image capture multi-channel web publishing

Similar Questions

• Simultaneous multi-channel Imaging NI PCI-1422 or 1424?

  We have an IMAQ 1408. We want to make simultaneous multi-channel imagery. However, 1408 has only 1 A/D converter, it cannot acquire multiple channels simultaneously. We are looking for possible upgrade.

  The NI PCI-1422 or 1424 seem to upgrade products of 1408. Can someone tell us if they can do simultaneous multi-channel Imaging?

  Sorry if this isn't the right forum for me to post this question. But I called the customer service OR. The guy doesn't really know acquisition cards. I think that there are more experts here.

  If you have analog signals, it is a little more difficult.  NEITHER ensures more hardware to read signals from analog cameras.  I don't remember all of their equipment, be capable of more of an analog input signal simultaneously.  They always alternate between the signals, a reading at the same time frame.

  Your best bet would be to get an analogue to digital converter which converts the formats I've mentioned.  You must make sure it is compatible (uncompressed, industry standard, etc.).

  Bruce

• Imaging multi channels using the acquisition card OR

  We have a 1408 IMAQ being controlled by LabVIEW 8.0.

  We want to install multi-channel of imagery. All the channels work individually. However, when I was trying to show two channels simultaneously, single channel works and I got the following error message:

  Error 1074397150 has occurred to IMAQ enter Setup.vi

  Possible reasons:

  NOR-IMAQ: A timeout error occurred while you wait for the specified event. If you expect a picture, make sure all the video data is acquired during the period. If you wait for a signal, check that the assertion of signal occurs within the period.

  Sometimes I get a different error message asking me to assign different buffers to both channels. I understand that IMAQ 1408 has only analog digital (ADC) converter to digitize the incoming video. It may acquire up to four different cameras, but only of a camera at a time.

  I don't mind do frame rate in half. I think to show only one channel at a time and do the two channels alternantly. But I need to know how config routes to get there.

  I've attached an example that should work.  I could not test it because I don't have the equipment, so it might need some settings.  I would test it with one channel by setting the channel # 1.  Once it works, define channels # 2.  I set the display to use snapshot mode so the same image can be used for all screens.

  The only reason that I can think of that would make multi-channel acquisition fail when single channel works is the lack of synchronization between signals.  The start of frame signal must be the same for all channels.

  Bruce

• several images capture and read their path to send the byte array to the web service

  Hello

  Have a problem when the image capture, the requirement is to open the camera and capture multiple images, and once done it should send the array of bytes to the web service, wrote the class with reader and Video Control of the code and then using the saved file to store image API, but when the user capture multiple images it replaces previous if I keep the path to say dynamic by using the date and time then how I just know what images are recently captured and their path, one time I know that the path of recently captured using new fileconnection images can read the image byte array.

  Hi Nishant,

  find the attached code. In this demo, you will find:

  (1) the use of the listner log file system

  (2) how to move data from one folder to another.

  (3) how to read file system byteArray.

• Image capture does not recognize scanner

  I have three Macs. An old iMac (early 2008), MacBook Pro (early 2011) and a newly acquired iMac 4K retina. All are running 10.11.4. I have an Epson Perfection V370, who is about two years old attached to the new machine. She was attached to the old iMac Image Capture when he recognized without problems. On the new machine, which it is now fixed, picture Capture is no sign of him and nor does the component prefs printers and Scanners. He appears in the USB of the app information system section. It works very well with Epson Scan and also with VueScan. I downloaded the latest driver on the Epson web site with no change in this behavior.

  Someone at - it clues as to how I could do this job?

  I have now found the solution to this Epson buried on site. What I had to do was run Capture of Image, choose "Devices to TWAIN Reset" on the file menu and restart the Mac. The scanner then appeared in preferences, printers and Scanners and today works with the Image Capture. The page on the Epson site says I need to uninstall Epson Capture and reinstall. I found that I didn't have to do.

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?useCookie=Yes & infoType = FAQ & oid = 280430 & foid = 288596

• The web publishing tool to send data to an external web server?

  We have a customer who wants to be able to see the LabView to test the results of their office. At our office is located behind a firewall and, therefore, to allow access to the web server or something else would have open access to the outside world and I don't want to do that. Can the web server web publishing LV tool publishes to be external to the Organization? For example, you will need to use FTP credentials to access the external web server? Any information would be greatly appreciated.

  Hello

  I don't see a way to do it with remote façade panels. However, you can take a snapshot of your façade periodically and save it to the FTP server. In this way, the results of the tests are available on the FTP site.

  To save a snapshot of the façade, you use the VI reference (functions > programming > Appilcation control > reference VI Server), invoke the node (functions > programming > Application Control > node call) and the VI 'Write the JPEG' (functions > programming > graphics & Sound > graphic Format > write the JPEG file). VI reference to the reference of the thread invoke node entry, choose the front > get the Image method, and then wire the data output of the Image to write JPEG file VI to save it as a JPEG file on the FTP server.

  I hope this helps.

• How to add an edge animate Web publish FL EPUB 3 for iBooks.

  In this post, I understand that it is not currently possible to place .oam animations in InDesign.

  Edge has a Web publishing option, which generates output an html, images and javascript files folder.

  How can I add these pages to my EPUB created in InDesign? I use the version of 2014, with the option to export of fixed provision.

  I guess it's a question or add my items to the manifest and rename the HTML that Edge gives me... But I guess there are many more steps.

  My intention is to publish this on the iBook Store.

  Thank you

  HA! You forget the power of bugs engineering and commercial realities which, in my humble OPINION, are often more powerful than of bad intentions.

  Ask yourself the following question, the InDesign team is more or less embarrassed are you with Apple? We wrote all this code, we wanted it to work, it didn't work. We are sad or are we happy?

  There are really a lot of moving parts that are only partially under the control of the InDesign team, the team of iBooks and the Webkit team and everything must fit to work. It's just the way it is.

  When we animate edge stick us in a

• Export images captured with a Transparent BG?

  Hi all

  It has been a minute since I've been here. Was buried in a blender. Laughing out loud. I forgot how to export my images captured with only my player on a transparent b octies someone? Maybe a screenshot of report please?

  

  Looks like you already pulled the key.  You're ready to render in a bin & codec which will support alpha channels.  Personally, I would use quicktime movies in the PNG codec.  Add the model to the queue and rendered in the output module, configure it to PNG, RGB + Alpha, in Millions of colors + and straight (NOT premultiplied).

• iPhone 5 s 10.0.2 update cannot use image capture

  I have a mac pro running 10.6.8. Since I upgraded my iphone 5s today 10.0.2, I am unable to use Image Capture on my mac to transfer your photos, iphoto does not work either. I get a message on my phone to the computer I chose to 'trust', then I get an error message in the Image Capture in saying that I have to enter a password on my phone but the password is not displayed at the time.

  Hello pwexford,

  Thank you for using communities of Apple Support. It is my understanding that you were unable to use transfer pictures from your iPhone to the Image Capture. It is very important to save valuable images of your phone. I want to make sure that you are able to transfer this content correctly.

  His expected behavior to be prompted for a password if the phone is locked. Please, try the following steps.

  1. Connect your device to your computer, and then turn on the unit.

     If the device is locked with a password, enter it.

  2. In the Image Capture, select the device from the list of devices.
  3. Use the buttons at the bottom of the window to Capture of Image to display thumbnails in a list or as icons to change the size of thumbnails, or to rotate or remove images.
  4. In the pop-up menu to import to, choose where to save images or what application to use to open the image.
  5. To import only some of the photos, select the photos you want, and then click Import. To import all the photos, click Import all.

     Choose AutoImporter menu drop-down ' connection opens this [device] ' to transfer images from a device to your computer whenever you connect it to your computer.

  6. Select "Delete after import" to remove parts of the instrument after transfer to your computer. You can also select individual items on your device, and then press Delete on your keyboard.

  Image capture: Image transfer and other elements of your device

  Have a wonderful day!

• PDF Image Capture files

  Since the update to Sierra (although I can't say that this was the cause of the problem), I have a problem when parsing and saving documents in PDF format using the image transfer application. A PDF file is created but when I open the pages are naked with perhaps only sometimes visible top line (and which appears at the bottom of the page!). This problem occurs only when I choose the PDF format; If I choose to save as an image file (PNG, for example), it works fine.

  My printer driver is up to date and if I use software of third parties (e.g., HP Scan) this problem is specific to the application of Capture of Image so I can create PDF files successfully.

  This problem occurs on my iMac Mini and Mac Book Pro which have been updated for the last OS of Sierra

  You see the problem even if you scan to PDF using Preview?

  I use an excerpt instead of the Image Capture to do this and he continues to work very well in the Sierra AFAICT. I'll try with the Image Capture when I get the chance, just to compare. He used to work as well, but I've not scanned with it in quite awhile.

• image capture does not work with the epson scanner after macOS sierra upgraded

  Image capture no longer works with epson scanner v800 after upgrade. I installed the new drivers from epson, and it still does not work. Just says: "waiting for scanner", but nothing ever happens.

  Drivers Epson macOS 10.12.x specific https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=256062 & infoType = Do wnloads & platform = OSF_M_X12 do not work?

• Image Capture App combining OS Sierra files

  Hi I have a problem with the application of Capture of Image integrated into the Apple OS since the update to the Sierra. Before the update I scan documents into the feeder of my MFP as a PDF file and select 'combine them into single document option. of course, I get a PDF file with the scans in. I would then analyze an other internal documents and again, I would get another PDF document with them in.

  Since the update OS Sierra and using the same settings as the first PDF file is created in the end, however when I go to scan the next set of documents Yes it creates another PDF file with these files in but she also adds the previous set of scanned files to the same doc. This continues for each subsequent set of scanned files. The only way I managed to prevent this must either exit the Capture Image soft after each set of scanned documents or in the test results window, select the magnifying glass next to the analysis the folder Apps of Capture Image temporary Doc and send these files to the trash. It's as if the app is no longer clearing Temp files between scans automatically.

  Details: OSX El Capitan of OS Sierra. MFP to use Lexmark XC2132 Via USB 2.0 connection. Image Capture worm 6.8

  Hi Simon.B82!

  I see you have a problem with the scanning of documents in the application of Capture of Image.  I know it's important to have your applications work correctly, and I'm happy to help you.  To further isolate the issue, please create a new administrator account on the Mac.  A test to see if the problem of scanning is always present in the new user account.  Here are the instructions:

  How to test a question in another account on your Mac.

  Thank you for using communities of Apple Support.

  See you soon!

• image capture does not recognize my iPhone when I connect to my mac?

  I have the iPhone, when I connect it to my photos of mac does not open... How can I put on it to open it

  Hello rosrich,

  If I understand your message that you are eager to the Mac to open Image Capture when you connect your iPhone so that you can import the photos. I would like to have the possibility of having an auto app launch when I connect my iPhone as well. I'll be happy to help you with this.

  If you go ahead and open Capture of Image and then connect the iPhone, in the lower left corner, you will see the name of your iPhone and the "connection this iPhone opens:" you have the option to choose what app that you like. So if you want Image Capture to open when you connect your iPhone, you would select which. If you want pictures to open, you would select Photos instead. Information on the AutoImporter lies in the following article:

  Image capture: transfer images and other elements of your device

  Thank you for using communities Support from Apple. Nice day!

• Import Photos with Image Capture

  Hi people, I do not know if I am posting this in the right forum. If this isn't the case, feel free to have moved him.

  I did some research trying to help this user and also to learn.

  Import all pictures (including photos from iTunes backup) iPhone to mac

  I have a Mac and a PC but I use the PC for my main photo library. When I import pictures from my iPhone to the PC using the Import Wizard, Windows 10 maintains a cache to remember photos that have been previously imported so that they don't re - import. I can post the path to the cache but it is useless, the cache is a file system, called "PreviouslyAcquired.db".  If I remove photos from my PC which have been imported and you want then re - import, I have to reset this cache (delete) so that the photos to import again. Otherwise the photos already imported are ignored and only new ones appear on the Import Wizard.

  The reason for this post is that I wonder if OS X (Photos or Image Capture) retains the same type of cache. I also wonder if this is the reason why the OP on the wire above cannot re - import the photos that have been restored from their old iPhone.

  So my questions are:

  (1) with OS X Image Capture, can a photo to reimport previously imported?

  (2) no OS X maintains a similar to Windows cache and if so where is it and how it is reset? I looked on my MBP 10.11.5 but nothing helped. It is obviously not the iPod Photo Cache - that one is associated with iTunes synchronizes only. I also started the Image Capture, but cannot see any parameter for this purpose.

  (3) I.C. will give me the opportunity to re - import if it imported the same before pictures? I could make an experience, but the bright minds here probably know the answers.

  Any info appreciated...

  I have found no Apple documentation on it, but when I use the Image Capture to import from a camera or card in a folder in the Finder, I can import the same items over and over again. There is no control for imports carried out previously.

  Only when I import using a photo app that maintenance photo library (Photos, iPhoto, Aperture) pictures will be checked for duplicates when importing.  But even with Photos, iPhoto, Aperture can I restore deleted photos by import since the device again, if I removed them from the library.

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.