iMac very slow and short HOT.  the fan runs almost constantly

Similar Questions

• Pavilion g6-1165 his: the fan runs almost constantly

  Hello. My fan turns quite continuously. I just installed a new HARD drive and the data is restored. I remember I had this problem some time ago and I cured it by updating the BIOS. This time, I have updated drivers up-to-date and don't get any yellow excalmation point on Device Manager. I've updated the BIOS. I looked at the openings on the underside, and they have clear air. I went into the Task Manager and stop any program that shows the use of the processor (like chrome) and it is still ongoing. The air coming out feels quite warm. I took it outside to see if a burst of cold air he'd stop, but that did not work. I don't really want to disassembly to clean the ventilation openings when they have clear air from the outside. Any help much appreciated woiuld. Thank you.

  Thank you very much for your answer. It seems that there is dust of vision when I blew air compressed as described on the HP website a large amount is released. The fan has kept silent since. Thank you once again. Problem solved.

• Re: My Qosmio F60 - 11f is VERY SLOW and stuck all the time

  Hi everyone :)

  I have a qosmio f60 - 11f with 2.26 to 3.3 with turbo i7
  6 GB of Ram
  640 GB HHD
  1 GB Nvidia GT330M graphics

  the problem is that since I bought it and its slow I don't know why!
  Now the laptop over 14 months and I did a lot of recovery time because of problems and stuck, I him.
  last day I did the cover and I noticed that the laptop is becoming slower!
  It takes about 5 minutes to get started! not only that, after started and open any folder you will notice how slow it is. Even in the videos I can't open it because the laptop will be stuck and play the video very very slow!
  Please help me.

  Hello

  First of all I recommend to check the HARD disk for disk failure HARD errors that may affect the performance of the computer, you should check the HARD drive using freeware tools one of the tools that I use is the Drive Fitness Test he has been published several times here in the forum and its really great software.

  If the HARD drive would be ok and if no error would be detected, then, I recommend disabling some processes that are not important for you in many cases different tools would be charged during the OS start process and these tools run in the background that slow down the operating system.
  Run msconfig and check the Startup tab
  Here you will see all the programs that are loaded at the beginning, you can uncheck the tools is not necessary

  Note: If you are not sure what means the only process, use google and search in internet for more details otherwise don't disable this.

• Games led by 7 Microsoft running very slow and draggy

  I still have a problem to play all the games on my new computer, which is managed by Windows 7.  The game runs very slow and response of the mouse and other controls are slow and draggy.  Please notify.

  What video card you are using as well as the model and brand of PC?

  Have you updated all readers more recent? If this is not the case consult your OEM and download all the latest drivers for Win 7

  MCP. MCDST. LVL 80

• Satellite A30-514 is very slow and how to repair the cooling fan

  My laptop is now very slow. Power on the need to use F1 at startup and it is also quite the slowness of the process. My machine has 512 MB of RAM, but shows only 480 MB on Control Panel. It is believed that it's a RAM failure that made the slow machine or something else. I tried maintenance but did not help.

  Also any what has got the details how you can open the unit up to service the cooling fan as the machine heats up a lot and need a maintenance operation.

  Thank you

  Janak

  Regarding the problem of slower. Perhaps?

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15340

  Concerning the problem of heating. Perhaps?

  This can help because it shows different disassembly guides model hough, she did not directly mention the A30. He mentioned a problem of heating with an A35.

  http://www.irisvista.com/tech/index.htm

  You should take note of this warning on the page well!

  Quote
  "WARNING!" Do not disassemble your laptop if it is still under warranty because it will void the warranty of the manufacturer of the laptop. I am not responsible for any damage you can cause to your laptop.
  End of quote

• The machine is very very slow and constantly beach balls, System wiped 3 times by Apple store

  I have a 27 June 2015 iMac 5 k, 3rd two precedents as a failing. I upgraded to 24 GB of RAM and use PS CC, Lightroom with two plug-ins software nick Imagenomics.

  the machine is very very slow and beac balls constantly...

  Sometimes, I visited pirate bay re music but all f my software is legitimate...

  I have taken e machine to my local application, e store twice, claiming the material is good, but the software is obviously not correct that they admit that it's very slow, so they wipe the machine and system restore...

  sound she's like going round a roundabout...

  Help

  So, what operating system Mac are you on? You are not running an iMac on iOS.

  The Apple store actually erase your entire hard drive or they just install the OS on top of what you have?

  If you downloaded from any type of torrent/pirate bay Web site, there are some that will include a few unwanted songs (like bloatware/adware/malware) with their free software, especially if this software costs money elsewhere - for example, you might have installed something that will not be fixed by installation of operating system unless all of the hard disk will be deleted first. You can view the results after you run this small diagnostic tool of one of our employees of Developer:

  http://www.etresoft.com/etrecheck

• Since Firefox 13.0.1 my scrolling speed is very slow and lazy. Disabled all the plugins still don't work. Any difficulty? I HATE IT!

  As soon as Firefox when through it's automatic 'upgrade' the scrolling action became very slow and lazy. I tried all this suggested (disable plug-ins, re-installing Firefox, restart the computer, etc.), but I still can't get back to the way it was. Is there a fix, or how can I re - install the older version that worked so well? I HATE THIS!

  Hello mjg263, firefox 13 introduced a scroll smoothly by default - it might not work well on older hardware.

  Please, try to update your video driver or if this does not improve the case you can disable scrolling smoothly in firefox/tools > options > advanced > general.

• Halo 2:When I use my mouse on the line, the cursor movement is very slow and jerky.

  original title: halo 2

  Hello... Just installed Halo 2 on my Windows 7, 64-bit desktop.  I have all the latest drivers. All other games work fine.

  When I use my mouse on the line, the cursor movement is very slow and jerky. Unplayable.

  I was looking for a patch for the game or suggestion on how to correct adjust them.  I tried the option in game of adjustment of moving the mouse, but it did not help.

  Suggestions please...

  ----------------

• installed the new windows Friday and since my computer is very slow and not connecting to internet properly

  installed the new windows Friday and since my computer is very slow and not connecting to the internet correctly... anyone else having these issues?

  System Restore to go back before the show.

  I suggest you to install the updates one by one and reboot the computer after installing each update to verify that update is causing the problem.

  Also note the updates that you install on the computer.

  Once you come to know what update is causing the problem, let us know.

  Do not install any driver updates offered by Windows Update. Find them in the manufacturer's website instead.

  Try a convenience store

  Windows includes two programs of troubleshooting that you can use to automatically fix some common problems with performance on your computer or to the maintenance of your system.

  Open the Performance troubleshooting utility by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click check for performance issues.

  Open the of System Maintenance Troubleshooter by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click run maintenance tasks.

  08/14 / 1115:46: 45 pm UTC

• Windows XP is very slow and auto update works but when I try to run internet explore the system times out. »

  Original title: Windows XP runs very slow

  Windows XP is very slow and auto update works, but when I try to run internet explore the system times out.

  Hi Bill,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the error message that is accurate or complete?
  2. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the links below and check the issue:

  Maintenance tasks that improve performance:
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Slow PC? Optimize your computer for optimal performance:
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=R7qdKIMaJyT

  Warning of Chkdsk.
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Internet Explorer is slow? 5 things to try:
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• do not sleep when I close the lid of the computer. Everytime I open the lid there is message that computer prepares to lock, then go to the login page. Computer gets too hot and the fan runs constantly

  I have Dell laptop with vista .lately my computer stop to sleep when I close read although the power option have been that he sleeps when the cover is closed. Everytime I open the lid it is message that ' the computer prepares lock ' and in a few seconds, it goes back to the login page. during computer work becomes too hot and the fan runs constantly even if I close the lid.

  Hello

  Follow these steps:

  
  Step 1: I suggest you to download the latest drivers for the graphics card and install it on the system and check. See the article mentioned below.

  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  Step 2: disable the Option "Allow this device to wake the computer" for a device

  a. open the control panel.
  b. click the Device Manager icon.
  c. click on continue in the UAC prompt.
  d. right-click on the network adapter and click Properties.
  e. click the power management tab.
  f. uncheck allow this device to wake the computer.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I have a 4TB vdisk and it occupies space is 2 TB and the remaining space is free but it is very slow, what could be the possible reasons and give the solution for this.

  I have a 4TB vdisk and it occupies space is 2 TB and the remaining space is free but it is very slow, what could be the possible reasons and give the solution for this

  Assuming that you are talking about disk space from in the guest OS. You are probably using an MBR partition table, which limits the maximum usable disk space to ~ 2 TB. In order to use the entire disk space, you need a GPT partition table.

  André

• 30/31 of Firefox is very slow and plant constantly?

  Hello.
  Since I updated to 30 FF, I find it VERY slow and it blocks many times a day. I was happy when version 31 is out because I thought it would work better, but it doesn't.
  The pages take forever to is to load, most of the time they will not and I have to recharge myself and then maybe they are responsible.
  Also, it crashes all the time. I noticed it's on down each time that it kind of "freeze" or when it is something big, which is not at all big load. I've never had this problem before, but have been dealing with this for months now and I'm tired instead.

  I think I have almost tried everything. Even uninstalled. I'd appreciate any help, as I would like to continue using it. Thank you.

  So far, your look of reports of accidents like these;

  Signature OOM OutOfMemory

  Signature coreclr.dll

  Signature gfxContext

  Total virtual memory 2147352576

  Available virtual memory 243638272

  System Memory Percentage use 89

  Available swap file 2438729728

  Available physical memory 346771456

  OOM 2064385 Allocation size

• The fan runs continuously. Firefox unresponsive, slow.

  The fan runs continuously. Firefox unresponsive, slow. While all slow running. Reboot and it's ok for a few seconds and then back to fan works etc...

  Reset the SMC reset management system (SCM) controller on your Mac - Apple Support