iMac auto stop and restart does not.

Similar Questions

• Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  To refer to EX11 some:

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• pages started freezing, force to quit and restart does not work

  Try to do the homework, no good with computers. I used screen split pages with safari, then I'll click to pages and the cursor does not blink, and I can ty click on something, but nothing helped. I even try to click in Safari and who does not work either. I have to then press the task or what you call it, force quit applications, then restart. It started just randomly and really annoying, see I need to deal with all my classes AP. Pages for this when alone as well.

  Hello ElliottRadovan,

  I understand that the Pages and Safari sometimes appear to hang when switching between the two. Fortunately we have some articles that detail how to identify and correct the source of the problem, restore stability to your Mac.

  Isolate problems on Mac OS X
  https://support.Apple.com/en-us/HT203161

  Mac OS X: how to solve a software problem
  https://support.Apple.com/en-us/HT201516

  See you soon!

• How can I get the computer to stop unless turned off when stopping and restarting will not work?

  I now have to turn off the power switch of the computer to shut it down, and it does not restart at the request.

  Turn of the automatic restart in case of error and then report the error message you get on the blue screen.

  http://support.Microsoft.com/kb/320299

  And download BlueScreenView http://www.nirsoft.net/utils/blue_screen_view.html
  Unzip the file and run it.

  See SpiritX responses in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/how-to-analyze-a-crash-dump-to-determine-root/ef9b9570-c852-e011-8dfc-68b599b31bf5?msgId=eba60431-c952-e011-8dfc-68b599b31bf5

  You can also copy/paste the content of the most recent minidump in an answer here.

• XPS 9000 froze and restart does not start - get the cursor flashing, top left of the screen

  System was working normally and after some time froze - no mouse movement, clock does not move, etc.

  Did a stop down with the power button (hold down 10 sec +) to stop.

  On switching on, does not pass through the boot sequence.  F2 does nothing and the only sigh of 'life' is a blinking cursor, upper left corner of the screen.  Tried to close - turn several times with the same result.

  I suspect a motherboard problem because there is no start. Don't know any other tricks to try to resuscitate the box.

  Does anyone have experience/solution for this type of problem?

  WGR,

  As there is no "beeps", I guess as a failed motherboard.

  Try the following, if you are comfortable working around computers:

  Note: The only 100% POWER supply test method, is to install a known working power.
  
  Unplug the power cord, hold the power button in for about 15-20 seconds, open the case, disconnect the power connector 24-pin motherboard and jumping the Green wire to one of the black wires, plug in the power cord and the power of the system, if food and case fans and disk hard drive performance then the power supply should be good.

  Note: Do not remove the wires from the plug, use a small piece of wire or a paper clip as a rider.

  Excerpt from power supply, again, unplug the power cord, hold the power button again for 15/20 seconds to discharge residual power, reconnect the connector 24 pin to the motherboard.
  Remove all the computer PCI cards, remove the video card [as appropriate], disconnect all devices, except the monitor, mouse and keyboard and unplug cable power & data of all readers.
     
  Reconnect the power cord and power the system on, see if you get something different from the LED on the power button, or any 'beeps '.

  No difference, remove the system memory and try again.

  Still shows no signs of life while looking at a motherboard replacement & maybe a processor.

  Note: The good news is, processors lack rarely, being the only method I know to check a processor, install a compatible work PC, or use a known job processing.

  Unfortunately the Dell OEM XPS 9000 renovated/new motherboards are not cheap.
       
  Bev.

• My computer starts and I get the Windows startup screen, then my screen goes black and the computer is frozen I guess. Stopping and restarting do not work.

  I get to the black screen with the Windows XP logo and the bar of the State, and instead of my forthcoming accounts page, the screen goes black and nothing else happens. I tried the power off to reset and restart, and I can't perform a recovery of the system with the CD.

  Hi cgrosenick,

  -What software changes you did on the computer before the show?

  Follow these steps:

  Method 1:

  Start your computer in last known good configuration mode.

  For instructions, see How to start your computer by using the last good Configuration in Windows XP functionality

   

  Method 2:

   

  Follow the steps in this article:

  Computer stops responding with a black screen when you start Windows XP

• My his laptop makes a beep when I press the power button / stop and it does not start

  Hello

  I bought a new Dell Inspiron 15z touch ultrabook and when I pressed the power button, it starts to beep and won't start. The screen is totally blank. What should do? Help, please

  -Mayur gala

  Hi Mayur,

  Welcome to the community,

  Sound signal can be used as a diagnostic indicator. The computer may emit a series of beeps at startup if errors or problems. This series of beeps identifies a problem and is called "beep code".

  See the table below which shows the beep codes and the possible problem:

  Overview of beep Code
  Beeps	Description	Possible cause
  1	ROM BIOS checksum failure	The map system, covers BIOS corruption or errors ROM failure
  2	No memory (RAM) detected	Memory or memory slot failure
  3	Chipset error (North and South Bridge error) Time-Of-Day Clock test failure Gate A20 failure Super i/o chip failure Keyboard controller failure	System board failure
  4	Memory read / write failure	Memory failure
  5	Real Time Clock (RTC) power failure	CMOS battery failure
  6	Video BIOS	Video/smart card failure
  7	Failure of the CPU	Processor failure
  8	LCD SCREEN	Failure of the LCD

  Let me know if you need assistance.

  Thank you

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• my video and streaming does not work correctly, always stop.

  my video and streaming does not work properly, his game and stops all the time.

  Hello

  1. this happens when you play movies or videos saved on the computer?

  I suggest you to follow these steps and check if that helps.

  Method 1:

  If this happens when you stream or watching videos online, then I suggest you day flash player latest version and check if it helps:

  http://get.Adobe.com/flashplayer/

  Method 2:

  If the problem occurs even when you try to play the recorded video on the computer, then try to update the latest drivers for the video card and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see this link:

  http://support.Microsoft.com/kb/2532294

  It will be useful.

• Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04:17:0407/17/11

• Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  If lr crashes repeatedly, reset preferences.   http://www.lightroomforums.NET/showthread.php?14226-resetting-%28or-trashing-%29-the-light file-Preferences-room

• Explorer stops and restarts.

  Windows Explorer stops and restarts when I right-click on a file or a folder, or when I try to delete a file or folder. A window will appear: "Windows Explorer has stopped working. Windows is checking for a solution to the problem... ». Then another window will appear: "Windows Explorer restarts. This does not happen with all files and folders, but many. I can use a third-party program (sheets) to delete files and folders, but not to explore. I have recently installed Windows Live Mail, Photo Gallery and I replaced Norton Security with McAfee, but I don't know if the problem started after or before those. Says Windows solutions I check for updates but I have automatic updates turned on and I have all the updates.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  Did you use the McAfee removal tool to ensure that it has been uninstalled completely? If this isn't the case, it uses now.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Norton is also known to cause strange problems with explore and Internet Explorer.

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• What is the difference between the stop and restart?

  What is the difference between the stop and restart?  I feel that stopping closed all processes, completely erases RAM memory and clears the cache of the processor.  I need to know if 1) this is a correct assumption and 2) which is better for daily maintenance of the system.  Thank you in advance.

  Hello Jeremy_1976,

  Your support when the judgment is correct. Basically, it stops the process and completely turns off your computer. Reboot, however, temporarily your PC stops, then turn it on again. This happens usually when Windows updates are installed. After installation, the system is restarted (rebooted) so that any update has been successfully installed and works as it should. You can be a little mixed upward the reboot and the hibernation. Reboot is, as I have indicated previously, basically a reboot of your machine. Ultimately, your PC is on again after a reboot. However, hibernation, stores all data currently in memory in a special file, then the PC turns off. When you then turn on your PC, that is, coming out of hibernation, hibernation files is used to restore the status of the PC than when you initially put into hibernation. In other words all the programs you had open before will automatically open and be ready to use hibernation.

  Hibernation or sleep for that matter is for short-term use. It is normal in Hibernate, or sleep if you want to be away from your PC for half an hour or so. If you leave more than I suggest you stop completely.

  A point to remember about hibernation is that, if you use put into hibernation, you can't, once you get out after hibernation, install programs or updates. You have to stop and restart normally to do.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Explorer.exe stops and restarts constantly - I have a solution but its only temporary.

  Had no problems with Windows 7 for a year. Then recently explorer.exe stops and restarts repeatedly, over and over again each 5-10secs. Our Event Viewer error is a .dll module in User\User blame name\Apps\Local\, called eciwavatebiwe.dll. I find this .dll and when I rename the judgment falls down, but instead I raise an alert at startup that windows does not find this file (I click just the red x).

  I used virus and sfc/scannow ladies, but no error reported.

  The file in question announced swapper Windows NT caps lock ctrl but Googling is not this .dll anywhere.

  Any ideas what going on?

  Chris

  eciwavatebiwe.dll is a virus what I see. Remove it and start regedit.exe and findeciwavatebiwe.dll and delete everything you find.

  Also scan your system with your scanner, AntiVirus and Malwarebytes' Anti-Malware (http://www.malwarebytes.org/mbam.php).

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/