Im trying to print from the reinstall a new wireless router. Printer does not print.

Brother printer. Clear spot wireless. can't understand why printer won't work/print.

Hi John,.

 
1. What is the model of your printer?
2. What is the operating system installed on your computer?
3. you receive an error message when you try to print?
4 are you facing this problem with a particular application?
 
I suggest you to follow the steps in the link and check if it helps.

You too, try to print a test page and check if it helps.

Print a test page for Windows Vista

Print a test page for Windows 7

Tags: Windows

Similar Questions

  • Im trying to get off the load free anti virus, but it does not work

    Im trying to get off the load free anti virus, but it does not work

    Im trying to get off the load free anti virus, but it does not work

    Not enough information.

    Of course - you send messages to a Microsoft support forum and one could assume that you mean that you try to download Microsoft Security Essentials, save it to your computer and install it then - but even with this hypothesis - another that knowing you have Windows XP (probably Home edition, but possibly professional or Media Center editions - and probably more than 32-bit not 64 - bit)-we do not like you think we should knowledge.

    Regarding AntiVirus - free are very good: Avira, AVG, Avast

    You could spend ~ 60USD during two years of eSET NOD32 AntiVirus (not more - just AntiVirus.)

    Get one - save on your computer (do not install immediately.)

    Reset...

    After a reboot - install your new product and update after the installation.

    Run a full scan with it.

    Then - just to make sure you started on the right foot...

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner. Remove everything it finds.

    Reset.

  • Receiving the message "Wireless association failed because Windows did not receive response from the access point or wireless router" _

    My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.

    I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.

    I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.

    I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n

    I need step by step instructions on this Yes please treat me like a fool!

    Thank you

    Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)

    After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!

  • I had to do a destructive recovery. Try to reinstall the bookmarks but the 8.0 new OS I installed does not ORGANIZE the FAVORITES so I can't import the. JSON file.

    I'm MISSING 'To ORGANIZE the BOOKMARKS' AND 'LIBRARY' IN 8.0, so I am obviously unable to follow the instructions given. I have Windows XP, not that it is important. I have the. JSON file stored in a hard disk external. Every website I've seen so far says to go to favorite bookmarks / organise and import from there, but there is NO organize bookmarks that I found in 8.0 so I have no idea how to do to import this file to install my old favorites.

    In addition, I don't have whatever it is labelled library either. AND I don't have any Add - ons that can be a problem.

    Organize bookmarks was renamed to display all bookmarks in the version of Firefox 4.0.

    Bookmarks > show all bookmarks or {Ctrl + Shift + B}

    BTW, you will need to restore this backup file JSON, import the bookmarks HTML files that have been exported from a web browser.

  • Since the reinstall drivers, my LG DVD writer does not read DVD

    Original title: LG ELECTRONICS LG GSA T40N Super Multi DVD IDE burner

    I had to re - install the drivers on this drive and then I noticed that there is more to read the DVD. This drive will now appear as a CD-ROM read only by car. When I tried to roll back the driver, the option was not available. Re-installing the drivers did not help and when I went to the LG site the disc has been abandoned and no support was available.

    How can I get this drive to read DVDs? What is the problem with the drivers that I have updated to what makes them to record the album as a CD-ROM drive?

    In the run box, type: regedit, and then click OK

    Navigate to:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E3

    25-11CE-BFC1-08002BE10318}

    With the right button of the upper filters button, if necessary, and then click 'remove '. Click on the Yes"" button.

    Click the lower filters key, if present and click 'delete '. Click on the Yes"" button.

    Close the registry editor and restart your computer.

  • In first items 14 scene selection from the Menu movie (Motion, holiday, Christmas frame) does not bind the scene 6 main Menu page. It places the scene 6 2 Menu scenes, but unrelated to the other, the main or scene selection Menu. What it

    How can I edit a movie Menu template? I use a Motion - celebrations and events - model of menu for Christmas related to 6 scene markers. Five scenes are represented by a thumbnail and name on 1 Menu scenes that appears when the button on the main menu page scene selection is reached. However, the scene 6, which has also a sticker and marker corresponding scene, is on another page (Menu 2 scenes) that does not link to the home page (does not appear in the scene selection Menu that has just 5 thumbnails and an arrow to return to the main Menu). In the area of work under the clip monitor Main Menu 1, Menu 1 and Menu 2 of scene scene appear together and by clicking on the thumbnail in the scene 2 menu the link to the clip 6 works except when Preview Disc is played, in which case the Menu 2 scene disappears. The scene marker is correctly linked, it just does not appear in the menus of the finish. The first five items of the Assembly (related to the scene selection menu) are all the video clips, but the 6th clip is a slide show. I read several threads on menus but found no mention that a slide show scene marker is treated differently by a menu template. Is it? The 5 first clips are all in the format AVI - DV with imported project files previously saved in this format, so that they could be related and engraved on a DVD. The slideshow is imported from PSE14 and 6 attached clips have already been burned successfully on disk (without menu) as a try-out. However, I was not satisfied with the resolution, then saved individually at the only other resolution DVD - SD576. Now I'm stuck at getting this sort menu. I operate 10 WIN. Any help will be accepted with gratitude.

    Hi, thanks for your response. I can rephrase the question very easily: why I've been so stupid? My problem was that I couldn't see a link in the menu between the Menu scenes 2 template and the main Menu. It turns out that the link was there all the time (a sideway arrow just above the main Menu link) but I thought he was part of the link from the main Menu and never clicked on it. When I burned my project to a disc and played on television, the sideway arrow was a different color and, of course, another link... the link I was looking for. Then, my apologies, problem solved, lesson learned - click on everything you see. Thank you. And I was very happy since the upgrade to 14 before except when it makes me feel stupid, which is frequently.

  • can you get back from the videos that are live foods and does not store on anywhere they would always hard disk drive somewhere not

    We were broadcasting live online do you know if that would be stored on my hard drive any where... or can they be high anyway... ?

    Sorry, but the live feeds are not saved and cannot not even be found using recovery software because they have not been saved as files.

    I wish I had better news, but they are simply not on the system (unless you have chosen to save them).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Wireless connection failed because windows did not receive response from the access point or wireless router

    Monday Nite I downloaded a driver site HTC syn my Android Hero phone. After extracting and installing the driver in the zip file, I tried to sync with my phone which was hook up my laptop. It did not work. Interrupt the synchronization process and I tried to check my email from outlook. Found it cannot send and receive mail. Open my browser and found that it disconnected. And so, using the LAN cable, fortunately, it worked. So I wonder what is happening to my function wireless on my laptop?

    Can someone tell me what I need to do? Thank you very much.

    Hello

    Search for updated drivers and reinstall if no later by using the procedure below.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • I just purchased Lightroom 6 and tried to install.  The program says "OS system req disappointed, does not support Windows Vista", but my operating system is Windows 7

    I was wondering if anyone else has this problem?  Any suggestions on what to try if your computer system tells you Windows 7 with Service Pack 1 , but the program disk Adobe Lightroom 6 says you have Windows Vista ?

    Copy disk files to a desktop directory.

    install from this directory.

    If you see this error again, right-click on the configuration file, and then click Properties > compatibility and the compatibility mode for win 7.

  • in 22 and 23.0 upgrate him disappears from the bookmarks toolbar and after crash firefox does not allow for recovery

    I hate this new update. I basically can't use the browser more. I only need firefox to do things properly, but if she cannot do these things I can't use it

    1. If firefox crashes (it does every 30 minutes it completely closed), then I need to be able to restore / recover all previously open windows when I start it back up again. There is no more.

    2. I use the bookmarks toolbar all the time, but often it appears completely blank. So now, the only way I can see bookmarks is if I go to options and uncheck bookmarks toolbar option and reselect then toolbar of bookmarks.

    It's so frustrating and worse still make you sure you can't do restorations! It of insulting and makes me want to not use your browser. A browser is a tool not criticizing a toy, but you guys will not stop playing with it.

    Also, older versions of the extension, meet bugs, you can refresh by using:

    Firefox orange (or the Tools menu) button > Add ons > "gear" button > "Check for Updates".

    For example, GM 1.5 (November 2012) vs GM 1.11 (July 2013).

  • From the control panel NVIDIA Win8.1 update does not work

    Since the system op Win 8.1 update, I am not able to get into the Nvidea Control Panel. I get a message that are not connected. I got the card Nvidea my main source for the monitor.

    Help appreciated.

    I guess you read the instructions step by step how to upgrade the system of 8 to 8.1 Win Win
    Did you? Did you follow this teaching?

    You update and install the driver nVidia essential to win the 8.1 that is available on the website of driver Toshiba?
    If this is not the case, this!

  • Tecra S1: After the installation of new Toshiba BT stack does not work correctly

    Hello
    I need help on my problem with the bluetooth configuration on my laptop tecra S1 with built-in bluetooth hardware.
    I have a Blackberry 8700 g with bluetooth function and Bluetooth Logitech headphones.
    At this moment, I have download the latest drivers from toshiba:
    Bluetooth stack
    Easy Bluetooth connection
    Bluetooth monitor

    The first time I installed the battery Bluetooth on my Windows XP / SP2 Machine.
    everything is ok...

    On the new start helping him material apears and installed Bluetooth RFBUS from Toshiba and a few more.
    After stopping and restarting, I have a magnitude of the 100% CPU usage.
    I start the monitor Bluetooth an i found new devices, but I can't connect to my Blackberry or my headphones...

    I think that the battery Bluetooth toshiba does ' t works well because there is the battery Bluetooth in XP/SP2 in the depths of the system.
    Can I use only Microsoft Bluetooth or only the Toshiba stack?

    Thanks for your replies
    Mike

    Hello

    In my opinion, you must use the MS Bluetooth stack or the Toshiba Bluetooth stack.
    If you want to know how to remove the battery Microsoft Bluetooth the OS with SP2, see Microsoft Knowledge base article:

    http://support.Microsoft.com/default.aspx?scid=kb;en-us;889814

    Good luck

  • trying to install from the disc image on the new macbook pro, I get a' configuration error: 6

    Hello, I created a disk image that includes an installed version of Adobe CS5, trying to install from the disc image on the new macbook pro, I get a' configuration error: 6 ". Is it possible to correct the error and install cs5?

    Thank you

    Dominique

    Adobe applications must be installed using files of facilities.  Uninstall, use the cleaning tool, and then reinstall.  If you need a download link is provided below.

    Adobe Creative Suite cleanup tool

    helps resolve installation for CS3 thru CS6 and creative cloud problems

    http://www.Adobe.com/support/contact/cscleanertool.html

    CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

    You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

    Quickly find your serial number

  • How can I get beyond Darwin appear on my screen. i book g3. has not been started over the years and when I try towers for always (like 1-1/4 (h) and then goes to a black sceen of darwin. I tried to boot from the disc, but I it won't let me see the hard dr

    My son tried to update the OS and now it will not be in service in any OS. Does not see the hard drive. But after the spin cycle for more than an hour, it goes into the black screen Darwin/BSD (my-name - Computer.loca) (console)

    Login: IOATAController buses blocking device.

    I tried to boot from the OS disk and may not see the hard drive to load to. I even used disk utility to erase all hoping to make just a re-install.

    Did he talk about Darwin?

    Also do not know if she had 10.2, 10.3 or 10.4 charged thereon.

    If the HARD drive is not visible in disk utility, then he is dead and must be replaced. When you start the computer to the disconnect is that the operating system cannot find a reader from which to load the OS. The last iBook G3 came with 10.4.11. The first iBook G3 came with 10.3.9. Many models of iBook G3, so I don't know what version of the OS is the minimum requirement for your.

  • I tried to run the IE8 downloaded from Microsoft and I got this message: "the version of IE you have installed does not match the update you are trying to install." error no. KB2618444

    I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:

    "The version of IE you have installed does not match the update you are trying to install." error no. KB2618444

    I'd appreciate any help that I couldn't solve this problem!

    Thank you!

    E-mail address is removed from the privacy *.

    Original title: error KB2618444setup

    I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.

    You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
    I'm going to guess you really want that for IE8.
    That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe

Maybe you are looking for

  • Satellite U400: Need to install Vista order and command buttons do not work

    I bought a model of Satellite U400-11 t with french windows Vista.I want to change the french Vista to Vista Hungarian. Of course, I bought a HUN legal vista and downloaded the drivers etc.I am interested in on the order of installation called statem

  • Use VirtualBench API without LabVIEW. Example: Python, dll, etc.

    Hello I would like to know if there is a way to use the API VirtualBench without LabVIEW? As the use of python or something. Thank you

  • water damage to x201t

    Hi people. To keep it simple, 2 L + water all over the keyboard, dry disassembled for 3-4 days in a bag with silica gel + immediate blow dry for 30 minutes just after contact with water. Fortunately the portable lights after waiting 2-4 minutes from

  • After reboot, everything is now so small that it is almost unreadable

    When I restarted my computer all the icons and printed is so small I can read; This inculdes the desktop, the internet, and all the documents. How can I get this back to how I got it? I closed and restarted several times since, and it is still so sma

  • Generic copy of XP and my product key

    I currently own a copy of XP Home upgrade. When I tried to reformat my hard drive that I kept getting an error message that says XP couldn't recognize my PCI Express slot. After searching the Web for ideas that the general consensous was to get a gen