IMac (BOOTCAMP) ruined
Can someone help me please, I started bootcamp, I wanted to install windows 7. When started the process of partitioning, it was stuck near the end for a long time. I close d bootcamp and everything seemed normal. When I opened the disk utility, I saw that it said my drive of fusion was 1000Go. On the Macintosh partition, he said I had only 18gbs free, but I had only used 647 GB on the 1000 GB available. Please help me. How can I solve this problem?
Boot Camp: Remove Windows from your Mac
more
remove the windows bootcamp partition
Tags: Windows Software
Similar Questions
-
iMac Bootcamp slow disk? Upgrade SSD?
Hello
I have an iMac that I bought in January 2014.
The configuration is:
NVIDIA GeForce GT 750M 1 GB GDDR5
3.1 GHz Quad - core Intel Core i7, Turbo Boost up to 3.9 GHz
8 GB 1600 MHz DDR3 SDRAM - 2 x 4 GB
1 TB 5400 RPM Serial ATA hard drive
Now, I run Bootcamp on window 8, and I mainly use it for music production. I am facing problems in my music software and it tends to be slow.
In Task Manager, the disk performance is almost always 100%, even when I do certain related work of non-musique.
My question is: is my hard drive, the main problem here, in order to have optimal performance?
If Yes, would be updated to Samsung 500 GB 850 Evo 2.5 "SATA Solid State Drive III solve all my pain and suffering?
I really hope you can help me guys!
You cannot install an SSD in an iMac in 2014, however, you can use an external SSD to boot from. However, you have another problem... Windows does not work from an external device. In short, he must live with what you have or sell the computer and buy an iMac with a pre-installed SSD.
-
10 on an iMac bootcamped windows reinstallation?
Hello all the world, I was wondering if I would be able to "Refresh" my 10 Windows using the built-in Restorer (return to factory settings), or is it necessary that reinstalling Windows 10 from my Mac OS, wiping the partition, bootcamp and reinstalling windows 10 like that?
I have install windows7 in training camp and upgrade of windows install from in windows then windows8.1 and then window10 windows8 so I guess you could
-
problem about the bootcamp assistant
guys good day. I'm new to the community and I want to ask about my iMac bootcamp Assistant mid-2009. I want to install windows 7 on my mac but there is a problem in my training camp. The list in the menu option have only 2 checkbox. can you help me how to solve my problem.
I improve my software in the last update but the bootcamp, still no change. The 2nd box say install or remove windows cannot check.
brysky08
You should give this Apple Support article a read-through, install Windows using Boot Camp - Apple Support
-
Im running on an Imac bootcamped with win7, downloaded the driver on the site of hp directly support, and this is the first ive problem in a year and a half. Setting im here looking at my device driver details, all this so far and active, and still refuses the installation. I tried, futile full, contact any staff on the issue, and this is my last straw, so to speak. I am a student and I can go without a printer works at home any longer. The error reads as follows:
-------------------------------------------------------------------------------------------------------------------------------
HP - Photosmart series C4700
Results of system requirements
This computer has been verified to the system requirements to install this product.
[X] this system does not meet one or more of the minimum requirements for the installation of this product. The installation cannot continue.
Requirement
USB DRIVERS
Details and advice:
This computer does not have the necessary support from the USB software to allow for the completion of an installation of USB. The installation cannot continue until this is resolved.
Action required: click Cancel to exit this software installation. In order to install the devices such as a USB device, please refer to your computer documentation or the documentation of expansion card USB for more information on usb drivers.USB DEVICE
Details and advice:
This computer does not have the necessary support of USB hardware enabled to allow for the completion of an installation of USB. The installation cannot continue until this is resolved.
Action required: click Cancel to exit this software installation. In order to install the devices such as a USB device, please refer to your computer documentation or the documentation of expansion card USB for more information on usb drivers.-------------------------------------------------------------------------------------------------------------------------------
The help button next to "Retry" in the lower left is grayed out, and the options 'Back' & 'Continue', leaving only "try again" or "Cancel". There is no error code, no other signifiers that might lead me in the right direction.Please, any help or speculation is welcome, I'll try salt and wise at this point. And thanks in advance.
Hello
Click the Start button and type folder in the search bar, then open the Temp folder indicated.Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
Open the installation folder.
Find the file usbready.exe and rename it to usbready.old.exe
Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.Now follow the installation and check for the difference.
Kind regards
Shlomi -
Impossible to install 10 Windows via BootCamp on iMac 5K with Fusion Drive
Hello
I tried to install Windows 10 Professional via Boot Camp on my iMac 5K end of 2015 (version OS X 10.11) with a disc of the Fusion 2 to for about a week now. Right now I'm on my 4th or 5th try on Windows 10 installation on the iMac because each installation fails gives me an error that the drive is not formatted correctly or he couldn't find the score even though I have the selected in the list of available drives. I even went up to both to run the commands of the PART of the DISK from the command prompt in the area of troubleshooting Installer Windows 10 to format drive to NTFS instead of FAT32.
Here are some of the mistakes that I received:
1 Windows cannot be installed to this hard disk space. This space of hard disk is formatted with a version not support the NTFS file system.
2. we could not create a new partition or locate an existing one. For more information, see the Setup logs files.
I used the Boot Camp configuration application (version 6.0.1) to create a USB key after you download the image ISO from Microsoft. The USB flash drive that creates the installer will start the iMac, but I can't get past the screen "where do you want to install Windows? I tried the merge disk partitioning ways without success, beforehand, because I thought that it could cause a problem. He was left as a full drive 2 TB, or divide the flash part away and seen the almost 2 to rotation and the merger of 128 GB (flash) portion and lucky either.
I'm full of ideas on what to try... I have loaded Windows 7 Professional via Boot Camp several times and have never encountered a problem with Boot Camp with 10 Windows so far.
Workaround I found that worked for me was to install
Win7 Pro 64 bit. Then created just the Bootcamp driver USB key
(no operating system installer). Next I went to do the upgrade of Win10 of
in the environment of Win7. FWIW, I also chose to not save
anything (new installation).
You will need to keep the installation to make sure that you press the Option
key with multiple reboots (why Windows still insists on this)
and select the Windows volume to boot from. Once all the nonsense restarts
were carried out and finally Windows was running, I plugged it in training camp
driver USB key, install hardware drivers and everything was good to go.
Now, it was on an old MacBook Pro, which does not officially have the Bootcamp
support for WIn10 if the material is quite capable.
-
Cannot install windows via bootcamp (Imac Mid 2011)
Hi, I struggled for the last 2 days and can't seem to find how to create a windows partition and installed it.
Note: I have a 27 inch mid 2011 Imac and run MacOS Sierra 10.12.
I have problems with bootcamp especially at the stage of the process USB drive.
1. I do not understand why Bootcamp assistant 2 display only tasks being #1 download the windows software and #2 install windows 10 when all apple support pages show 3 different tasks available as here https://support.apple.com/en-us/HT205016http ://
2. I prefer to install windows 7 on my partition, bootcamp, however 'install windows 10', which means that I can't install an older version on my partition? I tried to install windows 7 via a win7 .iso file AND a win10 .iso but none of them works.
3. whenever I try to install windows, the system do not recognize my USB (it would be with .iso win10 associated drivers or Win7 .iso. + drivers associated) and constantly asking for a disc to be inserted.
My USB has been formatted through disk as MS-DOS (FAT32) volume and all utility used .iso comes from Microsoft. I don't understand why I can't have my. ISO recognized by the system.
Help please :)
Damien Kitsune wrote:
1. I do not understand why Bootcamp assistant appear only the 2 tasks being #1 and #2 install windows 10 download windows software when apple support pages show 3 different tasks available as here https://support.apple.com/en-us/HT205016
This is normal and expected behavior. Your 2011 Mac does not support the USB Windows installation. You must use a physical DVD burned ISO. Your Mac does not officially support Windows 10. The ISO files are available at https://www.microsoft.com/en-us/software-download/home .
Documentation on Apple's site shows not all models. Please visit https://help.apple.com/bootcamp/mac/5.0/help/ for an older version (FC5).
-
Hello
I under of am 35 years Pc (in the order pc Windows, then more pc Linux).
Currently I am increasingly tempted to take an Imac, but I'm almost certain to install boot camp car I'm gamer and, if I understand it is necessary.
My question is: If install my windows under boot camp 10 I would have a "suffer" all days drivers and system which are precisely one of the reasons makes me leave Windows?
Thank you for your return
Mister Hur
no idea what you are saying but Bootcamp questions you will probably meet with a better group to answer in the forum of bootcamp Boot Camp
-
Bootcamp errors during the installation of the USB on iMac mid-2011
I tried to install Windows 8.1 on my iMac for mid-2011. The problem is that my optical drive is not working properly.
I created a USB bootable via Bootcamp Assistant on my MBPr and have tried my iMac HARD drive partitioning, using OSX disk utility and disk in recovery mode utility. I tried to leave the space as free and formatted as ExFat and fat.
At the start of the usb drive and try to install on the bootcamp partition, I get the error that it is a MBR and not on a GPT partition.
In addition, do not know if it's important, but it is a secondary internal drive. My main drive of OSX is an SSD. I have no problem accessing the drive in question under OSX.
Help please!
Mac 2011 (and more) have challenges with no DVD installs due to optical drive problems. Changes to the file info.plist Bootcamp to allow creating install USB works only partially because of start-up problems. Only two solutions that work with a high degree of success are
1. replace the optical drive, or,
Following two discussions have some installs successfully, but they usually lead to broken drivers or not functional Apple hardware.
-
Bootcamp partitions not bootable with iMac 2015
Hi guys,.
I tried to install boot camp on my iMac (late 2015, Fusion drive) without success.
- Download a picture ISO of Windows 10.
- Point the wizard Boot camp on the image.
- Create a partition for Windows.
- Click install and wait until the end.
- Restarting the computer but boots directly in OsX.
- I can see that a new partition has been created with the fat. But it is not present when you start 'startup disk '.
All the tutorials and guides on the net seems to focus on the use of USB sticks to accommodate the installation of Windows, but I can understand, with the new iMacs installation of Windows is supposed to be hosted on an additional partition. I do not see such a partition.
Anyone have better luck than me?
Use the official guide Apple - https://help.apple.com/bootcamp/assistant/6.0/ .
You must make sure there is no storage devices external or connected hubs.
-
Color iMac 17.1 for Windows bootcamp 10 profile
Hi all
10 Windows running on the iMac 17.1 with the display of P3 (end 2015 27 ") seem dark and saturated. I was trying to change the color of the monitor profiles as you normally would on a standard Windows computer, but when I do the same thing on the iMac in Bootcamp Windows completely ignores the color profile. Is this a known issue with the Bootcamp drivers or monitor? Is the a way to get accurate color on Bootcamp using P3 view? Thanks in advance.
Look under the management of the colors for the adapter.
See also https://pcmonitors.info/articles/using-icc-profiles-in-windows/ .
-
How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?
This has two questions:
1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.
2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.
3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.
Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.
The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.
Then there is the BootCamp partition on the HARD drive partition #2.
Is there a way to get what I need?
That is what has been described in this notice of two canoes?
Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3
Thank you.
After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.
Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.
A. take backup
1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.
B. fuse out of the merger in two physical disks drive: SSD + HDD
1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)
Cs diskutil list
2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive. Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,
diskutil cs deleteVolume Logical Volume ID
CS diskutil remove logical Volume Group ID
This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.
I hit this issue too. To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:
Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)
and repeat for disk1/dev/disk1 which is the HARD drive in my case).
This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.
2 create independent partitions (non-fusionend) for the installation of OSX.
Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".
3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".
C. install on the HARD disk as drive didier autonomous not fusion.
1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.
D. use BootCamp Yosemite f5 to install windows.
1. launch Yosemite bootcamp.
2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software. Do not click on the last box to install or remove windows pie creating real bootcamp partition again.
3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.
4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use. Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model). Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.
-From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.
-Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.
-Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.
5. open Boot Camp Assistant again and only select the third option, install Windows 7.
It will show you the screen to select what installation disk, select HARD drive.
Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.
For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.
Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio
6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.
7. once the installation is complete, check that windows is functioning correctly.
E. Si you want to upgrade to windows 10 Windows 7.
1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page. Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE. Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.
2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.
F. reinstall OSX El Capitan
Once your target windows system (if windows 7, windows 8 or windows 10) works very well. You can continue to create again your Fusion drive and reinstall OSX El Capitan.
1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.
2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.
3. on the selection screen, select start Yosemite OSX install drive.
4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.
5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.
6 type the 'diskutil list' command to list all disks and partitions.
The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.
The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.
G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc
1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.
2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.
3. on the selection screen, select start Yosemite OSX install drive.
4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.
5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.
Cs diskutil list
6. in the terminal, type commands to delete logical drives from basic storage. Note: All data will be destroyed in the logical drive.
diskutil cs deleteVolume Logical Volume ID
CS diskutil remove logical Volume Group ID
7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 121,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_HFS GB SSD 121.0 disk0s2
/ dev/disk1 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 3.0 to disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS 1.7 Untitled TB disk1s2
3: disk1s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft database BOOTCAMP 503.0 GB disk1s4
5: Apple_HFS 801,4 Untitled GB disk1s5
8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.
diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5
Note: Mark the group id of logical volume shown in the results.
In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.
So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2
9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.
diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%
10 command "diskutil cs type list" to check the resulting fusion drive created.
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E
=========================================================
Name: LVG
Status: online
Dimensions: 1815635525632 B (1.8 to)
Free space: 90112 B (90.1 KB)
|
+-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 120988852224 B (121.0 GB)
|
+-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E
| ----------------------------------------------------
| Index: 1
| Disc: disk1s2
| Status: online
| Dimensions: 1694646673408 B (1.7 to)
|
+--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9
----------------------------------------------------------
Encryption type: no
|
+--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10
---------------------------------------------------
Disc: disk2
Status: online
Size (Total): 1809780178944 B (1.8 to)
Reversible: no
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
LVG Type: Fusion, sparse
11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.
12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.
13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.
14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.
15. yet once please take personal responsibility on damage if you follow the instructions in this article.
-
Windows with Bootcamp on iMac with only SSD HD?
I would like to run Windows with Bootcamp on my iMac. Retina iMac late 2014 with no internal hard drive, only the SSD and the 10.11.4. After countless tests, I dropped; I ask the community, is - it possible at all?
Yes, but your post is so incomplete, you did not provide details of what errors you got. Chances are you have too small a SSD and simply do not have enough space.
Finally, I ask the moderator to move this thread on the forum of Boot Camp. This is an iMac general forum where most users use only OS X.
-
Problem Windows/Bootcamp Partition with unsupported Mac (iMac 21.5 "mid-2011)
I tried many door routes stealth to install Windows 10 on my iMac (21.5 inch, mid-2011; 1 TB SATA disk), which seems to be not taken in charge by Apple. Whenever I try to use Bootcamp to try to establish a partition, in the end it cuts and force restarts my computer.
I decided to make my own (150 GB, FAT MS-DOS) partition and a bootable USB stick with all the files .iso on it. The bootable USB key works very well and can get into Boot EFI without problem. The score, according to the EFI boot and Windows Installer, "has a table of MBR partition...". [and] Windows can only be installed on GPT disks. »
I tried to format the partition to NTFS by using the command-line Windows, such as proposed in the link below, but after downloading the Tuxera NTFS file to move the .iso to the Windows partition image file (I guess to make its own bootable drive) the drive itself is not started.
In fact, the Windows partition came not in the start screen (hosting option after reboot OR allowing the computer initiate by itself).
https://www.reddit.com/r/Mac/comments/3rzxd5/guide_windows_10_bootcamp_on_unsupp orted_macs.
After trying to format this partition using the Windows command line, Windows begins to remove it and provides the same error message. After some research, I found that the partitions are hybrid and need for special maintenance. I tried to use gpart, but when trying to convert ONLY TPG, took place the message in a terminal:
Caveat! Main partition table overlaps the first partition of 32 blocks!
You need to remove this partition or resize in another utility.
Caveat! Secondary partition table overlaps the last partition of
33 blocks!
You need to remove this partition or resize in another utility.
I activated the command 'csrutil disable' in Recovery Mode in order to bypass the Protection of the integrity of the system, I found that some users of El Capitan were problems with this.
I was not able to proceed to the question since this last error and I'm not sure how to proceed, especially because I don't want to lose my data on my Mac hard drive. If anyone knows any information on how I should proceed, please let me know!
1. you use Boot EFI on a preUEFI computer.
2. to help TO do a FAT32 partition will also create a hybrid MBR. Please after the release of
sudo fdisk/dev/disk0
3. you need not of Tuxera, because Windows install has already the ability to convert FAT to NTFS.
4. your built-in optical drive works? If so, your W10 ISO burn to a physical DVD and try to follow the standard installation of the BCA.
-
Hi all
Hoping someone has encountered this before. We have a 15 Apple 21.5 "iMac with a 1 TB fusion drive that must have bootcamp for a classroom environment. I am trying to build at least one of them. Here's the context:
1 El Capitan for Mac environment
2. Windows 10 (education)
3 21.5 "Retuna iMac with 1 TB disk fusion (16 GB of RAM)
Question: Windows 10 starts in "diagnostic auto repair", after that the bootcamp drivers are loaded. The iMac restarts in Windows 10, but forced to do a "restore" which throws pilots bootcamp (version 6)
I try to reinstall 6 new bootcamp drivers (I managed to copy it to a Flash DRIVE via the OSXReserve Partition) but the same problem occurs.
Any suggestions? My thought was to upgrade to Windows 7, use this version of bootcamp, Windows 10 upgrade together but alas, the iMac of retina does not support Windows 7. I have to get an ISO of Windows 8.1 and I hope this can work...
Stuck in bootcamp *.
W10 forced updates seem to be your culprit.
Please see
Windows 10 crashing, but don't know why.
http://www.MakeUseOf.com/tag/take-back-control-driver-updates-Windows-10/
Maybe you are looking for
-
Video calls on Chromebooks?
Is this to come at all? I'm going to buy my parents a Chromebook (it's just easier for them) and if it is not a way for them to make the video calls via Skype on that OS so I have to transtition them on Google Hangouts. I'd rather not (they're old an
-
After the upgrade of Windows 10, I need to set up my HP printer so work functions. I've looked everywhere but can't find my CD for my Deskjet 1050 all-in-One J410 series printer. I have everything, including my FedEx slip sent to me with my current
-
Administrative controls missing - so can not change anything
I was given a used computer with vista. I can't change all accounts due to lack of administrative rights. How can I give my account of the administrative rights
-
Connectivity with other VSS VSS
Dear, I would like to confirm on the VSS structured design. We can connect 2 VSS back-to-back as the core and Distribution? I saw 1 Cisco document that give me only limited information with only the domain ID will be different on the two back to back
-
Emails. Non - delivery.
Hello. My first question is: when I send an email and made a typo error in his address, so it never 'bounces' me with a warning saying, she was not delivered. It always happened with my previous Outlook Express before Microsoft took over and introduc