image path problem

Similar Questions

• restore failed - cannot find image path path:c:\images_tmp_dir\install.wim HELP my old crushed drive

  my old drive crashed bought a new and the 5 CD to recover at acer until I installed the cd, that I could get in the bios. Now nothing and I still get the evertime following error, he manages at the end of the installation of recovery disk 3

  restore failed - cannot find path:c:\images_tmp_dir\install.wim image path

  I used Rufus and yes I changed my BIOS, but I had read I need to change the format of my flash to fat64 which I just did, now I'm a new attempt to restore the ISO.  I'll let you know if it works.

• Bad path problem, but how to fix?

  Hello
  
  If you go to http://www.enhancedwireless.net/Opportunities/manufacturers.shtml and select one of the sub menus under "Manufacturers" you should get a screen password challenge - click Cancel and you should get an authentication page. Now at the bottom there is a library item with 5 menu items dealing with all other pages, but this one.
  
  It must be a path problem, but I tried... /... / Library/footer, I tried... / library/footer, I tried/library/footer and I always get page not found when I click on any of these 5 points... there still place these links in the record of the manufacturer called opportunities, but it should link only to the correct page outside the opportunities folder.
  
  Thoughts?
  
  Thank you
  
  KO

  OK it's fixed... I changed all links to "/" only and kept the... / library has and it works now, thank you very much

  KO

• image size (path) problem.

  Hello forumers.

  IM-exporters a path from illustrator into photoshop and the path are 800 X 600 and fits perfect where I want ot adjust it.

  I export the same path in after effects add my 3d racing, and then when I export as an image sequence of the half of the way.

  is my composition set to 800 x 600 then why is half of the path?

  Thank you.

  I found your post a little hard to follow, you made sure that your render settings have been set to return at full resolution, rather than half of the resolution?

• Image & amp; Media path problem

  Just installed DW CS3 (improved in DW8) and now, whenever I try to insert an image or a SWF in a simple HTML page, DW gives me a bunch of code directory trash at the front and the back of my path to the image.
  I use relative-to-document paths. Code example below. The first img src line, that's what generates DW, the second line of (good) img src is my typing the code directly.
  I paid on my preferences, etc... trying to figure out if I just something set up wrong. I'm just a graphic designer and I'm a little shaky under the hood, but I can't find something I am doing wrong.
  DW CS3 on MacBook Pro with Leopard.
  Thank you all for any help.
  
  
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  "< html xmlns =" http://www.w3.org/1999/xhtml "> "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"
  < title > Untitled Document < /title >
  < / head >
  
  < body >
  
  "< p > < img src="./?/HTML/images/old_stamp.jpg?/HTML/images/old_stamp.jpg?/HTML/images?/HTML/images "/ > < / p >
  
  < p > < img src = "images/old_stamp.jpg" > < / p >
  
  < / body >
  < / html >

  Well, I'm a fool. But maybe this discovery will help a designer similarly distraught in the future.
  What I found, after an hour of pulling my hair, it's one of my HTML directory parent folders contained a question mark in his name. While OS X is fine with that, Dreamweaver is not. Once I renamed the folder enclosing without the "?" and rebuilt my HTML files, everything was fine.
  Thank you.

• System vi exec path problem

  Hello

  I have a problem with the exec system vi. As a first step; program work and the reason why I write here is what I want to do a little more functional program and remove an annoying bug.

  My front panel consists of two buttons, two controls of path, control of an image and a single string indicator. I intend to use this vi to enumerate CCD cameras on my computer, select on of them and acquire an image and then display them on the front panel. This is accomplished by the two external exe files calls via the exec system vi command. In the block diagram, I arranged the two calls into a structure of event encapsulated by a certain time so I can make calls during execution using two loop buttons.

  The first button is used to acquire images of a CCD camera. When I push the first button ('acquisition') the path of the first control path (pointing to the executable file of the program acquisition) is sent to an exec system vi (the path) and the separate folder name and collected image is then displayed in the controller of the photo.

  The second button is used to list the cameras available on the computer. In the same way that through the acquisition of power to an another exec system the chain of path from the second controller path is vi that lists the cameras and displays them in the text box.

  Now to the problem. When I start the program I select the two executable in their respective path controls, for example the exe of CQI, followed of the exe of the enum. If I press the CQI exec system VI associated with this path is started and the image appears. If I then press the button enum cam I get a file dialog box that wants me to locate the executable enum (even if the correct path is specified in its corresponding path control). If I select the path (again) when the dialog box is prompted the program works very well and the cameras listed are presented in the indicator chain. But if I now press the purchase button a dialog box if poster asking me to locate executable CQI and when I do, the CQI works very well, but yet, I can't list the cameras until I specify this control of trajectory.

  So, it seems that the correct loading of an exec system depend not only on the provided path, but also the path most recently loaded to any control of trajectory if there are several system exec.

  I am grateful for any help provided. Hope my question is clear enough and not specific.

  I run labview 8.6

  / Mikael

  You are stripping the path you're providing and send just the name of the file in the command line. This assumes that the command window has the defined PATH environment variable so that the executable can be found. You can't assume that. You should be by specifying the full path to the executable file as the command line. Be sure to include the path in quotes.

  A comment about code: what's the point of this loop? It doesn't do anything. Or the frame of the sequence. You don't want a structure of the event to be stowed until something happens. If you start something that could take a long time, then you should look through architecture such as the producer and consumer. You want the structure of the event to finish quickly, so you can continue to respond to the events.

• Invalid Image path

  Hello

  I started having a few problems icon with an existing working version of my application that has already been built and uploaded to Apple without problem. When I now build this, I get the following errors of two icon;

  ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"

  ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"

  I managed to build and release this same .zip (expect a version and the version code change) in mid-August, but he now will no longer build. I have run back through aid and checked my path to icon, everything seems in order (and all the other icons are working / not to Miss).

  As follows, the referenced files in the config.xml file are different from those that Apple reported lack;

  < platform name ="ios" >

  <!-iPhone Spotlight and icon settings->
       < icon CBC = "res/icon/Icon-Small.png" width ="29" height ="29" />

       < icon CBC = "" res /icon[email protected] " " width ="58" height ="58" />

       < icon CBC = "" res /icon[email protected] " " width ="87" height ="87" />

  ...

  <!-IPad Pro->
  

       < icon CBC = "res/icon/Icon-167.png" width ="167" height ="167" />

  </ platform >

  I'm not referencing or other icon files Apple claim are missing for example; "[email protected]" and I can't that assume it is something BMPS incorrectly adds to my package when compiling?

  Note:

  I checked the build log and it seems to ignore my request for [email protected] one copy only the small and the small@2x:

  CopyPNGFile build/myapp.app/icon-small.png myapp/Resources/icons/icon-small.png

  / Project CD

  /Applications/XCode.app/Contents/developer/usr/bin/copypng-Compresser /project/myapp/Resources/icons/icon-small.png /project/build/myapp.app/icon-small.png

  CopyPNGFile build/myapp.app/ [email protected] myapp/resources/icons/[email protected]

  / Project CD

  /Applications/XCode.app/Contents/developer/usr/bin/copypng-Compresser/project/myapp/Resources/icons/[email protected] /project/build/myapp.app/ [email protected]

  Does anyone have any ideas or suggestions?

  See you soon.

  PS: PGB - app id is; 2244914

  Fixed - I was still building with an older version of Phonegap (5.4.1) for plugin compatibility and have increased now that 6.3.0, it includes such icons as expected.

  My guess is Apple now requires these files (from my generation) and Phonegap did not know what were these the 5.4.1 version.

  See you soon,.

• Try to upgrade a PES 10 catalog Lightroom CC - problem: conversion file path problem [was: upgrade Photoshop elements catalog]

  Update 20150707:

  So I think I found the reason for the problem:

  About 60% of my files in my catalog of PES 11 are converted (or probably better: "sent") to Lightroom with a double slash "/ /" in the path of the file.

  This looks like: D:/photos/ /Keep, albums, 2002, 200212 < the rest of the way is OK >...

  Lightroom complains that it cannot find the file on the disk, probably because of the double slash.

  With more than 4,000 theses error Lightroom core dumps with a buffer overflow, probably due to the large number of error messages. Cup of the catalogue of PES 11 decline little by little I managed to identify the cause.

  The problem is that my PES 11 catalog is repaired, optimized and PES 11 think that the file is in the correct location and can open and edit it.

  So what do I do to make the two programs to understand each other with their file name conventions? ... or how to get rid of the second crime "/"?

  Thank you

  Thomas

  ---

  Good afternoon

  I'm trying to upgrade a PES 10 catalog Lightroom (Lightroom details below) CC - both on Windows 8.1 (details below as well)

  There are about 30,000 photos in the catalogue of PES 10. Import runs for awhile then LR CC shows a short message that it could not import all of the photos and then it is intercepted by a Windows operating system message that indicates «Lightroom has stopped working...» »

  He has imported about 3,500 photos and converted all the photos of Collections, but also in the tree of the key.

  I tried the following:

  (in PES 11)

  • optimized and repaired the catalog
  • removed all files types that LR does not support
  • removed all media offline

  (in LR cc)

  • Tried running in different compatibility modes
  • Tried running in administrator mode
  • Temporarily disabled any antivirus software

  I run LR CC successfully with a new catalog and it behaved very well through all operations. TI ROM dumps on the conversion of this catalogue. Importing photos from the catalogue above works fine hierarchy; just that it loses the key word and obviously knows no collections.

  Is there any log file indicating the element involved the conversion?

  I have to say that I love LR after a period of three weeks of the trial, but I'm not really ready to let go hold on 90% of my data meta at this stage.

  Best

  Thomas

  System Info for LR and PSE

  ---

  Version of Lightroom: CC 2015.0.1 [1018573]

  License: Trial

  Operating system: Windows 8.1 Business Edition

  Version: 6.3 [9600]

  Application architecture: x 64

  System architecture: x 64

  Number of logical CPUs: 4

  Processor speed: 3.1 GHz

  Built-in memory: 16199,9 MB

  Real memory for Lightroom: 16199,9 MB

  Real memory used by Lightroom: 364.6 MB (2.2%)

  Virtual memory used by Lightroom: 314,3 MB

  Memory cache size: 185.7 MB

  Maximum thread count used by Camera Raw: 4

  Camera Raw SIMD optimization: SSE2, AVX, AVX2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1200, 2) 1920 x 1200

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  Check the supported OpenGL: failed

  Vendor: Intel

  Version: 3.3.0 - Build 10.18.10.3345

  Renderer: Intel(r) HD Graphics 4600

  LanguageVersion: 3.30 - Build 10.18.10.3345

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\behreth\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\behreth\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Facebook

  (4) Flickr

  (5) attachment Plugin Leica

  (6) home Plugin Nikon

  Config.LUA flags: None

  Update Kit: Adobe Camera Raw to Lightroom 6.0 9.0 (build 1014445)

  Update Toolkit: book Module 6.0 (build 1014445)

  Update Kit: develop Module 6.0 (build 1014445)

  Toolbox update: Import Module 6.0 (build 1014445)

  Updated Toolkit: library Module 6.0 (build 1014445)

  Update Kit: Card Module 6.0 (build 1014445)

  Update Toolkit: monitor Module 6.0 (build 1014445)

  Update Toolkit: print Module 6.0 (build 1014445)

  Update Toolkit: Slideshow Module 6.0 (build 1014445)

  Toolbox update: Module Web 6.0 (build 1014445)

  Update Kit: com.adobe.ag.AgNetClient 6.0 (build 1014445)

  Update Kit: com.adobe.ag.AgWFBridge 6.0 (build 1014445)

  Update Kit: com.adobe.ag.Headlights 6.0 (build 1014445)

  Update Kit: com.adobe.ag.LibraryToolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.MultiMonitorToolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.archiving_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.bridgetalk 6.0 (build 1014445)

  Update Kit: com.adobe.ag.catalogconverters 6.0 (build 1014445)

  Update Kit: com.adobe.ag.cef_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.coretech_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.curculio 6.0 (build 1014445)

  Update Kit: com.adobe.ag.discburning 6.0 (build 1014445)

  Update Kit: com.adobe.ag.email 6.0 (build 1014445)

  Update Kit: com.adobe.ag.export 6.0 (build 1014445)

  Update Kit: com.adobe.ag.ftpclient 6.0 (build 1014445)

  Update Kit: com.adobe.ag.help 6.0 (build 1014445)

  Update Kit: com.adobe.ag.iac 6.0 (build 1014445)

  Update Kit: com.adobe.ag.imageanalysis 6.0 (build 1014445)

  Update Kit: com.adobe.ag.layout_module_shared 6.0 (build 1014445)

  Update Kit: com.adobe.ag.pdf_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.sdk 6.0 (build 1014445)

  Update Kit: com.adobe.ag.sec 6.0 (build 1014445)

  Update Kit: com.adobe.ag.socket 6.0 (build 1014445)

  Update Kit: com.adobe.ag.store_provider 6.0 (build 1014445)

  Update Kit: com.adobe.ag.substrate 6.0 (build 1014445)

  Update Kit: com.adobe.ag.ui 6.0 (build 1014445)

  Update Kit: com.adobe.ag.video_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.xml 6.0 (build 1014445)

  Update Kit: com.adobe.wichitafoundation 6.0 (build 1014445)

  Map #1: Vendor: 8086

  Feature: 412

  Subsystem: 204a 8086

  Review: 6

  Video memory: 96

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  ---

  10.0.0.0 elements Organizer

  Basic version: 10.0 (20110914.m.17521)

  Language version: 10.0 (20110914.m.17521)

  Current catalog:

  Catalog name: fitt_master_backup

  Catalog location: C:\data\pse11_catalog\fitt_master_backup\

  Size of the catalog: 135, 8 MB

  Catalog Cache size: 1, 1 GB

  System:

  Name of the operating system: 2000

  Operating system Version: 6.2

  System architecture: Intel CPU Family: 6, model: 12 Stepping: 3 with MMX, SSE whole, SSE FP

  Built-in memory: 15, 8GB

  Free memory: 4, 9 GB

  I found the reason, but there is no solution...

  Comments:

  The double slash ' \ ' in the path appears to be introduced with the upgrade to PSE10. I can't say how it happened, but there were about 27,000 files connected by an access path "D:\pictures\\album\portrait\image_1.jpg".

  Fortunately, I worked with this database, as in fact all files could be catalogued, modified, opened with the editor. I checked from time to time for "Missing files" and none has been identified. After I discovered the problem during the conversion of catalogue Lr, I checked the display "File Location" and none of the files with the double slash are recognized as part of the catalog. I could import into the catalog of the "location of the folder" producing duplicates:

  'D:\pictures\\album\portrait\image_1.jpg '.

  'D:\pictures\album\portrait\image_1.jpg '.

  live happily next to each other.

  I could "move" the wrong file in the thumbnail view in its original, which corrects the incorrect path. But as my collection is well distributed on a large directory structure and there is no way to sort way "thumbnail" it would be a never-ending task.

  Here are the steps I took to fix the problem. It was not as simple as it sounds by

  now and took a lot of trial and error for weeks.

  1. I made a backup of the catalog PSE10 ("File-> backup catalog..") hard disk
  2. I have 'removed' photos from their original location, so that they could not be found (as I had a distinct data reader, I just removed the drive letter in the Windows Disk Management Console)
  3. I restored the backup PSE10 ("File-> Restore Catalog... "), choose 'new place' and placed in the root of a different drive. If you do not have a spare laptop drive, you can use the "subst q: ; I had hoped to keep the structure of the root, it is easier for the PSE10 to reconnect files later, but I can't confirm that it makes a difference.
  4. After restoring PSE10 complained (thankfully!) could not find any files (27,000) with double '-', so, unlike the situation at the beginning, I could now chose "file-> reconnect-> all missing files. He tried to find the files, but he could not find them in the area returned after searching for 5 minutes for the first file. Then I reconnected a file manually and restarted the process and after 1 h PSE10 had reconnected all files without any problems, and the images appeared as well in the 'file location' display.
  5. As I wanted my files in their original location, I "return" the files in their original location by moving them in the 'File location' view, which took another 3 hours.
  6. As I was not very confident with the whole process ensuring all files have actually been part of this process, I closed 10 PSE and "reinstalled" my original tree together file pictures of the "retired" location (step 2) after you delete the files moved PSE10.
  7. I grew up PSE10 and checked for missing files, everything was still connected.
  8. Finally I re-imported the tree of the original files 'reinstalled' together again to see if something is missed, but all files have been correctly identified as duplicates. The final step was to validate "File Location" view, where are the files appears in the tree structure tight.

  Then, I did what I wanted finally to update the catalogue of PSE10 to LR6 and it worked without any problems take images and metadata across.

  Fact.

  A plea to Adobe...

  I think it would be a great idea to publish catalogues different proprietary formats (PES / LR). This

  cannot be that difficult because you must have appropriate documentation. In this case the problem could be

  solved with double '-' setting programmatically. If you think that your customers entrust their digital

  assets on your cloud, some "opening" your end would be just one...

• White Outline on outside the clipping of images pathed in InDesign

  Hello. I'm on a PC using CS6.

  I've created a few clipping paths in Photoshop on a bunch of images and most of them have a white outline (even in the overprint preview) shown in InDesign.

  I thought I have me making sure not to be too close to the border in order to not get this white outline. I created paths by using the tool palette and the path of pen.

  Please take a look at the screen captures below and I was wondering if anyone has this problem or if something escapes me completely.

  As you can see in this photo the white contours are around the box and especially the chocolate pieces. This is a page of InDesign.

  

  This same image below appears in Photoshop with a black rectangle placed behind it and I do not see the white outline. The sketch is in the PDF file too when exporting, so I don't know what to do and I'm worried it will print that way. Never had this problem before...

  

  Next to the other answers:

  Softens the edges look more naturally, said, use without cutting paths, would use the alpha transparency (masks, layers with transparency, etc.).

  Place the file as a Photoshop PDF or PSD layers in InDesign. Results would improve.

• How read the images path ' in the stored catalog?

  I'm really new to an attack development, and LR. I have a problem to find the right methods to run my intentions.

  I would get the paths real pictures in the catalog, so that my external plugin can be used for further processing.

  [I don't know Lightroom stores catalogue on behalf of C:\Users\[user] \Pictures\Lightroom\Lightroom 5 Catalog.lrcat. But I want to get the real path to each .jpg inside this catalogue and write this path in a simple file (for example, .txt) where my plugin can read the path and use the images chosen by the user in LR.

  
  

  Then my plugin stores the images processed with tags in a file that should be read by LR. I don't know if it's that easy. Perhaps, he should create an additional collection for the catalog?
  

  The thing is that the Lightroom 5 manual is not really useful. And it would be great if someone could help me.

  You can obtain the path of a picture with photo file system: getRawMetadata ('path').

  Plugins can add new pictures to the catalog - see catalog:addPhoto ().  All the metadata in these photos will also be imported into the catalog.  In addition, a plugin can add additional metadata using the methods supported by the LrPhoto class.  However, these methods are incomplete infuriatingly - for example, there is no way to change the capture time.

  If you have more specific questions, get out of here.

• How make for the image path full output for recorder/console

  Hi all

  I'm just starting getting my hands dirty with the lr sdk and could do with a little guidance.

  For a part of a plugin, I need to retrieve the path complete to each image, and well I can achieve what I want I fight to print the path to the console log / and can not understand why.

  Here is a snippit of code to illustrate things:

  for photo in exportSession:photosToExport() do 
  
       filename = photo:getFormattedMetadata( "fileName" )
       outputToLog( filename )  -- Works as expected
       folderName = photo:getFormattedMetadata( "folderName" ) 
       outputToLog( folderName )  -- Works as expected
  
  
       local path = LrPathUtils.standardizePath(photo:getRawMetadata("path"))
       outputToLog( path ) -- Output is always blank
  
  
       -- and yet when passed to exiftool the path is correct and works as expected
  
       LrTasks.execute("exiftool  -Copyright=\"Imaginary person\" \""..path.."\"")
  
  
  
  end
  

  Basically, I can get the path and use them as part of a command, exiftool, but cannot work, how the path to the log console to output debugging purposes. Am I missing something simple, or is it a voluntary limitation?

  Any help much appreciated.

  I don't know what the problem is. What camera you're out in?

  i.e. have you tried logger: enable ("logfile") - that works for me in OSX to save to a file.

  Here is the code I use:

  Self.Logger = LrLogger (logName)

  function local logToFile (msg)

  local f = io.open (self.logFilePath, 'a')

  If f is nil then

  Debug.pause ('failed to open log file', self.logFilePath)

  return

  end

  f: Write (LrDate.timeToUserFormat (LrDate.currentTime (), "%-% m-% d % H: % m: %s"), "", msg, "\n" ' ")

  f: Close)

  end

  If self.verbose then

  -self.logger:enable ("logfile") - check all in the log file.

  Self.Logger:Enable (logToFile)

  on the other

  local = {}

  -debug output is removed when you don't sign in details

  trace = logToFile,

  Info = logToFile,

  warn = logToFile,

  error = logToFile,

  fatal = logToFile,.

  }

  Self.Logger:Enable (interventions) - remove trace & debug.

  end

  R

• Illustrator CS6 - Image path (sketch)

  I'm sketching an image. In photoshop, I found the edges (save), and then opens the image in illustrator and made image trace. I got an image perfectly described.

  The problem: I can't get the same results with only illustrator image trace.

  I changed the settings to advance a few times to get the same result, but without success. Corner and threshold settings are ok, but I get more paths and noise I want, with the settings at the bottom/1 respectively.
  I also tried the grey setting range since the image is often gray, expand, etc., but no dice).

  Can you help me?

  Hi Jholland83

  Have you tried the following combination in Panel of track of the Image :-->

  (1) trace the image with "Outline" preset

  (2) increase the number of roads and corners at 100%

  (3) reduce the 'noise' 1px

  (4) now try to increase the value of the 'threshold '.

  Maybe you can be closer to your desired result.

  ~ MBM

• Path problem

  It seems that all my problems are focused on the path.

  
  

  Forgive if I seem to ramble.  I will try to give every piece of relevant information that I can.
  

  
  

  I have a client who uses InDesign-a program I'm familiar with.  When we give them pictures, they asked:

  Hair to high resolution (1.) and JPEG low resolution
  

  Two sets of clipping images (2).

  (3.) silhouetted images on and fall on a white background.

  
  

  That's what we give them.  However, the customer has a problem with JPEG files when they are imported into InDesign.  According to her, they appear as only channels and the image is gone.  After a bit of research (I couldn't find something that describes his problem) I advised him to try to disable the paths through InDesign (object > mask.) Choose 'None' from the Type menu, and then click OK.) as starting point for troubleshooting.  It worked for him and the image reappeared, but since she made a catalogue, she won't do that every time.

  
  

  The customer wants these files in jpeg form.  She uses the JPEG format for the files .fpo.  She would prefer that this problem resolved on my end, but I am barely literate in InDesign. I read a few places that the clipping paths do not work on the JPEG files in InDesign, but I don't know if it is out of date info.

  
  

  No one knows what is causing his problem?  Does need a clipping path to a jpeg that will be used in a .fpo?  How can I fix this in photoshop?  Is it possible that it could make a global correction for JPEG images in his possession to prevent this?

  
  

  Any help would be greatly appreciated.

  French Polynesia?

  French Polynesia = for position only!

  She doesn't have to do because it can bind files and so only a preview is created.

  In Design what she wants to do is probably choose for the preview is choose high quality.

  As often sloves display problems.

• Background image path changes model

  I have a model that I created, but whenever I try to create a new page in this model the path to the background image changes automatically causing it to disappear.
  
  The model shows this path:
  
  {body
  background-image: url (.. / img/bg.gif);
  background-repeat: repeat-y;
  background-position: center;
  background-color: #E8F1FA;
  }
  
  While the page created from the template shows this path:
  
  {body
  background-image: url (file:///B|/Web Development/website/img/bg.gif);
  background-repeat: repeat-y;
  background-position: center;
  background-color: #E8F1FA;
  }
  
  What is the cause? Thanks in advance.
  
  

  You are the man! Who took care of the problem of IE! Thanks a BUNCH! I went to the page of a million times and never seen that.

  I think that he has fixed the "bg.png" problem as well.

  Thank you, again, man, I can actually sleep tonight. I fought this thing for weeks.

• disable hardware acceleration set my image loading problem. is there another way to get around this?

  System details:
  OS: Windows 8.1 Professional (64-bit)
  Graphics card: PNY NVidia GT 610 (2 GB)
  RAM: 5 GB
  Firefox version: 36.0 (32-bit)

  Since yesterday, when the images would load on Web sites, some of them would be entirely black, or black for the most part, with only a piece of the images loaded, only to fully charge a few minutes later.

  Disabling hardware acceleration has solved this problem, but reduces the overall performance of firefox. Is there another way to work around this problem, not to mention that disabling hardware acceleration?

  Note: The only 2 things I have tried have been reset firefox and a new installation of firefox. I don't want to lose my data of the addon and the custom settings of firefox, because it takes too much time for me to put them back where they are now.

  I'm also pretty computer savvy, if you can get quite technical with me. If I don't understand something, I ask.