Image path: photo to the vector

Similar Questions

• How can I change the JPEG images and photos using the program "Paint"?

  I'm taking a good picture of me with my laptop built-in digital camera, so I can use it as my avatar on my blog page.  I tried to change it and other images using the 'Paint' program, but I am not so much with things, as brighten up my eyes and my teeth by a shade or two.   Is there someone who could give me any suggestions on the best way to do it?  When I do, I do the picture of me end up looking like Little Orphan Annie.  Of course, I appreciate all the tips and help and thanks to all who respond!

  If you need a program with more options... the
  Freeware PhotoScape can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  PhotoScape
  http://www.PhotoScape.org/PS/main/download.php
  (NT/2000/XP/Vista/7)
  (the download is: PhotoScape_V3.6.1.exe)

  PhotoScape? (tutorials)
  http://www.PhotoScape.org/PS/main/help.php

  For example...

  How to whiten teeth with PhotoScape:

  Open PhotoScape and select... Editor in Chief.

  Click on the Viewer and find the picture you want to
  Ed. Left click of the photo to highlight and click on the left...
  Editor tab.

  Left click the + button to zoom in and get a good
  view of the teeth of the subject.

  Reach... Tools tab / effect brush / brighten up...

  Choose a size of brush near the size of the teeth.

  Left click / drag the toothbrush to reach...
  the brightness desired... you may need several passes
  If the result is not acceptable to the left click Cancel all
  button and try again.

  Also... you can place the brush on a tooth and the left click
  one or more times to brighten this single tooth.

  It is best to save as and give your modified version, a new name...

  See you soon

• Does anyone have the imaging software photo to the camera HP 315 copy the picture from the camera to the pc?

  I got a digital camera HP 315 (circa 2000), but without the CD-ROM containing the photo imaging software to copy pictures directly from the camera to my pc.  I installed Windows 7.  Currently, I can copy directly from the card compact flash on my pc, but it is sometimes easier to copy directly from my camera to my pc.

  Hello

  As mentioned above, the old software may not work at all. You can try the following software:

  http://ftp.HP.com/pub/softlib/software2/COL3927/SJ-13026-3/col3927.exe

  There is another way to transfer photos to your computer, because the camera uses the card see You can also its Manual:

  http://h10032.www1.HP.com/CTG/manual/bpy60034.PDF

  Kind regards

  PS. New digital cameras released each month, you can buy one for less than $100 with a better quality and faster now.

• The Images path required at the database level.

  Hi all

  Merry Christmas :-)  Well, I'm just here for the updated knowledge to find the path of the images in my database. Since I could find by Google so I felt take help here.

  Please find below the details of my version of the database and at the apex.

  BANNER

  --------------------------------------------------------------------------------

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for Linux: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Apex Version: 4.2.3.00.08

  I can find my path set by me in the Dads.conf file, but I wanted to know as - is it possible to look for the path of the image in a table or view in DB level?

  Opinions are highly appreciated.

  Thank you

  Nitesh Perron.

  in DADS configuration you mentioned is the path to the image? Then you can see the files in the folder of images!

  Please find my G drive attachment! DADS.config

• How do you control the position and size of the images, IE. photo to the printer?

  HP Officejet 8600

  Windows XP

  I'm trying to figure out how to control the position and the size of the photos or photos that are included in an email that I send to my printer via HP ePrint.

  Hello. The process that I mentioned using Word provided that if we were send emails to the printer from a computer. If you just transfer emails from the iPhone to the printer there is no option to control the position of the jpg print. This isn't something that can be handled right now on ePrint.  The attachment will be printed on a separate page. The body of the email will be printed separately of the spare part.

• It seems that wrapped text will not host photo resizing without cutting and pasting the image resized, is - what the Muse way is suppose to work?

  It seems that wrapped text will not host photo resizing without cutting and pasting the image resized, is - what the Muse way is suppose to work?

  It would be the default path to wrap the text with the image when you work in Design view.

  This document explains more:

  https://helpx.Adobe.com/Muse/using/wrapping-text-image.html

  Thank you

  Sanjit

• White Outline on outside the clipping of images pathed in InDesign

  Hello. I'm on a PC using CS6.

  I've created a few clipping paths in Photoshop on a bunch of images and most of them have a white outline (even in the overprint preview) shown in InDesign.

  I thought I have me making sure not to be too close to the border in order to not get this white outline. I created paths by using the tool palette and the path of pen.

  Please take a look at the screen captures below and I was wondering if anyone has this problem or if something escapes me completely.

  As you can see in this photo the white contours are around the box and especially the chocolate pieces. This is a page of InDesign.

  

  This same image below appears in Photoshop with a black rectangle placed behind it and I do not see the white outline. The sketch is in the PDF file too when exporting, so I don't know what to do and I'm worried it will print that way. Never had this problem before...

  

  Next to the other answers:

  Softens the edges look more naturally, said, use without cutting paths, would use the alpha transparency (masks, layers with transparency, etc.).

  Place the file as a Photoshop PDF or PSD layers in InDesign. Results would improve.

• How read the images path ' in the stored catalog?

  I'm really new to an attack development, and LR. I have a problem to find the right methods to run my intentions.

  I would get the paths real pictures in the catalog, so that my external plugin can be used for further processing.

  [I don't know Lightroom stores catalogue on behalf of C:\Users\[user] \Pictures\Lightroom\Lightroom 5 Catalog.lrcat. But I want to get the real path to each .jpg inside this catalogue and write this path in a simple file (for example, .txt) where my plugin can read the path and use the images chosen by the user in LR.

  
  

  Then my plugin stores the images processed with tags in a file that should be read by LR. I don't know if it's that easy. Perhaps, he should create an additional collection for the catalog?
  

  The thing is that the Lightroom 5 manual is not really useful. And it would be great if someone could help me.

  You can obtain the path of a picture with photo file system: getRawMetadata ('path').

  Plugins can add new pictures to the catalog - see catalog:addPhoto ().  All the metadata in these photos will also be imported into the catalog.  In addition, a plugin can add additional metadata using the methods supported by the LrPhoto class.  However, these methods are incomplete infuriatingly - for example, there is no way to change the capture time.

  If you have more specific questions, get out of here.

• An excerpt from CAN (can edit, change, etc.) created from a trace of the image paths? (CS6)

  Hiya Adobe community,

  This might me up a little, but a long time ago I used to use Freehand as my defacto design tool until I went to I. At that time, I also used "Rationalize" (http://www.adobe.com/products/streamline/) to perform the functions track image is today. While its results were a little rough, the software gave me the vector points, paths and acnhors that I needed. After all the traces, I could manually change the vector traces resulting.

  I have been using the CS6 tracing feature, but the only thing I can't understand for the life of me is the question of the "bounding box" for an imported picture. Whenever I have draw a drawing, tracing of AI results always placed a bounding box around the area of the vectorized image. My goal: to locate an item, get rid of the bounding box and extract contours and paths so that I can then change to my link.

  Is this possible? Im sure it is possible... I can not find how. (Or I do the wishes of crack?) Everything I have said, if Streamline allowed me to change the track paths, so it would be a shame if AI CS6 is not.

  See the image attached for some content. Thanks in advance for any help!

  

  Select your tracing and go to the Image Trace > Expand

  You may also then dissociate
  

• Resize the photo but not the vector mask?

  If I use a vector for a picture of drawing as a mask, can I then change the picture and hide individually?

  There is a point in the center of the photo which allows me to move the mask, but how can I resize the photo without resizing the mask and resize the mask without resizing the photo?

  Thank you

  Hold down the Alt/Option + click this point blue Center to move/adjust the mask without worrying if the thumbnail of the layer is active.

  Regarding resizing regardless of them, I'm not aware of all the shortcuts except for:

  Decouple (click/enable/disable the link between the thumbnail of the layer and the mask thumbnail)

  Select the thumbnail of the mask.

  Change the values (W/H) in the PI. (You can also do the same thing here for the active layer thumbnail)

  Here is a tip that I use a lot of the time:

  Use AutoShapes like masks. It is those who have points in the canvas "controller" that allow to resize, change the angles etc.

  Example:

  A. open/import an image file.

  B. Edit > cut the image/bitmap to the Clipboard.

  C. adding a Rectangle object rounded on the Web and have it active before moving on to the next step.

  D. Edit > paste inside the contents of the Clipboard (the image).

  The result is your image with the a vector mask was consistent with the auto shape (in this case, the rounded Rectangle).

  That's the problem - select the vector mask thumbnail and you will see again "anchor controllers" there: resize and corner radius.

  h

• How to place images and cultures to fit inside the vector form

  I am trying to place an image on top a vector shape and then I want to cut the edges of the image, it takes this form (essentially by filling in the form with the image)

  I try also to do with two layers of vector shapes, I want to install into one another and did not all block... the top or 'form fill' is an array of hexagons (make a honeycomb like structure) I want he made in the underlying (lime green) oval shape.  Here is a link if you want to see what I'm doing... It's the one on the right

  
  

  www.oregonstate.edu/ ~pearsoan/images/achieve3.ai

  How do you do that?

  Blue,

  Put the (vector) path formatting on top of the image, select both and opposition > clipping mask > make.

  I can't open the file to see what there is to see, and I have to go in a moment.

  If you upload an image, using the camera icon, all wizards can see here in the thread.

• I cannot share the images and photos on flickr

  Only after the export of images to another can folder (on the desktop to facilitate the conclusion) I upload to steal flickr account.

  On the old iPhotos, I used to click on share and there they went.

  I want to download on flickr via sharing.

  I have account in internet accounts.

  Why you can not export? What's happening exactly and this error you get?

  Of helo Photos - a good place to look for help with Photos

  You can publish your photos and video clips directly from Photos on your Facebook, Flickr account, or Twitter account.

  Note: When you publish a picture live on Facebook, Flickr or Twitter, Live Photo is transferred as a still image only.

  Open pictures for me

  Login to your Facebook, Flickr or Twitter account

  Publish your photos and video clips on Facebook

  1. 
  2. 

  Publish your photos on Flickr

  You can share your photos online by publishing directly from Photos on Flickr.

  1. Select the photos you want to publish.
  2. Click on the Share button in the toolbar and choose Flickr.
  3. If the pictures asks you to connect to your Flickr account, enter your account ID and password, and then click Sign In.
  4. In the Flickr dialog box, choose options for the photos.
     • Choose a place to add photos: Click the menu drop-down select Photo set and choose a set of photos (what Flickr calls an album). To add your photos to your Flickr Photostream, choose Photostream.
     • Choose who can see the photos: Click on the drop down at the top right.
     • Add a title, description and tags: Type the text in the fields.
  5. Click on publish

  LN

• WHY THE PHOTOS KEEPS 2 IMAGES IN A SINGLE ALL THE PHOTOS AND THE OTHER IN MY FILE, I DID?

  I STARTED WORKING WITH PHOTOS. I WAS PUT IN FOLDERS AND ALBUMS, BUT I NOTICED THAT THE PHOTOS ARE ALWAYS IN THE TOP FOLDER THAT SAYS THAT ALL IMAGES?  WHEN I TRIED TO DELETE ONE OF THEM IN ALL THE IMAGES IT WOULD ALSO REMOVE IN MY FOLDER?  WHY ISN'T GOING TO BE DOUBLING YOUR SPACE?

  1. you need to fix your cap lock - ad in capital letters is rude and very difficult to read

  2. you need to learn how to post - you posted a question of photos in the iPhoto forum - towing totally different programs - I ask that your message be moved

  3. you need to learn how works photos - he is a database application and has no duplicates - all photos are in a library, and can be seen in different ways, but not matter how manny albums (once more records cannot view pictures, albums can only) a photo is in there is no duplicates - just different views of the only picture in the library - multiple windows in the same room

  LN

• Previously, during display of the image (photo) in the tab, it displays the resolution of the image, how to recover the photos (pictures) display resolution?

  Previously, during display of the image (photo) in the tab, it displays the resolution of the image, how to recover the photos (pictures) display resolution?

  You bring up the title bar via the "Title bar" button at the bottom left in the palette to customize window

  • Firefox menu button > customize > title bar
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox

  

  See also:

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox

• Delete all the images and Photos into folders, I create

  OK, I can't leave the Photos to manage my pictures for anything other than editing.  I have a backup hard drive which has thousands of photos I worked tirelessly to organize into folders that make sense to ME (as well as for my wife).  Because of my organization, with any windows machine, it's easy for me to import them from my iPhone in a folder on the desktop, then the name or the tag and move these photos on this windows computer records, as well as on this hard drive.  It is a breeze to find an image or an object with a lot of different pictures, I'm the one who ranked.  It is a breeze to do a mass deletion, or a mass move if I decide to change the category of several images.  However, with Photos, just try to move pushes to hell.  Not to mention the fact that IF someone were to have access to my Mac without my permission, if they wanted to look at my pictures and videos on all of them would be in pictures to facilitate navigation.  There are a lot of photo work that I don't want anyone other than myself, my wife and occasionally a customer that the photos are to have access to the as they may contain confidential information or even to design prototypes.  WHY can't Apple let me manage my own photos?  I'm not griping about photo editing features, I find them to be good for the most part.  I want to just connect my iPhone and copy all the pictures out of it in my own folder structure and remove them from the phone.  If I need to change the one I can still do from the phone or Photos if Photos then would allow me to remove this image pictures and put it back in my files.  Please tell me that someone else out there has a similar desire and figured out how to do this...

  WHY can't Apple let me manage my own photos?

  No problem just don't do the - Photos is completely optional

  Apple provides Photos for people who want a modern photo management with workflows without loss with database capabilities and the Image Capture (or do the PC way and use the finder) and listen to samples for those who don't want an up-to-date Digital Asset Manager like pictures and prefer to handle the files rather than photos - use either or any third-party solution you like best

  But you can't do what you want with Photos - you must use the correct software for your personal desires and is not pictures

  LN