iMac 27 end of 2012 windows 7 installation problems.

Similar Questions

• I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  T

  I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  Thank you

  Yes.

  (137273)

• Add Ram iMac 27 end of 2012

  Hi guys.
  I have an iMac 27 "end 2012, 3.2 GHz Intel Core, RAM 16 GB DDR3 1600 MHz, NVIDIA GeForce GTX 1024 MB, model number A1419, EMC 2546 675MX.

  Now, I would add 8 GB of RAM (4 + 4 + 8 + 8) but in the Apple dealer says that's not possible... 32 GB or anything.

  Also I request the addition of an extra drive SSD (now the classic 1 TB HDD), but said that's not possible... only Fusion od SSD 1 TB drive.

  I am confuse...

  You have now two modules of 8 GB in the top two slots. Two slots are empty and you want to add two 4 GB modules. You can do it. The dealer won't. However, cost of the RAM is pretty cheap, and you're looking to add to 24 GB or 32 GB. How much more two modules of 8 GB will be plus two new modules to 4 GB? Just be sure to have the correct specifications:

  Maximum memory	32 GB
  Memory locations	4-204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM

  Reliable suppliers are OWC, DataMemand Crucial.

• Satellite M30X windows 2000 installation problem

  I noticed ribooth has also posted a message with the same problem... but I haven't seen a real answer. The problem: if I try to install Windows 2000 Professional (including SP2) on my satellite M30X-130. The windows 2000 Setup program crashes with a "page in a no fault paged area" in acpi.sys just at the moment where the status in the status bar has been changed from windows 2000. If I press F7 during startup, acpi support is disabled and no page error occurs but the windows 2000 installation hangs on "the first screen" where you should be able to start, stop and? installation. There is no additional hardware installed and I'm unable to partition and format the HD with W2k. If I do it with win98 and create a FAT32 partition and try to install w2k on it I get the same ' page in a no fault paged area "acpi.sys error. Any suggestions to fix this?

  Hello
  Make sure that the system BIOS and other hardware is compatible with Windows 2000.
  This article may also help.

  HOW to: Specify a specific HAL or a third party during the installation of Windows
  http://support.Microsoft.com/?ID=216251

  Good bye

• Windows 7 installation problem Pavilion dv6-6c45eg

  Since I have a free license for windows 7 Professional at home, I decided to install it on my new Pavilion dv6-6c45eg that came with Windows 7 Home Premium.

  The problem is that the installation process stops at the beginning and said something like: "A required CD/DVD drive driver is missing... ", then he gives me the choice to load a driver. I googled a lot since yesterday and there seems to be something related to the SATA driver, however even load the SATA driver installation is not moving forward, after loading the driver it say that no new units have been detected.

  What I tried:

  * Install Windows 7 x 32 and x 64
  * Install from a USB flash drive

  * Install Windows 8 (same problem in Windows 7)

  * Check the SATA in the BIOS (not possible to see or modify on the BIOS F.19)

  * Search for the shortcomings of HD (even changed the HD)

  I'm sure it's something related to a driver, because I also installed Linux (OpenSuse, Fedora and Ubuntu) operating systems and they work fine.
  So, I would appreciate help to solve this problem.
  Thank you very much.

  Marcio

  Hi B Mista, thanks much for your reply, but I finally solved the problem, as described in this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/a-required-CDDVD-device-driver-is-missing-USB/61eda679-66cc-4512-B175-d02871394461

  Kind regards

  Marcio

• Language of Windows 8 installation problem

  I've seen this before, but the answers never seem to work, let alone apply even to my

  version of windows. I had to take my computer be restored, and they choose to

  install the pack of English as the main language of the computer. I thought that this would not

  a question and as soon as I came back, I tried to install the language pack, but each time

  I am trying to download and install, part of it never ends.

  "The following updates were not installed:

  Language Japanese module - Windows 8 for x 64 systems - (KB2607607) [ja-JP_LP].

  There always seems to be something that prevents installation to complete entirely. I tried

  Anyway, install it via the computer restarts (which would say then do not unplug the computer,

  and would that part 5 of 84 is downloading, or something of the sort.) Each time, he would get to the

  end of the installation, it looks so there 'no' install, and saying that it restarts.

  I see there are son tell her because I let Windows updates be active, but I've never had

  This problem in the past before? Is there a way to manually download the update? I don't really want to 'restore' this computer again.

  Hello

  You might face this question when the components responsible for Windows updates to install is damaged. Please write us with the following details.

  Are you facing this problem with any other update?

  I suggest to follow the steps below and check if you help.

  Method 1: Run Windows Update convenience store.

  Open the link given below to run the troubleshooter, but it is valid for the edition Home Premium and Enterprise edition.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Check the question and move on to the next method.

  Method 2: Download and install the update to the clean boot.

  Download the language pack the link given below and try to install the clean boot.

  Language packs

  http://Windows.Microsoft.com/en-us/Windows/language-packs#lptabs=WIN8

  Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. 

    

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Please refer to the section: how to reset the computer to start normally after a boot minimum troubleshooting section of Kb to start the computer in normal startup after having solved the problem.

  Let us know the status of the issue. We will help you.

• Satellite Pro 6000: Windows XP installation problem

  Win98SE works well on my Satellite Pro 6000. I put XP on it.
  During commissioning, I see the logo "windows XP pro. But after loading XP, I have no picture.

  Save mode then also does not work, I can't see anything.
  What I've done wrong? It seems that the video driver is missing?
  With the recovery cd is everything works again. (win98se)

  Someone at - it solution to put XP on this laptop?
  Gr. R.

  Hello

  In my opinion, there should be no problem with the use of Windows XP on this unit.
  As far as I know the laptop came with WinXp pro, W2k and Win98SE.
  In this case, all required drivers are available and must be installed in the correct order.
  I assume that the installation and the installation procedure has been authorized. Did you install it on a second partition? You format the HDD to NTFS?

• Operating repair of windows CD installation problem - win 2 k 3 Dell poweredge servers

  I saved a Windows 2003 standard server (C drive and the system state) using windows backup and restored to a freshly installed Windows 2003 standard Server - effectively cloning the server installed.  (that is to say, boot from the installation CD, select install windows, press F8, select detected installed OS and press 'R' to repair)

  When I do this, after he copied the files on the hard drive and it recharges, it hangs shortly after starting windows screen.  It seems that whenever that happens, I have to run Windows 2003 a second time (I choose ultimately "press ENTER to retry the upgrade,") before he's going to fix the system successfully enough that I can then apply SP2 and all subsequent WinUpdates.

  What is different about the second compared to the first repair attempt?

  Is it possible to tell the system to start with so I know I need to do?

  Hey Joe,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please ask your question in the TechNet Windows Server général forum.

• Windows Update installation problem

  When I turned off my laptop Windows Vista Home Premium, the system entered into mode "install updates". It has been the installation of update 3 of 8 for more than an hour. The display does not turn off and unplug the machine. The disk led is on continuously.

  Do I have a problem? Should what steps I take? Thank you.

  Hi jayalan,

  Welcome to the Microsoft Answers site!

  The updates take time depending on the size of the file. If the update has hung so I suggest you hard reboot the computer and see if you can boot to the desktop. If you can boot to the desktop and then the updates are not installed will appear and which will be installed during the next update.

  Once done with the step above after starting the computer on the desk. I suggest that reset you Windows Update components and perhaps that should take care of the updates. install the updates by selecting two both than some updates system needs to reboot for the changes to take effect.

  Access the link below to reset the Windows Update components automatically.

  http://support.Microsoft.com/kb/971058

  If the computer does not start on the desktop, then I suggest you to start safe mode and see if you can boot to the desktop. Once you are in the office, do a system restore which will take the computer to a time where it was working fine.

  Go to the link below for the procedure to start in Safe Mode and system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Let us know for if you are unable to boot to the desktop or to get help.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows xp installation problems

  Unfortunately I have no error message as such, first of all the toolbar menu bar and start disappeared in an irreversible way, at the same time that no executable programs would work, no sound would not play and only internet browser as well as wading through my folders and files was the only operational things. After an attempt to remedy this situation, I was told (online) to reinstall windows xp, this seemed an idea without danger at the same time, as I did before attaching unrelated problems, however, when reinstalling (or should I say before installation was complete) in one of the many process, the pc would restart and get to the device registration screen , from there, it's been jammed indefinitely, and flashing icons of many colors and forms have appeared and in some cases, replace a word or a number. (placement and Visual icon seem to be completely random)

  I also read (before attempts to reinstall) it could be a malware problems, well that sounded rather difficult for me, as the malware program would not start let alone clean all the above questions. I have redownloaded malwarebytes and again, unsuccessfully, to get any .exe program to initialize even. An error appeared in keeping it (unfortunately silly me, I had not planned this far ahead and has not copied the error name/numbers)

  I have tried many various difficulties through the system recovery and repair, but without success, I know it's not good to go, but any help at all would be greatly appreciated.

  * note * my usb ports are both issues and was not able to get the most recent of my files on an external hard drive etc, I would really like to come out of this with my hard drive in tact.

  Alternatively, you can attach your hard drive as 2nd drive or slave for other PC work and then just copy the data off the coast.

  Because of the strange characters and colors I would always start the recovery console

  Unfortunately it did not work and the same colors and icons appeared at startup boot via the controls proved to be without success either.

  I have yet to try this another recovery disc, I'll try that now, other then that, it seems that it would be a fixed format.

  Respectfully, that you try many different things absolutely without success. I encourage you strongly to create this live cd, following the instructions on the link in my previous post, recover your files, reformat, re-install and do with it.

  Any method allows you to retrieve your files get and do. You have re-installed windows 10 times since your first post and have been without headaches. It's just my recommendation of course.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Update Windows vista installation problem

  ' installation failure windows didn't install the update for Microsoft silverlight (kb960353) error WindowsUpdate_0000064C ""WindowsUpdate_dt000. I tried to download the update several times of the month passed without success. I have closed all active programs, and then tried, that didn't work. It's the only update that will not be installed during the month.

  Visit http://silverlight.net/GetStarted/ and click on install Silverlight (Windows Runtime). Carey Frisch

• Windows 7 installation problem: device driver cd/dvd not found___

  I am running Windows XP 32-bit and just bought the Windows 7 Home Premium 64-bit. I ran the update Advisor and I can run the 64-bit version - I'm running a 3gig dual-core rig.
  When I start the computer from the windows disk it says above (job title) after waiting ages in the installation program. It is not also take me to a page to do a clean install, as in windows XP when you went blue screen startup. All I want to do is to format my C drive and install Windows 7 above, but happens as if I want to that I don't have.

  I don't want to format my hard drive to find that Windows 7 does not correctly or the other? Any suggestions? Why what is happening and why can't I just do a clean install - i.e. Delete partition, format partition etc and install Windows 7?

  There are 2 main threads for this issue, which seems to be related to the retail drives (and others):

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/48cdc51e-AFFC-40EC-a0ba-62d37948843c#c96e2c40-5d0a-45df-BF47-a6eff30c5d2b

  And the other is a general discussion thread:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/c211ce29-8e5c-4A2F-AEEE-fc2a6e62aef5

  I posted a few solutions in the first thread, so I would check everything first.

  Also, can you let me know if your machine is a gateway?

  I hope this helps. If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Update of new Windows 7 installation problems

  Hello

  After windows 10 road test for a few months, I decided that it wasn't going to work for me. So I used my drive of windows 7 to do a new installation, after I formatted the hard drive. I installed the operating system successfully, but when I do the 200 some setting to update and to install as failure 8 and it asks me to restart, I do. After he completes the updates I login and then the screen is black except for the cursor that I can move around. I did that only connected things are a monitor, keyboard and mouse and Ethernet and always have the same question.

  I restarted in safe mode, and I am able to do throughout, on the desktop, no problem. So that being the case I thought I could do a system restore and updates from another chance. Well, I did this 3 times now with no luck. I even downloaded the diagnosis of WindowsUpdate tool and when I run it I get the error code "0 x 80070002.

  I honestly have no idea what to do and have not found help online.

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Windows 7 installation problem

  I'm trying to install Windows 7 from an expansion of Seagate 2 to and have used http://bootableusb.net/make-bootable-external-hdd-install-windows-78/ to format it to install Windows 7.

  However my my problem is that whenever I try to start the installer, it will not from 0 percent and cancelled with an error: "Windows Setup could not reset the deployment engine. To install windows, restart the installation.

  External not worth it, unless you want to run the installer to replace C.  But you will always have a cleaner installation by removing all partitions during installation that requires the stick bootable or disc.

  Follow own reinstall Windows 7

• HP Deskjet 1050 J410 Printer series with windows 7 - installation problem?

  Good evening
  I just bought a new printer HP Deskjet 1050 J410 series with windows 7. I installed it... with many problems... whenever it is said that the driver could not be found... but in the end, it is installed. The scanner works fine. While the printer is blocked... When I clicked on the resolution of problems, the message I got was:
  HP Deskjet 1050 J410 series doesn't have a driver.
   
  I uninstalled and reinstalled 3 times and the same problem persists. I don't understand what that means. Should I please?
  Thank you very much for the help!

  Make sure you have the latest and correct the driver for your operating system.

  HP Deskjet 1050 All - in - One Printer series - J410

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodSeriesId=4027462&prodTypeId=18972

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135