Image of corrupted task of disk defragmentation
When I try to defragment my hard drive a popup appears saying: "the task Image is corrupt or has been tampered with. User_Feed_Synchronization-{93869917-6BA9-4AC4-AfOA-1FOB2672 A8FA}. "I went into the Task Scheduler Library to try to change the settings and the same popup upeared. So I deleted the defragmentation task and put in a new defragmentation task account new parameters and the following window will appear: "an error has occurred for task defragment the hard drive." Error message: user account restriction error. Possible reasons are that blank passwords not allowed, or as a political restrictions has been applied. »
I can't adjust the defragmentation to run if the user is logged in or not. It keeps the setting because only when someone logs on and only at 01:24:12. I can't change the time of execution. Whenever I put new triggers for the task the first popup appears and everything remains the same. The last execution in Scheduler bed '' never. ''
I have run full scans computer virus/malware with Microsoft and Charter Security Suite, and they came up empty for the problems.
I'm not very computer savy and don't know what I can do. My best guess is that someone put a virus in my hard disk to mess with the defragmentation task, but nothing in the scans rises.
Any help would be appreciated. Thank you, community.
It would be a good idea to run the System File Checker tool if you have corrupted files
"How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.
If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:
"How to perform a repair for Vista Installation"
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
_________________________________________
Here is some information about the Vista defrag and a good alternative to use:
The Vista defrag works quietly in the background without intervention on your part
http://support.Microsoft.com/kb/942092
In Windows Vista, there are a lot of improvements in the defrag engine and handling of fragmentation. By default, Windows Vista uses Task Scheduler to automatically keep the defragmented hard drive. This Automatic defragmentation does not affect the performance of the Windows Vista operating system...
If you want to use a much better defragmentation program which is free and where you can see the results, I suggest this one:
http://www.Auslogics.com/en/software/disk-defrag/
See you soon.
Tags: Windows
Similar Questions
-
Disk defragmentation repeated after you install a Registry Cleaner program.
Original title: Disk Defragmenter
Hello.
I use Windows XP Prof and IE 8.
"After" install a Registry Cleaner program, a disk defragmentation task was executed, and he indicated that the volume needs to be defragmented. Subsequently, the task of disk defragmentation was performed again and he said that 'always' volume must be defragmented even if there is nothing to defragment (no red line showing).
'Before' installing the program Registry Cleaner, disk defragmentation task was performed and she would declare that the volume needs to be defragmented. Subsequently, the task of disk defragmentation was performed again and he said that the volume was already defragmented (no red line showing).
Why the registry cleaner would lead the program Defragmenter to 'think' that he needs to defragment even after this has been done (and no red line showing)?
Thanks in advance.
I will not bore to 'clear all' regularly because I can see the red error icon and the yellow warning icon clearly by scroll.
Bottom line: Defrag works so I will continue to "analyze" and defragment every day when there are red lines in the graph, but not worthwhile to defragment a second time, unless the red lines still appear.
Thank you 'a lot' to work on this issue with me - It is much appreciated.
-
I tried to plan the disk defrag to defragment every week, but it shows last run as my last manual defragmentation. I followed the instructions in this URL http://www.howtogeek.com/howto/windows-vista/configure-disk-defragmenter-schedule-in-windows-vista/, but still it does not work, showing my last manual defragmentation, I have windows 7, can you help me
Please[Moved from comments]
Hi Alicia,.
We would like to know more detail from you to help you better.
(1) have you tried to run the Disk Defragmenter using Task Scheduler?
(2) was your computer when you had scheduled disk defragmentation?
If you use a specific program on a regular basis, you can use the Task Scheduler Wizard to create a task that opens the program for you automatically on the schedule you choose. For the task, automatic disk defragmentation to happen of the computer or the Scheduler to work must be powered on.
Write us with the details asked. We will be happy to help you come.
-
When you try to start Disk Defragmenter, a popup appears; "Disk Defragmenter has been set with a different program.
Disk Defragmenter is currently using customized settings created by another program. Before you change the schedule, you should remove the custom settings. "with two selections: 'Delete settings' and 'Cancel '. By selecting a choice does not produce no result except in order to reproduce the same popup when attempting again to start the Defragmenter
There are several reasons why the built-in function may not work. Here are a few simple repairs:
0. it is malware on the system. Solution: Run an AV Control and also a spyware check.
1. the disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.
2. the disc is damaged and must be repaired. Solution: Open "My computer" and right-click on the drive you want to defragment. Select 'Properties' and click on the 'Tools' tab, select 'Check now' to check the drive for errors. Select the two options, and then click Start (it may take a long time and can restart the PC so that it can do the check at boot time).
3 Disk Defragmenter may be damaged, requiring a restore. Solution: Open System Restore and restore to a point before you start having problems with Disk Defragmenter.
4. Disk Defragmenter may no longer be on the system or is damaged while it needs a re - install. Solution:
a. open the menu 'start '.
b. type '% Windir%\Inf' in the 'Search' box and press 'Enter '.
c. in the window that opens, find the file named "dfrg.inf.
d. right-click on "dfrg.inf" and "install".5. There are other programs that run the Defragmenter interruption integrated. Solution: Close all running programs. If you think that there may be some running in the background, use Ctrl + Alt + Delete, and then select "start Task Manager". Under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."
6. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).
7. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with her and stalking the interference can not be easy (Note: some versions of Win 7 do not allow the built-in defrag utility is running in safe mode.) If your does not, let's say that defrag is disabled mode safe.)
You should consider to download a free trial of a commercial defragmentation tool.
Here is a link to a Top 10 reviews of the best defrag programs side-by-side comparison:
http://Disk-Defragmenter-software-review.TopTenReviews.com/
You can click on the product and it will give you details on its performance, features, how he did on the exam, etc.
Top Placer will automatically Defrag in the background and the gold medal prevents fragmentation before it happens and can instantly defragment the fragments of leaves who eats to get.
Most of the programs featured offers free trials so you can try them and see what they do for you.
Good luck!
PS: There are more radical actions to repair you can do. These generally handle most situations, but if not let me know and I'll post the other options as well.
-
original title: Hello! When I open the task schedule that I get the following error, task image is corrupt or has been tampered with. mcupdate "windows vista home premium SP2" tried various solutions can help.
cannot say exactly how much time I had this problem when I'm browsing I get windows does not quite agree FAQ
and when I'm srolling on a website that the page will start to develop until you can't do anything about this page, I have to continualy do right click and update
After a few seconds, I update again. I use norton 360,6 internet security and norton utilities, I do not know if what I am about to talk about has a prevalence.
about 2-3 months, I bought Uniblue powersuite, is not thinking that he could not work along side norton360 and utility. I uninstalled Uniblue powersuite:
as you know that uniblue accelerates, cleans your registry and defragments Tweeks your computer, as well as of other activities.
I tried windows help and support guide to find a solution, probably do not know what are the things to try.
can help you. or it's back to factory reset!
Hello
I suggest you perform the steps mentioned in the link.
task image is corrupt or has been tampered with. mcupdate
Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
Internet Explorer 9 is also compatible with Vista. If youstill would like to Uninstall IE9, follow the steps described in this document.
-
im getting this message if I want to run Disk Defragmenter... "Disk Defragmenter cannot start the Task Scheduler service is not running. Start the Task Scheduler service and try again. "tried to start the Task Scheduler on services.msc, but it gives me the message" windows could not start the Task Scheduler on the computer local error 2: the system cannot find the file specified. '. »
Hello
See if run the checker (SFC.exe) system files using the parameter/scannow help.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
http://support.Microsoft.com/default.aspx/KB/929833
Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience] -
Task image is corrupt or has been tampered with 0 x 80041321
When I try to do a monthly backup he want to do. It gives me the task image is corrupt or has been tampered with 0 x 80041321. I checked for the sheerstrakes & they come back clean. Can someone help me please?
Hello
I just thought that this solution given by karena on page 2 of this thread (about three entries down) was too broad. especially the part where he proposed deleting all subkeys.I had a similar problem with my sched task / tasks corrupt and the steps you suggested would not own tasks re-created to replace those corrupted.FAR the most complete way to solve the problem is by using regedit to tasks, as well as correct tasks corrupt in the system32 folder.all the steps can be carefully described to get the right solution in the following microsoft support article:MS10-092, specifically this support page: http://support.microsoft.com/kb/2305420
While it covers a problem in the sched task caused by a windows update, the real problem is exactly the same, with the same corrupt task messages.
This is the right way to solve the problem, he took a few steps, but it is not difficult. Just follow closely and difficulty only tasks that are a problem in your system.
It's the more thoroughly to solve this problem. -
Windows vista the task image is corrupt or has been tampered with (0 x 80041321) Please try again.
This happened after Windows update
and no solutions yet!
Dear Marilyn
nothing worked, finally I deleted KB2305420
now everything is OK
Anyway thanks for your help
SINA
-
Hey all,.
After trying 10 Windows for a bit, I decided to downgrade (via "Go back to Windows 7" in the control panel-> update of the security & -> Recovery Windows 10). Downgrade succeeded had no problem (at least at first glance), but for a number of tasks in the Task Scheduler, I am presented with the following message:
"Image is corrupt or has been tampered with."
I know that many of these tasks are not associated with Microsoft and others, but there is a lot I don't recognize yet. Having research this problem the only resolution is to either restore a previous backup or remove corrupt task (and restore if possible), however they contain is the problem, I'm not sure who I should restore (if any) and the restoration, any help would be greatly appreciated.
Listed here are all tasks afflicted (half I recognize as Microsoft non - joint moulding at the top):
------------------------------------
Uninstaller_SkipUAC
Uninstaller_SkipUAC_Adam
SmartDefrag3_UPdate
Razer_Game_Booster_AutoUpdate
Autoupdate1428970808
ISM-UpdateService-4e00205a-2ab1-4423-8f77-cc25b82cde1d-Logon
ISM-UpdateService-4e00205a-2ab1-4423-8f77-cc25b82cde1d
GoogleUpdateTaskUserS-1-5-21-3733489001-1365333202-4051452697-1000UA1cfe8d182f5048
GoogleUpdateTaskUserS-1-5-21-3733489001-1365333202-4051452697-1000UA
GoogleUpdateTaskUserS-1-5-21-3733489001-1365333202-4051452697-1000Core1cfea8d16814bdc
GoogleUpdateTaskUserS-1-5-21-3733489001-1365333202-4051452697-1000Core
GoogleUpdateTaskMachineUA1cfeba514c17243
GoogleUpdateTaskMachineUA
GoogleUpdateTaskMachineCore1cfeba513c0c761
GoogleUpdateTaskMachineCore
Update driver Booster
Reader BoosterSkipUAC (Adam)
CCleanerSkipUAC
Update BitDefender product Data_A17FD818A96743FAB28AC221BEB4B2C8
AdvancedDriverUpdater_UPDATES
Adobe Flash Player PPAPI notifyUpdateRecordPath
StartRecording
SqlLiteRecoveryTask
ReindexSearchRoot
RegistrySearch
RecordingRestart
PvrScheduleTask
PvrRecoveryTask
PBDADiscoveryW2
PBDADiscoveryW1
PBDADiscovery
OCURDiscovery
OCURActivate
ObjectStoreRecoveryTask
MediaCenterRecoveryTask
mcupdate_scheduled
mcupdate
InstallPlayReady
ehDRMInit
DispatchRecoveryTasks
ConfigureInternetTimeService
ActivateWindowsSearch
HotStart
BackgroundConfigSurveyor
RacTask
WindowsParentalControls
SystemDataProviders
SessionAgent
GadgetManager
AutoWake
IpAddressConflict2
IpAddressConflict1------------------------------------
Task of Bitdefender (Bitdefender product Data_A17FD818A96743FAB28AC221BEB4B2C8 update) I don't know what to do as I had reinstall Bitdefender in Windows 10 but was not necessary after downgrading - problematic because of the recovery should only have Windows and not restored Bitdefender done this task still pertain also to currently installed product?
Thanks in advance
I just came across another post on Microsoft Technet: Task Scheduler is broken after the downgrade from windows 10.
Dave Green - MSFT wrote a program to discover and fix problems with Windows scheduled tasks. You can find it, as well as sources and an explanation of what he done, here: https://repairtasks.codeplex.com/There is also a difficulty my Task Scheduler here called
I have not tried one of these
-
When I try to run the backup this error pops up, 'the task image is corrupt or has been tampered with. (0 x 80041321)".
I already tried the prievious solution and the first registry value is not found
Chris
Did you use a registry cleaner?
Try the solution detailed in the following link:
http://bertk.MVPs.org/html/reinstall.html
Hope this helps, Gerry Cornell
-
Error 0 x 80041321 task responding image is corrupt or has been tampered with in wit
Original title: error 0 x 80041321 task responding image is corrupt or has been tampered with.
Did you use a registry cleaner?
Try the solution detailed in the following link:
http://bertk.MVPs.org/html/reinstall.html
Hope this helps, Gerry Cornell
-
When I run the Task Scheduler which exactly follows the error message appears in a popup window: ' task32498346 task: the task image is damaged or has been tampered with. " None of the "solutions" I read on internet activity for me. Very detailed solution from Microsoft Support does work for me because the first step is to go to Task Scheduler Library and find the folder in which the corrupted task is in. I carefully searched the whole library, and there is certainly no 'task32498346' in the Task Scheduler Library. I'm not aware of all this causes me problems. Everything seems to work OK. I came just to have stumbled on this because I was curious how the Scheduler works. I looked in Services and Task Scheduler started. Despite do not cause me problems, I know, I want to get rid of this popup error message. Can someone help me, please?
(Moved to repair and recovery)
Yes. The Earth is round. Does this have to do with my question?
-> OK, I'll specify it in detail. You must search for the folder C:\Windows\System32\Tasks of the existence of the file that generates the error message, i.e. task32498346. The file may be hidden.
-
* Original title: ease of backup Windows 7
I have Windows 7 and I am unable to back up files. The following message appears: "the task image is corrupt or has been tampered with. I used an ERD without result. The application discovers not a problem. At the same time, I received a message that the Bitlocker system files could not be found. I tried Windows 10 briefly then back to Windows 7. That's when I started getting the message image corrupted
Although many people have problems when back to Windows 7 after trying 10 Windows, before you reinstall Windows 7, you can consider the rest of the steps here--> https://support.microsoft.com/en-us/kb/2305420
-
Disk defragmentation is running very slow or does not work properly under Vista
Disk Defragmenter takes a long time (more than 2 hours) and doesn't seem to work properly. I'm not sure what to do or how to report this to get help to fix the problem. Any advice would be appreciated.
Thank you
Diane
* original title - how to solve a problem with the Windows Disk Defragmenter? *
Hello
1st race SFC and CheckDisk to ensure the integrity of disk and file. It is possible that you have something
stop defragmentation run then after that these see the next message.Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlHow to difficulty Chkdsk will not run at startup in Vista
http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html================================
Here are excellent free 3rd defragmenters party which I use.
Very powerful - FREE - MyDefrag
http://www.MyDefrag.com/Defraggler - free - defragment your entire hard drive or individual files - unique in the industry.
This compact and portable Windows application supports NTFS and FAT32 file systems.
http://www.Piriform.com/DefragglerAuslogics Disk Defrag - FREE - works easily and does a great job
http://www.Auslogics.com/en/software/disk-defragAlso check out these and other "related links" here:
How to run Disk Defragmenter from the Vista command prompt
http://www.Vistax64.com/tutorials/81786-Disk-Defragmenter-command-prompt.htmlHow to change the planning for Disk Defragmenter in Vista
http://www.Vistax64.com/tutorials/72832-Disk-Defragmenter.htmlHow to have a task to wake the computer to run in Vista Task Scheduler
http://www.Vistax64.com/tutorials/166809-Task-Scheduler-wake-up-computer.htmlI hope this helps.
-
Executed with another disk defragmenter program
Hi-I have the same problems as others with this error message. But I think I know what caused it; I have upgraded to Windows 10, then when he lost all of my pictures and documents (Yes, MS remote trying to find them and could) I restored it all back to Windows 7. Fortunately, I had saved my files about 6 months, so I got most of my photos, etc. But now, I get this message "Disk Defragmenter runs with another program" and change the settings. Tried it, didn't work, so a post office tells to open Task Scheduler, so I did it, but an error pops up preventing me to go anywhere else,: the task image is damaged or has been tampered with. So, what should I do now? Thank you
Data are the only thing that makes sense for the backup. Programs (applications) must be re-installed in the newly rebuilt system. Data: spreadsheets, documents, photos, videos, music - your stuff.
Maybe you are looking for
-
Libretto U100 keyboard - need to replace it - important!
Hi someone where I can get a replacement keyboard for Toshiba Libretto U100 Model No.: PLU10E-009017EN. My current has a missing key on it and some of the keys stopped working because of the drink being hit on by children. A connected external keyboa
-
Can satellite L300-1BV - I ask Toshiba for the installation CD?
Hello How could I go ask Toshiba for the installation CD? My laptop (L300-1BV) came with the pre-installed operating system, so I can ask them for the CD?But I don't know how I'd go to this topic. Any advice?
-
How can I configure my Xbox 360 as an Extender?
How can I configure my Xbox 360 as an Extender?
-
BlackBerry Curve 8320 smartphones - Notepad
Hello Notepad in 8320 Curve works, but I can't see the note I added. Memos are there, but I don't see them unless I search that matches a memo, then it is visible. I have confirmed that there are no filters on. Any help is appreciated. L.
-
Campus Manager and member of the cluster switches
Hello I have several groups defined, all switches (commanders and members) are in the DCR with their own IP address and are managed by the RME and DFM as a stand-alone hosts. In Campus Manager, only commanders are shown, I tried to put the members in