IMac Intel core duo under snow leopard. Leopard stuck in the drive disk goes to blue screen

Similar Questions

• iMac under Snow Leopard - SCANNER COMMUNICATION CANNOT BE ESTABLISHED: HP LaserJet CM1415fnw

  iMac under Snow Leopard, reverend 10.6.8. New HP LaserJet CM1415fnw

  Printer works, emailing and printing of documents wireless; However, scan has already worked.

  I have my printer works wirelessly...

  I've updated to the last s/w Snow Leopard by Apple as of today.

  I cycled power on the iMac, and the printer HP several times.

  On iMac error message when try to scan: SCANNER COMMUNICATION CANNOT BE ESTABLISHED: HP LaserJet 300 colorMFP M375nw is currently unavailable. Make sure that your device is turned on, check the connection and make sure that your network is working properly. If these conditions are correct, restart the device and try to scan the image.

  Hello

  According to the error message, it seems like test software communicates with a different printer than the CM1415.

  Open the HP Scan 3 application, located under Applications > Hewlett-Packard.

  Click HP Scan in the top menu, then click Preferences.

  Be sure to select the HP Laserjet CM1415 drop Scanners, close its window and click on the scan button.

  You don't see any cdifference?

• Is there a CS2 for an iMac with Intel core duo processor, 2006?

  I have an imac of 2006 with Intel core duo running on OS 10.6.8 (snow leopard) and I can not install any later operating system on my computer.  Is there a version of Photoshop, I can install it on my computer?  I can buy an unopened, full retail install version CS2, but the specs say that it is only good on a Mac to be able to.  I find no indication than ever, there is a version of Intel - what are my options?

  .. before someone suggests I buy a new computer, I'll put it simply: Yes, I know that my computer is a dinosaur. I can't buy a new computer for the moment.

  Thank you!

  I can buy an unopened, full retail install version CS2, but the specs say that it is only good on a Mac to be able to.  I find no indication than ever, there is a version of Intel - what are my options?

  There is no Intel of CS2 version. It's only PowerPC.

  That said, OS X 10.6.8 can run PowerPC applications but only if Rosetta is installed. Rosetta is not installed by default on Snow Leopard.

  Relocation of Rosetta | Macworld

  That said, you are only entitled to use the CS2 without activation link above if you already have a CS2 (or earlier version) license.

• Corresponding printer does not not under Snow Leopard

  Matches the corresponding printer does not not under Snow Leopard, printers appear in the windows and by default, but when you print you get pages and pages of error messages.

  I tried to print the word "test" in Notepad, you press on print, cancel the printer after seven error pages and random characters, I could even begin to reproduce it for you.

  Tried on my Unibody Macbook and iMac, same result.

  VMWare Fusion 2.05, Windows XP Pro SP3

  ratkat, I see a lot of ugliness in your papers...

  2009-08-29 10:45:22 no printer not configured or not available

  As well as many errors which look like: < error >: CGBitmapContextCreate: not supported combination of parameters: 8 integer

  I would try to uninstall merge, restart and then reinstall Fusion, restart and test from there.

  The only thing I noticed about snow leopard updates is an occasional permission problem, so this could be a sign of this.

• How can I get a keyboard Pro of Apple iMac for 17-inch iMac (mid-2006), 1.83 GHz Intel Core Duo

  Where can I buy an Apple pro keyboard for an iMac

  17 - inch iMac (mid-2006), 1.83 GHz Intel Core Duo

  Model identifier: iMac4, 2
  Number: MA406XX/A

  Council areas & https://www.google.com/search?hl=en = 1 & site = webhp & source = HP & q = % 2FA m9034ll + Key & oq = 2FA % M9034LL & gs_l = hp.1.1.0 l 2.155...

• What can refresh from mackbook 3.1 under snow leopard 10.6.8

  What can upgrade to more mackook 3.1 under snow leopard 10.6.8. machine is fan swirling a lot.

  10.7.5 lion.

  (139223)

• I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  External DVD USB drives are cheap. Usually $20 for a good quality player. Just buy one of these at Best Buy or another store and use it to install Snow Leopard. Then you also have a drive for something else that you have on the disk.

• No matter what video played in my firefox always flashes. My operating system is Mac OS x 10.6.8 running on the processor intel core duo. 32-bit computer

  Whenever I watch videos on firefox, it continues to blink away. The issue is not reproducible on Safari. My MacBook works on intel core duo 32-bit with 1 GB of RAM

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options (Preferences on Mac or Linux) as follows:
     • In Firefox 29,0 and above, click on the menu button

       

       then select Options Preferences on Mac or Linux, or Windows.

     • In 28.0 Firefox and earlier versions, click on the Firefox orange upper-left button, then select the 'Options' button or, if there is no button up Firefox, go to tools > Options.
  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Is my iMac (Intel Core i5) 32-bit or 64-bit?

  Is my iMac (Intel Core i5) 32-bit or 64-bit?

  64 bit.

  All the 'I' are 64-bit processors used by Apple. The last iMac with 32-bit processors was additionally supported by end 2006.

• Re: Satellite A200-1TS - can I upgrade the CPU Intel Core Duo T7800 mobile

  Hello

  I have a laptop toshiba Satellite A200-1TS with processor intel core 2 duo T7500 mobile.
  Here is my model: http://ark.intel.com/Product.aspx?id=29761&processor=T7500&spec-codes=SLA3N, SLA44, SLADM, SLAF8,.

  I want to change the processor with Intel core duo T7800 mobile.
  This is the model: http://ark.intel.com/Product.aspx?id=31729&processor=T7800&spec-codes=SLA75, SLAF6

  Is it possible to change this?
  Because is not a diference betwwen T7500 and T7800.
  The only diference is that T7800 has 2, 6 GHz. And my motherboard supports any other procesors as T8XXX or T9XXX?

  Thank you

  Why do you want to upgrade?
  Only due to the fact that the new processor takes in charge the 2.6 Ghz instead of 2.2 Ghz?

  To be honest, you will notice no no performance gain after these updates.
  Of course, the processor is faster, but would not really noticeable.

  In addition, you should know that a CPU upgrade on laptop is very complicated.
  First disassembly of the laptop is really complicated. It may be damaged other parts during disassembly procedure and more, you will lose the warranty.

  Theoretically, this processor should be compatible, but as much as I know the Toshiba does not support updates and there could be a conflict of BIOS.

  So I would not recommend these updates.

  PS: Check your chipset and look at the Intel page for more information about the various CPU media.

• I have a dell pc n series (Intel core duo) it take too much time starting last I started at 3: 00.

  Original title: problem in multidisciplinary

  I have a dell pc n series (Intel core duo) it take too much time starting last I started at 3 a.m. what will I do?

  you have eliminated the problems of virus/malware?

  have you recently installed on the computer or updated drivers, etc?

  See: http://windows.microsoft.com/en-au/windows/optimize-windows-better-performance#optimize-windows-better-performance=windows-7

• Error installing CS3 Design Standard on iMac under Snow Leopard (10.6.8)

  I had a fully functional installation of CS3 on my iMac (Intel 2.16 MHz) and had a hard drive crash.

  After replacing the hard drive, I reinstalled from my original disks, but get the following message is displayed:

  "License for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance.

  I uninstalled the program (and ran the cleaner Adobe CS)... then reinstalled.   Same message.

  I contacted Adobe installation media and told me that it is a product and they are unable to offer support. I find this unsatisfactory response to a minimum.

  I'm puzzled because these programs were run very well before the crash... and all other software are back.

  I need this feature, but cannot afford to move at this time.

  Suggestions?  Thank you.

  Try http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

• run Mavericks desktop under Snow Leopard?

  Hello

  I have 3.1.3 Fusion running on my MacBook Pro with OS X 10.6.8. I hesitate to take the free Apple to the Mavericks update because I'm perfectly happy with my OS and I don't want to suddenly have a whole bunch of updates of music dear to perform. But I need to do a little test of some sw in Mavericks. So I thought I would create a virtual machine using my OS x 10.6.8 install disc supplied with my MacBook and then let Apple upgrade the virtual machine to the Mavericks. But the merger just sort of recognizes the DVD, it seems - he knows it's an OS X installation disc, but it doesn't give me that versions of the operating system to choose in the drop-down list server (and if I choose one and go ahead, the virtual machine does not start).

  So, my question is, how to get a desktop Mavericks OS on a virtual machine running on a host of Snow Leopard? I don't mind paying to upgrade to Fusion if it is a path to the solution, I don't want upgrade if it does not get me where I'm going.

  Thanks for any advice you can offer,

  Warren

  Well, a lot of problems with it.  You cannot virtualize 10.6.8 copy that came with your computer for two reasons: first, only the commercial versions of Mac OS x (not those that come with the computer) can be virtualized under the EULA.  Secondly, only 10.6.8 Server versions can be virtualized under this particular EULA (i.e. a changed with later versions).  You can buy a copy of 10.6.8 Server edition of apple by phone for about $20 (or at least you might a few months ago, but you can't upgrade the host operating system and have all the baggage of running server.)

  You could download installer 10.9 and create a new machine virtual own from scratch, but there are a couple of other challenges: Fusion 3 supports virtualization 10.9.  You may need to level and later what to do, can not run on 10.6.8.  It is also probably a violation of the EULA to virtualize 10.9 on 10.6.8 (edition of the same server), and it will not work even if your machine does not natively support 10.9.  You might also encounter issues if you have a Core 2 Duo machine (most of the vintage 10.6 machines are like that) - since it has only two hearts and 10.9 VM require 2 hearts are working properly, you'll be starving the host for CPU cycles.

  Since 10.6.8 is outdated and is no longer supported by Apple (not even security - patches if you are high risk on the Internet), one possible option is to upgrade the OS host to 10.9 (even once, assuming that the machine can be improved), upgrade to buy Fusion 6 (or 7 to be released soon), the 10.6.8 apple license and create a 10.6.8 VM (which should have only a single core) for the old programs you don't want to update.

  Otherwise, the only real option is to dual-boot from an external drive or a partition of the internal drive - a partition for 10.9 and 10.6.8 and boot back and forth between them.  This one, you can do with the license 10.6.8 customer provided with your machine.  But make sure you have a very good backup - and no time machine (it was notorious for silent corruption in the pre versions 10.7 and VM backup is not good at all).  I recommend Carbon Copy Cloner of www.bombich.com to create a complete clone.  You might even clone the machine on an external drive, then upgrade this clone to 10.9 (assuming that other software licenses are not violated with two installs of course).

• Cannot install Final Cut Studio under Snow Leopard

  I get the following warning when you try to install Final Cut Studio (version 3.0):

  ' - Final Cut Studio Installer requires that your system has 128 MB of VRAM; This system has only 0 MB of VRAM.' and

  ' - Final Cut Studio Installer requires that your system has a Quartz Extreme compatible video card. »

  I find it curious as I used to have FCS installed on this machine - but because of the disk hard failure I have done a clean install of the new. I vaguely remember getting hurt when I upgraded to Snow Leopard (years) but there is a solution because the software was already installed. All the suggestions of the community?

  My specs are:

  Mac Pro 1.1

  2 x 2.66 GHz Dual - Core Intel Xeon

  4 GB 667 MHz DDR2 FB-DIMM

  ATI Radeon HD 5770

  OS X 10.6.3

  A Mac OS X Combo update fixed this problem. The computer was not connected to the internet since installing the new hard drive and I remembered that the video card was not the original. So I connected and performed the update of the software and now Final Cut Pro is fortunately installation.

• Snow Leopard on external hard drive, but with the help of El Capitan on my iMac 5 K?

  Is this possible to do? I have an old hard drive lying around, and I want to use older programs that are not supported by the newest OSX.

  Can I simply install snow leopard on this external hard drive and just boot up to it through my new iMac end of 2015?

  I know its possible with a virtual machine, but are there other ways to do it right?

  Thank you!!!

  It is only possible when running Mac OS X Server 10.6 inside a virtual machine.

  (142649)