install the Win7 SP1 32 bit only, but you can try it.

  LC

• Is it possible to install Windows 7 on external HARD disk

  That is the problem.

  A friend with a Toshiba laptop (do not know the model right, but probably with win7 - 6 month old machine) has a problem with the internal hard drive.
  He crashed and his does not work.

  It has the toshiba recovery CD and an external hard drive.
  Is it possible for him to install win 7 on the external hard drive?

  (the easy medium woyld be buying a new in-house but for the next 2 months because of his work that it is impossible).

  Hello

  I don t think that it would be possible to install the Windows 7 external HARD disk.
  You should replace the internal HARD disk and should put the new HARD drive in the laptop.
  Then you should be able to install Windows 7 on the new HARD disc.

  Good luck

• After the updates of Windows a blue screen * STOP: 0x0000007E

  After running only a full windows update tonight. When the machine booted up back came to a blue screen with the message next stop:

  STOP: 0X0000007E (0X805C49B8, 0XF7A742B4, 0 X 80000003, 0XF7A73FB0)

  After running through the diagnostics on all very well control, e.g. hard drive, memory, video, hardware, etc...  I can't start in safe mode, a previous state, whatever it is.

  I'm at a loss complete as to what I can do.  Any help would be greatly appreciated.

  Thank you

  Mark

  After running only a full windows update tonight. When the machine booted up back came to a blue screen with the message next stop:

  STOP: 0X0000007E (0X805C49B8, 0XF7A742B4, 0 X 80000003, 0XF7A73FB0)

  After running through the diagnostics on all very well control, e.g. hard drive, memory, video, hardware, etc...  I can't start in safe mode, a previous state, whatever it is.

  I'm at a loss complete as to what I can do.  Any help would be greatly appreciated.

  Thank you

  Mark

  UPDATE:

  I ended the disc of Windows running in the repair mode, and it fixed the problem.  Fortunately, no files have been lost!  And I started a return costs upward as well ;)

  I hope that the update will be fixed soon.

• I lost the administrator password and I trie to install a new xp OS, and then displays the blue screen stop error 0x000007e

  My pc has the administrator password, I don't remember and I trye install new xpOS pc will not let me install what can I do for the eraser to erase the password

  Hello

  KB330182 article on 'error 0x000007e stop' from Microsoft are:

  "How to troubleshoot a Stop error 0x0000007E in Windows XP:

  http://support.Microsoft.com/kb/330182/en

  try to look if this could help you.

  LC

• I can't create partitions in unallocated space when trying to install Windows.

  problem installing Windows

  I tried to install windows 7, then the hard drive selection window, it shows 2 spaces unallocated and I can't delete or create a new partition of them and niether I am able to install windows .please help

  Hello

  You can erase your entire hard drive with command prompt from booting from the Windows installation disc and run the utility "diskpart", clear full hard drive, make new partitions and install the operating system.

  (a) start the computer from the Windows installation disc.

  (b) click on 'Next' at the first prompt.

  (c) click on "Repair your computer."

  (d) click "next".

  (e) click on "Command prompt."

  (f) type "diskpart" without the quotes, and then press "Enter".

  (g) list disk 'type' without the quotes, and then press "enter".

  (h) type "select disk 0" without the quotes and replacing '0' by the actual number of the car you want to erase.

  (i) type "clean" without the quotes, and press "Enter." The drive is now completely erased.

  (j) restart the computer.

  (k) through the installation of Windows 7 with regular steps.

  I hope this helps.

• If I install windows 7 on a hard drive of all data will be lost?

  I want to install Windows 7 on a hard disk that already has a lot of data (but no operating system) on this subject.
  If I do all my data on this hard drive will be lost?

  Yes, it will probably be to format the drive, the deletion of your data. Make sure that you support first.

• Start Windows Vista blue screen STOP: 0X0000007B error

  When I try to start up the bios screen appears then it goes to the loading of windows and I get this screen.  At first I thought it was a hard drive failed, but then I took the same hdd from another laptop I had, and it still does the same thing.  I tried to install a new copy of windows from the disc, but when it loads the files and will install I get the same blue screen.  I have reset my bios to the default system, I also physically reset the cmos and still no luck.  I have no idea what to do, I'm stuck.  I tried to go to the F8 boot menu and have used all the options and it always leads to this blue screen.  This may be a hardware failure? I take the laptop completely apart and put it back together and still get this blue screen.  Any help would be greatly appreciated! Thank you!

  Brandon

  What computer brand and model?

  Disconnect all devices except keyboard, mouse and monitor.

  Try the last known good configuration.
  http://Windows.Microsoft.com/en-GB/Windows-Vista/using-last-known-good-configuration

  The hard drive is recognized by the BIOS?

  Are their data files on the hard disk, you need to recover?

  Bug check code: 0x7B
  http://msdn.Microsoft.com/en-us/library/ff559218 (v = VS. 85) .aspx